Hi all,
Iv just tryed to unlock my MDA vario it was on T-mobile befor when i put a o2 sim in it said put some code in but iv tryed to unlock it and downloaded some programs from the net and connected my MDA via USB and unlocked it but 1 problem when i put the o2 sim card in it works fine the phone reception is good but when i try to call the phone i get this msg
It has not been possible to connect your call please try againe later
Help please.
Radox said:
Hi all,
Iv just tryed to unlock my MDA vario it was on T-mobile befor when i put a o2 sim in it said put some code in but iv tryed to unlock it and downloaded some programs from the net and connected my MDA via USB and unlocked it but 1 problem when i put the o2 sim card in it works fine the phone reception is good but when i try to call the phone i get this msg
It has not been possible to connect your call please try againe later
Help please.
Click to expand...
Click to collapse
Try this... http://forum.xda-developers.com/showthread.php?t=285435
--M
HI all,
I'm desperate...
I recently bought an 02 Orbit that was supposed to be unlocked.
So I downloaded PDAMobiz_Dopod_P800W_AKU301_v1.1.0_Lite.exe, unpacked it and double clicked on UpgradeRom_P800W.bat
A dos installation routine started, then I performed a hard reset by pressing the softkeys + stylus reset.
and now I"m stuck on the O2 logo, with some red informations written :
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.28.0.0
but nothing else, the device doesn't boot :-(
I'm completely desperate... I had my Orbit working 1h only and now I still have my eyes to cry.
I've tried to install another ROM like ART_HTCWWE_11240501_026790_WWE_Ship, but when I launch ROMUpdateUtility.exe it says that no device is connected....
I tried to enter the bootloader but I don't understand how I could do that (by the way what do you guys mean by the record button? where is it?)
Could someone explain me how I can recover my crashed device please ?
Thanks in advance
ok I've found the record button and managed to enter the bootloader (red-green-blue screen right?). But it doesn't help. My device is not recognise by my PC anymore, no connection.
The problem is that I didn't make the procedure on IMEICHECK because the vendor said my Orbit was already unlocked. I know, I'm stupid, I should have....
Anyway, now I've my 30€ UNL file,
I've edited a ROM with the hex program, I've change "BsaD5SeoA" with "IMEICHECK save exe file" (I told you I'm stupid, or I didn't exactly understood what you mean, because I don't have any IMEICHECK.exe file)
I tried to launch a ROM upgrade but my device still not be recognised by my computer, even in bootloader mode.
Same **** when I try to launch the C3v1Unlock, it says no device connected.
Please, if you have anything to help me......
After i read this THREAD who explain how to repair my problem ...But it dosent work for me
When i want to flash it, it tell me :
INVALID MODEL ID ,with : RUU_Artemis_DOPODASIA_WWE_LOVE_1.28.717.1_INFINEon gsm4.1.13.30_02.69.90_Cmp_Ship_R.exe
INVALID UPDATE TOLL ,with : _ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe
And after have made the TUTO !
Click to expand...
Click to collapse
I saw this post on an other thread... I am having the same problem... I bought artemis from ebay and the seller told me that it was unlocked... But i can't flash it with these ROMs... Did you find a solution? Is it really unlocked?
By the way when the window that tells me "INVALID MODEL ID" shows up at the bottom and to the right of the window there is i big number... Do you know what this is?
Same problem here
I have THE SAME problemhere. The same message on the boot screen. It seems that we are not able to use our XDA ORBIT ;( any more
At least we can download oreginal XDA Orbit english or German ROM OR if someone write RUU for Xda Orbit. Than would be easy - you just go to boot loader and you start your RUU, or easily put .NBH file to your micro SD and flash it from micro SD.Too bad I can just cry over my Xda Orbit. PLEEEASSEEE HELPPP
I also heard that FTP ROM site is going down ---- XDA GENOCIDE!!! What ARE you doing people!
Try the orbit ROM on ftp if it is still there
When a seller says a device is unlocked, all they mean is that you can use any sim card of your choice. To be able to flash another rom you need to CID unlock it. For the Orbit/Artemis family we only have imeicheck selling the program for unlocking cid.
My advice would be to look for the orbit rom on ftp. If it does not work, check with imeicheck if their program works when device is in bootloader mode, and pay them and download the specific application for your device. Good luck
I had a problem with my Orbit when I tried to change the Rom to the PDAMobiz one. I ended up recovering it by...
1 - Hard Reseting it.
2 - Connecting it up to the PC then running C3v2Unlock note v2 from the the IMEICheck site. This made the screen on the Orbit go bright white.
3 - Downloading the the Rom listed in this thread and following the instructions with in the same
It means that my Orbit is seen as a HTC P3300 but it feels quicker. You do need the UNL file from IMEICheck to keep it unlocked. But it worked for me.
Yes I tried everything in bootloader mode,
the C3V2 Unlock program launched but after detecting the device, it says my device is corrupted with a kind message "[probably by your fault]" ;-)
So guys, everyone who's trying to upgrade : CID UNLOCK YOUR PHONE BEFORE DOING ANYTHING, and carefully read the (excellent) tuto.
FYI, here's the discussion I had with Imeichek guys :
------------------------------------------------------------
Hi,
I'm a little desperate and I hope you'll be able to help me...
I recently bought an 02 Orbit that was supposed to be unlocked (I didn't know the difference between SIM lock and CID lock)
I understood, too late, that I should have ask for my UNL file prior to do this stupid "direct upgrade" I did...
Here are the facts :
1- I didn't follow the instructions found on http://forum.xda-developers.com that explained how to order the UNL file and Unlock the device unlocked
2- I downloaded a new ROM (PDAMobiz_Dopod_P800W_AKU301_v1.1.0_Lite.exe)
3- I unpacked it and double-clicked on UpgradeRom_P800W.bat
4- A dos installation routine the started, then when asked, I performed a hard reset by pressing the softkeys + stylus reset.
now I"m stuck on the O2 logo, with some red informations written :
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.28.0.0
but nothing else, the device don't go further
I've tried to install another ROM like ART_HTCWWE_11240501_026790_WWE_Ship, but when I launch ROMUpdateUtility.exe it says that no device connected.
I managed to enter the bootloader but my device is still not be recognised by my computer (not connected message). I tried your C3v2Unlock tool but it says the same : NOT CONNECTED
So please, if you have any information or procedure I could try to fix my device, I would really, really, appreciate, especially after my 30€ contribution ;-)
Best regards
---------------------------------------
2007/2/17, [email protected] <[email protected]>:
Hello,
NO PANIC. You can fix the device. You have to find the CORRECT / a matching ROM for your device. For this you have to know what ORIGINAL phone it is (O2 Xda Orbit UK?)
Tell us what device it is and we try to assist you in fixing it.
Regards,
IMEI-CHECK Team
-----------------------------------------------
Thanks for your fast answer!
Yes it's an original phone, a brand new O2 Xda ORBIT, in box
Regards
Thomas
----------------------------------------------
Hello,
the language is important. Is it UK version?
Regards,
IMEI-CHECK Team
-----------------------------------------------
yes it's a UK version
-----------------------------------------------
Hello,
hmm, sorry to tell you but for the UK version there is no official ROM update available right now.
All you can to do fix it NOW is to send it to repair (service center).
For our customers we offer to fix the device for free (you only have to pay for shipping costs in both directions). We are located next to Glasgow UK. In case you are interested let us know.
Regards,
IMEI-CHECK Team
-------------------------------------------------
Ok,
I guess I don't have any other choice.
Wich ROM will you install if there's no official O2 Rom ?
What is the procedure, what's your adress, and how much will cost the return ?
Thanks a lot
Thomas
-----------------------------------------------------
Hello,
- we can install any ROM of your choice (it only needs to exist)
- we also will unlock the device and you can install ANY ROM you life afterwards
- the device needs to be opnened to use some special hardware to access the flash chip directly
- shipping back to (UK/EU) with INSURED Royal Mail is apx. (7 GBP/15GBP) depends where you are located.
Regards,
IMEI-CHECK Team
---------------------------------------------------------
ok thank you,
but will you be able to flash an O2 Xda Orbit with the french ROM that comes with the (Artemis) HTC P3300 sold in France ? this is exactly the same machine.
Regards
---------------------------------------------------------
Hello,
yes we can flash ANY available ROM to it.
Regards,
IMEI-CHECK Team
----------------------------------------------------------
here I am,
I guess there is nothing else to do.
First I want to thank you all for trying to help, then thanks to IMeicheck, they replied very fast and found a solution, even if I won't hae my Orbit for several weeks.
2- I downloaded a new ROM (PDAMobiz_Dopod_P800W_AKU301_v1.1.0_Lite.exe)
3- I unpacked it and double-clicked on UpgradeRom_P800W.bat
Click to expand...
Click to collapse
Maybe you should not have unpacked the file Just clicking on the file icon starts the procedure, which does some checks before actual upgrade starts.
I have switched so many times between the pdamobiz roms and the HTC one so many times I've even lost count
It's been easy for you... because your phone was CID unlocked ;-)
Well i had HTC ROM and now i have pdamobiz... That means that my artemis is cid unlocked???
my orbit is stuck on boot screen exactly as manples'. i tried to flash pdamobiz custom ROM. i can enter bootloader. can u tell me plz to what change "BsaD5SeoA" with "IMEICHECK save exe file" from imeicheck i've got c3v2unlock.exe & unl file. i tried flash it tru sd card-nothing. I've got o2orebit (ARTE200) please hlp
Psrejic, does your Orbit work again? I have the same problem. Can't get passed the splash screen because I flashed it with the PDAmobiz rom.
Only way to go is thrue bootloader. Did the SD flash work for you?
Same problem here Waiting for any solution ...
Only solution so far is imei-check service, witch will cost you: Price of sending to them: (UK) Then 20£+15£(aprox) to pay them for unlocking and repairing + sending back.
That's what I've done,
I received an email where they confirmed the reception of my device and that they flashed it with a new Rom. My device is supposed to work, it's great ! can't wait to try it.
Hi manples ...
You send it to imei-chek?
My Orbit works again! ... but not with a software solution.
I returned the phone to the O2 shop and they gave me a new one immediately. I didn't mention my PDAmobiz Rom upgrade offcourse.
It isn't the nicest way to deal with the problem, but when o2 flashes the rom on the phone they can sell it again.
Then I did the Imei-check solution. Worked and flashed the dopod rom on it.
hi to all yesterday I was your siimilar problem (I've try to install teh powermap rom...) so my Orbit O2 (original german rom) still only in boot screen, today I've try to install this magic rom:
art_tmouk_11311001_024990_wwe_ship.rar
I've press the comm manager button + power button + soft reset and my orbit it's enter in bootmanager mode so, i've install the TMobile UK rom (I was the O2 german rom...)
only in this mode my orbit work again.
bye
xda orbit stuck
i flashed my xda o2 orbir german rom with PDAMobiz_Dopod_P800W_AKU301_v1.1.2 and now it wont start at all i tryed to enter bootloader but i cant ( voice key and reset ) its stuck at o2 logo and :
IPL 3.04.0001
SPL 3.04.0000
GSM 02.00.90
OS 1.20.0.0
DOSE ANYBODY have a solution ? please help me !
keep up the good work ! thanks
Help!
Yesterday when i was trying to installed Leies CE-Star Crossbow on my x01ht, maybe it didn't support WM5.0 and now my x01ht is stuck in the bootloader screen forever!
I've tried to flash it again by micro SD card, it did completed the flashing process but it's still the same, stuck in the bootloader screen.
i've also try the mtty usb connection and set 14 0, still the same...
my bootloader version is 1.04
will there by anyway to fix it??
Please help...i'm a newbie to ppc and i've only been using the phone for 3 days!!
hi, as first look on wiki - http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes then for example in here - http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES or here - http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems problem 4. then ask us if it is another way to solve your problem ;-) and if this did not help, provide us more information about your device.
i have tried using the SD card flashing method with RUU_Hermes_DopodAsia_CHT_1237084_1060010_SHIP and HER_DopodAsia_1237074_1060010_WWE_SHIP.exe rom
But still no difference
do i need to use HTC Hermes SIM & CID Unlock . v3 first even though it's 1.04 bootloader?
does it work on my x01ht??
Please help...i'm really confused
Hey guys,
A friend told me to instal the new wm6 rom on my mda vario. I downloaded the rom but i forget to CID unlock it. When i start my mda i only see the tri-collor screen with:
above: IPL 1.06
in the right upper corner: RUU
a little above the middle: SPL 1.06
When i connect my mda with my computer my computer recognises the mda, i hear a tone and usb apears on the mda but active sync doenst show the connection
My problem now is:
I cant start the mda, i think i lost my old roms and the mda is useless now.
Please folks try to help me i realy need this mda for my work and im hopeless without it. When is start the MDA i just see the screen and i cant do anything but looking to that screen. the touch screen doesnt work and the keys neither.
Is there a solution to CID unlock my mda or to connect it with active sync so i can get in the folders or something and then install the older roms or so.
PLEAZ GUYS!
Thomas,
Thanks.
tommygreece said:
Hey guys,
A friend told me to instal the new wm6 rom on my mda vario. I downloaded the rom but i forget to CID unlock it. When i start my mda i only see the tri-collor screen with:
above: IPL 1.06
in the right upper corner: RUU
a little above the middle: SPL 1.06
When i connect my mda with my computer my computer recognises the mda, i hear a tone and usb apears on the mda but active sync doenst show the connection
My problem now is:
I cant start the mda, i think i lost my old roms and the mda is useless now.
Please folks try to help me i realy need this mda for my work and im hopeless without it. When is start the MDA i just see the screen and i cant do anything but looking to that screen. the touch screen doesnt work and the keys neither.
Is there a solution to CID unlock my mda or to connect it with active sync so i can get in the folders or something and then install the older roms or so.
PLEAZ GUYS!
Thomas,
Thanks.
Click to expand...
Click to collapse
you should be in the Wizard Upgrading, etc. thread.
You could be in 1 of 2 possible situations:
1. Your phone was a G4 and you flashed G3 bootloaders into it and now it is a fully fledged brick. (hope this isn't the case, but this happens when people jump in and don't read first)
2. Your battery is probably dead. You should have read before you jumped in. Have your friend recharge your battery since they seem to know so much about what you should be doing with your phone. If your friend doesn't have the same phone and already completed these procedures then you shouldn't have been listening to them in the first place. If you can't get your battery charged this way then you will have to buy one from a store that sells the phone or on ebay.
you will need to re-flash the button rom and complete the unlock. Then make sure you DO step 17 BEFORE you flash your WM6 rom or you will still be in a world of crap.
If you don't know what I mean by step 17 then go to the forum I mentioned above and look for a thread near the top that is Tagged with [READ FIRST]
Read that and you will be good. You need to talk to your friend and make sure that the next time they "help" someone they make sure to give them ALL of the information they need before they start trying to turn their expensive toy into a plastic paperweight.
I have a problem with my pocketpc (qtek 9100)
i start but he block in the DOS and he freeze and not start in windows did eny body now a boat this problem pleace help me
blerim said:
I have a problem with my pocketpc (qtek 9100)
i start but he block in the DOS and he freeze and not start in windows did eny body now a boat this problem pleace help me
Click to expand...
Click to collapse
Have you just flashed your device? It looks like it has gone wrong.
If yes Flash again to the original Rom or Wizard Love Rom.
that looks like a g3 ipl and a g4 spl. that's not normal...did you have a g4 device that you tried to flash with a g3 rom?
try this
Push the reset and them hold the camera
after the three colors com on
plug in usb
the usb light comes on you are alive
now if its a g4 then you habve to power out of it grab your manufacures 2,25 -2.xxx update and hit it make sure that your computer is not on hybernate and you screen saver is not on turn off the active sync usb conection.
if it recognizes the device it might take you 20 diferent tries but if it takes you will find your way out.
I bricked 2 from radio updates and the 2nd was a g4 i powered out with fariar 1.69. good luck now the fum begins.
If its a g3 well your in luck find the post data crash
ciao
thanks answer
but i did not flashing but he jost stop in the dos
after this i put universal rom he finished good and he sas congratulation but its same the problem
thanks for helping
blerim said:
but i did not flashing but he jost stop in the dos
after this i put universal rom he finished good and he sas congratulation but its same the problem
thanks for helping
Click to expand...
Click to collapse
If you put an HTC Universal ROM in your HTC wizard, you are screwed..
What ROM did you try to flash exactly?
qtek 9100
In my qtek 9100 I put this rom
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
blerim said:
In my qtek 9100 I put this rom
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
Click to expand...
Click to collapse
OK, that is a valid Wizard ROM
Please post ALL the steps you took untill you encountered this problem.
That way we can analyse what has happend.
Is your phone CID and IMEI unlocked?
What method did you use for unlocking?
thanks for questions
the-equinoxe said:
OK, that is a valid Wizard ROM
Please post ALL the steps you took untill you encountered this problem.
That way we can analyse what has happend.
Is your phone CID and IMEI unlocked?
What method did you use for unlocking?
Click to expand...
Click to collapse
I did nothing and i dont now its a CID or IMEI unlocked
se the foto he not start in windows he block in dos