I've tried searching, I can't seem to narrow my search enough to get relevant results.
I installed NullKB to block the annoying SIP popup from searchfromtoday. I first installed it to the memory card, and went into settings ~> input and selected it as the default input method. I go back to my today screen and the SIP still pops up when I tap the searchfromtoday box. I think that maybe it needs to be installed in main memory to work, so I uninstall, and reinstal to device. Still the same thing. I noticed that I can go into input, select nullkb, tap OK, then come back and it goes back to keyboard. It's like the change to nullkb won't "take" so to speak. Any ideas? Search from today is amazingly useful, but the SIP popup is a deal breaker.
Another quick question: How do I make programs launch on startup? I like to have magicbutton task manager launch everytime I start up the device. As it is now I have to open it after every reset.
If i remember correctly if you go into magic button settings, there should be an option to automatically start.
As a rule if you want a program to startup when the device starts place a link in the windows\startup folder, i.e. a lnk file to the program.
MSigler - after installing NullKB, try a soft reset. Also, don't set it as the default keyboard through the registry - if you do, you may end up with the device not booting anymore and requireing a hard reset (lose all data).
Mark - Thanks for the tip, I found that, but I'll use the startup trick in the future.
I did do a soft reset and it still doesn't work.
Related
Hi,
Selecting my settings option from the start menu hangs my phone. All other options (programs etc are working).
Interestingly when I tried to setup an icon in iLauncher for say my today icon it just hangs too.
I am assuming the settings folder must have got deleted/corrupted somehow.
Any ideas?
Regards
I would suggest a hard reset. Anything you do to fix the problem will not guarantee that everything works properly. Many softwares use the settings programs and/or links.
Hard reset completed and appears to be working fine. Time will tell if it was Vito Button mapper or the registry entries I did which messed it up.
I recently just noticed that when I browsed using Pocket Internet Explorer (PIE), the "Back" button on the bottom left hand side is no longer shown. It only shows the "Favorites" button, thus I can NOT go back to the previous web page.
I didn't make any registry changes or anything like that and the only programs that have the capability to changes hardware button settings are SpB Plus and SoftKey and they don't have the option to change the PIE application button.
Anyone know how I can bring the "Back" button back?
It only shows "favorites" when there is nothing to go back to. ie the first page of the session. As soon as you navigate to the next page it changes to "back"
That is correct. But what I meant is that even after I navigate to a website, the button still shows as "Favorites".
I.e. From "Home" screen, go to cnn.com, then go to yahoo.com. The "Back" button is not shown and I can't go back to cnn.com
sparkyxda said:
It only shows "favorites" when there is nothing to go back to. ie the first page of the session. As soon as you navigate to the next page it changes to "back"
Click to expand...
Click to collapse
lanwarrior said:
That is correct. But what I meant is that even after I navigate to a website, the button still shows as "Favorites".
I.e. From "Home" screen, go to cnn.com, then go to yahoo.com. The "Back" button is not shown and I can't go back to cnn.com
Click to expand...
Click to collapse
Things to check:
Have you changed any setting that disables the PIE cache.
Is PIE able to cache pages eg is it to storage card and does it's folder still exist and is SD card reachable.
Perhaps try changing cache location?
Mike
Yes, I did change the PIE cache location to "Storage Card". That folder exist in File Explorer and I can see in "Storage Card" that there is a "Temporary Internet Explorer" folder.
I tried changing the size of the cache, move to "Extended ROM" and ROM storage, but to no avail.
I removed (but not uninstall) WisBar, thinking it may change it, but also to no effect. However, I don't think WisBar did anything to it, since it only skin the application.
I am thinking that some application may messed up PIE, but all the apps that I installed are the same ones I have installed in my old MDA and there was no issue on the MDA. If there is some registry change I can apply to fix it, do let me know.
Mmmm.....
Couple of things I'm curious about - SpB Plus and SoftKey. I don't have either of these. But It's worth setting back any setting you have entered since your problem developed. Just because it has no specific setting does not mean that a seemingly non related change has not caused problem (for example if you set smooth scrolling in PIE using say Tweaks2k2 you will find the tab behaviour when sending SMS messages has changed!). Do not just uninstall these apps as this will not reset the registry changes they may have made.
The reason I asked about cache was simply that with no cached pages to return to there would be no back option available,
Of course you will have a nice SPB backup or two available to restore with won't you!!!? I play around with mine so much (!) that I keep several backups at various stages of application installation and over time.
Also curious to know if your history is being recorded in PIE drop down list in URL box. At a pinch you could use this as a rough sort of back button.
I have not looked into all the registry keys for PIE. This forum Wiki or indeed the wiki for some of the other devices may already have the keys mapped out . I did find info on setting cache size.
In the end it may be simpler to hard reset if those backups are not available.
Mike
Thanks for the detailed info, Mike.
I did disable SpB Plus, but to no effect. At the end, I uninstalled WisBar, Spb Plus, and SoftKey but nothing change either.
Yes, I can do hard reset, but I am trying to avoid that because I have to re-install everything. I have a "base" backup using SpB backup, but it still requires me to install other program as the other daily backup sets may already have corrupted PIE registry.
I am hoping that I can do something about this via the registry, unless this is something that really require hard reset just like the issue I have with duplicate notifications. i.e. after soft reset, the alarm reminder and sound will start although no appointment or task is scheduled at that time.
Now I know why PDA is not popular for most people.. it's just too damn fragile! And I used Windows CE since the time of Cassiopeia...
I've installed and uninstalled several keyboard input software in the past few weeks including Resco Keyboard, Hikeyboard, and is about to try out Ten-Go.
I have the following problems:
1) I'm unable to uninstall Resco Keyboard cleanly. Using file explorer, I managed to delete away the unwanted directory. I've also used Register Edit to remove the entries whenever I see it. However, I still see Resco as one of the choices when I select the input method while using the soft keyboard.
Can anyone tell me how I can get rid of this entry?
2) More serious problem is that I cannot select the keybaord that I want anymore. Only the default keybaord is appearing no matter which other one I try to choose. Even if I set it to be the default keyboard, the system seems to ignore it completely.
Soft reset does not cure the problem. I hope to avoid a hard reset if I could. Can someone help?
Try this little app to change your default input panel. Hopefully it'll solve your problem.
Hi Cayotte,
Thanks for the CAB file. Unfortunately it does not help. I could choose, say Ten-GO with the select button. Then the application will exit. If I come back again, it is reverted back to the standard keyboard. If I choose block recogniser, it will stick. Letter organiser sticks too.Phone pad also sticks. Symbol pad and transcriber all would also work, with or without this utility.
The problem is it will not allow the others to be selected. These include TenGO, PenPower, CE-Star input method. They could not be made default. They also could not be selected at any place.
cayotte said:
Try this little app to change your default input panel. Hopefully it'll solve your problem.
Click to expand...
Click to collapse
Useful app - Thanks.
What does "Initial Delay" do?
eaglesteve said:
I've installed and uninstalled several keyboard input software in the past few weeks including Resco Keyboard, Hikeyboard, and is about to try out Ten-Go.
I have the following problems:
1) I'm unable to uninstall Resco Keyboard cleanly. Using file explorer, I managed to delete away the unwanted directory. I've also used Register Edit to remove the entries whenever I see it. However, I still see Resco as one of the choices when I select the input method while using the soft keyboard.
Can anyone tell me how I can get rid of this entry?
2) More serious problem is that I cannot select the keybaord that I want anymore. Only the default keybaord is appearing no matter which other one I try to choose. Even if I set it to be the default keyboard, the system seems to ignore it completely.
Soft reset does not cure the problem. I hope to avoid a hard reset if I could. Can someone help?
Click to expand...
Click to collapse
Have you try this simple solution...
1. install Resco keyboard again. Soft reset then test if it works.
2. select default keyboard as your current SIP
3. uninstall Resco keyboard.
With these steps, hopefully it cleans all resco registry...
Good luck.
I solved the problem. TenGO's founder actually posted his solution at another forum. In summary, this is what you have to do in order to make TenGO selectable.
1. Ensure TenGo was installed in the device, and not the storage card.
2. Close up all plugins
3. Remove storage cards
4. Let the selected keyboard be the default one, if it is not already the case.
5. Go to setting>Personal>Input method. There you are able to choose TebGO and the default input method. In the option screen, check that it is the default.
6.Switch off the device
7. Soft reset
8. Go to an application such as word or excel that needs a keyboard.
9. You should see that TenGo is now the default keyboard.
10. You can now put back your plugins, then switch off the unit.
11. Put back your SD card
12 Do soft reset again.
After this, TenGO should be always selectable.
This is a very interesting, powerful, and quick input method. Try it.
Edit:
Go to www.free.tengo.net for the free version and www.tengo.net for commercial versions.
bastono said:
Have you try this simple solution...
1. install Resco keyboard again. Soft reset then test if it works.
2. select default keyboard as your current SIP
3. uninstall Resco keyboard.
With these steps, hopefully it cleans all resco registry...
Good luck.
Click to expand...
Click to collapse
Bastano, thanks for the tip. I saw your post only after my hard resets.
After my first hard reset, resco obviously was not there. But it returned after the sprite restore.
After the second hard reset, I avoided that route, choosing instead to reinstall all applications one by one. Almost all data need by restore as there are already in sd card. A async took care is the rest. After this, resco was by more there.
I now have the free version is tengo. What a simple,intuitive,quick,and smart keyboard!
I've found another way of overcoming the sip selection problem. There is no need to disable today plugin, Just do a safe mode reset, then you will be able to select without problem. After that, do a normal reset.
I just discovered that even if you have managed to use the above methods (i.e SIP change program, or disable all plugin, or safe mode reset) to successfully select the desired SIP, the selection reverts back to the standard keyboard once Compaction Thread kicks in (This is when the WM5 file system starts working very heavily and freezes up the unit for minutes or hours).
In order to minimise the chance of this happening, ensure you do not install programs into the device (instead, it should be to the storage card or microdrive) unless the program creators requires it to be so.
One of the steps I've taken in order to avoid memory shorfall is to relocate all PIE and Opera Cache/history/cookies from the device to storage card.
See this thread on how I did it.
http://forum.xda-developers.com/showthread.php?t=310420
Mods - I don't even know where to put this (although I've looked for similar posts, sites, wikis, you name it, I haven't seen it).
My touch screen doesn't work, I don't have a start menu that has anything in in except "Today." The rest is blank. It didn't disapear right away, either. My touch screen worked after one soft reset, and I still had the expected display of the start menu, but none of it worked. Somewhere in the middle of all that my .tsk changed to the default. After another reset, I am here:
No Start Menu (Today option only)
Default .tsk
No links from Ultimatelaunch to startmenu links work, but links to Programs themselves do (in Program Files)
No CommMgr via hdwe key, but my wifi was on when this all started, and keeps restarting, without recognizing my network (I just re-entered my WEP key)
the joystick works, and the keys do things, but the camera and CommMger keys can't find thier apps.
the joystick won't select my wifi bubble radio button, but otherwise works.
AEBPlus stopped working, so I can't get to my MortButtons to launch anything else.
Since I don't have a start menu, I don't have a file explorer I can get to (yet I have 3....)
Phone works (but only using hdwe keys)
I can't do much else (no screen print uless you want me to take a picture of it with my Wiza200)
I'm doing quick copy of my Program Files and App Data foldera to catch all the changes I did today, the rest is synced (but I'll copy what I can) via a Guest partnership, since the name of the device seems to be gone as well.
I was playing with assigning hardware keys, fisrt with AEBPlus, then I switched to Calligrapher's config mgr (I was trying to regain the functionailty of button 3 press&hold, which went away with assigning the other keys with AEBPlus). It was all I did, besides play a few audio files with Vito Audio Notes and Vito Sound Explorer, since my last reboot.
Prior to that I was trying to get my video streaming up & running this way:http://wiki.xda-developers.com/index.php?pagename=FlashVideoBundle
, and I installed Vito Metronome (just to see. kind of a waste. KOOK K-met is better, even tiny on VGA), and MccMobile Finder, but had reset a few times to recheck my timing in a Mortscript to bring back my today screen after having MccMobileFinder and Vito Audio Notes launch on start up (niether of which will automatically minimize.)
I had just entered all my reg codes earlier today, and I know there are too many, so this sucks.
Are there any viri (viruses, I guess) that might do this? I mean, yeah, I can spend an hour or two (I'm afraid it might be more, since things go all complicated on me all too quickly) getting back to running, but what the *{^ ( |<* happened?
I hope I'm off my rocker for the moment and no one ever sees this happen to them. Any ideas?
New development: I loaded up, started doing a few things I need to do manually (I like to do my AEBPlus, and have never been successful at imprting Phonealarm setting), and lo, I soft reset, and the boot screen stcuk. The red boot characters went away, but the button lights never turned on.
Can anyone tell me if I should be sending it in to PPCTechs, or might this be a ROM (or software????) issue.
Any input is welcome.
Have you tried hard reset? If yes and still unsuccessful, try re-flashing the ROM.
something similar happened to me once when i banged my phone on something..
all shortcuts / programs dissappeared...
i only had 2 options in start menu..
did a hard reset and everythign was restored
Yesterday, something suddenly went wrong with my phone. It became very unresponsive; programs wouldn't open, screen froze.
I had CHT 1.8.5 installed and suspected it may have something to do with that (though I'm not sure at all). I managed to uninstall it and get the original Sense back, but a number of things are still broken:
* Start menu: can't open it, neither with hardware Windows button nor with onscreen start button.
* Right hand corner icons "x" and "ok" don't show.
* Text input doesn't work: I can type on the soft keyboard but the letters don't appear.
I want to do a hard reset but would like to backup my text messages first. Problem is: I can't input my Windows Live password in MyPhone, since text input doesn't work.
Does anybody know what's wrong here and how to repair it? Or are there any other reliable ways to backup AND later restore text messages, that don't require text input?
Edit: I can use Resco explorer (except for text input) and most other programs, but it takes some trickery as they don't come to the foreground when I open them from the Sense home tab.
still have the problem?
the absent start menu and X buttons sound like a symptom of an overeager task manager terminating Shell32.exe. A soft reset will bring them back, until the task manager kills them again. I had the same problem with WKtask or xTask if i forget to exclude shell32.exe and mainila.exe from the exclusion list, (LINK).
if you don't have those task managers, but can still use the touchscreen for other things, then install MyMobiler in your PC to control the HD2 via usb. Do a full system backup, and use ActiveSync to start uninstalling a couple programs at a time until the problem goes away, and you'll know which program did it.
also, turn off CHT's lock screen, it causes more problems than it prevents. the stock hd2 lock screen should be good enough.
absent text input panel? don't know about that, but again, MyMobiler will take care of that from the PC.
Damn... that's a very informative reply. Thanks very much. I wish I had waited just one more day but I already performed a hard reset.
Still, it's great to get a little more insight on this as I was baffled by the behaviour of my phone. And I've seen a lot of weird things over the past years with different Windows Mobile devices. I don't know what could have caused Shell32.exe to shut down as the problem was present immediately after each soft reset, and I only use Resco Explorer's task manager which, I think, excludes critical stuff by default. And then there was that weird text input issue as well: it's not that the input panel was gone, but when typing on it the letters never appeared. I tried my Bluetooth keyboard and that didn't work either.
The touchscreen was still usable though, and your solution would probably have worked and saved me a lot of trouble...
I wonder if CHT's lockscreen could have been the problem. I uninstalled CHT first thing right after everything went wrong, but its lockscreen was enabled before that and maybe the uninstall left some unwanted stuff in place that kept causing trouble.
Anyway, thanks a lot for helping me understand a little more about all this.