Hi Guys
This is my very first post here, i had found your information and suggestion very useful up until now.
I just bought the GPS software navman today and just finished installing it, all went well, however when i try connecting it to the correct port i couldnt.
The problem is the Dopod 838 i have bluetooth setting only showing com6 and com7, no other com port there. My navman software have everything other com port but NO com6 and com7!!
I have trying searchng the forum but cant find any step by step guide to how to change the port on my 838.
Pleaes help urgently
Thank you in advance
Have you paired the gps and wizard? And assigned an outgoing com port (COM6) to the GPS? Remember to NOT check the secure connection checkbox. Then turn the wizard off and on again (or wait at least 15 seconds and soft reset). Now your sofware should see the com port. If needed, create an incoport on COM7.
i have the same problem with destinator pn.
i try to pair with holux gpslim236 and it says the com port could not be created please check your settings and try again
HI Tomasz
Thank you so much for responding.
Yes i have paired the 838 with my reciever Holux Slim 236. All pairing is working the problem is with my navman software, i have to set the com port to match my 838 which only have com6 and com7. My navman software does not have com6 or com7. It only have com1,2,3,4,9.
therefore i cannot match the com port.
Please help guys.
THank you
I have actually read some more in this forum and i have no activated the GPS setting in the control panel. i have set the program to com4 to corresponse to the navman software.
After doing all that i still cannot get it to work still wont connect!
please help guysss
Thank you
Just found out SmartSt V2 does not work with window mobile 2005
which gps software is compatible with my dopod 838? I'm located in Australia..
Please help
hi, i think u have to modify the *.ini* file (use a hex editor software) and in there u can change the com port there and that should work, also you need to follow the steps above as someone mentioned before regarding pairing it etc.....
Try "GPS Dash" to set your com ports.
Related
Hi all,
First I use Bluetooth MSI (10 Meters) I already install Deriver and set up it, it generate COM port for bluetooth 13 ports (COM 3-13) and I use it with PPC XDA II. Now I want to change it to 100 Meters. I bought new bluetooth (Billiontion). Then I install driver on same computer and see bluetooth port because I want to setup for sync with my PPC. It show port number 14.
But my activeSync it can not setup for this port. How to delete Port 14 and setup it to Port 4, or how to uninstall old driver (MSI).
Thank you.
BTH TOOLS
TRY BTH TOOLS FREE FOR DOWNLOADING
Thank you so much.
Is it this file BTHTools1100.zip ?
If Yes, how to use it?
If No, do you have link to download. I search with google it can not found.
Do you have manual of this program.
Hi,
i have the following problem during the initialization of my bluetooth GPS device(HOLUX GPSlim236):
the bluetooth manager recognizes the device,but when i want to select a COM port as an incoming/outcoming port, i get the following error:
THE COM PORT COULD NOT BE CREATED.PLEASE CHECK YOUR SETTINGS AND TRY AGAIN
I want to use the GPS under Destinator PN and it allows only COM 1,2,3,6,7,9. But under bluetooth manager each of these ports results the same error(only COM port 8 and 0 is good).Maybe something uses those ports, but what could I do?
THX
you need to change the reg setting to the following
hkey_local_machine\controlpanel\gps setting
value name
group
value date
2
base
decimal
get a reg editor and do this then do a soft reset the under connections you will have a gps icon where you can set the software to a com port you like
that's not a solution. What you need to do is assign the outgoing COM port 0,4, or 8, and then change it manually in the Destinator INI file. There is an update available for Destinator that makes it WM5 compatible
my magician is with this fimware OS 1.12.00 / ExtROM 1.12.920 / Radio 1.12 and i have a GPS bluetooth after sucessfull paring i need to create a New outging virtual com port but when i click on my GPS device for creating a com port on the dropdown menu for selecting com i cant see any com1 com2 com3 etc so the magician automaticaly attach the com0 for my GPS but my igo gps soft dont have a com0 on gps reciver config menu what to do any help thx.
Install Pocket Bluetooth Tools. It can solve your problem.
hi guys...
need a little help.....ive got a registry editor but where or how can i change the default coms port?.
im trying to get tomtom5 up and running but it only shows com9,3,2,0 and the serial port...
the gps keeps on being set up as com6 but this option isn’t in the tomtom set up....
help please.......
thank
tomtom v5.0
o2 xda mini s
bt-gps
hi to every one my problem is the next i was searching for hours and hours and finaly my conclusion for my problem is getting a iso or a copy from hp getting started for 610c-614c. My problem is i dont have the cd and i try to get connected with my gps with destinator 6 the hp asset says gps module present but dissabled if any one of u could help me it will be
appreciated
i dont believe you need the CD to setup the GPS.
You have Destinator installed?
WHat Baud and COM port do you have set? Try Com port 6 and baud 56400
after flash a custom rom i had enabled the gps thx for ur help