SD Card not recognised in file explorer - JAM, MDA Compact, S100 General

Hi all,
I have searched hi and low for the resolution to my problem. I have owned a Magician (sold as Xda II Mini) for just under a year and have a 1Gb SD card (eagletec turbo 66x speed) which has worked beautifully until two days ago
File explorer does not recognise the SD card. I have tried the SD card in other devices (e.g. PC - using a card reader, digital camera, dvd player, my friend's pda etc...) and it works fine.
I have tried inserting different SD cards into the Magician and they all get recognised ok.
I have tried soft reset and hard reset to no avail.
I have formatted the SD card using a card reader on the PC (tried both FAT and FAT32) and also tried formatting it in my digital camera.
When I insert the card into the Magician (from power off state), the Magician does light up indicating to me that there is no problem with the spring load mechanism of the expansion slot. What is strange is that when I go to Settings->System->About, I get 'Expansion Slot: Not in use'
I also tried (after a suggestion in another post) to add a "shim" of plastic of paper on the contact side of the SD card. No use.
I am reluctant to flash the ROM as I have not had any other problems with the Magician to warrant it.
Any ideas?

Have you tried cleaning the contacts of the SD card? Try soft resetting with the SD card in it.

Hi thanks for replying.
Yes I have cleaned the contacts of the SD card and also tried many soft resets with the card in and also with the card out.
????

Hello,
Try formatting your card with a different reader or from a Nikia phone.
Regards
Carty..

I have tried formating the card in several card readers. Still not being recognised is file explorer. Again, the card does work in any other device I put it in - just not my mini
Anyhow, I'll just use a different card for now. Just wondered if any other people had the same issue as I do.
Thanks all.

for me the same **** happened with my new, exchanged, mdac. using the sd card with the previous machine was no problem, now the card is not being recognized at all. using it in notebook, camera ... no problem.
any ideas?

i dont want to start another thread but im having the exact same problem with my MDA Compact II. I have a 1gb Toshiba SD card that wont even work in the MDA but it works fine on my camera and PC. So I would like ot know if there is a solution to this
Thanks

Hi all
I am a newbie and am experiencing the same issue, external sd card not showing up in file explorer.
Sniffer can find it and I can play media files from there. Is this the norm or do I need to change something?
I am using C&C 1.5ghz Froyo Combo VERSION 8 final.
The 16GB card is seen by all other card readers I have tried.

Related

SD memory Card files disapeared

Hi , all something strange happened to my XDA II SD Memory card!!! , i was installing an application on the SD Card and i went to the SD Card to explore it searching for something while the XDA while installing but i couldn't see all my old files , when i check the memory status i can see that i am using 70MB if the 256MB but i can't locate the files.
can any one help.
I had the same problem with a Sandisk 256mb card.
I've found that it works fine with a Lexar 128mb card though.
So it looks like the XDA2 has problems with SD cards as well as a completely duff bluetooth implementation.
Re: SD memory Card files disappeared
raheeeb said:
Hi , all something strange happened to my XDA II SD Memory card!!! , i was installing an application on the SD Card and i went to the SD Card to explore it searching for something while the XDA while installing but i couldn't see all my old files , when i check the memory status i can see that i am using 70MB if the 256MB but i can't locate the files.
can any one help.
Click to expand...
Click to collapse
Man thats bad news, have you tried doing a soft reset.
Also if you have a PC card SD reader try running Scandisk on the
card.
BTW as you can see it not a good idea to access your SD card while
programs/files are being installed / written to it.
HTH
Sandisk
ok interesting , i am also using Sandisk 256MB!!!
i tried soft reset and it didn't help.i will try to find a PC reader and see if i can get anything out of it or i might try to use it on my brother XDA 1 because most of the files were used on my old XDA with PPC2002 rom.
Hurray, its not just me then. I have a 128mb dane elec card and 70meg has disapeared. Im not sure if anything was on teh card previously and I dont have a card reader to check. Its most annoying!
Storage Card slot kaput
I bought a brand new generic 2GB SD card and had it working for a day. It just wasn't working anymore one morning I have left my XDA II overnight on the cradle. Now it wont accept any MMC or SD card I put on it. Any idea what could have gone wrong?
When it was still working I tried copying media files on it (in Microsoft knowledgebase they confirmed in order for media files to work in storage cards you have to create My Documents folder did this on the several cards I tested but to no avail)
The storage card I bought was 2 GB, O2 site says XDA II has been tested on 1GB storage cards--could I have burnt my SD card slot?
Maybe the card brand was too generic-- but then I tried other branded SD and MMC cards after the day my slot stopped recognizing and it still didn't recognize Sandisk (512) and Leica cards (64MB)
The SD card in question is still detected if you put it in a card reader then connect it to a PC
Help badly needed, I'm losing so much productivity with very small storage/ROM space
Hanshake said:
The storage card I bought was 2 GB, O2 site says XDA II has been tested on 1GB storage cards--could I have burnt my SD card slot?
Click to expand...
Click to collapse
Well, I'm using Kingston 2GB SD card and it works perfect... and it's a high speed card.
You may have your SD slot broken. My slot for example from time to time gets the card disconnected (let's say, every few hours), and I have to pull it off and put back in.
in a sdcard reader undelete tools from pc can recover files from sd cards as they can with harddisk
like undelte plus

sandisk sd card 2gb and qtek s100

I just bought a 2gb sandisk sd card
it is recognised by the magician but each time it switchs to stand by mode the "memory card" file disappears...So I have to take it out and to insert it again (two times) in order to see it again.
Is it normal ? or there's a problem with this card ?
thanks
:shock:
up
Good to read, Storage to the people!
Take a look @ the card params too. Somehow a magician communicates better with a fat(16) card than fat32.
Have fun, M
thanks for your comment...
I can only format the sd card with the magician because i don't have a sd card reader for my PC. But with the program I use (FORMAT) I cannot choose FAT 16 or 32 - do you know a soft to do this ?
PHM Pocket Mechanic is very good for this, available on trial
I just received my Sandisk Ultra II 2GB card and it's working fine with my S100 (1.12) and I didn't have to format it when I received it.
However I have just come upon a problem. The card works fine in my S100 and I can copy files to it via ActiveSync. In order to speed things up I just tried putting it in the card reader in my laptop which reported it as unformatted...
Got the Sandisk Ultra 2 2GB for my M500 and it works fine in the phone , my card reader however does not like it either.
However i have sd-cf adapter that i use with my camera , i sloted the sd card in to that and in to the card reader and it works fine at very high speed.
Hope that helps.
C.
Laptop doesn't have CF and I'm reluctant to allow it to format the card in case I suddenly have issues reading it in my S100. :/
hi, i ran a benchmark in my 512mb SD card (unknown brand - missing logo) with pocket mechanic and the results are: Read 5.1X and Write 0.6X. Is it bad?
ok my card reader on my laptop and my S100 must talk a different dialect of SD card because no matter what I do they can't work together.
If I format the card in my S100 and copy files via activesync the laptop reports the card as unformatted.
If I format the card in my laptop and copy files on my pocketpc can't see them.
Size doesn't fit to 2GB Card
Hi I just got my sandisk ultra II 2GB SD Card and at first it worked fine.
Magician recognized it as 2GB then i copied some files from my computer with my SD Card Reader. But after inserting the card into my magician i got some weird looking characters, files, and folders. So I inserted it again in my SD card reader and formatted the card. After that my pc and my magician doesn't recognise the card as 2GB anymore just 1GB .
Any help to solve this problem and to get my 2GB back ?
I too facing the same problem it is detecting as 1 GB instead of 2 GB also the after formatting sd card in card reader made i unformated for ppc and viceversa dam,anybody have a solution for this ?

Memory card problem

After using my vario 2 for a while the mem card becomes unusable.
It's shows no free space at all. I have a 1 gb memory that came with my t-mob vario 2.
My mp3 ring tone doesn't work anymore. I have to remove and reinsert the memory card or soft reset the device.
Radio 1.20.31.10
Rom: 1.21.114.3
Any idea's what could be the problem?
Thanks
The smilar problem occured with one of my XDA-II (Himaliya), Even though I have hard reseted the device. Finnaly I have backuped the card through the pc and format the card (on PC) and it wasn't working, even though I have tried 3 other cards and they were working absolutely fine with the device. What I did was to leave the card inside the device for overnight and it was recognisable in the morning, then I took out the card from the device to put the data back from the PC and once I have put the card back in the device the card wasn't recognisable again, So finaly I left the card again in the device overnight and it was recognisable again, then I left the card in the device and put the data back through the syncronisation.
I haven't taken out the card since then because I know there is some recognising problem between the device & the card, its working since then.
My Advice is : To check another card and if that would work then try to sell your current card and buy another.
My advice 02: Try to backup your device, leave the card inside the device and HARD Reset the device & once the device will install newly it should configure the card as well.
I have got very usefull software "storagetools" (trial) by which you can scan, format & defrag the card, you can try it.
GoodLuck
Sidd
Use chkdsk on the PC to check your storage card (instead of any PPC-based software, including Storage Tools). I also recommend the thread at http://www.pocketpcthoughts.com/forums/viewtopic.php?t=39583 on all these q's.
On a related issue concerning problems with microSD cards and the TyTn, I have a problem which I hope you can help me with:
I have a new TyTn (ROM Ver. 1.18.255.3) with a 512mb miniSD card. In the course of my usual usage, the device hanged and after a few minutes of unresponsiveness, I reset the device using the reset button. When it rebooted, the card is no longer recognized by the phone. I used a card reader and WinXP and Mac OSX cannot also recognize it. If I try to format it (XP), XP says that the card cannot be formatted. I tried using it in my Samsung D820 and it cannot also be formatted. I then concluded that the card was defective and bought a new one (512mb).
After using the new card for a week, my TyTn hanged while accessing a program installed in the card. Again after a few minutes of unresponsiveness, I rebooted the phone using the reboot button. When the device booted-- Bam!!! the card can no longer be recognized by my phone! Windows and Mac OSX cannot mount it. I tried the unrecognized card in my Samsung D820 and it is recognized! I inserted the miniSD card (128mb) originally in my D820 in my TyTn and it is recognized/read by the TyTn. I formatted the defective card in the D820 and copied a few files in it and the D820 can read those files but my TyTn can't! I tried the other 128mb card on my TyTn, formatted it and copied files into it and everything's fine.
How come then that the 512mb card can be read by my Samsung phone and not by the TyTn? My TyTn is certainly not defective because It can access the 128mb card that was originally in my D820. As I stated earlier, I have already formatted the 512mb card in my Samsung phone and have transferred files into it (The Samsung phone can read the files written on it).
I have re-inserted the 512mb card numerous times in my TyTn to no avail. I have also rebooted my TyTn several times and still it cannot recognize/read the 512mb card. I am now using the 128mb card that I originally use in my Samsung D820.
If it can help, I have enabled and unlocked my TyTn's extended ROM. I have a few programs that are installed in my Ext ROM.
Thanks!
Similar card problem
I recently purchased the T Mobile MDA Vario2 with the CoPilot 6 software. worked fine for about a week and then the CoPilot software which was running from the memory card started to hang intermittently. The first couple of times a soft reset cured it. Then after about the third soft reset, the memory card was no longer recognised. Tried reading the card via my pc and that couldn't recognise it either.
Took both the phone and card back to T Mobile where a new card was tried, this was recognised immediately so I now have to take the whole CoPilot package back to be replaced.
I have also just orderd a new 1GB sandisk card from Amazon and am now concerned that this is going to be a repeating issue. I wonder how many other owners have had this problem and if it is actually a fault with the Vario2 or wether I have just been unlucky with a dodgy memory card.
Would appreciate other thoughts on this.
Cheers
Matt
I think that enabling the "Advance network functionality" causes the corruption of memory cards.
amf said:
I think that enabling the "Advance network functionality" causes the corruption of memory cards.
Click to expand...
Click to collapse
How did you work that one out?
Elwyn M3100 said:
How did you work that one out?
Click to expand...
Click to collapse
Because when I enabled it, the corruption started.
amf said:
Because when I enabled it, the corruption started.
Click to expand...
Click to collapse
Hmm, yes, I can see where you worked that one out

Help SD card Problem

Hello! Although this is my first post on the forums, I have been reading extensively through these forums for the past ferw weeks since my acquisition of my new to me MDA (i.e wizard G3). Yesterday, I took out the sd card for a few hours and now when I put the card back in the wizard is not recognizing the sd card in the file explorer. I put the card in the PC and it is recognized fine there. I reformatted the sd card via FAT and inserted it back into the wizard but no luck. I soft reset the phone several times but in vain. I then eventually hard reset the wizard and THEN inserted the sd card but still not read. I tried going through the My computer--> Manage --> Disk Management but the sd card is not showing up on it.
The sd card is clicking in and out fine from the wizard. Any help would be greatly appreciated. All my medical programs were on the SD card. And with that many programs I cant just work off of the memory.
Thanks in advance
Sohaib
update
I installed the wm5storage and the program does not recognize the sd card either
Update
-Tried formatting to FAT with computer and re inserting did not work
-Tried Formatting with WM5storage and THAT didnt work either
-CID unlocked the phone, installed 3.08 ROM, and then "Crossbow reloaded" with 2,19 UK Radio Rom, tried inserting the sd card and still not work
-Tried formatting with "Flash Format" and the program says "no storage card detected"
I am thinking that I may have damaged the pins or something when I was reinserting the SD card, initially when I noticed the problem
2 options in front of me now!
1. buy another mini SD card and see if that works
2. Open up the Wizard to see if it is a hardware issue
Opinions etc would be greatly appreciated
thanks
sohaib
Ive got the same problem with my Qtek 9100
hi i had a near identical problem occur with my xda mini, as in after removing and reinserting my sd card it was not being recognized. i happened to have a old mini sd card (only 64mb tho!) and that was recognized. so i just bought another 2gb sd and its been fine ever since, but saying that i have not removed it from my mini yet! which is getting a little annoying now as i was given a copilot kit and the software is on a mini sd card
Try removing all formatting and then allow the phone to format your card. I had a problem with my second MiniSD card after formatting on my PC.
Insert your card into your card reader. Right click "My Computer" and click on "Manage". Then left click "Disk Management", find your card and delete the partition. At this point, you can then stick the card into the phone and it will ask if you would like to format the card. Even though the computer will not recognize the card, your phone will.
Snapin Disabled
I tried the approach of right click my computer--> manage --> disk management --> but it tells me that the snappin is disabled and when I go into start--> run--> gpedit.msc --> to enable the disk management it still does not recognize my storage card in the disk management. Hence I am unable to remove the partition.
Thanks for the replies guys, any suggestions on how to enable the specific snapin on XP?
Thanks
Sohaib
New Mini SD Card
OK, so in attempts to diagnose the problem, I went out today and purchased another 1gb minisd card, inserted it into the wizard and................NOTHING. Still no luck. Does this narrow down to the problem to a hardware pin related issue? Or could this still be a software problem. I figured that a new sd card may resolve the issue but unfortunately not, any suggestions would be greatly appreciated.
Thanks
Sohaib
Bump
Ideas? Suggestions? Recommendations?
Thanks in advance
Sohaib
If you tried another card and a new ROM, I would say it is a hardware issue, if it's still under warrantee then I would send it in. If it's not and you want to try to fix it yourself, there is the HTC wizard maintenance manual (Google search) that will give you step by step instructions on how to disassemble it. Or sell it on eBay then use the money to buy a new one.

Hermes 8525 not detecting storage card

I have a 2gb storage card that use to work before I bricked my phone. So, I sent it to Cingular for them to fix it and they did. But now I am trying to install back the files I had on my 2gb storage card and its not showing up on the phone. Any help is much appreciated. Thank you.
i would try another sdcard
try the sdcard in a sdcardreader
if both resulted in failure i would say that
they by fixing 1 thing broke another
I think they replaced the motherboard. I dont know if they gave me a defective one.
i am having the same problem...Ive had my storage card for quite a while now and had 1g of memory used up and now all of a sudden none of my music or photos that are on the card are being shown. It still detects my storage card and that the space is used but i cant find the files anywhere.
Ozrednsx said:
i am having the same problem...Ive had my storage card for quite a while now and had 1g of memory used up and now all of a sudden none of my music or photos that are on the card are being shown. It still detects my storage card and that the space is used but i cant find the files anywhere.
Click to expand...
Click to collapse
Removing and re-inserting the card as well as performing a soft reset can make vanished files re-appear. However it depends whether there is corruption on the card.
Does the card work using a card reader on the PC?
If it does and you have tried the above, then I would copy everything from the card to the PC, reformat the card and then put everything back again. If the PC does not see all the files either then you may, if it's worth it, try some software to recover files from the corrupted card. (This os often not 100% successful, but worth a try of there is something vital on there).
Mike
I have 3 8525's that are not detecting the 2G memory card when it is inserted. I have to perform a soft-reset in order for the device to recognize it. I now the cards are good because they work in my Axim.
I have 4 2G memory cards doing this which are Kingston & Sandisk. Two of the SanDisk cards are brand new.
Are there any known issues?
I have this problem as well. I'm not sure what the source is.
I cannot even get it to work with a soft reset though.
The card I have is a 1Gb Kingston, and it definitely works because I tested it on my computer.
I guess I'll Just call Cingular when I have a bigger problem at hand.
2gb sandisk card on 8525
I used to have this proem on a brand new card. I would put it in and nothing would happen. But insert in my PC, and it works. What I did was format it to fat32 (from the factory installed FAT) put it in the 8525 and it showed up. Just to test again, tried formatting back to FAT and didn't work again. back to FAT32 and no more probs. Hope it helps for you guys.

Categories

Resources