Related
So, I'm experiencing what everybody else is with this ROM. That initial volume level starts out soft and gradually increases to the max that I have it set to. Some have stated they like this and that's fine. But, I HATE it :evil: . I can never hear my phone ring anymore if it's in my pocket. Has anybody found a possible registry key or setting somewhere to turn this off?
And if any AT&T folks are listening.. I'd like a setting in the volume area to turn this off or on.
Phone Profile
Have you check under phone profiles... Ascending Ring change to Standard Ring
Dustoff
I don't have a phone profile, or i should say i don't see any where for that option. In the phone settings area the Ring Type is set for Ring. There is an option for "Increasing Ring" but that's even worse than it is already. I don't think this is what I'm looking for.
Since the WM2003 upgrade on my SX56, 've noticed issues with the speakerphone volume. I can barely hear it in fact. Any thoughts on this one?
Fiddled around with the volume setting, moved it up and down, and the now the volume issue seems resolved. Can't say for sure if that's what resolved it, but it's fine now.
I'm experiencing the same problem with the AT&T rom.. I'm going to take a look around in the registry later on... before I go installing any apps
Well I have taken a look @ the processes running and can't see anything obvious that would be doing the volume thing..
So I have had a poke about in the registry and have found a section with sound profiles and it has an attenuation property, I have tried adjusting this, and deleting it but still no good
Also there is an entry in the registry called Hack and mentioned Vol in the string... but it didn't make any difference when I deleted that either :roll:
If anyone thats a bit more acomplished than myself with the PPC Phone could take a look and find a solution to this, i'm sure many users would appreciated it
Has anyone figured out how to make the volume level constant yet?
Any solutions to get the volume working well on A.30.09 ENG yet?
Nope. I just put my phone volume on next to the top setting and the system volume two levels below it. Works fine then. As long as the system volume is two levels below it will not graduate the sound.
valheru said:
Nope. I just put my phone volume on next to the top setting and the system volume two levels below it. Works fine then. As long as the system volume is two levels below it will not graduate the sound.
Click to expand...
Click to collapse
Another thing try ur Reminder set an Alarm you'll notice that you cannot change the Alarm1 ringtone thus the sound stays low ..I tried many things in the registry and no luck as well I wish would some1 help us to resolve this Issue, but!! I made contacts with att's support ,I told them about this problem thus I'm not the only one who's experiencing this, lots of ppl sees this ennoying , I hope they would help here...
I just finished installing the new SX-56 WM03 ROM on my O2 XDA I unit. Having tried the new ROM for hours, I find it quite satisfactory and stable compared to its predecessors but there seems to be one set back though, the volume!!! It's quite noticeable that the volume had been tweaked down to about 30%, and they just made it more impossible for XDA users to hear whether there's an incoming call or message. Is there a way around this? I really hate to switch back to my old ROM just because of this!!!
Expert Advice Needed!!!
Your help will be greatly appreciated...
I have same problem... I think it's bug. If I set the system volume high, then the phone ring silent, if I set the system volume low, then the phone ring loud...
If you set the phone to 80%, means to klick under max. Than you can use 100% phone ring and volume.
Yup, that's exactly the case! you set the volume at 80% and it gives a louder voulme than having it set on 100%. I guess there is someone here who knows how to get around this problem...
So does anyone really have a clear solution to this problem? like a program I guess?
ohenry774 said:
So does anyone really have a clear solution to this problem? like a program I guess?
Click to expand...
Click to collapse
The solution: switch to ROM T-Mobile 2003 v4.01.16 ENG, and it's look like working fine without AT&T sound level bug.
I downloaded directly from T-Mobile, but I think You can find it at ftp://xda-developers.com
Is there a way (registry hack, any other program) to increase the volume of the speaker during the phone conversation? I also own a Hermes and the speaker volume of the Trinity is so low compared to it that I can sometimes barely hear the other party. Any help?
onurd said:
Is there a way (registry hack, any other program) to increase the volume of the speaker during the phone conversation? I also own a Hermes and the speaker volume of the Trinity is so low compared to it that I can sometimes barely hear the other party. Any help?
Click to expand...
Click to collapse
Are you aware that turning the wheel on the left side you can change the volume while in a phone call?
anonimo said:
Are you aware that turning the wheel on the left side you can change the volume while in a phone call?
Click to expand...
Click to collapse
I have the exact same problem. When I am in a public place and when there is some noise around, I hardly hear the person I am speaking to. Even when I turn the wheel on the left to maximum
I have spent a lot of time looking for a solution but I have just seen that for some qtek devices, there is the key [HKEY_LOCAL_MACHINE\SOFTWARE\HTC\AUDIOGAIN] with values EARPHONE_UPLINK_VOLUME and RECEIVE_UPLINK_VOLUME, that allow to modify the max output level of the speaker. But I didn't find that key in the trinity
Even if I turn the scroll wheel all the way up, the volume is too low.
The audiogain registry key (although it doesn't exist in trinity's registry) is actually to improve the sound quality of the microphone and not the volume of the phone.
When I first make a call, when I hear the first ring, it is actually louder but then from the second ring on, the volume decreases at least by 25%.
Anybody with any ideas?
anyone figured how to increase call volume yet?
I would also appreciate a solution to improve the Speakerphone volume.
I would appreciate any fix to increase the volume of anything!
The included stereo headphones are completely useless! My god, why did they even put a volume dial on the headphones? I can barely hear anything with this crap phone...
A pity considering every other features works just perfectly.
ive got the same problem, before the bass fix, the volume was high but with a really unstable and bad sound... after the fix, there is kind of better sound but in phone calls the volume is low.. i really start hating this device......
I've been using my new p3600 for two weeks now, and this low speaker volume issue is killing me. I've been a Noia user for years, and the difference in sound quality during normal calls is simply unacceptable. The p3600 has so many awesome capabilities for such a small phone, but when it comes to the most basic function, I'm quite disappointed with.
I would also appreciate a fix to improve the quality of the speaker.
Cheers
i can say that this is not the only problem, there are so many others that i stopped thinking of this one... im going for a final hard reset now.. im really tired...im sick of it.....
Someone has an idea ?
Has anyone found away to increase the incall volume yet ???
Someone posted this registry hack elsewhere (use at your own risk of course)
1. HKEY_CURRENT_USER
2. ControlPanel
3. SoundCategories
4. InCall
5. InitVol
6. Change the DWORD value to 6 (Default = 2)
7. Click Done
Wait approx 10-15 seconds before testing.
PS. If the registry key or value doesn't exist, you can always try creating it.
Has anyone tried this??
What was the outcome??
ausi said:
Has anyone tried this??
What was the outcome??
Click to expand...
Click to collapse
Yes i tried it and it never worked for me ...
i can also confirm that this does NOT work on the trinity, anyone else have any bright ideas...
Ah ha...
I just bought Dopod D810(HTC Trinity) for my wife yesterday, and just now she complained to me about this "low on call volume" to me. And since I'm the one recommended her the phone I have to responsible. LoL.
But despite this problem, all of other features are flawless, complete, with excellent case design. Kudos to HTC!!
Btw, this is kind of dejavu for me since it also happened on my Eten M600 back then. This issue can only be solved on driver level, i.e: patch the RILgsm.dll, or include this patched driver in newly cooked ROM.
On which, I don't have the necessary skills to do that... -sigh-
Any expert users can help us???
schizo said:
Ah ha...
I just bought Dopod D810(HTC Trinity) for my wife yesterday, and just now she complained to me about this "low on call volume" to me. And since I'm the one recommended her the phone I have to responsible. LoL.
But despite this problem, all of other features are flawless, complete, with excellent case design. Kudos to HTC!!
Btw, this is kind of dejavu for me since it also happened on my Eten M600 back then. This issue can only be solved on driver level, i.e: patch the RILgsm.dll, or include this patched driver in newly cooked ROM.
On which, I don't have the necessary skills to do that... -sigh-
Any expert users can help us???
Click to expand...
Click to collapse
hi this link doenst work "include this patched driver in newly cooked ROM"
zohaer21 said:
hi this link doenst work "include this patched driver in newly cooked ROM"
Click to expand...
Click to collapse
Sorry zohaer... my post does not contain hyperlink.
I just underlined it to stress up some points...
push!
also need a solution
Sorry if this appears to be a repeated post, but i've seen a post with a supposed hack that has satisfied at least one user but others (including me) still are not satisfied with the phone volume. Unfortunately the post is misplaced IMHO in the Hermes upgrading section. Here was my question about the so called reg hacks and phone volume. Someone please help:
Are these hacks specific to certain ROM versions? I have the HTC ROMs and tried these and i still find the volume to be low. I had the original iMate (Himalaya) then the Prophet now Hermes.
Of all three, the Himalaya had incall volume close to a normal phone. Since then i found the Prophet to be way lower. A ROM upgrade helped somewhat. I thought my dissatisfaction with this would end with the Hermes purchase but i think the incall volume level is even lower than the Prophet!!!
I can't believe i'm the only one with this impression. Volume levels can be a bit subjective so i'm not sure how easy it is to compare with others. But if for instance you hold the device at a couple of feet away from your ear (less than an arms length) and replay a voice mail message at full volume, can you hear that there is any audio coming out of the device? Even in a relatively quiet room, just TV playing quietly in the background i can 't tell.
Someone with a Razr or any normal phone can be heard (other party on line) from many feet away at max volume.
This is my one o/s issue with this device. The speakerphone vol is much better than the Prophet and is quite good.
Anyone found a real universal solution for ths incall volume issue yet?
first using HERM200 with
ROM 1.18.255.3
Date 07/22/06
Radio 1.16.00.00
Ext ROM 1.18.255.106
then updated on Mar 26 2007 to
ROM 2.11.255.1
Date 03/07/07
Radio 1.38.00.10
ExtROM 2.11.255.102
ieh said:
Sorry if this appears to be a repeated post, but i've seen a post with a supposed hack that has satisfied at least one user but others (including me) still are not satisfied with the phone volume. Unfortunately the post is misplaced IMHO in the Hermes upgrading section. Here was my question about the so called reg hacks and phone volume. Someone please help:
Are these hacks specific to certain ROM versions? I have the HTC ROMs and tried these and i still find the volume to be low. I had the original iMate (Himalaya) then the Prophet now Hermes.
Of all three, the Himalaya had incall volume close to a normal phone. Since then i found the Prophet to be way lower. A ROM upgrade helped somewhat. I thought my dissatisfaction with this would end with the Hermes purchase but i think the incall volume level is even lower than the Prophet!!!
I can't believe i'm the only one with this impression. Volume levels can be a bit subjective so i'm not sure how easy it is to compare with others. But if for instance you hold the device at a couple of feet away from your ear (less than an arms length) and replay a voice mail message at full volume, can you hear that there is any audio coming out of the device? Even in a relatively quiet room, just TV playing quietly in the background i can 't tell.
Someone with a Razr or any normal phone can be heard (other party on line) from many feet away at max volume.
This is my one o/s issue with this device. The speakerphone vol is much better than the Prophet and is quite good.
Anyone found a real universal solution for ths incall volume issue yet?
first using HERM200 with
ROM 1.18.255.3
Date 07/22/06
Radio 1.16.00.00
Ext ROM 1.18.255.106
then updated on Mar 26 2007 to
ROM 2.11.255.1
Date 03/07/07
Radio 1.38.00.10
ExtROM 2.11.255.102
Click to expand...
Click to collapse
I'm with you ... this low volume thing sucks ... and I am surprised more folks are complaining about it too. Hopefully someone has a solution.
For a while there i'd thought it was my device only.
The thing is if you browse through the registry there are quite a few "volume" keys and values. I've tried a couple to see if by trial and errror i could get some volume increase but no progress.
Isn't there anyone with contact to HTC who can help? I find it strange that there would be no way to get more audio. Especially since the handsfree volume is so loud, you can get good volume playing back mp3s through the wired earphones but the incall (even through the wired earphones) is so low.
Could it be a hardware issue? (therefore not possible to fix with registry hacks).
It is true, it is sooo quiet! I tried several ROMs and several radios... Seems that only the different radio versions make some difference... Haven't tried any registry hacks yet...
I also think the in-call volume is very low. The hack appears for be for AKU 3.3 ROMs, but I haven't done that upgrade yet and search really hasn't turned up much of anything for the earlier ROMs
Mike
zim2dive said:
I also think the in-call volume is very low. The hack appears for be for AKU 3.3 ROMs, but I haven't done that upgrade yet and search really hasn't turned up much of anything for the earlier ROMs
Mike
Click to expand...
Click to collapse
Same here. UK T-Mobile MDA Vario II. In call volume too low but just like everyone else the speakerphone too loud! Hopefully someone will identify the registry hack - there must surely be one?
I'm in the same boat and would love to see more attention going into the phone part of this PDA Phone--thanks to anyone who can help identify the registry hack or help solve this.
I, also, am displeased with the low in-call volume of my hermes. I've had the stock (Cingular) ROM, and now the XDA Live 0.20 WM6 ROM and the maximum in call earpiece volume was the same unacceptably low level in both cases.
Surely someone knows of a fix?!
Not sure how relevant this thread is - Cingular only:
http://forum.xda-developers.com/showthread.php?t=295074
Mike
Worth noting that this is not a universal problem. Mine for example with in call volume at max using scroll wheel whilst on call is WAY too loud!!
Mike
Thanks for the link. Alas, the other thread appears to be for the newer almost-official Cingular ROM... I think most of us here are looking for an equivalent hack for the older ROM (yah, I know we could just bloody upgrade.. but I'm taking my upgrades one step at a time ).
And yes, as a data point, I am on Cingular.
Mike
zim2dive said:
Thanks for the link. Alas, the other thread appears to be for the newer almost-official Cingular ROM... I think most of us here are looking for an equivalent hack for the older ROM (yah, I know we could just bloody upgrade.. but I'm taking my upgrades one step at a time ).
And yes, as a data point, I am on Cingular.
Mike
Click to expand...
Click to collapse
I am using the latest rom (Non-Cingular) so i don't think that's the issue. Is it perhaps only the Cingular ROMs ave this issue solved?
ieh said:
I am using the latest rom (Non-Cingular) so i don't think that's the issue. Is it perhaps only the Cingular ROMs ave this issue solved?
Click to expand...
Click to collapse
I would not be surprised (if Cingular were the only ROMs with the issue)
Cheers,
Mike
My incall volume problems r solved.. with these regedits..
I only changed the values to CC in these 2 keys in all Audiogain keys (resco regeditor)
EARPHONE_UPLINK_VOLUME
RECEIVE_UPLINK_VOLUME
HKCU\ControlPanel\SoundCategories\InCall\AttenuationCategory=0
My call quailty has improved a lot. i could barely hear the callers voice earlier.
Thanks to EVA_D and MOLSKI
zeusin said:
My incall volume problems r solved.. with these regedits..
I only changed the values to CC in these 2 keys in all Audiogain keys (resco regeditor)
EARPHONE_UPLINK_VOLUME
RECEIVE_UPLINK_VOLUME
HKCU\ControlPanel\SoundCategories\InCall\AttenuationCategory=0
My call quailty has improved a lot. i could barely hear the callers voice earlier.
Thanks to EVA_D and MOLSKI
Click to expand...
Click to collapse
I dont have the Audiogain reg entrys... Where can i find it?
smarty77 said:
I dont have the Audiogain reg entrys... Where can i find it?
Click to expand...
Click to collapse
Same here.
smarty77 said:
I dont have the Audiogain reg entrys... Where can i find it?
Click to expand...
Click to collapse
HKLM\SOFTWARE\HTC\
audiogain,0,1,2 are there in mine.. but i am using a prophet... pls check
no audiogain
I checked that already... also loaded another ROM... (LVSW) but also in that image no entry's called audiogain.
smarty77 said:
I checked that already... also loaded another ROM... (LVSW) but also in that image no entry's called audiogain.
Click to expand...
Click to collapse
Hi, i did experiment with the tweaks, to be honest now i am not sure if they actually help. The audiogain tweak seemed to work on my PDA when i had WM6 running. But for Wm5, i dont need to use it, my prophet sounds fine.
Am tired of buggy wm6, so back to fast n stable Aserg rom, which has no sound issues for me..
no updates? mine SUCKS!
Ever since I purchased my HD2 (Telstra) in February, I have had a problem where the ring volume intermittently switches off and I cannot hear incoming calls. At some stage after with no attempted fix, another call comes through and the phone rings fine at the volume I have set. The problem doesn't seem to be attached to certain callers, it seems to do it at times no matter who calls.
The phone actually rings (albiet silently) when the problem occurs as I see the phone go to the incoming caller screen, but there is no ring volume. When I check the volume of the ring tone on the phone after the call it is still set to a bit under half way.
I have the original Telstra ROM installed. haven't tried the new one yet.
Has anyone else had this issue and found a solution? I don't want to go to all of the effort to reinstall everything just to find out that the problem still occurs.
Thanks.
Same here!
I have the US version but have had this issue with both the stock US rom as well as the offical update they just posted.
A soft reset fixes it, but its totally random and is a major pain in the ass.
Any tips? Please help!
i have the same exact problem with my leo.
does someone have a resolution for this?
Me too!
Glad to know it's not just my HD2 that has this issue. I run the UK stock ROM and have suffered with this since I first got the phone! Most of the time it's fine, just every now and again goes quiet and I miss a call... I have even had the ringtone start loud, and then fade out. Would love to know if there is a fix for this......
Hi boys,
i've a similar issue with my Acer S200 with Manila ROM (OS version 5.2.23123, Manila version 2.5.20153712.0).
In a randomic way, suddenly the ringtone volume goes zero. I have usually ringtone+vibration, and vibration disappear too, together with ringtone....!
So with a new call, i can see the "incoming call" sceen but no sound and no vibration alert me...
With a soft reset i can solve, but i cannot understand what is the condition that triggers this problem....
I have a disimilar issue, the sound of the HTC HD2 phone call keypad is too loud, anyway to silence it?
it is not problem go to sound settings and close quiet ring on pickup
feyisetan said:
I have a disimilar issue, the sound of the HTC HD2 phone call keypad is too loud, anyway to silence it?
Click to expand...
Click to collapse
go to settings , personal , phone, keypad ,and close it
hoss_n2 said:
it is not problem go to sound settings and close quiet ring on pickup
Click to expand...
Click to collapse
not active.
The problem sound like a bug, instead.
andremales said:
not active.
The problem sound like a bug, instead.
Click to expand...
Click to collapse
mine don't have this
Erm.. try this
Settings > Sound & Display > look for "Single Volume" and turn it OFF.
whenever I press the volume key it has the option to switch between System & Ring Volume Level.
Hope it helps!
nothing helped.. performed a hard reset, now the problem is gone
No ring volume
try this: HKLM\Software\HTC\VolumeOverlay --> Set "Default Page" to 0
It works on my T-Mobile hd2
gutchin said:
try this: HKLM\Software\HTC\VolumeOverlay --> Set "Default Page" to 0
It works on my T-Mobile hd2
Click to expand...
Click to collapse
Thanks, will try that. hope it helps
i will, thanks!
.mp3 extention causes the problem.
try .wma format, it should solve the problem
best solition
What is the best solution for this problem?? Change the REG Key or. Change .mp3 to .wma???