hey
do you this problem? when the sound is all the way down, each time you shouldn't hear a sound, you hear a little "tick" (like when you press the "START"..)
what can i do?
I have the similiar problem as well. Please update to the new ROM in www.seeo2.com and this problem should be solved
Upgrading to new ROM will not solve this problem. The only way I found to dispose of those ticks is to turn off Equalizer. Hope this will help.
thanks!
although i am using the equalizer, i prefer to turn it off...
Related
Hi everybody,
I have this one problem. After 2 days of usage, my Hermes suddenly went mute. No vibration or screen click can be heard even If I changed it to the loudest. I missed a lot of calls and sms due to this problem. The only way to solve this problem that I employ is by soft-reset my device.
I really hope somebody can help me tracking to root-cause of this problem and in the same time providing or proposing a solution to it.
Kindly help. Regards
morisa
Device: DoPoD 838Pro
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Phone goes mute
I think I'm having that problem too. Just out of the blue it happened. Didn't install anything extra the whole week. But when someone calls it rings, and if it's missed, it doens't play the miss call tone... or any other sound in that case.
darky said:
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Click to expand...
Click to collapse
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
mmorisa said:
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
Click to expand...
Click to collapse
Got the same issue here and I don't use speakerphone
my pda´s auto mute so
No sound although speaker icon no in mute
I have the same problem. Out of the blue no sound is heard at all. I tried changing volume but it did not do any thing. Had to shut down (not soft reset) and restart device and it works fine. This happen several times and I can figure out why it does this.
If anyone can help...
Tal
Same here, I'm using a X01HT Softbank variant TYTN flashed with the latest HTC WWE rom and after about like 12 hours of use the device goes mute for some reason, making calls it works perfectly but playing sounds or ringers the speaker does not work. Anyone have any ideas? I'm thinking of maybe re flashing the device since most of my information is on my storage card. I'll see if that fixes the problem :-\.
same problem here....
Same here. Only a reboot fixes it.
I have the same problem but it only happens when using the speaker phone. After the call ends, then there are no more system sounds etc. I then have to soft reset, which pisses me off as I use the speaker phone plenty in the car.
If i dont use the speakerphone, then there is no problem. Kind of strange....
Has anyone got any ideas on how to solve this?
I have same problem. I thought it was software related, but seems that it is caused by the speaker phone. I had the exact same problem with my old IPAQ 6515. It must be a software issue with WM although the 6515 had WM2003SE and the TYTN has WM5 so I do not know. Really annoying though as I use this phone for an alarm and it never goes off because the sound turns off sometime while I am sleeping - Uhggggg!
I also have the problem. Only a Softreset brings the speaker back to live.
my new problem...misery loves company
same here; curiously 2 pages into this thread and there are no real solutions.
I have solved the problem on my TyTN.
The Midlet Manager is the root cause for the Phone Mute issue on my device.
lol I just started getting this issue out of the blue after a couple of months and I didn't install anything :|
yeah nothing but a soft reset brings the sound back
Happens to me too. Strange coincidence - I've just checked my m3100 and it's giving me the silent treatment now. Time for another soft reset
I never use Midlets, so that rules the above theory out for me. However my battery was almost dead. I was using WiFi at the time, which turned itself off when the warning notifications popped up. Maybe when the battery drops below an acceptable level it turns the sound off to save power, but doesn't restore it after charging?
nope it happens to me even if my battery is fully charged
this used to happen on my i-mate PDA2k, and my JasJar (Universal) running both WM5, AKU3.2, 3.3, 3.5 and unfortunately even WM6 :S
Hi All,
After checking and testing the phone. I found out that the only way for me to solve the muting problem is by silencing the notification sound when a new email arrives. Since I have an unlimited EDGE/GPRS, my push mail is working around the clock. Thus, by not having the new email sound notify, the muting problem gone. This is caused by the notification event locking up the sound and not releasing it even after I read the mail. Previously the only way to resolve is by soft-reset but now, no more.
I have no idea whether this work or not for others but you might try and post your solution here.
Regards,
morisa
... can be fixed by changing headset volume limiter.
Please tell me how to fix this problem
I got the same problem with my Atom Life. How can I fix this bluetooth problem.
chauchau said:
I got the same problem with my Atom Life. How can I fix this bluetooth problem.
Click to expand...
Click to collapse
Hi, i do not have any problem with the hissing sound. In fact, this have now gone! I now have uninterrupted, clear sounds coming from my stereo bluetooth device.
Does your bluetooth device allow you to enjoy the SRS sound quality?
When i switch on the camera, there is a clicking sound. i swap to a new phone but the system persists. does anybody have the same problem?
coolface said:
When i switch on the camera, there is a clicking sound. i swap to a new phone but the system persists. does anybody have the same problem?
Click to expand...
Click to collapse
Does anybody have this problem? sorta like a clicking sound when the camera is turned on.
I guess it's the macro-focus?
actually i went to O2 and they say its normal and all Atom Life has the same problem. Try placing the phone next to your ear while the camera is switched on, you should all hear a soft clicking sound.
No clicking sound on my side. I have another fu..ing issue. The camera opens in macro mode (also with the indicator OFF position) and remains always unfocused. Take a normal picture it's not possible!
I e-mailed O2 and they said me to hard reset the device (what a customer support )
It made me hungry but i cannot stop laughing buuaaahahahaha
Anybody had the same issue?
Any solutions?
Hi, I am having a XDA Neo, with Prophet Touch VII. Until 3 weeks ago or so I didn't have problems. Since then, always when I press the red button for hanging up, I hear a strange quite loud noise. Its loudness is dependent on how loud I set the device-settings.
Of course, I have NOT activated the sounds for "Hardwarebuttons" under "Sounds and Notifications".
Does anybody have a similar problem? Do you think a hardreset could help?
Thanks,
Riesi
Check this ... I think that is the same problem
http://forum.xda-developers.com/showthread.php?t=367985
Try this turn off keypad tones and soft reset ...
if the strange noise go away is the same problem
Yes, thanks. When I turn off keypad sounds, the noise also disappears. I am going to flash to Throttle III anyways as soon as Gullum publishes it. I hope I can turn on the sounds again then...
Besides ...other ROMs have the issue, try it with others and maybe the noise come back ... Gullum said that is a problem in some new builds ...
as you can see in the other post only are available a Work around solution...
tell us how work other ROMs..
Laters.
hello,
I would like to know if you can help me with the sound problem i have with the x1. pretty much after you turn on the phone after a while the sounds jus gone, including all the system alert. and everyhing. speaker phone dont even work.
tried al the resets, stil the same?
would this be the software problem? please help
thanks
If the volume is turned all the way down the phone will not sound any alerts either. It's a stupid implementation and should be fixed in the next firmware update. (The silent mode should suffice for this.)
hi there
i have a Hermes, exactly the T-Mobile version..
anyway it worked fine till one day i got no sound at all, no mp3 no notifications, nothing....
except the boot up sound... checked the forums, seems it's a common problem, and i figured that the rear speaker works (since the boot up sound comes from it), the speaker cable is connected so i have no clue... if it would be broken, than the boot-up sound wouldn't come at all from the rear speaker, riight?
changed like 5-6 ROMs so far, from 6 to 6.5, no changes with sound...
any clue guys what to do?
I'd need to solve this asap...
thx for any solution
can please someone at least confirm me if my rear speaker is dead or not?
cos i hear the boot up sound from it but no other sounds...
please ,its urgent, thx
Well, the first thing that i would consider doing is backup my important data and do a hard reset....why don't you try that too....?
okay
got from ebay a new speaker... changed it and it doesnt work either...
hard reset and changing the ROM (6-7 of them) didn't help...
at beginning the sound could be heard at boot only while playing music, ringing and that stuff was mute... after 2 days the sound at boot disappeared too...
so, does anyone have a solution? when i plug the microUSB to 3.5mm adapter i can hear the sound on my earphones, but there is no sound when played normally on the ppc itself...
can anyone help me to solve this? where could be the problem?
thanks
okay...
going mad really... now i flashed an original AT&T US rom (although i have a tmobile EU) and guess what.... i hear the sound back again, but only at boot up... other sounds in winmo (ring, mp3, music, programs) are dead... can't hear anything although the volume is set at max...
so... i assume this can't be a hardware issue..
before this ATT i changed like 6 more different roms and all with same problems... now i have sound only at bootup... does anyone know where is the problem and a possible solution?
thanks
cmon guys... don't tell me no one has no idea what to do.....
i've been flashing and reflashing the roms but so far i can get only the boot up sound... any other sound is not available.. why? how to repair it?
thx
it's funny to see you can ask sometimes questions no one knows to answer
you've tried it by using the head set...?
whether the results were the same as well (no sound)..?
when using a headset (extUSB) there is sound and everything is normal...
Papcina said:
when using a headset (extUSB) there is sound and everything is normal...
Click to expand...
Click to collapse
you'd better check the speakers on your device , may be the connecting cable is damaged and if necessary you replace ....
I have the same problem here!!!Have you fixed that??Can you suggest me something, please???
Hi all... new here
I also have the same problem on my AT&T 8525. The Telephone speaker works but the phone doesn't ring or give audio notifications any longer. I've done a hard reboot 3 times. Bluetooth audio works fine. But no speakerphone. If anyone has a solution we'd appreciate it!
Thanks!!!
nonsuchpro said:
Hi all... new here
I also have the same problem on my AT&T 8525. The Telephone speaker works but the phone doesn't ring or give audio notifications any longer. I've done a hard reboot 3 times. Bluetooth audio works fine. But no speakerphone. If anyone has a solution we'd appreciate it!
Thanks!!!
Click to expand...
Click to collapse
you see in the WIKI, because there is described several ways to increase the BT A2DP sound quality and sound notification by Changing the Registry