Database Users

SD memory Card files disapeared

Hi , all something strange happened to my XDA II SD Memory card!!! , i was installing an application on the SD Card and i went to the SD Card to explore it searching for something while the XDA while installing but i couldn't see all my old files , when i check the memory status i can see that i am using 70MB if the 256MB but i can't locate the files.
can any one help.

I had the same problem with a Sandisk 256mb card.
I've found that it works fine with a Lexar 128mb card though.
So it looks like the XDA2 has problems with SD cards as well as a completely duff bluetooth implementation.

Re: SD memory Card files disappeared
raheeeb said:
Hi , all something strange happened to my XDA II SD Memory card!!! , i was installing an application on the SD Card and i went to the SD Card to explore it searching for something while the XDA while installing but i couldn't see all my old files , when i check the memory status i can see that i am using 70MB if the 256MB but i can't locate the files.
can any one help.
Click to expand...
Click to collapse
Man thats bad news, have you tried doing a soft reset.
Also if you have a PC card SD reader try running Scandisk on the
card.
BTW as you can see it not a good idea to access your SD card while
programs/files are being installed / written to it.
HTH

Sandisk
ok interesting , i am also using Sandisk 256MB!!!
i tried soft reset and it didn't help.i will try to find a PC reader and see if i can get anything out of it or i might try to use it on my brother XDA 1 because most of the files were used on my old XDA with PPC2002 rom.

Hurray, its not just me then. I have a 128mb dane elec card and 70meg has disapeared. Im not sure if anything was on teh card previously and I dont have a card reader to check. Its most annoying!

Storage Card slot kaput
I bought a brand new generic 2GB SD card and had it working for a day. It just wasn't working anymore one morning I have left my XDA II overnight on the cradle. Now it wont accept any MMC or SD card I put on it. Any idea what could have gone wrong?
When it was still working I tried copying media files on it (in Microsoft knowledgebase they confirmed in order for media files to work in storage cards you have to create My Documents folder did this on the several cards I tested but to no avail)
The storage card I bought was 2 GB, O2 site says XDA II has been tested on 1GB storage cards--could I have burnt my SD card slot?
Maybe the card brand was too generic-- but then I tried other branded SD and MMC cards after the day my slot stopped recognizing and it still didn't recognize Sandisk (512) and Leica cards (64MB)
The SD card in question is still detected if you put it in a card reader then connect it to a PC
Help badly needed, I'm losing so much productivity with very small storage/ROM space

Hanshake said:
The storage card I bought was 2 GB, O2 site says XDA II has been tested on 1GB storage cards--could I have burnt my SD card slot?
Click to expand...
Click to collapse
Well, I'm using Kingston 2GB SD card and it works perfect... and it's a high speed card.
You may have your SD slot broken. My slot for example from time to time gets the card disconnected (let's say, every few hours), and I have to pull it off and put back in.

in a sdcard reader undelete tools from pc can recover files from sd cards as they can with harddisk
like undelte plus

2GB card not getting recognized by Magician

My O2 mini is currently working ok with a 1GB SD card. However when I try to use a 2GB SD card, it always pops up the message "Do you want to try to format this storage card to make it readable? This will permanently delete any files on the card. Yes. No."
After I go ahead and format it, it says "This storage card has been successfully formatted". But the card does not show up in File Explorer. Also on removal and re-insertion of the card it shows the Formatting message all over again and again. This card is a "MyFlash Turbo" Card purchased from Singapore and it works perfectly fine in my USB card reader. I've tried copying files onto the card using the card reader. When I load this card in my O2 mini it again pops up the formatting option. When I format it in the O2 and try to read it through the card reader, the windows OS now tells me that this card is not formatted.
I don't know what to make of this. Can any one give me a solution to make the card recognized by my O2 mini?
Best Regards

same problem here bought my card in singapore too... some people have reported it to work. Would appreciate if someone could figure it out.

Maybe it's a specific brand that does not work?

Jainoxi said:
Maybe it's a specific brand that does not work?
Click to expand...
Click to collapse
Well that's what I thought, but this card seems to work ok through the card reader so I can't figure out if it's card or the xda mini which is at fault ??? Meanwhile my xda mini accepts my other cards. Any one has any clues as to what might be the problem ?

samiranm said:
My O2 mini is currently working ok with a 1GB SD card. However when I try to use a 2GB SD card, it always pops up the message "Do you want to try to format this storage card to make it readable? This will permanently delete any files on the card. Yes. No."
After I go ahead and format it, it says "This storage card has been successfully formatted". But the card does not show up in File Explorer. Also on removal and re-insertion of the card it shows the Formatting message all over again and again. This card is a "MyFlash Turbo" Card purchased from Singapore and it works perfectly fine in my USB card reader. I've tried copying files onto the card using the card reader. When I load this card in my O2 mini it again pops up the formatting option. When I format it in the O2 and try to read it through the card reader, the windows OS now tells me that this card is not formatted.
I don't know what to make of this. Can any one give me a solution to make the card recognized by my O2 mini?
Best Regards
Click to expand...
Click to collapse
that's mean the SD card is not compatible with magician. I also got the same problem with only 256mb SD card. it's probably running on a not compatible frequency with magician.

My SanDisk Ultra II 2gig card from MobyMemory works perfectly

frendrick said:
that's mean the SD card is not compatible with magician. I also got the same problem with only 256mb SD card. it's probably running on a not compatible frequency with magician.
Click to expand...
Click to collapse
Running a different frequency? I thought there was a SD compatible format, and that all SD card are made accordingly...

I had the same thing with my Sandisk Ultra 2GB. What I did was pair the device with my laptop and explor to the SD card via the explorer in Activesync. I then created a folder called Temp. After I did this, the file explorer and magician would see the card with no problems.
Hope it help
-M

I have exactly the same problem with the MyFlash (AData) 2GB as well on my O2 Mini.
Swap 3 cards already (different batches) and all had the same problem.
I've experience problem copying files to it from my laptop as well. I used a USB2.0 SD reader/writer and copied a large 900MB file to it - got the following error after a while:
Windows Delayed write error. Path is too deep
My Explorer hangs from that point. Same thing happened for all 3 cards.
I'm staying away from this AData 2GB for now.
cheers,
Patrick

Fresh Freddie:
What the price Sandisk II Ultra 2 Giga ?

sd card problems
Price: £131.99 (£131.99 Inc. VAT)

Thanks Bushmen.
Their own brand for £99.99 incl.VAT !
http://www.mobymemory.com/HiSpeed_SD_Memory_Cards.asp

Caution : further to my last post :
http://forum.xda-developers.com/viewtopic.php?t=25289&highlight=

Adata 2gb 150x does not work with my MDA Compact (format message ect... card works with laptop via card reader...). Very crossed.
Any comment welcome... or should I just get a 1gb card?
Has anyone successfully used Adata 150x 1gb sd with their MDA Compact?
Thanks.

plt,
have you tried the trick that Mashie mentioned?
Mashie said:
I had the same thing with my Sandisk Ultra 2GB. What I did was pair the device with my laptop and explor to the SD card via the explorer in Activesync. I then created a folder called Temp. After I did this, the file explorer and magician would see the card with no problems.
Hope it help
-M
Click to expand...
Click to collapse

Adata 2gb 150x does not work with my MDA Compact (format message ect... card works with laptop via card reader...). Very crossed.
Click to expand...
Click to collapse
I've had the same problem with this card on my JAM- simply does not recognise it at all (therefore cannot even try Mashie's method).
Tried it on my mate's XDA ii and it works straight away (ended up selling to him). What is it with these not supporting particular 2GB cards.
I think as a rule of thumb, those 2GB card which are 60x speed should work:
Sandisk - probably not the Extreme III
ATP 2GB
PNY 2GB
All of these are far more expensive than the Adata and others from the far east.

plt said:
Adata 2gb 150x does not work with my MDA Compact (format message ect... card works with laptop via card reader...). Very crossed.
Any comment welcome... or should I just get a 1gb card?
Has anyone successfully used Adata 150x 1gb sd with their MDA Compact?
Thanks.
Click to expand...
Click to collapse
ADATA My Flash 1GB card doesn't work as well.

Have you tryed to format the card with your SD-Reader card? or best install Pocket Mechanic and try format with some other FAT options.
Good luck!

I bought an ADATA myflash MMCplus turbo 2GB 200x from us and it worked out of the box on my magician .109€.

I bought an ADATA myflash MMCplus turbo 2GB 200x from us and it worked out of the box on my magician .109€.
Click to expand...
Click to collapse
The only obvious differences between this one the other ADATA one is that this one is MMC and a faster speed.
Still strange that it does work (or why this one works and not the others).
I have ordered yet another 2GB SD; will post to let you guys know if it works or not.

sandisk sd card 2gb and qtek s100

I just bought a 2gb sandisk sd card
it is recognised by the magician but each time it switchs to stand by mode the "memory card" file disappears...So I have to take it out and to insert it again (two times) in order to see it again.
Is it normal ? or there's a problem with this card ?
thanks
:shock:

up

Good to read, Storage to the people!
Take a look @ the card params too. Somehow a magician communicates better with a fat(16) card than fat32.
Have fun, M

thanks for your comment...
I can only format the sd card with the magician because i don't have a sd card reader for my PC. But with the program I use (FORMAT) I cannot choose FAT 16 or 32 - do you know a soft to do this ?

PHM Pocket Mechanic is very good for this, available on trial

I just received my Sandisk Ultra II 2GB card and it's working fine with my S100 (1.12) and I didn't have to format it when I received it.

However I have just come upon a problem. The card works fine in my S100 and I can copy files to it via ActiveSync. In order to speed things up I just tried putting it in the card reader in my laptop which reported it as unformatted...

Got the Sandisk Ultra 2 2GB for my M500 and it works fine in the phone , my card reader however does not like it either.
However i have sd-cf adapter that i use with my camera , i sloted the sd card in to that and in to the card reader and it works fine at very high speed.
Hope that helps.
C.

Laptop doesn't have CF and I'm reluctant to allow it to format the card in case I suddenly have issues reading it in my S100. :/

hi, i ran a benchmark in my 512mb SD card (unknown brand - missing logo) with pocket mechanic and the results are: Read 5.1X and Write 0.6X. Is it bad?

ok my card reader on my laptop and my S100 must talk a different dialect of SD card because no matter what I do they can't work together.
If I format the card in my S100 and copy files via activesync the laptop reports the card as unformatted.
If I format the card in my laptop and copy files on my pocketpc can't see them.

Size doesn't fit to 2GB Card
Hi I just got my sandisk ultra II 2GB SD Card and at first it worked fine.
Magician recognized it as 2GB then i copied some files from my computer with my SD Card Reader. But after inserting the card into my magician i got some weird looking characters, files, and folders. So I inserted it again in my SD card reader and formatted the card. After that my pc and my magician doesn't recognise the card as 2GB anymore just 1GB .
Any help to solve this problem and to get my 2GB back ?

I too facing the same problem it is detecting as 1 GB instead of 2 GB also the after formatting sd card in card reader made i unformated for ppc and viceversa dam,anybody have a solution for this ?

Wiazard doesnt read my newb 2GB Transcend MicroSD Card :(

hi
i just bought a new 2GB Transcend MicroSD Card
with mini sd adapter.
but the wizard doesnt read the card
(fat32 formated)
if i try the card in a cardreader its working ,
my old 512mb mini sd card working is working in my wizard..
any solution?

XTRANGE...
Try to use a ROM that contains the app format storage and try to formatt... but i think it may recognize it first... nothing to lose if try... or reformatt it on a XP built in with card reader.

Panasonic makes a free sd formatting software that it claims to strictly adhere to the sd standard:
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
You could give it a shot, don't see how it could hurt

Format microSD card

Hi,
i have a new sandisk 2GB microSD card in my hermes. Because i have no card reader for my pc i want to format the card in my hermes.
Is it possible to do so? I cant found any option for formating.
The hermes says in settings >> memory that no card is installed.
I thing it is because the card is unformated.

I do so, but there is no storage card.
The mobile device also says that there is no storage card.

I know that Resco File explorer can format the card but most cards are formatted fat by default. The Hermes at least recognises this. If you're not even getting the sd card recognised then there may be either a problem with the card or with the Hermes.
It would be best to just fork over a few bucks and get a card reader for the pc as if the pc is recognising the sd card that means that the Hermes may have a problem. Try formatting FAT32 anywaty then put back into Hermes. May work.
If the pc doesn't recognise the sd card, does happen that new cards go bang, then I'd suggest taking the card back and getting a new one.
Cheers...

8gB micro SD
Hello,
I have the same problem. My 1gB card works fine in my Hermes but the new 8gB is not recognized. Spec says phone can only take maximum of 2gB but other forums say can use 32gB. My latest clue is that the card was preformatted with FAT32 and the Hermes requires FAT. However FAT can only deal with Volumes up to 4gB. So I stumped.

If you read a bit further you'd realise that these people with 32 Gb cards run custom roms which have the patch applied...
There is a cab file running around that allows you to run sdhc cards on WM 5/6 but I can't remember what its called (try sdhc patch in search)...