Upgrading Radio ROM = Hard Reset? - PDA2, XDA IIi, 2020i Software Upgrading

Hi
If I just upgrade my 1.03 Radio ROM to 1.04, and not the CE ROM or Ext ROM, does my device still hard reset.
Thanks

Given to update the device it needs to go into bootloader mode the answer is yes.

On a magician you follow the same process as a full-upgrade => hard-reset.
M

Related

Prophet IPL/SPL 3.08 won't Downgrade

Hello everyone,
I am here to ask for some help from the experts.
I already read a lot in this forum but could not find any working solution.
My Prophet was upgraded to IPL/SPL 3.08 and won't turn on unless I connect +5v pn pin 1 and ground on pin 6. Doing this I can go to tricolor screen.
I tried to flash IPL/SPL 2.20 but after the reboots it comes back with IPL/SPL 3.08.
Any ideas how to downgrade the IPL/SPL ?
Best regards to you all and a warm thank you for the quality post in this forum.
Adias
Downgrade IPL/SPL 3.08 sorted
I sorted this in a moment of clarity.
Steps:
1. Got a working WM5 rom into the Prophet
2. Connected ActiveSync
3. Got prophet SOFT SPL into the phone device root.
4. Run SOFT SPL. Got a white Screen (Witch is normal. This is the SSPL bootloader screen)
5. Flashed IPL 2.20... OK
6. Flashed HARDSPL... OK (I supose SPL 2.20 can also be flashed)
Thevice unbricked and working fine.
congrats and well done
its even more satisfying when you solve it your self yes?
Can you please provide links for the SOFT SPL and HARDSPL files? Thanks men
asrdias said:
I sorted this in a moment of clarity.
Steps:
1. Got a working WM5 rom into the Prophet
2. Connected ActiveSync
3. Got prophet SOFT SPL into the phone device root.
4. Run SOFT SPL. Got a white Screen (Witch is normal. This is the SSPL bootloader screen)
5. Flashed IPL 2.20... OK
6. Flashed HARDSPL... OK (I supose SPL 2.20 can also be flashed)
Thevice unbricked and working fine.
Click to expand...
Click to collapse
Question hard spl
I already have de SPL 2.26 before I had 3.08. the question is, Do I have to run the hard slp? Thanks.

Display problem on my touch hd

Since then voila I install a rom for the first time I have a bug here is a picture to help you understand
It is an image that I have requests in the forum but am in all its images
More information please!
We need more information!
Are you using SPL or USPL?
What ROM did you flash?
Did you perform a hard reset after flashing the ROM?
If you're not sure about the above then read this for SPL:
http://forum.xda-developers.com/showthread.php?t=431217
This for USPL:
http://forum.xda-developers.com/showthread.php?t=462347
And this is an all round overview:
http://forum.xda-developers.com/showthread.php?t=505377
G
Edit: And this post makes me a senior member - woohoo!
Here is how I do I install rom always full of the same problem
Olinex I install 1.56 and then the official 1.56 rom 2009
The picture you supply isn't from the official 1.56 HTC ROM because it is running Windows mobile 6.5 (I can tell from the user interface). The official ROM uses Windows Mobile 6.1.
I think you need to make sure that you flashed the correct ROM and then flash the device again. After doing this make sure you hard reset afterwards at least once, preferably twice by holding down both volume buttons while powering the device on.
Also unless you have a CID locked phone that is branded eg. Orange, you shouldn't have to use Olinex HSPL and can download the official ROM from here:
http://www.htc.com/uk/SupportDownload.aspx?p_id=179&cat=2&dl_id=533
In any case you should confirm which SPL you have by holding down the lower volume button while booting (it will tell you either SPL or HSPL along with version number).
Let us know how you get on...
G
HSPL 156 OliNex and htc is a factory not orange or other
Okay, it sounds like you have successfully installed HSPL, but now you need to try flashing the ROM again (it appears to be the ROM that is causing the graphic corruption in your picture).
Make sure you perform two hard resets after flashing and hopefully this should solve your problem...
Cheers,
G
P.S. Make sure you back everything up prior to re-flashing as you will lose everything in phone memory (SD card should not be affected, but my advise would be to remove it anyway until you have re-flashed).

Urgent help: HTS P3300 stuck up

Dear All,
Please urgent help required.
my HTC P3300 (Artemis) stuck up when i was trying to start it up. when i use to turn my cell on, i goes to the starting screen shows the following numbers and then stuck up.
IPL 3.07.0001
SPL 3.07.0000
GSM 02.69.90
OS 3.7.0.0
the screen does not move after that. i tried soft reset through the reset button but result is the same.
i also tried hard reset and when i puch the green phone button to proceed, a message come "FORMAT FAILED" and the phone stucks up.
i am quite a lot of problems since i have upgraded to WM6 from WM5 last week.
i am quite sucked with this problem. not been able to use my set since yesterday.
please also note that my HTC was not syncing with my PC since i have upgraded to WM6.
PLEASE HELP URGENTLY.
Nomi
You can tried to reload your last ROM (WM6), for this :
-Start in bootloader mode ("Voice Command" + "Power" + Reset with Stylus)
-Start a new upgrade Rom (With the last ROM)
It's works ?
If yes, you can upgrade Radio and SPL.
i did that but the flash process stopped at 3% (i think CID locking problem). i tried USPL but the process could not be done. i also dont have my previous ROM but i noted the previous numbers which are
IPL 1.14.0001
SPL 1.14.0000
GSM 2.67.90
OS 1.14.0.0
tell me what to do now??
i dont have my previous ROM. nor i know what were the factory provided ROM
please help
You can :
-Flash your original ROM (Operator and langage)
-USPL and 1.11.cmon (verify that your phone is USPL before another action)
-Upgrade your new ROM.
i dont have the original ROM.
the phone is stuck at boot page. USPL not working.
what to do now
You must to download a rom from the Same Operator and same location.

Pharos 3470 Revive

Hi! i open this Thread beacause i search for answers and i don't find them...
First thing, i will say what i done and where am i with Ruu.
I hard spl with 1.11 from PDA all soft working after then i flash it with 5 software and all have the same problem. Windows mobile image apears but remains in it... can't go forward.
Second i download RUU_Pharos_HTC_WWE-ME_1.11.456.1_4.1.13.59_03.15.90_BLUE_Ship and others original firmwares, but now it remains on Smart Mobility image and say
ONBL 2.05.0000
SPL 2.05.0000
GSM 03.37.90
OS 2.5.0.0
and i can't flash with any soft upgrade, because it work's 2% and restart, and RUU tool say check your update tool...Hard spl don't work anymore
just remains at this step..nothing happed...
Can i revive my Pharos? or i can go to trash and drop him there? (
Sorry for my english!
same problem.
please help
Hi,
You installed a ROM with a packaged SPL 2.x (2.05.0000 in your case), but AFAIK there isn't any patch for SPL versions higher than 1.11, so you can't flash anymore with any ROM. You're locked with your last ROM. You can try to ask for a patch, but i think that's not easy to obten a valid answer. You can also try to make this patch, but... good luck
can i used other htc unit hardspl?

HTC ELF night mare of smart mobility

Hi All,
I need your help in urgent!!!
My ELF GSM infor:
- DeviceID: ELF011000
- CID : DOPOD701
My ELF worked fine before I tried to upgrade its IPL from 1.11.0002 to 2.26.0002, then this problem occur. Because a WM 6.1 ROM requires to have IPL 2.27.0002 and SPL 2.28.0000 so I kept continue upgrade the IPL/SPL to 2.27.0002 and 2.28.0000.
I tried to flash my ELF, from bootloader mode, with these ROMs:
- RUU_Elf_DOPOD_chs_1.11.706.1B, this ROM I got from a China forum, it is my device original ROM
- RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93.90_Ship.exe
- RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97.90_BLUE_Ship.exe
- RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe
- ESSential_4_5
- Onyx_jr_4_4_2_Light
They are all 100% successfull but the IPL/SPL unchanged (2.27.0002 and 2.28.0000) and the device still loop at smart mobility, can not jump into OS.
I did try to use unbricker ROM and goldcard (with original ROM or unbricker ROM inside) but the ELF still stuck at smart mobility...
Please give me your advices, what should I do (except buying a new phone)?
Thanks for your time!
Flash your Official ROM
rockerboom said:
Hi All,
I need your help in urgent!!!
My ELF GSM infor:
- DeviceID: ELF011000
- CID : DOPOD701
My ELF worked fine before I tried to upgrade its IPL from 1.11.0002 to 2.26.0002, then this problem occur. Because a WM 6.1 ROM requires to have IPL 2.27.0002 and SPL 2.28.0000 so I kept continue upgrade the IPL/SPL to 2.27.0002 and 2.28.0000.
I tried to flash my ELF, from bootloader mode, with these ROMs:
- RUU_Elf_DOPOD_chs_1.11.706.1B, this ROM I got from a China forum, it is my device original ROM
- RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93.90_Ship.exe
- RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97.90_BLUE_Ship.exe
- RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe
- ESSential_4_5
- Onyx_jr_4_4_2_Light
They are all 100% successfull but the IPL/SPL unchanged (2.27.0002 and 2.28.0000) and the device still loop at smart mobility, can not jump into OS.
I did try to use unbricker ROM and goldcard (with original ROM or unbricker ROM inside) but the ELF still stuck at smart mobility...
Please give me your advices, what should I do (except buying a new phone)?
Thanks for your time!
Click to expand...
Click to collapse
First try to flash your official ROM and then try to flash ipl/spl again follow step by step. After that try to flash customize ROM again. Hope you will success.
Dear ELF341,
Thanks for your advice!
When I flash the original ROM, 100% successful, then my ELF loop at the China Mobile screen then reset... I don't have the IPL1.11.0002 and SPL 1.11.0000, the lowest I have is IPL1.17.0002 and SPL1.17.0000. I tried to flash back the 1.17 version, after 100% successful, enter bootloader, the IPL 2.27.0002 and SPL 2.28.0000 still remain!?
Please tell me how to do!
Thanks for your time!
rockerboom said:
Dear ELF341,
Thanks for your advice!
When I flash the original ROM, 100% successful, then my ELF loop at the China Mobile screen then reset... I don't have the IPL1.11.0002 and SPL 1.11.0000, the lowest I have is IPL1.17.0002 and SPL1.17.0000. I tried to flash back the 1.17 version, after 100% successful, enter bootloader, the IPL 2.27.0002 and SPL 2.28.0000 still remain!?
Please tell me how to do!
Thanks for your time!
Click to expand...
Click to collapse
After flash back to official ROM , enter bootloader and check ipl/spl first.
Normally, if you flash ipl/spl (not hard spl) when you flash back to the official ROM the ipl/spl will back to original. S/R - wait for boot to WM if OK then do H/R again. And flash ipl/spl again - enter bootloader and check ipl/spl again (changed or not) if OK after that I recommended you flash Onyx ROM. I used it for long time and no trouble.
Hope, it's can help you.
Dear ELF341,
Thanks for your reply!
After 100% successful loading the original ROM, my ELF restart and loop at the China Mobile screen... When I enter bootloader, the IPL/SPL still remain as IPL 2.27.0002 SPL 2.28.0000
I understand that when we flash the original ROM, the IPL/SPL will roll back to its original version, but mine is so strange?! Does this mean that:
- My ELF's flash ROM is fail or locked at the region for IPL/SPL so that whatever ROM I flash (these ROM contain ILP,SPL,OS,radio..) the IPL/SPL unchaged?
- The original ROM is actually not match to my ELF?? But I already flashed the other ship WWE ROM and also the unbricker ROM, they all loop at smart mobility...
Please help me!
rockerboom said:
Dear ELF341,
Thanks for your reply!
After 100% successful loading the original ROM, my ELF restart and loop at the China Mobile screen... When I enter bootloader, the IPL/SPL still remain as IPL 2.27.0002 SPL 2.28.0000
I understand that when we flash the original ROM, the IPL/SPL will roll back to its original version, but mine is so strange?! Does this mean that:
- My ELF's flash ROM is fail or locked at the region for IPL/SPL so that whatever ROM I flash (these ROM contain ILP,SPL,OS,radio..) the IPL/SPL unchaged?
- The original ROM is actually not match to my ELF?? But I already flashed the other ship WWE ROM and also the unbricker ROM, they all loop at smart mobility...
Please help me!
Click to expand...
Click to collapse
How you flashed ROM ? By RUU (PC) or used microSD card. I recommened you to use RUU (PC) follow step by step. Sometime when I used microSD card to flashed ROM , it's successful but cannot boot, after that I flashed Official ROM by RUU and unlocked the phone again it's back to normal. And your official ROM, you must check with your operator or distributor because in different zone it's use diferent ROM.
Dear ELF341,
I only can flash via PC RUU, I don't succeed in SD card way:
- When I copy the *.nbh file into SD card, then enter bootloader, I just can see the checking SD card content string displayed very fast, then the tri color screen.
- When I create a goldcard and copy *nbh file into it, enter bootloader, the brick ask for 'upgrading SD image', I press power button for it to start download but it hang at 'downloading from SD' with a blank download status bar.
Actually I bought this ELF from a man on my local site, so I don't know where is the distributor...I used the mtty and usb monitor to check for my device infor, then search internet for my original ROM, I only can find in a China forum that match my deviceID/CID....
For my case, I really don't know why I can not change its IPL/SPL version? Please help me!!!
Thanks for your time!
well u hav to rename the nbh file to ELF0IMG for SD card flashing to work.

Categories

Resources