i have downloaded the portuguese rom FROM FTP for the wizard ,it has 2 file radio.nba and os.nba,now when a try to write them to an sd card with ntrw.exe i get thi error,{could not lock xxx.nba---access is denied}
or is there any other way of installing this rom in my machine?
i also have noticed that everyone refers to files extencions like nb1 where this rom comes with nba.could someone please help thank you
Related
I am a newbie,can you kindly tell me how to flash rom by SD card in detail. because my bootloader is 5.17. i can't go back to 2002 rom use the xdatool.
thanks!
Hi mate,
plz check this thread ... let me know if you still have problems
note: XDAtools replaced XDrit tool ... so you can follow the same steps.
Thanks you very much, before I flashed the T-M 401.16 rom, I have backup my 2002 rom as .NB1 file, is it possible to copy it to my sd card directly, and then follow the steps?
can it work?
Yes, it should work ... but if your final target is WM2003 ROM, that would be an unnecessary step ... cook your WM2003 ROM from the kitchen as .nbf file and go ahead ... of course unless you need the wmodem.exe which is found only on PPC2002 ROMs
I have just installed the new Dopod 828 Chinese ROM on my i-mate JAM and created the 27M BigStorage on it.
The radio ROM is 1.13.
I have also extracted the Extended ROM for those interested.
ftp://xda:[email protected]/Uploads/Magician/Extended_ROM_Dopod_CHT_112_177/
There are quite a few interesting add-on softwares such as
- Skype For PocketPC
- Iconlab Intervision
- Polaris PWinner
- wLAN11b (for the Dopod "short" SD wifi card)
Talents,
Can you upload the CHT 1.12 Rom also? Thanks a lot
The full OS ROM was uploaded on 11 August by someone else.
ftp://xda:[email protected]/Magician/Dumped_ROMs/Dopod828V112OS.zip
opps. mislook it tim..
Talents said:
The full OS ROM was uploaded on 11 August by someone else.
ftp://xda:[email protected]/Magician/Dumped_ROMs/Dopod828V112OS.zip
Click to expand...
Click to collapse
Hi, Talents
Could you teach me how to install this rom file, after zip the rom is .bin format.
thanks you
thanks for info,it works fine with my 818!!
Please note that in Device Information, it will show Model to be PM10B instead of PM10A. This should cause no problem to installing almost all softwares, but Pocket Hack Master fails to recognise it.
My i-mate JAM has been upgraded to 128M RAM. So, the configuration is no different from Dopod 828.
Talents said:
Please note that in Device Information, it will show Model to be PM10B instead of PM10A. This should cause no problem to installing almost all softwares, but Pocket Hack Master fails to recognise it.
My i-mate JAM has been upgraded to 128M RAM. So, the configuration is no different from Dopod 828.
Click to expand...
Click to collapse
Hi Mate,
How to install this rom on the I-mate.
Thanks & Regards,
Use the standard SD method to install. You can find a lot of postings about the method in this forum.
As a short summary:
1. Use RomUpdate.exe to dump your orginal ROM to a 128M or 256M SD card.
2. Use ntrw.exe to read the ROM file on the SD card and save it to your hard disk.
3. Use HexEditor to replace the first 416 bytes of the downloaded ROM by the same of your original ROM.
4. (BigStorage option) Change the bytes 80 00 to b8 01 at locations 7e4a and 1fc232e.
5. Use ntrw.exe to write the modified ROM file to SD card.
6. Insert the SD card and set the ppc to bootloader mode.
The above may appear complicated if you are new to ROM upgrade procedures. Please search the forum for more detailed instructions before you attempt.
Compare with o2 mini ROM and 828 rom
have imporove quantity of carmera ?
thank You
Talents said:
Use the standard SD method to install. You can find a lot of postings about the method in this forum.
As a short summary:
1. Use RomUpdate.exe to dump your orginal ROM to a 128M or 256M SD card.
2. Use ntrw.exe to read the ROM file on the SD card and save it to your hard disk.
3. Use HexEditor to replace the first 416 bytes of the downloaded ROM by the same of your original ROM.
4. (BigStorage option) Change the bytes 80 00 to b8 01 at locations 7e4a and 1fc232e.
5. Use ntrw.exe to write the modified ROM file to SD card.
6. Insert the SD card and set the ppc to bootloader mode.
The above may appear complicated if you are new to ROM upgrade procedures. Please search the forum for more detailed instructions before you attempt.
Click to expand...
Click to collapse
Hello, Talents
Thanks a lot of for ur help, i had done the upgrade, thanks u very much.
Can this work on the Xda II mini?
Thank you!
adeliang said:
Can this work on the Xda II mini?
Thank you!
Click to expand...
Click to collapse
THX TOO
Talents said:
Use the standard SD method to install. You can find a lot of postings about the method in this forum.
As a short summary:
1. Use RomUpdate.exe to dump your orginal ROM to a 128M or 256M SD card.
2. Use ntrw.exe to read the ROM file on the SD card and save it to your hard disk.
3. Use HexEditor to replace the first 416 bytes of the downloaded ROM by the same of your original ROM.
4. (BigStorage option) Change the bytes 80 00 to b8 01 at locations 7e4a and 1fc232e.
5. Use ntrw.exe to write the modified ROM file to SD card.
6. Insert the SD card and set the ppc to bootloader mode.
The above may appear complicated if you are new to ROM upgrade procedures. Please search the forum for more detailed instructions before you attempt.
Click to expand...
Click to collapse
Why I got 11.03 MB of my Rom Storage when I Finished the rom upgrade?
And also my radio Version still in 1.11 ?
Thanks a lot! Although I haven't 828.
can I flash it to Eng O2Mini if no RAM upgrade (still 64MB) and how to do? Is there any improvement such as carmera and phone?
and how to use your .bin file? thank you.
Thanks, it's very useful
Still having trouble with BIN file
What do we do with the bin file? I downloaded the full OSDopod828 and have no idea what to do. I see nb1 files and then bin files. do we rename it or what? Can you guys help and clarify. Getting really frustrated.
What's the purpose of editting the 416bytes. If i just want the standard OS, did i have to back up anything at all? Why cant it be just as easy as the EXE which does everything for you...geeesh
C.
How to use BIN Files and SD upgrade?
Read a few posts which arent as clear for me at least. Maybe i'm just slow. I want to upgrade my dopod 828 back to CHT. Any easy way to do it next to the SD method which doesnt work with me. I didnt back up my CHT before i went for the WWE. What do i do with the bin file. Rename it or edit it what? Need desparate help here guys.
Sorry for multiple posts.
Hi!
Can anybody grab own English ROM, zip'ed it and send to me?
How to do it describes here:
Setup
- rename 'grab_it_xx.exe' to 'autorun.exe'
- create folder '2577' on your (better empty) Mini-SD card (You need card more then 128 Mb)
- copy 'autorun.exe' to this folder
That's it for the "setup"
Usage
Now every time, when you insert this card into PPC it will grab the ROM image and save it into root of the card as 'dump.bin'.
On my French device this tool asks me the confirmation. Once done, it will beep the default sound. After release card may be error message "Can't create card" - ignore it. Message boxes are only shown in case of error.
IMPORTANT NOTE (thanx MDAIIIuser)
YOU MUST NOT put it back into another device!!!
YOU MUST read the SD with card reader on your desktop PC.
Otherwise, you will rewrite the dump with your own ROM!!!!
This ROM dump file can be then further processed and converted to flashable formats. It is very good for compress.
Tool is here:http://forum.xda-developers.com/atta...4&d=1119937614
BR varix
[email protected]
same for me please
thanks and regards
mrking
Problem with my hw6915
Hi. I have hw6915 and i wont change rom from deutch to english. I have english_dupm_file.bin and i have question how I install this in my PPC??
tested! english rom
commanddos said:
I have successfully changed OS language follow by steps described by Drahtman
BTW Thank you man! You are the king!
I would also thank wikidorg and many of you people for your shared knowledge.
Conclusion is so simple and so funny at the same time. Before you start, always RTFM
To get process more easy and lazy I have added files I used to change the language:
CEOS.rar english OS (the real one not the fake!)
aWizard_1.2.zip - contain everything what Drahtman described
SpbPocketPlus4_setup.exe
You can reach this compressed packet over here.
http://rapidshare.com/files/76603189/ENG_CEOS.rar.html
Once you have it just follow by Drahtman steps.
Good Luck
Commanddos
Click to expand...
Click to collapse
Here you are but in future search the forum first for Drahtman instructions
ROM
Fully working!!
Please THERE IS NO NOTIFICATION of flashing ROM - DO NOT UNPLUG THE ipaq !!
Flashing program shows some numbers when it starts to flash and that's all.. After aprox 18minutes it's done with skip to the main flash menu and on ipaq there is NO SIGN of been flash..
Make HR and that's all ..
French, Deutch and all the others are gone..
Version ENGLISH 1.21
(PS: does exist any new one? )
ENG ROM
Pleas send me english rom for iPAQ 6915. Thanx my mail is [email protected]
MrKing said:
same for me please
thanks and regards
mrking
Click to expand...
Click to collapse
nbh english
http://rapidshare.com/files/279924399/englishOS.rar.html
English nbh
varix said:
Hi!
Can anybody grab own English ROM, zip'ed it and send to me?
How to do it describes here:
Setup
- rename 'grab_it_xx.exe' to 'autorun.exe'
- create folder '2577' on your (better empty) Mini-SD card (You need card more then 128 Mb)
- copy 'autorun.exe' to this folder
That's it for the "setup"
Usage
Now every time, when you insert this card into PPC it will grab the ROM image and save it into root of the card as 'dump.bin'.
On my French device this tool asks me the confirmation. Once done, it will beep the default sound. After release card may be error message "Can't create card" - ignore it. Message boxes are only shown in case of error.
IMPORTANT NOTE (thanx MDAIIIuser)
YOU MUST NOT put it back into another device!!!
YOU MUST read the SD with card reader on your desktop PC.
Otherwise, you will rewrite the dump with your own ROM!!!!
This ROM dump file can be then further processed and converted to flashable formats. It is very good for compress.
Tool is here:http://forum.xda-developers.com/atta...4&d=1119937614
BR varix
[email protected]
Click to expand...
Click to collapse
link die! ineed tool and guide,help mehp6915 "no gsm")
[email protected]
download no longer available
this file has been removed from server/
hello friends.
i have qtek1010 and i was upgrade wm2002 to wm2003 final,but i want wm2003se.
i try to upgrade my pda,its run error,it's say "cannot execute the remote communication program.please make sure that usb/serial cable is properly connected"
my rom version 4.02.04ENG
rom date 8/24/05
radio version 3.25.00
please somebody help me,i want wm2003se,what i do now?thanks for all and sorry my english.
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
sorry friends but i don't understand somethings in this page http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
for example:
"xda os image tool" is want "source" and "destination"..
my source is "installer.exe" from the http://www.romkitchen.de/ ,it isn't .nb1
which m i choosen?wm2003final(there is nb.1) or wm2003se(there isn't nb.1 but i want this version)
and "destination section" is wanted .nb1 , my sd card there isn't anyone.
what m i do?m i download the wm2003final.cb1 and its copy to sd card??
poffff,what m i do now?
thank you again.
if you rename the exe to zip you can copy out the nb1 or nbf file or what ever
one can only use the tool to get the rom to the sd card windows copy dont work
i flashed many times using this guide to the step
Hello,
i want to Extract Some Rom Files From WM2003 Rom
i tried alot but i can't do anything
please i need Help, it's Very important
The required [wm2003/5/6];
Minumum 64 mb SD card.TestWM5.exe send SD Card.Run prog. hooooooop dump files
Also you can use my ROM Extractor to extract some files.
Thanks FOR All Posts