Database Users

PIONEER DEH-P70BT and 02 XDA EXEC

Hi I cant get my Pioneer bluetooth radio to connect to my XDA EXEC I have used my Pioneer radio to connect to other phones fine.
Anyone else got this working?
also can u rename the Bluetooth on the EXEC

I don't have an answer, but can you comment on how the pioneer radio works as a hands-free kit?
Not technically how it works, but how you have found it ie: echo's, caller experience etc.

Works fine the mic that comes with the radio works great, I installed it in the top right hand corner of the drivers side, and even if passanger wants to talk the person hears other end,
Some people have said that there is a bit of a Echo on there end.
Normally it conncect to bluetooth phones easy, juts click on register it finds phone then enter code on phone and done.
I have managed to see the radio from connecting from XDA to the radio, but the radio will still not register it !!. can anyone help.

Don't use the radio's 'register' function. Go to connect and set it going then go to the pda and add a new BT device with the code 1111. Worked for me on my JAMin.
Regards

Can anyone confirm if the Exec is compatiable with this stereo? I've got an Orange M5000 and was thinking of getting this stereo, specifcally for the bluetooth functionality.
I don't think the phone is on their compatibilty list, but I know these lists aren't always kept up to date.
Thank you in advance!

ianlarner said:
Can anyone confirm if the Exec is compatiable with this stereo? I've got an Orange M5000 and was thinking of getting this stereo, specifcally for the bluetooth functionality.
I don't think the phone is on their compatibilty list, but I know these lists aren't always kept up to date.
Thank you in advance!
Click to expand...
Click to collapse
Maybe you should tell us your ROM version so we can see if it has A2DP support.

ROM Version 1.30.90 WWE
Radio Version 1.03.00
Ext Rom 1.30.174 WWE
Thanks

has enyone used Qtek9100 in Audi A6?

Is Qtek 9100 compatible with Audi A6 BT phone connection? Will i be able to use my contacts list or only those from the SIM card? How to transfer contacts to the SIM card?
Thanks

Hi
Don't know if this is any help, but I use MDA Vario (Qtek 2.17.x.x ROM) in Audi A4 and use Bluetooth. Works fine as hands free, but not tried copying contacts accross as I have more contacts than a SIM can hold.
Hope this helps
Mark

Hi
Don't know if this is any help, but I use MDA Vario (Qtek 2.17.x.x ROM) in Audi A4 and use Bluetooth. Works fine as hands free, but not tried copying contacts accross as I have more contacts than a SIM can hold.
Hope this helps
Mark

Sorry but not everybody drives a A6.
Myself I drive a Fiat Grande Punto with Blaupunkt BT radio.
Handsfree calling, phone on dashboard.
Works great.
hope this helps . . . even it's not an Audi

Works only for headset profile, no AD2P support yet.

Problems with BMW Bluetooth car kit

I've just got a Orange SPV M3100 and paired it with my BMW OEM bluetooth carkit, all goes fine and paired no problems.
It manages to connect to the phone and display contact details on the radio display and make calls.
But leaving it a couple of hours and coming back, the phone will not reconnect back to the car. I've tried resetting the phone without success.
The only way to get the connection back is to re-pair the devices.
I had a Imate Jamin before and it worked without a problem, connects every time.
Is anyone else experiencing problems with their carkits?
Do you think the problem is specific to the Orange ROM, would flashing it to a Imate or TyTN ROM help or resolve the problem?
Any advice would be greatly appricated.

Hi, I got a problem similar like yours...
I´m from Spain and I have an ´06 Opel Astra(Vauxhall in UK) with the BT handsfree carkit from factory.
If I make a hard reset to my Vodafone S200 (Orange SPV M600) and leave the machine with the factory settings it works fine with the carkit, but it recognice the carkit like a headset handsfree. But if i restore a back up with the TomTom 6 installed... wow, then start the problems... the handsfree conect with the S200 but after a few seconds the connection is over...
I don´t know if have you got some kind of navigation system, but in my case the problems starts when I install the TomTom... I´m sure it changes some drivers of the BT and this makes the don´t works propertly.
I don´t know what to do...

PArrot Car Kit
I have the same problem with Parrot Car Kit and I have the latest TYTYN ROM

2006 BMW 3-Series Bluetooth
My car doesn't have bluetooth, but I had a loaner car while my car was under the knife. The loaner car was a 2006 3-series w/ Bluetooth. The first pair was perfect, but after a few hours.. What a POS.
I have the latest ROM on my phone, and that didn't make a difference.

No issues on my 5 series, but I have one of the first ULF modules in mine.

From reading TyTN Bluetooth issues around the net and on this forum, it seems to be an issue with the TyTN having some kind of power save mode which turns the bluetooth off after some time.
Kinda stupid, anyone know some registry crack to turn any power saving off?

I have a Parrot CK3100 in a BMW and a brand new SPV M3100. All was working well with my M600 but as soon as I swapped the phone for the M3100 last week I've had problems as described by the OP. Bluetooth keeps switching itself off on the SPV. It works well enough to start with and then suddenly it disconnects. Re-pairing works and it's worth going to bluetooth settings and turning it back on again before you try re-pairing.
Surely there must be an easy fix for this problem - I'm just really pleased I'm not the only one with this fault.

............

Your all quite lucky it works at all..mine doesn't do anything
My Ford Fiesta has been waiting for an 'software upgrade' since October !!
Promised it would be available before Xmas but nothing happened.

lifterus said:
Try and replicate the problem with a different phone if possible. One that BMW supports. If can replicate it, then they'll update the firmware on the BT unit in the car. This happened to me. But I had to prove my case using my girlfriend's RAZR before they'd listen and stop blaming my phone as the cause.
Click to expand...
Click to collapse
I dont think it is a problem with the BMW carkit as it worked fine with my SPV M600 (Prophet)

Tytn & Sap Problem With Mercedes

Hi my friends, I have problems to connect my Tytn with my Mercedes Benz bluetooth UHI interface system.
Have you notice about this bug ? I have installed Jetware test build but the problem is the same.
Thank you for your courtesy

A friend of mine had the same problem, seems you need upgrade to WM6 to fix the connection with your Benz.
Bye

I have WM6 but the problem is the same. Do you know if your friend has operated other operation ?

I have just purchased a TyTN II which won't connect with the Mercedes SAP car kit. It gets as far as finding the device but when the car kit tries to send the pairing code it fails.

Go to http://www.benzworld.org/forums/audio-telematics-forum/ and/or look on the site for your specific vehicle group such as W163 or whatever yours is.

Mercedes - Tytn integration
So it looks like one of the few options is by sending virtural cards to the mercedes thing...
Problem is that you need to do this one by one... any way to automate this? a script or something?
I would be happy already if i could synchronize, copy all my contacts to the mercedes memory every now and then...

Bluooth & Carkit (Mercedes)

Hello all, I have upgraded to Sharps 4.0 but the bluetooth in teh car still does not work. Carkit finds the phone and calls to connect, however there is no answer from the phone to give the code.
Can any body help. This did not work with original WM5 from T-Mobile and still does not work wit WM6
Thanks in advance for the answer to solve this problem

I have a similar problem with my TyTN and Pioneer DEH-P75BT, and i found this post...
http://forum.xda-developers.com/showthread.php?t=290871&highlight=P75BT
With this changes in registry, my TyTN connect with headunit tottaly correct.