Hello to all.
First:
I will NOT be held responsible for any problems caused by this tool.
I'm releasing the 0.1 version of the Wizard Unlocker. It's similar to the imei-check.co.uk unlocker (it patches the same bit), however it doesn't cost you £20 per bit :wink: .
Version 0.2: New CID unlocking abitity
Credits for the 0.2 version go to SPV-Developers, namely: itsme, Arc and Arisme...
Version 0.2a: CID unlocking abitity FIXED
Credits for the 0.2a version go to Chan, who took care of the errors I managed to punch in the script when I packed it the first time... Thanks!
Version 0.2b: SIMlock abitity FIXED
Credits for the 0.2b version go to kpcomp, who found the missing GOTO End instruction after a SIMlock... Thanks!
Version 0.3: SIMLock ability redone for all SPLs
Credits go to Buzz_lightyear (Go buzz) for pointing out the obvious.
Now version 0.3a: Minor update, corrected Rapi unlocking
Credits go to everyone that reported problems in the forum
I can't stress enough that this work is heavily base upon the itsme tools, so my thanks to him. Also, spv-developers and xda-developers boards were an invaluable resource.
I would also like to thank all the people that supplied their phone info in this thread: http://forum.xda-developers.com/viewtopic.php?t=33479
Ok, now the instructions...
1 - Unzip lokiwiz.zip to somewhere in your computer
2 - Guarantee that your phone is connected via ActiveSync with the computer
3 - Execute lokiwizMSL.bat (on your computer! My inbox is filled with this kind of error)
4 - It will give you the SIM unlock code after it runs, just get a different SIM from the one your phone is locked to and insert the code...
5 - Have fun...
Frequently Asked Questions:
Q - Will it hard-reset my device?
A - No. It will do a soft reset at the end of the process for applying the changes
Q - I locked my device and now it shows only the SIMlock window
A - Get your phone showing the SIMlock window. Connect it via ActiveSync. Use the tool to get your unlock code
Q - How about the CID unlock tool? (for using any type of roms)
A - Doesn't work yet... Stay tuned
Q - I'm having problems with Unlocker not connecting to the phone
A - Disable all kinds of Antivirus, Firewalls and similar applications before running Lokiwiz.
Bye to all,
Ricardo Afonso
afonso (dot) ricardo (at) gmail (dot) com
PS: If you like it... send me a mail... :wink:
It doesn't look like this has worked on my Prophet. (Orange UK M600 with latest Dopod ROM).
It looks like the auto install of "EnableRapi.cab" did not work.
I ran "LokiwizMsl.bat" 3 times, with no SIM, with the Orange SIM (it is SIM locked to Orange) and with a VirginMobile SIM. Also closing ActiveSync each time on the PC. Re-started the PC after the second try as well!
I think on the second try of running "LokiwizMsl.bat" the phone asked if I wanted to install "EnableRapi.cab" I selected "Yes" but it still went the same as the other times.
This is what was displayed on the PC -
********************************************************
C:\Lokiwiz03>lokiwizmsl
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
Copying C:\Lokiwiz03\Utils\itsutils.dll to WCE:\windows\itsutils.dll
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
opening: lock_backup.bin: No such file or directory
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
********************************************************
I installed the "EnableRapi.cab" manually and deleted all the first part of the "LokiwizMsl.bat" file so the file contained just -
*******************************************************
ECHO RAPI Unlocked.
ECHO Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT
ENDS
ECHO
Utils\pdocread.exe -n 1 0x000000 0x10000 -b 0x4000 lock_backup.bin
ECHO
ECHO
ECHO SIMLock Code is your code... Type it with another SIM in...
ECHO --------------------
Utils\lokiwizMsl.exe lock_backup.bin
ECHO --------------------
ECHO "Standing on the shoulder of giants"
ECHO Ricardo Afonso, 2005
SET Choice=
SET /P Choice=Press Any key to Exit.
********************************************************
Running the above cut down version of "LokiwizMsl.bat" the PC displayed -
********************************************************
C:\Lokiwiz03>lokiwizmsl
C:\Lokiwiz03>ECHO RAPI Unlocked.
RAPI Unlocked.
C:\Lokiwiz03>ECHO Starting MSL work... DO NOT DISCONNECT UNTIL
THIS SCRIPT ENDS
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
C:\Lokiwiz03>ECHO
ECHO is on.
C:\Lokiwiz03>Utils\pdocread.exe -n 1 0x000000 0x10000 -b 0x4000
lock_backup.bin
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
C:\Lokiwiz03>ECHO
ECHO is on.
C:\Lokiwiz03>ECHO
ECHO is on.
C:\Lokiwiz03>ECHO SIMLock Code is your code... Type it with another
SIM in...
SIMLock Code is your code... Type it with another SIM in...
C:\Lokiwiz03>ECHO ----------------------------------------
C:\Lokiwiz03>Utils\lokiwizMsl.exe lock_backup.bin
Lock Status: 0500000000000000
SIMLock Code: 4810**** (was 8 numbers)
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
C:\Lokiwiz03>ECHO ----------------------------------------
C:\Lokiwiz03>ECHO "Standing on the shoulder of giants"
"Standing on the shoulder of giants"
C:\Lokiwiz03>ECHO Ricardo Afonso, 2005
Ricardo Afonso, 2005
C:\Lokiwiz03>SET Choice=
C:\Lokiwiz03>SET /P Choice=Press Any key to Exit.
Press Any key to Exit.
C:\Lokiwiz03>
********************************************************
With the VirginMobile SIM, it was saying something like You have had 1 incorrect try wait to enter SIM unlock code.
When the screen changed to allow me to enter the code, I entered the 8 number code from the PC screen. Checked the number on the phone against the number on the PC about 10 times then pressed "Unlock" on the phone.
It now says
"Service Provider is locked
Please input unlock code."
I'm not sure if I should enter the same number again or if that would be my last of 3 chances to enter the unlock code...
I'm not sure if this is asking for the number that Lokiwiz03 has provided as it now doesn't say anything about having had 2 previous tries! (Which I have - I once entered a code that was on the screen when Lokiwiz02 failed with the ITWrite Disk Error).
What should I do?
Alan
Just want to clarify that I did wait for ActiveSync to connect each time before running the batch file on the PC!
After seeing robincop's post on another thread about Lokiwiz03 I tried runing the full origonal Lokiwiz03 version of the "LokiwizMsl.bat" on the PC after having previously manually installed "EnableRapi.cab" on the Prophet. (Orange UK M600).
It ran without any errors and gave THE SAME 8 digit SIM unlock code as before.
I had run this without re-starting the phone so it was still asking for the Service Provider Unlock Code for the second time. I had previously entered THE SAME CODE when it asked for it at power-up with the VirginMobile SIM in it.
This time it WORKED
Many thanks and MUCH RESPECT to MACHINAGOD.
I'm now using a dual SIM with Virgin(T-Mobile) and Tesco(O2) SIMs in it.
Anyone know how to get a Prophet to display on the Today screen which network it is on?
WiVit SIM Status Switcher is what you need.
But unfortunately it doesn't work "out-of-the-box" with WM5.
You should search this forum, there are some threads with solutions to get this program work on WM5 (until the developer releases a WM5 version).
I runned Lokiwiz03 the way it is described in robincop's post and it worked (thanx machinagod and robincop!). I just wat to clarify those who are confused about entering the codes. So this is the way to do it:
1 - After running Lokiwiz03 (see robincop's post) turn off the phone and turn it on again.
2 - when it asks your pin code enter your normal pin.
3 - it then asks you for the Service Provider Unlock Code: It is here that you insert the sim unlock code obtained with lokiwiz.
Hope this can be helpful!
I ran this on my MDA..seemed fine on the computer screen, everything came back & it gave me a code..however I've soft-rebooted my MDA about 5x now and don't see a screen to enter the code. It goes from the password/PIN screen right to the today screen. I searched around on the phone for a utility to enter the code into but so far no luck. Do I have to put in another provider's SIM card before I can get the 'unlock prompt'?
benenglish said:
I ran this on my MDA..seemed fine on the computer screen, everything came back & it gave me a code..however I've soft-rebooted my MDA about 5x now and don't see a screen to enter the code. It goes from the password/PIN screen right to the today screen. I searched around on the phone for a utility to enter the code into but so far no luck. Do I have to put in another provider's SIM card before I can get the 'unlock prompt'?
Click to expand...
Click to collapse
Ya the phone does not know that anything needs to be done till you put a 2nd sim card in. Then it sees that it is locked and will give you the screen to enter the code.
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0000000000000000
SIMLock Code: ∩X à`e\!±Φ"‼-ÄC
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
HELP!!?! What did I do wrong? I tried installing the CAB Files manually, but it did not help
That means your mobile phone is sim unlocked and doesn't need to be unlocked...
Bye
LOL. You are right. But I never unlocked it. It's brand new....
I thought o2 locked their XDA Mini S?
Anyway, should we expect to see CID Unlocking for SPL 2.xxx?
Thanks
I have a solution for the CID unlocking... But I've toasted 2 devices with it already... So I'm not releasing it.
Another thing is that CID unlocking isn't really necessary. The only case it really is important is the SPL changing, and most of the cooked ROM's don't need a new SPL.
Bye,
Ricardo
but ROMUpdateUtility_noid(Ver:2.5.2) don't support the Prophet ROM that cooked by typho5.exe(Ver:1.0.0.0) and nb2nbf_tornado(Ver:2.2.0.0)
machinagod said:
I have a solution for the CID unlocking... But I've toasted 2 devices with it already... So I'm not releasing it.
Another thing is that CID unlocking isn't really necessary. The only case it really is important is the SPL changing, and most of the cooked ROM's don't need a new SPL.
Bye,
Ricardo
Click to expand...
Click to collapse
Thanks for your work, but CID unlocking is important for the prophet users because we are only able to upgrade, not downgrade. So if someone installs the latest version of Dopod ROM and wants to go back to an iMate ROM, it is not possible.
Thanks for your efforts
Two things:
I've said it 2 times already, this is the last.
The only part of the ROM upgrade that is protected against downgrade is the SPL and the IPL. The rest is unprotected. A specially cooked rom should do it...
2nd:
The ROM updater I attach to this message should work with the cooked roms.
Bye,
Ricardo
andrew_sh said:
machinagod said:
I have a solution for the CID unlocking... But I've toasted 2 devices with it already... So I'm not releasing it.
Another thing is that CID unlocking isn't really necessary. The only case it really is important is the SPL changing, and most of the cooked ROM's don't need a new SPL.
Bye,
Ricardo
Click to expand...
Click to collapse
Thanks for your work, but CID unlocking is important for the prophet users because we are only able to upgrade, not downgrade. So if someone installs the latest version of Dopod ROM and wants to go back to an iMate ROM, it is not possible.
Thanks for your efforts
Click to expand...
Click to collapse
Hmm, with the modified ROMUpdateUtility.exe to ignor the vendor, can't you downgrade too??
machinagod said:
I have a solution for the CID unlocking... But I've toasted 2 devices with it already... So I'm not releasing it.
Another thing is that CID unlocking isn't really necessary. The only case it really is important is the SPL changing, and most of the cooked ROM's don't need a new SPL.
Bye,
Ricardo
Click to expand...
Click to collapse
Hmm, but are you going to try to finish the CID unlocking ?? Your tool is great cause one can return to a previous CID state.
You are the man!
It's work perfectly sim unlocked on a Cingular 8125, I can now use T-mobile or oversea sim card with it. Thank you so much!!!!!!!!!!
machinagod said:
I have a solution for the CID unlocking... But I've toasted 2 devices with it already... So I'm not releasing it.
Another thing is that CID unlocking isn't really necessary. The only case it really is important is the SPL changing, and most of the cooked ROM's don't need a new SPL.
Bye,
Ricardo
Click to expand...
Click to collapse
Howdy machinagod - I've got access to a AKU2.2 device and need to dump the IPL and SPL. (already grabbed the OS, radio, and ext ROM with awizard). Any advice you can give me on getting the IPL/SPL dumped? It's CID locked and r2sd gives a perm error.
Gracias amigo!
machinagod said:
A specially cooked rom should do it...
Click to expand...
Click to collapse
Look here http://forum.xda-developers.com/viewtopic.php?t=48965
Noone knows how to cook a rom for this puprose.
I have had experience cooking roms with your tools but I need some pointers.
Do I have to change only the headers? Do I have to delete the bootloader from the nk.nbf?
Thanks
Andrew
I have big problem with MDA vario Tmobile Slovak. I can not unlock it. I used lokiwiz 2a, lokiviz 3b but still no succes. I downgraded the room to CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE, and other rooms too, but after starting lokwiz, program is waiting (i do not know for what)
www.foony.mscnet.sk/vario.jpg
www.foony.mscnet.sk/vario1.jpg
how long does it take the unlock process?
any advice please to unlock it?
I have active sync 42.
thanks
Related
Hello to all.
First:
I will NOT be held responsible for any problems caused by this tool.
I'm releasing the 0.1 version of the Wizard Unlocker. It's similar to the imei-check.co.uk unlocker (it patches the same bit), however it doesn't cost you £20 per bit :wink: .
Version 0.2: New CID unlocking abitity
Credits for the 0.2 version go to SPV-Developers, namely: itsme, Arc and Arisme...
Version 0.2a: CID unlocking abitity FIXED
Credits for the 0.2a version go to Chan, who took care of the errors I managed to punch in the script when I packed it the first time... Thanks!
Now version 0.2b: Sim Lock abitity FIXED
Credits for the 0.2b version go to kpcomp, who found the missing GOTO End instruction after a SIM Lock... Thanks!
I can't stress enough that this work is heavily base upon the itsme tools, so my thanks to him. Also, spv-developers and xda-developers boards were an invaluable resource.
I would also like to thank all the people that supplied their phone info in this thread: http://forum.xda-developers.com/viewtopic.php?t=33479
Ok, now the instructions...
1 - Unzip lokiwiz.zip to somewhere in your computer
2 - Copy EnableRapi.cab to your Wizard
3 - Execute the EnableRapi.cab in your phone. Wait for it to finish
4 - Guarantee that your phone is connected via activesync with the computer
5 - Execute lokiwiz.bat (on your computer! My inbox is filled with this kind of error) and follow the instructions on your screen...
Frequently Asked Questions:
Q - Will it hard-reset my device?
A - No. It will do a soft reset at the end of the process for applying the changes
Q - I locked my device and now it shows only the SIM Lock window
A - Get your phone showing the SIMLock window. Connect it via activesync. Use the tool to unlock your phone.
Q - Why does a r2sd backup doesn't mantain the unlocking info?
A - r2sd makes a backup of the rom. The unlocking info is stored in the Disk-on-chip, a different memory space altogether.
Q - How about the CID unlock tool? (for using any type of roms)
A - Integrated on Version 0.2.
Q - I'm having problems with Unlocker not connecting to the phone
A - Disable all kinds of Antivirus, Firewalls and similar applications before running Lokiwiz.
Bye to all,
Ricardo Afonso
afonso (dot) ricardo (at) gmail (dot) com
Wow cool! Great job! 8)
i'm gonna try this out and let you know if it worked on my phone.
Anybody want to try before me? ;-)
Can i ask where the file is to download?
Scott
U have to login... Then u see the file... its in an attachment
The file with everything that's needed is attached to the post
Fan-tas-tic! BTW, what are the "utils" for?
WORKS on a T-MOBILE UK version!!!
THANKS!!!!
Utils are part of the itsutils... they are used by the unlocking tool.
You can find more info about the its tools in the xda wiki...
Bye,
Ricardo Afonso
great job!!
)
buzz
will this work an an MDA PRO
Hi,
thanks you are a real machinegod !!!
but the problem and the main question is now........will this work on my MDA PRO of T-Mobile (Qtek 9000) with an T-Mobile Simlock.......!!!!
Please let me know if i can try? Because if it dont work i maybe crash/hamr my device.....Please help us......their are a lot of people who needs an sim unlocker for the MDA PRO and de Orange M5000 asap!
If i can help you with information etc. please let me know.......and if this will work also please let us know
Ok thanks!
Great tool
Before I try, will this also work if your phone is connected via bluetooth- activesync?(i ask because, activesync with the usb cable does not work for me, and crashes my pc) I will wait for a response before trying, just to be on the safe side
Thnx again!
Hi,
MDA Pro will not work with this unlocker. It has a different architecture. While Wizard is very similar to a Typhoon Smartphone, Universal is something different.
I would not recomend to try it in a Universal, although it should do anything bad...
Bye,
Ricardo Afonso
Reaper said:
Great tool
Before I try, will this also work if your phone is connected via bluetooth- activesync? I will wait for a response before trying, just to be on the safe side
Thnx again!
Click to expand...
Click to collapse
It should... but do you really want to put your radio CID on the line? (Yes, I don't trust bluetooth a bit...)
Bye now,
Ricardo Afonso
can we get a definitive list of what devices this works on? A chum was going to use this on his K-Jam...
thanks,
-K
Will unlocking hard reset my device?
No it won't...
I'm still waiting for a few "success" posts before I try it on my vario, but wondered, does this do everything that imei-check does, i.e does it SIM unlock your phone as well as unlock the bootloader?
Thanks
I can confirm that it works! tried it a few minutes ago!!! 8) Now i can use my t-mobile sim in my m3000!
Thank you!! you're great!
hmmm
but if i try this at my MDA PRO.....is this possible?
i mean if it not works is it possible that it harms my device......
I unlocked my XDA mini s ( O²) now my T-Mobile card works fine.
Thank you!
Hello there,
First, thx for the work done on Lokiwiz. I just unsimlocked my Qtek 9100 with ease and very fast. I used Lokiwiz 3.0a and Microsoft ActiveSync 4.2 it gave me the SimLock Code and everything worked perfectly.
I tryed to do the same on my Qtek S200, same tools, same method. But, the DOS windows of Lokiwiz gave me that as SIMLock Code :
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
Commande ECHO désactivée.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
Commande ECHO désactivée.
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
Commande ECHO désactivée.
Commande ECHO désactivée.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0000000000000000
SIMLock Code: wûå?Òç█»7è¶G#═C
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
Click to expand...
Click to collapse
Why its not a regular SIMLock Code with numbers like for my Qtek 9100 ? What I did wrong or how can I transforme that Code into something I can actually enter on my Prophet Qtek ?
thx
Cheers
Roy-B
Up !
Is my question already treated in one another post ?
Or its a noob question ? Or no answers yet for that kind of problem ?
Plz help
thx
Roy-B
its called search and read...
Of course it has been answered a hundred times. If you would have followed the original thread where you got the idea to use lokiwiz from, you would have found out, that when you get only zeros for lock status, it means that your phone is not locked. Also there are few more reasons for that. That, you would have to research and read it for your self just like everybody else.
Thx anyway
Thx for that answer, even if obviously you were too smart and too bored to post that.
Again, sorry to waste some precious seconds of your time to help me.
Roy-B
I have the same problem BUT the Lock Statut begins by : 01000 ....
Can you give me the like where you solve this error ?
Thanks !!!!!!!!!!!!!!!!!!!!!!!
I've been trying to unlock my K-jam with not much of a success, do you think it might be due to the reason i'm using an Hebrew OS on my Jam???
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
Copying C:\Documents and Settings\User3\Desktop\Lokiwiz03\Lokiwiz03\Utils\itsuti
ls.dll to WCE:\windows\itsutils.dll
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0000000000000000
SIMLock Code: ²⌂┼h~¶█Lןσ╔¶עó│`
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
I've been trying to unlock my K-jam with not much of a success, do you think it might be due to the reason i'm using an Hebrew OS on my Jam???
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
Copying C:\Documents and Settings\User3\Desktop\Lokiwiz03\Lokiwiz03\Utils\itsuti
ls.dll to WCE:\windows\itsutils.dll
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0000000000000000
SIMLock Code: ²⌂┼h~¶█Lןσ╔¶עó│`
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
You will need to run EnableRapi.cab on your device first, before run LokiwizMsl.bat on your computer. Also the sim unlock tool that you will need is Lokiwiz 0.3b
You will need to run EnableRapi.cab on your device first, before run LokiwizMsl.bat on your computer. Also the sim unlock tool that you will need is Lokiwiz 0.3b
Click to expand...
Click to collapse
Whats Lokiwiz 0.3b???
Where do I find it?
I've tried to follow your instructions using the 0.3a version > NADA!!!
I received same: SIMLock Code: ²⌂┼h~¶█Lןσ╔¶עó│`
Don't I-Mate K-Jams come SIM unlocked from the factory?
Don't I-Mate K-Jams come SIM unlocked from the factory?
Click to expand...
Click to collapse
Not when you buy it from your mobile carrier, It only comes unlocked when you buy it without a cellular contract but then you need to pay it's full price.
Sorry for the incorrect information. It is actually Lokiwiz 0.3a
Hello all,
I'm new here and hoping someone has some idea of what I'm doing wrong!I've Been looking for a solution for ages and now I am stumped! I've been reading abot all the success with lokiwiz- but I don't seem to getting any!
I have the T mobile MDA Vario UK version. I want to unlock the sim. Using lokiwiz 3a I get this error -
--------------------------------------------------------------------------
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
InitializingThe system cannot find the path specified.
.The system cannot find the path specified.
.The system cannot find the path specified.
...........The system cannot find the path specified.
..........Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
The system cannot find the path specified.
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
The system cannot find the path specified.
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
--------------------------------------------------------------------------
"The system cannot find the path specified." .....Why not? Active Sync is synced as I copied and pasted stuff back and forth. Also with lokiwiz 2b the MS dos window just closes after I type in 'U' for unlock.
One error that keeps popping up when I connect the Vario to the pc is -
"Pocket PC Networking-
Unable to obtain a server asigned IP address. Try again later or enter an IP address in Network Setting"
I click 'OK' and the error goes, but I can still sync my calendat, contacts etc etc and install programmes from PC to Vario.
Could this have anything to do with why lokiwiz is refusing!
ANy ideas anyone?
Cheers people!
use version 3
Hi there and cheers for the reply!
Version 3 worked - the only thing is the code that came out doesn't seem to want to unlock the phone. I put my friends O2 chip in and put the code in as quoted below- refused to unlock. Instead of 'SIMLock Code' should it say 'SIM UNLock Code'?
--------------------------------------------------------------------------
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
Copying C:\Documents and Settings\Administrator\My Documents\Paras\lokiwiz\Lokiw
iz03\Utils\itsutils.dll to WCE:\windows\itsutils.dll
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0100000000000000
SIMLock Code: 45711237
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
Ok call me stooooopid!!!
It works - I left the phone connected to PC after inserting an O2 chip and the screen that asks for the network code was different! I entered the code and it all works!
hmmm
will it work with my spv m3000 AKU2 ROM2.22 ????
please help, I'm trying to unlock my PDA like for 3 days now...
I've just looked at -
http://forum.xda-developers.com/archive/index.php/t-249474.html
Theres a guy called 'guestman' and it worked for him on the spv m3000 .
What error do you get- I'm no Expert though !
The two things I was doing wrong- Didn't have the phone connected to the computer after putting in another operators chip. ALSO when using winzip for unzipping the files, I was dragging and dropping them into a folder I created called 'lokiwiz'....DO NOT do this- use extract on Winzip.
Good luck!
success
Dudson said:
will it work with my spv m3000 AKU2 ROM2.22 ????
please help, I'm trying to unlock my PDA like for 3 days now...
Click to expand...
Click to collapse
unlocked mda from t-mobile worked like a wizard!!!!!!!!!!