Related
Hi,
Ok after the breakthrough regarding the ROM updates for QTEK 1010 and it was first revealed here on xda-develpers.com we have some new options in the QTEK now one of them is the WM.
Did anyone manage to use the Wireless Modem via IRDA because its not working the first thing is that the computer is seeing the device on infrared but not as a modem and i dont have an *.inf file to indentify it. If anyone managed to use his QTEK or any XDA via infrared to connect his laptop to the internet using GPRS plz explain how.
thanks
to irda on win2k/xp
visit http://www.ircomm2k.de
Install software at own risk, but this exposes a permanent COM port using IrDA. Also nukes Wireless Link in the process.
Setup a manual modem, select the COM port from above, presto!
Ummm its a good idea but i am not sure if this will work on Windows XP... what do you think?
it does
it does, but as with all things apply with care
Tried it
I tried this a long time ago, IRCOMM2k works on XP but the problem is that i couldn't figure out how to setup a IR generic Modem working on that port.
Yes please, this is a good article,
I installed the ircomm2k on my XP, but how to configure the connection from my laptop to connect to the internet via my XDA PDA as an external modem?
to setup xda as a modem
1. Install Ircomm. note which com port is assigned as permanent.
2. Add new modem: standard 33600
3. Select com port from item 1 as the com port of choice
4. Edit modem profile in devices settings, in Extra Initialisation Commands add AT+CGDCONT=1,"IP","apn name"
5. VERY IMPORTANT: set flow control to OFF
6. Set port speed to 115200 ONLY
Set up a Mobile Web net connection as per your operator
Select your above modem
Align xda with irda port; select start on Wmodem app
Double click Mobile Web connection.
Surf. It's OK but not as fast as a GPRS card.
OR you can wait for O2 to eventually post some instructions...
Thank you very much for your feedback
I did all what you asked me to do, but its not working it gave me an error message:
Error 692: There was a hardware failure in the modem (or other connecting device).
I replaced AT+CGDCONT=1,"IP","apn name" BY AT+CGDCONT=1,"IP","apn01" same as Im using in my PDA. Am I right?
Something I didn't understand in your reply:
(Set up a Mobile Web net connection), you mean a normal dial-up connection?
One more thing, what do you mean by (select start on Wmodem app)?
Do I have to do anything in my PDA before I connect from my laptop? or do I have to do anything in my PDA configuration or connections settings?
Please help me, I want to use the Gprs on my laptop, no need to pay for 2 services, one for the PDA and other for my laptop
Best regards, Ali Alsaffar [email protected]
"select start on Wmodem app" - this means go into the Wireless Modem application on the xda, select IrDA (if thats now you are connecting) and then tap the Start button.
When you've done that, go the the DUN connection on laptop and connect as you normally do.
Unfortunatly I dont have "Wireless Modem application" on my XDA from where I can get it?
I thought the command was:
AT+CGDCONT=1,"IP","apn name","",0,0
I don't know about the command but what Im sure about it is that wModem application is mandatory, so from where I can get it?
Re: to irda on win2k/xp
guest said:
visit http://www.ircomm2k.de
Install software at own risk, but this exposes a permanent COM port using IrDA. Also nukes Wireless Link in the process.
Setup a manual modem, select the COM port from above, presto!
Click to expand...
Click to collapse
HI. I HAVE AN OLDISH LAPTOP RUNNING WIN ME. WILL IRCOMM2K WORK ON ME OR IS IT INTENDED (AS NAMED) FOR WIN 2K AND XP ONLY?
From: Helpdesk (source O2) Sent: 30 May 2003 13:54
Subject: RE: wireless modem
Hi
The wireless modem will be available in the next ROM update from the xda team. I understand that this will be released in the next couple weeks - they are in the final stages of testing.
We will highlight the new ROM on our homepage with a link to the downloadable files.
regards
source O2
Re: to irda on win2k/xp
Anonymous said:
guest said:
visit http://www.ircomm2k.de
Install software at own risk, but this exposes a permanent COM port using IrDA. Also nukes Wireless Link in the process.
Setup a manual modem, select the COM port from above, presto!
Click to expand...
Click to collapse
HI. I HAVE AN OLDISH LAPTOP RUNNING WIN ME. WILL IRCOMM2K WORK ON ME OR IS IT INTENDED (AS NAMED) FOR WIN 2K AND XP ONLY?
Click to expand...
Click to collapse
Hmm... really good question. ME is an update to 98 as I recall, but a clunky upgrade.
Way to check: Setup a new modem. When it asks which COM port you wish to use, if you can select Virtual Infrared COM port then it should work fine.
Get the instructions at www.o2.co.uk/xda on Help and Support.
Anyone know what the T-Mobile USA network connections for using WModem are?
For UK O2 they are:
Primary DNS - 193.113.200.200
Alternate DNS - 193.113.200.201
User name - O2Web
Password - password
Has anyone used wmodem in the US with T-Mobile as a service provider?
Thanks,
JP
Qtek as wireless modem
I also have oldish ME Laptop computer. I did exactly as described on O2 support site. It does not work. The modem on laptop immediately disconnects saying it's not responding properly.
I have tried several cooked versions of the 4..00.16 Eng T-Moble and the 4.00.11 ENG WM2003 roms and niether one installs the WModem app. Any ideas why?
I have a T-Mobile version of the PPC, radio stack 6.24
WM with old laptop computer
It worked for me. I could connect my oldish ME notebook computer to internet over gprs using WM in xda. I used the extra string from o2 and just changed the access point name.
It goes as this:
AT+CGDCONT=1,"IP","apn"
It works, but the WM just stops responding the moment you disconnect the connection from PC. The PC waits and waits for the confirmation and then hangs up saying no reponse. But as long as you are connected it works very well.
I have a XDA II with 2k3 which is getting connected to GPRS Internet. I have also configured my HTC modem in XP.
Could someone help me with the USB modem dialer so that I can get onto Internet from my laptop thru HTC modem GPRS? It should ask for username, password and APN.
Thanks in advance
tushar
Sorry team.
I want a dialer...forgot to mention
tushar
Can i know
Hello I`m From Indonessian.... i`m interes this topic.... can i know where can i download the driver and program to make my pda can use to be a modem on my computer..
hi
steps to use the xda2 as usb modem to laptop
1 close all running program...make sure active sync is not running on the pda
2. go to wireless modem option in program
3. in connection type choose usb and then press start at the bottom of the screen
3. now connect the serial cable to usb
4, u shd hear a notification sound...bingo now click on the dial up
assuming tat u have already configured the htc modem as u have said..this shd work
Dear all,
I got a document from http://www.ppcw.net (very old though 16/01/04) states that I need to use USBModem_Dialer.exe for dialing GPRS. Tried finding many places but failed.
Please help me to get it.
cheers
tushar
hi tussar
i myself have a xda2 n i use it as a usb modem try doing it as mentioned it shd work fine,,no need for anything else
ankesh
pune
Hi Ankesh,
U seem to be next door as I am also from Pune. Please call me on 30915259 or lemme know your no. so that I can call u.
cheers
tushar
...
For those,who want to connect via BT stack. Yes it is not so clear about the APN,but this will connect via your default internet connection,that you're using on the go(The APN is described there):
1.Pair your Himalaya with a PC.
2.Start the Wireless Modem app.and choose Bluetooth. Then tap to Start button. Your device must be in Discoverable mode!
3.Now in computer click to the 'My Bluetooth Places' icon on the desktop.
4.Open the connected Himalaya and click to the SSA service.
5.Now the connection window will appeared. Choose the *99# as a dialed number and click to Dial.
That's it.
Where can I get an idiots guide to connecting my exec to my laptop and using it as a modem to connect to 02 via 3g or GPRS and either by the USB port or by a bluetooth connection.
Thanks!
It's AWESOMELY simple, and works so well that I'm considering ditching my adsl:
1- On PPC fire up modem proggie and press start
2- Now unplug and plug back into USB of PC
3- PC recognises new device
4- On PC, initiate your dial-up connection that dials *99#
The first time you do this, there are some extra steps:
2a- before step 3 i THINK you need to guide PC to the modem driver you downloaded from clubimate of CD
3b- First time you need to create the dial-up connection.
For both of the above new steps, there is a guide on clubimate "using your imate as a USB modem" or something like that. Once you've got it working once, the repeat process is SO simple. Just remember to start the modem on your PPC, THEN unplug and plug in the USB connector. Reason is that your PC sees an iMate when not in modem mode, but it sees a modem when in modem mode. You have to tell your PC to re-look and re-recognise.
A side step; you may want to tell activesync to ignore the USB port. It's not actually necessary, but if u don't do it when u unplug and replug then AS jumps up and connects. SO what.
Great! Thanks for the prompt response. I will try this when I get home from work.
Do i then need to setup a dial up connection and if so what phone number do I use for 02 3G and what settings or is there a download that will do this automatically for me?
Cheers,
Roger
Doh! As I have an o2 exec and not an imate jasjar i cant use clubimate site for downloads etc is there an alternative?
trying to attach - but big file
number is always *99#
OK my PC recognises my 02 exec as a modem when I plug it in. I set up a new dial up connection with the phone number as *99# and left password and username blank.
When I access a webpage via this connection it says dialling... for a bout 2 mins then syas Unable to establish a connection. What am I doing wrong?
Not able to open the above instructions - so it might say leave username blank etc.. as its already in the xda
But could try setting pc connection to read
( for 02 sim)
Username: mobileweb
Password: password
thats how I used my 7600 to connect
For O2 UK -
Install USB modem driver from CD.
Setup a standard DUN connection using HTC modem installed.
Username: web (can be anything but not blank)
Password: web (can be anything but not blank)
Dial up number: *99#
In Progs > Wireless Modem > Tools > set APN as: mobile.o2.co.uk
Thankyou!
That final reply sorted out the last thing that i needed to setup. It is working well now.
Thanks to all who responded.
just a warning - obviously once using as a modem on a laptop , its easy to get thro' more usage ( which can be expensive if you don't have a high/ unlimited tariff)
Has anyone else had this problem.
I am trying to set up wireless modem working with my laptop and my M5000. I've followed instructions by disabling activsync and incoming beams but I can not even get as far as installing drivers when I hit "START" on wmodem I get "COM OPEN ERROR" and it stops me getting any further.
Does anyone have any ideas?
Hey i had this problem in the beginning also.
don't know for shure but try first to disable GPRS and WLAN.
1. disable USB connection in active sync on your computer.
2. start USB modem app and press start
3. connect usb cable
4. install drivers
5. start USB_modem.exe to connect. (no username or password needed)
Something has changed now. I have stoped my GPS bluetooth from using serial port (although it wasn't running at the time). Now I can install drivers and I've set up modem as per instructions in earlier thread. Now I start WModem and plug USB in with no active sync and nothing happens. window says connecting but nothing actually connects and status does'nt change. latter this connection after about 3 mins will time out with communication error 777.
Any more ideas would be appreciated.
sorry dude can't help you out. don't know what went wrong. Try to disconnect everything and try again.
Using GPRS/EDGE as a Modem to access internet with Desktop/ Notebook Computer
When I need to connect my Notebook to the internet, I always prefer Wifi or Broadband line. If no such medium to connect internet, I will use PDA and USB cable. First of all, you need a modem driver for Windows 2000/XP and a simple dial-up utility. Both files are available here: USB Modem. It is a zip file and has 2 files, (1) USBMDM.INF, (2) USBModem_Dialer.exe. Just download them and unpack to you Desktop/Notebook. Second, you must set the partnership to your Desktop/Notebook first before proceed following set up.
Go to program and run “Modem Link” and set the connection type. In this case, choose USB and APN and tap on the Activate button (In my example, APN is Peoples.net). The device has switched to the modem mode and is ready to connect.
Photo 1 -3
At the moment you connect the PDA to a desktop or notebook over USB cable, the computer will connect the PDA. Let the system work until you see the Photo 4, select third options as red arrow, click Next.
In the next dialogue Photo 5, you can see that the new device is called HTC USB Modem. Even though the system offers to do this for you, you'd better select the second option as red arrow to be able to select location of the driver manually.
In the next dialogue Photo 6, choose the folder where you have unpacked USBMDM.INF from there archive and click Next to continue. The system will be working and configuring for a while. If no problems occur, you have installed the modem successfully.
Go to your desktop/notebook, double click USBModem_Dialer.exe that is part of the zip file you had previously unpacked. (Photo 7) As you see the APN must same as PDA one. (In my example, APN is Peoples.net) Click Dial.
Done. You can surf internet with you desktop/notebook.
Important : The key of this setting is that the APN for PDA and Notebook/Desktop must be same. The name of APN which you can ask the services provider.
Please note that all photo is not mine but I tested on my 818pro & Wizard and Notebook and work fine
Great info! I use my qtek9100 and T-mobileGPRS every day for this purpose. Only thing that is different is that I use the standard Dailup Networking of XP. You don't need to specify a APN but you have to fill in a number to Dial: *99#
I tried the above on my O2 XDA Atom and it didnt work, first in the PDA I was unable to select th APN (the dropdown list was empty). second thing is on my laptop when i tried to select the USBMDM.INF the laptop rejected it as unfit for the hardware.
help.
Hi all.
I'm not able to enter the APN number in my Dopod 818 Pro too. Any ideas how?
this is what i did on my O2 mini:
i. Installed USB Modem dialer on my notebook.
ii. Before connecting the PDA: Disable allow USB and allow Network checkboxes on Microsoft ActiveSync Connection Setting.
iii. Go to Task Manager on the Notebook. Disable all WCExxx processes.
iv. Create Dialup Connection as you create for normal dial up phone connection: No username or password: Dial up no *99#
v. In your PDA, Open Wireless Modem: Click at Start.
vi. Connect your PDA to notebook using USB cable.
vii. Changed modem properties at dial up connection to HTC modem.
viii. Proceed with dial up.
so far it works for me...
pls help
the device already switched to modem mode and connect to decktop,
but the desktop cannot detect to 838pro.nothing detect new device.
and how to setting the partnership to your Desktop/Notebook first .
thankyou very much
fix apn
mcmug said:
Hi all.
I'm not able to enter the APN number in my Dopod 818 Pro too. Any ideas how?
Click to expand...
Click to collapse
hi,
u will not be able to change apn anyways.u can only see it.
1st u should setup to access gprs internet on your ppc. this u do by going to
start>settings>connections>add a new modem connection, under select modem, cellular line gprs, next, now enter access point name as given by ur gprs service provider [mine is airtelgprs.com, gprs provider being airtel bengalooru] ,next, username and password as given by ur gprs provider [mine is leave both blank] , finish.
now go to modem link in start, programs, u can see ur apn as u entered.
if u still cannot see, go to start,settings, connections, connections, advanced, select networks, under programs that connect to internet, select the name of gprs u entered in above steps.
now u can goback and see in modem link.
now without activating modem link, browse internet in ppc only to c if all is right with ur gprs. if sucessful, then close pocket ie, activate modem link, connect to desktop or laptop via usb cable, use usb modem dialer or create other connection with no. as *99#[which is better, since in usb modem dialer, u cannot save apn, have to retype everytime]
any problemo in setting up gprs connection in ppc , contact ur gprs provider for settings. make sure gprs works in ppc b4 u setup to work in desktop.
alternate methods to use wizard as modem would be to use bluetooth DUN, or try pdanet 1.7
I don't find any variations in speed in any methods, all r as gud or as bad.
after hard reset,i can connect to devicve.
when dial to connet to internet ,snow "remote access error 797"
pls help
thanks
my PPC (XDA Stealth) is already in GPRS/Modem mode. when i connect it to my laptop using the sync cable, my laptop automatically installed its drivers. it didn't ask me to specify which driver to install. when i run HTC USB Modem, it says No USB Modem.
hi..I hav everything installed properly n it was workin earlier n now when I try to dial up the connection, it says hardware failure of modem...when tried pdanet it always says modem busy...pls help...
any way to do this with a G4 ibook?
EDIT: Nevermind... I found it... it is working great with my 6945 iPAQ via Bluetooth, for free! If someone wants to check this, look over Here
Sorry i posted to the wrong thread.
WM6 HTC Tytn usb modem settings
Hi, in WM6 there is no Wireless modem icon and settings.
Modem is HTC USB Sync, not USB modem.
What can I do?
Thanks
Start internet sharing on the tytn and chose usb and then connect to your pc with usb cabel and thats it
sas90850 said:
... new device is called HTC USB Modem. Even though the system offers to do this for you, you'd better select the second option as red arrow to be able to select location of the driver manually.
In the next dialogue Photo 6, choose the folder where you have unpacked USBMDM.INF from there archive and click Next to continue. The system will be working and configuring for a while. If no problems occur, you have installed the modem successfully.
Click to expand...
Click to collapse
My XDA Atom is detected as a 'Windows USB Modem' rather than 'HTC USB modem' and the driver in the zip is not compatible with my device. Can anyone place the link to the driver file for XDA atom into this topic?
Is there any posibility to connect using HSDPA?
Because the subject specifically mentioned GPRS/EDGE ...
Thanks
I was searching for this solution some hours now...
Great fix!
Great!
Thanx!
Suberly simple and works perfectly!
Regards
wm6 sharing not as a modem, it sharing as a sharing device. i alos finding the driver.. but if you have install active sync b4, i can auto find a driver. but the driver how can i capture out? becuase if i connect to other notebook, it also ask me to install the driver
Still having trouble connecting
AndreyC said:
My XDA Atom is detected as a 'Windows USB Modem' rather than 'HTC USB modem' and the driver in the zip is not compatible with my device. Can anyone place the link to the driver file for XDA atom into this topic?
Click to expand...
Click to collapse
I have an AT&T/Cingular 8525
I'm still having trouble. I connect the USB cable (after selecting connect onthe Internet Sharing). When I go through the process and select the .inf file, my PC (running WinXP) says that the "file contains no info for the device". What's going on with that?
I've searched all over the net and downloaded the USBMDM.INF file from 100 different places (thinking they were just corrupt files) but to no avail.
Someone help, please!