Ok,
How should I do to "Share" an dir on my Wizard so a computer on the LAN can access it with \\myipadress\share ?
And how do I get access to a share from an other computer on the LAN?
And is there any good apps that let me run a webserver & ftp server on my Wizard?
Thanks!
// MIKKE
i dont think you can share folders on your wizard and connect from a PC.
You can connect to shares on your PC "from" your wizard though over Wifi. You can easily do it using resco file explorer, just make sure your wizard has an ip address from your wireless router.
You can use ShareIt FTP as an FTP server on your pocketpc.
http://www.noisette-software.com/products/pocketpc/ShareIt/
If tou want to share via HTML, get PicoWebServer, it is free.
http://www.newmad.se/picowebserver.html
Aikon
Hey Aikon
Its possible to install apache, mysql, php and some libs on Wizard?
Br
Related
I had a JasJar and before it PDA2k and with both I could not mount network shares on my local home network. I write the address in file explorer in the format \\10.0.0.23\share where the share share does not even have a password and is share to everybody and the phone can not recognize the share.
It does see other devices on the local netword for example it can browse the Internet and access my routers web based admin but not the share.
Other computers on my home network can access the share.\
I heard there are programs that help in doing this, but is there no direct or free way to do this?
Try using Resco File Explorer in which you will be able to map shared network folders and then you can access them from File Explorer directly, it even support possword protected shared items.
Im using the standard file explorer, it works fine. I start by typing \\P4 which eventually shows my shares, and then I can navigate as I want.
Cheers
Nasdaq
still can not connect to share
Nasdaq, which version of windows do do you have the share on. Are there any special settings?
It gives me "network path was not found" always then "Network resource can not be found or you do not have the permission to access the network".
The share has no password, on windows it just logs me in without any further input.
I am using the openpath in the file explorer.
May be you need to check once again about IP Addresses and Default Gateway settings, which is not allowing you to connect with your LAN.
--Universal can't connect to Windows Server 2003--
Cant map to a Windows 2003 Server share? Is it also a Domain Controller? Check the server for
start / programs / administraton tools / Domain Controller Security Policy
Then check Local Policies / Security Options :
Microsoft Network Server: Digitally sign communications (always)
change to disabled
that will stop your universal from accessing a share normal windows machines can access.,.
Access shares problem is on Windows XP
This problem is on WindowsXP share not on windows server.
Also the imate can access the Internet and even the administration of the router, so I gues it has full TCP/IP abililty.
Are there any workgroup settings that I need to do?
Sorry for not getting back earlier, my share is on an XP sp1 box.
What I would REALLY like to do is browse my Exec over wifi from my PC. :?
Cheers
Nasdaq
Anyone got any other advice on this one?
Can't access my network shares with //192.168.0.1/ etc either?
Thanks
M.
I can't access shares by using the IP, I have to use the name of the machine: \\azhad instead of \\10.168.2.158
Azhad
Hi Guys,
what is this sharing stuff u r talking about?
Please excuse me for this newbee question but i want to know about what sort of sharing etc can i do with my Exec and Laptop, like exploring files on laptop from Exec or other way around?
My laptop has Windows XP sp2 and i use wireless router to share my broadband
many thnx......
Jatt
Try this up
I had the same problem accessing network shares on my Universal...
I was also typing IP address in Resco Explorer and it was not working.
But I could make it work using the computer name. I have no idea why it work whil with basic ip address it couldn't, but at least I am able to browse my computer folder and play video files.
So try using "\\computername\share" to see if it's working.
forrest.
I tried
I tried doing that, using the computer name. It takes more time to tell me that it can not access the server.
I think that to resolve the name of the computer it needs a wins server, is that correct?
Could it also be in your network settings if you set your network as internet or connects to work?
to Jatt
Jatt theoretically you should be able to create a network share on any computer on your network and be able to access it on your phone. This is really handy since you would not need to activesync to exchange files.
But note that for JasJar/Exec or any WM5 device you can not sync over the network just share files.
To ehabh
Thanks for trying to help me out but can u tell me how do i create a network share on my computer? please
Thanks again
Same problem
I've got the same problem. I can connect to the internet through my router but for the life of me I can't connect to the shared on my PC (XP SP2). I know it's not a problem with my EXEC because I can connect to my PC at work. I can see my PC in the device list but not connect to it.
The first time I tried to connect using Resco Explorer 05 I managed to ge the screen asking for log-on details, but never got any further as it said my passwork was incorrect. Since then I've never managed to get the log-on screen back only an error say the network resource was unavailable.
I've ran the XP network set-up wizard more times than I can count, changed my PC settings manually but still had no luck. Has no one figured out what we're doing wrong?
I didn't really understand the machine name issue as I don't have any WINS or DNS server at home... But for me it worked...
Anyway you should try to temporarily disable your personnal firewall (On the computer you're trying to access) just to see if it is not blocking network traffic for the windows sharing.
If it is the problem, then you have to configure your firwall to stop blocking this traffic...
Sorry, but it's all I know...
Forrest.
hey.
on my Dopod, how do i enable my other computers to view folders and files on the pocket pc ???
what ip and settings do i need to do ??
i can view files and folders from the dopod but how do i view it from my pc ????
cheers
Do you want network shares, or just file level access?
Personally I'd run an FTP server on your PDA and connect through.
V
Agree....
I run an FTP server on the PPC when I need to access quickly from the desktop. That works great.
how do i do that ???
Google for Freefloat FTP Server, I think it will help. I was searching for the access too, and it helped so good luck.
By the way, its freeware so wont be hard to find.
I wanted to find out if anyone knew of any programs that could be installed on an AT&T 8525 (HTC Hermes) that would allow me to move my cursor, access files, delete files, etc. from my computer over wifi.
Thanks!
https://secure.logmein.com/welcome/get_logmein_free/signup.asp
Mike
I didn't know logmein could be installed on a mobile device. If it can, could you please explain how, please.
Logmein free and pro have a very good win mobile version. (Pro or Pocket pc version only)
just got to the log me in site as per normal try to connect to your pc and itll ask if you want to download and install the cab
works well
Jeremy
i just use plain ol' VNC
google pocketpc vnc viewer, it works well.
run VNC host on your computer, forward the ports you need with your router and learn your IP, or get a dynamic IP routing service and set it up to work with your router..
+its free, and understood by everyone.
I use RealVNC on the desktop (free version, no file transfer) and MochaVNC on my 8525. Worked great!
Stop by DYNDNS.org to get a named dns, works even if your modem shuts down for a while and the old IP goes back into the pool. (It's free too)
Configure the router for RealVNC (port 5900) and also configure the router to use dynDNS (it's easy to do with linksys routers)
Maybe not exactly what you're looking for but I manage those tasks with RESCO EXPLORER - you will see your desktop under NETWORK just like you would use your desktop for MY NETWORK PLACES. It is easy to move, copy or delete (shared) files ...
hi
can anyone tell me how can i send files between 2 pda devices over Wifi?
i already know how to transfer files between a computer and my pda ,because i can enable file sharing on windows pc very easy and it is not a problem.
The real problem is how to enable file sharing on a Folder ON MY PPC DEVICE (WIN 6)?
Thanks in advance
ok
i think my question is so hard on you otherwise at least tell me it is not possible
You can do this via bluetooth.
As for wifi, try wmwifirouter
Not work
this software did not help me in transferring files , it only allow me to share my 3g connectiom
I Think It Seem Impossible
some time ago i found a ftp server for ppc
with that you should be able to host the files on the ftp server and download it from the other ppc with an ftp client
777Phoenix777 said:
some time ago i found a ftp server for ppc
with that you should be able to host the files on the ftp server and download it from the other ppc with an ftp client
Click to expand...
Click to collapse
but this will need internet access which is not always there
i would also like to do this, transfering files over bluetooth is so sloooooow, anyboby know if it is possible?
It's doable and it has been implemented successfully.
1. create a new pc-to-pc (adhoc) connection on two ppcs with the same name and set both the connctions on the two ppcs to this mode.
2. Set the configurations of the wireless network card. IP: 192.168.0.x, subnet mask: 255.255.255.0
Now the two devices can see earch other in all wireless networks. Connect them. What you need next is server programs to provide file sharing/transfering service.
3. Install wmftp on one ppc, and set up account/password/port...
4. Now the second ppc should be able to co share files on the first via ftp service.
Hello,
I'd like to be able to connect from my PC to my PPC using wi-fi, nit USB/ActiveSync. This is part of an effort to establish connection between all networked computers - one PC and two PPC, including the possibility to connect from one PPC to the other. I am not sure how much of this is possible, and will appreciate advice.
Currently I have:
DHCP enabled wi-fi router and assigned static IPs to both PPCs, e.g. 192.168.2.100. I try to access this via FileZilla by typing the IP or the host name (WM_Cheeseus). I never get beyond:
"Connection established, waiting for welcome message...
Error: Could not connect to server".
I can ping the device, but I cannot see it from Windows Explorer's Network Places (only see other PCs, not the PPCs).
From the device, I can ping the PC (192.168.2.102) but I get "request timed out" when trying to ping the second device, 192.168.2.109.
I think I am looking for the WM version of "sharing" my PPC's folders on the network.
So, what settings should I be looking for? Thanks!
don't think ppc support smb server role
you can put a ftp on it and do it that way
Rudegar said:
don't think ppc support smb server role
you can put a ftp on it and do it that way
Click to expand...
Click to collapse
Um... what do you mean by "put a ftp on it"? Will Total Commander's FTP/LAN plugins do or do I need something else? I have tried to connect to the other PPC via TCMD's LAN plugin but I can't.
no total commander got a ftp client not a server
http://www.google.dk/search?source=...le-søgning&meta=lr=&aq=f&oq=pocketpc+ftp+serv
here are some
Thank you!
Mocha FTP did the job - as far as connecting to the PPC from the PC. Unfortunately, it is still not possible to connect between the two PPCs by starting Mocha FTP on one and typing its IP into the other one's browser.