Hi,
I've installed Skype and Acrobat Reader v2.0 on my brand-new Qtek 9000 (Italian ROM, v. 1.13.75 ITA). Even though both are supposed to be compatible with WM5.0, none of them happens to work. When I tap on the respective icons, a rotating raibow-disk cursor shows up - as if the application was being loaded - than it disappears and nothing happens. The application doesn't even appear in the list of running programs under Settings/Memory. I've tried unistalling and reinstalling many times, both on the device and on an external storage card, with no results.
Does anybody know how to solve this problem?
Ciao,
RoB
RE
Acrobat Reader v2.0 installed on my SD card works well without problem
both work fine on my SPV @ Qtek 9000
I had the same problem with Skype.....looks like it is starting but then nothing happens That said, it did load up once or twice.......out of loads of attempts !
I had the same problem with the Acrobat Reader newest version.
Finally i uninstalled it.
Problem solved with Skype!
Hi,
the new version of Skype for Qtek 9000 works fine, now! You can download it at he following URL:
http://skype.com/products/skype/pocketpc/download.html?device=qtek_9000
I still have problems with Acrobat Reader for Pocket PC v2.0, though... I wonder how the same program can behave differently on supposedly identical devices. Evidently, the problem depends on some "extra flavours" added by the various brands that commercialise the Qtek 9000. By the way, my device is unlocked, that is it can accommodate any SIM card.
Any advice on registry tweaks that can help solve the problem? Since Acrobat Reader DOES run on other Qtek 9000 devices, it definitely cannot be a serious compatibility issue.
Acrobat Reader works if Pocket Hack Master is not running.
I had the problem with Acrobat Reader 2.0, but it worked in 'Safe Mode' (Part of SBP Pocket Plus). So I set about running various apps to find the conflict, and it works just fine for me if I exit Pocket Hack Master before loading acrobat.
Hope this helps.
I've heard rumours about only the english version of Acrobat Reader is running on WM 5 at the moment.
@riccioberto: I suppose you used the italian version?
Best regards,
tomestos
Acrobat Reader now works but can't be uninstalled!
Hi,
I followed tomestos' advice and downloaded the english version of Acrobat Reader for Pocket PC.
Before installing it, I unistalled the Italian version from the PDA by using ActiveSynch (I used the command for removing the application from both the PC and the PDA).
ActiveSynch DID NOT remove the application actually, but it DID remove it from the list of installed applications on the PDA!
When I tried to install the English version, I was asked if I wanted to uninstall the Italian version before. I replied "yes" but the application could not be uninstalled, so the installation of the new version failed...
But - this is the incredible part of the story - now Acrobat Reader works! It is in English and characters on screen are awful - not exploiting VGA mode, I guess -, but works.
The only problem is that I can't uninstall it in the normal way, so I'll probably have troubles with installing new releases.
Any idea on how to solve this further problem?
Regards,
Roberto
Adobe Reader Issues / Solutions
There are a number of Acrobat issues I am aware of and some solutions. Would love some help with the rest!
I have an Imate JasJar (and previously a PDA2k). These come with an application "ClearVue PDF" which allows you to view PDF files. However it doesn't "reflow" the text to make it easier to read on a small screen and doesn't support ebooks which are encrypted with Adobe's DRM. (Just about any ebook you pay for.) Therefore I prefer Adobe Acrobat Reader which is free. The only downside is the memory used and hassle for installing.
Issue 1 - ClearView PDF
After you install Adobe Acrobat; ClearVue PDF is still the default application for openning PDF files.
I have not found a way to uninstall ClearVue PDF. However as there appears to be no executables under program files then I don't believe you would save any memory. I only wish they didn't waste ROM space but that's outside my control. (I'm not into hacking ROMs.)
The easiest solution is to use a registry editor to delete the key...
PocketPC\HKEY_CLASSES_ROOT\pdffile
...BEFORE installing Adobe Acrobat Reader. The install then sets up the correct file associations and all is well.
Issue 2 - Acrobat starts and then closes
I have found that if you install Acrobat Reader to a storage card then...
You can launch the application and open a file - works OK.
If you open a file from Explorer (or other tool) then Acrobat appears to start up. It even shows you the reflow warning message. However it then closes! (Making it pretty useless.)
Work-arround - Install to memory. Not great because the Jasjar doesn't really have enough memory for my usage. (Today screen apps really need to be installed in memory in case you need to take out the card.)
Solution??? - Help!
Issue 3 - Activating
I've had lots of hassle activating both the PC version and the PPC version.
Solutions...
a) Install the latest version/update on the PC.
b) Disable any local (PC) firewall.
c) Use an internet connection that doesn't require a proxy server.
After that your on your own...
Anyone else???
Try this tip... it works from a SD card for me on my Universal.
http://www.aximsite.com/boards/showthread.php?t=103786
Related
60% of the time when I try to open a pdf doc in Acrobat Reader for PPC it causes the xda II to reset (sometimes this is a hard reset). I like the program as it provides more features/controls compared to clearvue but with all the resets I'm wondering if its worth the hassle.
Has anyone else experienced any problems with it/know of any solutions?
Thanks,
Coj
Acrobat Reader
I installed it too...and work fine to my xdall (upgrade: http://forum.xda-developers.com/viewtopic.php?t=17410&postdays=0&postorder=asc&start=0)
Try to find Adobe Acrobat Reader for PPC version 2.0! Its not on Adobe's site but I found it and its great!!!!!!!!!! Seems like the equivalent of version 6 of PCs for PPCs :wink:
Thats the version I'm using!! :shock:
...a decent replacement for MS Reader, for the Universal?
I've come across plenty that will read the MS .lit eBook format, that are for WM2002/3, but none that claim to be WM5 compatible.
I tried to install the MS's own reader, but it wouldn't run....
any recommendations....?
TIA
Paul
MS Reader works on my JJ but it can't be activated therefore I can't use it to read encrypted ebooks
I can run the installer, and it claims to install correctly, but when I run it it just says there is a missing or inaccessible file...please reinstall....
Having said that, looking at the .inf file...'Pocket PC using ARM'...maybe rhat explains why it won't work!
uBook is great
Also MobiPocket reader (google for beta 5 VGA version) but then u have to use CLIT to convert lit to pcr files.
Is there a working version of the acrobat reader for windows mobile 5?
My imate Jas-jar came with Clear Vue PDF viewer included. I think it is bundled with WM5 however it does not appear in the programs folder. Try opening a pdf file, and I think you will find it opens in Clear Vue .
ClearVue doesn't seem to open about 75% of my files, which were all created on highest compression... Gotta find a better alternative. I had Picsel on my Palm before that was awesome.
ClearVue is on the companion CD, you need to install it manually.
ClearVue is the most ****ty pdf reader I have tried so far and was the initial reason why I asked for adobe acrobat reader for wm5 in here.
How about adobes own with a VGA hack for force it to high res? this is what i use.
can you be more specific about that vga hack ? Also; iahev tried to install adobes acrobat reader, but had no luck ....
hi
i have working version of acrobat reader, got it from adobe website, here is the link
http://www.adobe.com/products/acrobat/readstep2_mobile.html
Try the one for ARM and X-Scale models
Ok Bye
get tweaks2k and use the 'force vga' thing
Hi,
Have a look at a program called Styletap - apparently it allows you to run Palm OS apps on Windows Mobile v5.
I haven't tried it yet, but I used to own a palm with a few progs so I might give it a go.
It might help you run your old Palm reader.
Regards
Michael
tintoy said:
get tweaks2k and use the 'force vga' thing
Click to expand...
Click to collapse
what does that 'force vga' thing actually do ?
You must download free Adobe 2.0 Version in ENGLISH !
That is the only one, work with the Universal.
All other Lang. are not working !
If it freeze during start, tap sometimes on screen,-it will works !
Adobe's version of Acrobat
Got to go with the Adobe version - sure its bloated and takes the usual age to load each time you start it fresh - but it beats clearview hands down
AgentJ said:
You must download free Adobe 2.0 Version in ENGLISH !
That is the only one, work with the Universal.
All other Lang. are not working !
If it freeze during start, tap sometimes on screen,-it will works !
Click to expand...
Click to collapse
It doesn't works with my qtek 9000
Strange, it works om my Qtek9000! Did you try a soft reset?
It works !
Just re-installed and soft-rest
Thanks rastaman !!!!
Re: Adobe's version of Acrobat
The Mailman said:
Got to go with the Adobe version - sure its bloated and takes the usual age to load each time you start it fresh - but it beats clearview hands down
Click to expand...
Click to collapse
Bloated? It takes a couple of minutes to load for me!
Gimme a PDA version of Foxit, and hurry up 'bout it!
It took 15 secs to load on my Exec. Not great but at least it can actually read PDF documents unlike ClearVue.
Adobe reader for pocketPC v2.0 work well on my o2 mini.
If I can remove some plugin, it could be smaller in installation. Anyone can help which files to remove? Thanks!
Regards,
Arto.
Adobe acrobat 1.0-better than 2.0
Hi guys. Of cource i am looking for something better that could open all sorts of books like all of us.I stumbled upon this post and I see your issues.I must admit thet the embeded clearvue Pdf(if I'm right) suks and I never used it.Also I downloaded the Adobe 2.0 when I got my Jasjar,just to realize theat IT HAS 14 MB!!!.A lot .And loading ...and loading...
Anyways,I owned before mj jasjar an Ipaq and had adobe 1.0 on it.So I installed it on my partner(Jasjar) and it works wonderfully for me.
Opens up in seconds and does all that needs to get a book or a document.
I'll try to put it up here someplace. Let's see if I can figure it out.
I found something here as well: http://www.hpcfactor.com/support/cesd/s/0067.asp
also : http://downloads.zdnet.co.uk/0,39025604,39050362s,00.htm
Good Luck.
I am again unhappy because adobe acrobat 2 reader cannot be installed on jasjar.
the one reader provided on jasjar clearview has very poor functionality (no good word wrapping) and makes it almost impossible to read with ease a pdf document (which are universally used to share infor on the web)...
this is another one of the bad strategy from htc/microsoft...
unhappy client i am wasting my money on a unit which is worse that pda2k (i now use pda2k exclusively and jasjar is gathering dust like paper weight)...
i tried to sell it nobody wants it!
RE
I have Acrobat Reader v2.0 installed on my QTEK 9000 (a ariant of the Universal)
If you've PHM installed just exit the program befor installing Adobe Reader v2.0
I also got Acrobat Reader 2 on my Qtek 9000.. no problem except its huge size :?
But there is a new version of Clearview, now... maybe it could be a bit better :?:
As far as I can see, the latest version of ClearVue PDF on the website is the one that comes with the Exec, i.e. 2.41.387. It may be small but it's hopeless in that it won't open the majority of the PDF files I have. Adobe Reader 2.0 installs no problem for me and so far seems to work with anything. The size isn't too much of an issue since it's on the SD card.
Hi Peeps,
I have a 20mb PDF installed on my Tytn. ClearVue can open the pdf, but when I try and scroll down the document I get the progress bar at the bottom like its trying to display the page but instead it closes the application completely.
I have downloaded Adobe Acrobat for Pocket PC version 2, however it fails to install and states its not got a trusted certificate.
Can anyone help?
Cheers
Pdog
I could be wrong, but I highly doubt you'll be able to open a 20MB file. You probably don't have enough RAM available...
I have a similar problem with ClearVue as well. In my case it immediately closes when trying to open any PDF file. Anybody an idea is really appreciated.
Thanks
StonyA
Also i've the same problem. Pease help us !!!! Thanks
Have you downloaded the correct version of Adobe for PPC? I have it installed and no problem opening files.
efjay said:
Have you downloaded the correct version of Adobe for PPC? I have it installed and no problem opening files.
Click to expand...
Click to collapse
Which one did you install? Do you have a link? When I checked recently, there was so sign of WM5 support ... ???
Thanks.
ClearVue PDF
I was using CV as it came installed in my Dopod. It must suffer from some sort of memory leakage or other gross memory management flaw since it takes forever to "redraw" even a small document of less than 70Kb. I tried to ope a 1.4MB document and went ok, aside of the time it took to display each page. In short, it is useless. In spite of no specific support mentioned on Adobe's web site, I went on and installed Adobe for PPC 2.0. It worked flawlessly! For those of you who are interested in downloading the app, here is the link: http://www.adobe.com/products/acrobat/readstep2_mobile.html
Disregard the warnings referring to compatibility and/or certificates. It should run perfectly. As for screen redraw speeds, no comparison! Adobe PPC2.0 beats CV hands down!
Finally, does anybody know how to uninstall ClearVue? Is it possible at all? If not, I may have to use Pocket Tweak to redefine file extensions for Adobe PPC
Cheers
Hi All,
Had my Dopod838pro for 1 month, now had problem
ClearVue PDF - Dopod program.
Whenever I click this program , will show this error
message:
A problem has occurred with gwes.exe.
Please tell Microsoft...
- No third party program installed yet except those from Dopod
- Done soft reset but still same problem.
- Cannot find this software in Remove Program
Can any one pls advise on how should i reinstall or remove this program or recitify this problem.
Thanks for reading.
hihi,
I have same problem with sylvester. Anybody know solution, please kindly help. Thank you.
I managed to get the ClearVue PDF working again
after 2 hard reset. On the first hard reset, ClearVue is better but still seem to be having the some problem, so I tried a second reset after which is OK. Maybe you should try that.
sylvester_k said:
I managed to get the ClearVue PDF working again
after 2 hard reset. On the first hard reset, ClearVue is better but still seem to be having the some problem, so I tried a second reset after which is OK. Maybe you should try that.
Click to expand...
Click to collapse
That's worth a try. Also the Graphics, Windowing and Events Subsystem (GWES) controls the graphics output. Some folks have found that having cleartype enabled causes errors.
Mike