Related
All sound from stereo speakers, phone speakers , mic are not working.
Only ringtone if phone rings.
you can only hear system sounds with headset and talk with headset.
Any ideas?
Have you tried turning the volume up?
darkblak said:
Have you tried turning the volume up?
Click to expand...
Click to collapse
I wish it was that simple, but alas I tried a lot , and it looks like I might have a faulty one unless anyone got an idea
I find it hard to believe that it's a hardware issue if both the external speakers and the headphones don't work at the same time yet the ringtones do work.....
I hope it's something simple and you don't have to resort to a phone return.
No Sound
Has any one found a solution for this problem, as I have the exect same issue. All sounds on exec dont work execpt when receiving an incoming call, when call is answered cant hear a thing, does work though with headset.
Have tested and sms, mms etc sound doesnt work, movies and music doesnt work either.
This is not going to help :roll: but I had a similar problem a few months ago on my XDA2. Phone rang, I tried to answer it, but couldn't hear a thing. No other sounds worked. Headphone worked perfectly. Soft resets achieved nothing.
Thought my XDA2 had died after 18 months of service, but then suddenly an hour later it all started working again and did from then on.
I have no idea why this happened or whether I did anything to fix it, but the problem isn't unique to the Universal.
I'm running PocketZenPhone. Maybe that could be interfering with the sounds somehow? Dunno.
Edit: I doubt it's a hardware problem so I definitely wouldn't risk sending my shiny Exec back to O2's monkeys for them to replace with another broken one. Did you try a hard reset? I didn't on the XDA2 but maybe it'd help. :?:
Try this...
Maybe you should try this, I use it in order to transfer all the sounds (including music) to the BT Headset when I am at the gym:
-Get Total Commander
-Go to the registry editor
-Tap or search for this directory: \\\registry\HKLM\SOFTWARE\OEM\VoiceCommand\
-Change the value of the String LaunAPEnable to value "0".
-Now press and hold the main button on the headset (the one you use to answer calls and transfer the call to the speaker of the Universal) and try if this worked.
-If you succeed or not revert the value of the string back to "1" or you will not be able to use VoiceCommand.
Hope this can help you.
Problem SOLVED. No sound
I had the same issue with my Jasjar. When you plug in the headphones it turns off the speakers except for incoming ring tones. The inside of the ear jack got stuck. I had to take apart the unit and bend the clip. It contacted so that it didnt' think there was a headphone inserted. I don't ever remebering plugging in a headphone to even have cause this problem. Its just a very loose contact. So when you get in there you bend it to make it stronger. You will understand once you have it apart.
Hi to all,
i'm in a deep trouble with my jasjar, after 2 months of work it simply stopped to use internal speaker & mic for phone calls, but it plays the usual ringtone...
it can't play mp3 and so on, but it plays the ringtones but not the alarm or sms things... so my question:
is the speaker really broken or what?
i noticed that sometimes with jasjar in portrait mode it works... no way in landscape, so i was thinking of some electrical connections between the lcd and the turning pieces...
i'll probably return to the assistance but i'd like to know your experiences...
sorry for my english and thanks to all in advance.
--
so long and thank for all the fish
--
matteo
Doesn't seem like a hardware problem. Did you try doing a hard-reset? Just press on "clear storage" in programs. Should restore your device to factory state. Hope you have backed up your PIM data through activesync. If you haven't then just copy the pim.vol file on your device to your computer. You can replace it after a hard-reset and all your PIM data will be restored.
Post your results here after the whole process.
universaldoc said:
Doesn't seem like a hardware problem. Did you try doing a hard-reset? Just press on "clear storage" in programs. Should restore your device to factory state. Hope you have backed up your PIM data through activesync. If you haven't then just copy the pim.vol file on your device to your computer. You can replace it after a hard-reset and all your PIM data will be restored.
Post your results here after the whole process.
Click to expand...
Click to collapse
i forgot: i've already tried an hard-reset and then a rom upgrade.. nothing seems to change...
it sounds strange to me too, cause the speaker is not gone at all, but it is a difficult thing to manage ...
what about electrical connections between the screen and the keyboard device? is it possible that it screwed up from a turn to another?
Matteo,
When my speaker and mic did not work (and ringtone did work!) I tested the sound with the wired headset. Everything worked.
Then I pulled the headset out again and the speaker sound is back. So it was a contact. But it felt like a software problem.
The Jasjar thought that my headset was still in.
Even the "speaker on" button did not react.
Does it change in "speaker off" when you click it during a call?
I think it will help to plug in and out the headset.
But give it a shot.
Huib
^ that's exactly what happened to my old imate jam. I did this and it worked! As far as i can remember, i was on the plane (14-hour flight) while using the jam as my mp3 player, the battery just died (after warning ofcourse) and when i tried to power it back on, the speaker is messed up.
pinoy said:
^ that's exactly what happened to my old imate jam. I did this and it worked! As far as i can remember, i was on the plane (14-hour flight) while using the jam as my mp3 player, the battery just died (after warning ofcourse) and when i tried to power it back on, the speaker is messed up.
Click to expand...
Click to collapse
Then it could be a software error in stead of a loose contact.
The PPC thinks that the plug is still in and needs "reprogrammed" by putting it back in and pulling out?
The fact that the "speaker on" button can not toggle itself anymore is a clear signal. In my case it could have been, because I pulled it out while Skype was hanging, so again no option to "tell" the Jasjar it is pulled out?
But of course an ordinary loose contact is still possible?
Huib
herpi said:
pinoy said:
^ that's exactly what happened to my old imate jam. I did this and it worked! As far as i can remember, i was on the plane (14-hour flight) while using the jam as my mp3 player, the battery just died (after warning ofcourse) and when i tried to power it back on, the speaker is messed up.
Click to expand...
Click to collapse
Then it could be a software error in stead of a loose contact.
The PPC thinks that the plug is still in and needs "reprogrammed" by putting it back in and pulling out?
The fact that the "speaker on" button can not toggle itself anymore is a clear signal. In my case it could have been, because I pulled it out while Skype was hanging, so again no option to "tell" the Jasjar it is pulled out?
But of course an ordinary loose contact is still possible?
Huib
Click to expand...
Click to collapse
I dont think this is the problem....he's reflashed the rom, done a hard reset...nothing has helped
I guess your hardware has indeed coughed up!
S
OK, then still we have not heard from Matteo, if he tried to move that plug in and out.
If he hears the ringtone and cannot speak/use the mike then he can be concentrated on that plug. Certainly if his wired headset works.
But if he reflashed we can be sure it is no software. (Still after reflashing some settings remain intact. )
Right/wrong?
At least in my case, with the same symptoms, it worked.
Huib
Hi man, thank u for ur reply...
u'll probably won't believe to me but when i saw ur post i did the plug in&out trick with the wired headset... nothing changed.
Today after some bluetooth problem with my old jabra it started again to work perfectly.. sounds strange? sounds impossible but that's it....
maybe the wired connector was having problem, but i think there is a more complex situation, maybe somethin' about the software but i can't say that for sure...
i didn't try yet a reset or so on.... i'm scared
thank u all guys, u'r the best...!
--
so long and thank for all the fish
--
matteo
Matteo,
I am happy you solved it.
It is always a problem to start a discussion with the supplier about problems like this.
Good luck in the future!
And Buon Natale e felice anno nuovo
huib
JASJAR PARTS
I have a complete JASJAR worth of parts available.
Complete motherboard, not working
Complete screen, LCD is cracked, works, with 5% of the screen bleeding.
Full case, no cracks.
Speakers, mic, camera, etc.
All covers in good condition.
I will probably part them out soon on Ebay.
I used this unit for parts to build up another good JASJAR, but it may be useful for someone.
Tim
Re: JASJAR PARTS
tdrager said:
I have a complete JASJAR worth of parts available.
Complete motherboard, not working
Complete screen, LCD is cracked, works, with 5% of the screen bleeding.
Full case, no cracks.
Speakers, mic, camera, etc.
All covers in good condition.
I will probably part them out soon on Ebay.
I used this unit for parts to build up another good JASJAR, but it may be useful for someone.
Tim
Click to expand...
Click to collapse
Hi Tim!
I really need one d-pad button (if it is a seperate thing then the big one without the center button). If you can sell it to me, please send me a mail.
THX
FWIW, my Jasjar has been acting strange lately with sounds. The other day I thought my speaker was toast and found that, upon going into Sounds & Notifications, all the checkmarks for sound were unticked. Turned the sounds back on and, wow, they worked.
All my mailboxes disappeared yesterday (Besides Hotmail, Outlook, Texts, MMS), so I think WM 5 might just like to play tricks with the registry. It's a long shot, but check those sounds & notifications settings - it saved me a heart attack.
Again.. Speaker Gone
Hi to all, first of all happy new year.
After several days without problem my jasjar re-started to think it's headset is still plugged-in.
No sound except for the ringtone. No effects on the speaker on in call...
Obviusly the plug-in plug-out trick of the headset doesn't help.
So, if it worked for several days it's not an electrical problem.
Hard-reset doesn't help... is there a way to tell JJ to not use the headset or something like that?
what do u think about?
thnks to all
--
so long and thank for all the fish
--
matteo
It's seems like your headset jack is creating the probelm. The only way right now is to send it for repair. Unless you can do the repair yourself.It seems like the headphone jack , one of the contact point is connected telling your JJ that there's a headset inserted. I might be wrong though.
Thank for your quick reply,
is it possible to do some software trick to disable at all the headset?
or is it possible to attach another jack with pin connected in some way to tell JJ to not bother...
--
matteo
SOOOOOOOO Frustrating
I have the same problem and cannot get my sound back!! I am able to take the Universal (XDA EXEC) apart, and can access the headphone jack, but i cannot tell what it is that I need to change to get my sound back, If anyone has some insight, please help out, thanks
Hi everybody,
I have this one problem. After 2 days of usage, my Hermes suddenly went mute. No vibration or screen click can be heard even If I changed it to the loudest. I missed a lot of calls and sms due to this problem. The only way to solve this problem that I employ is by soft-reset my device.
I really hope somebody can help me tracking to root-cause of this problem and in the same time providing or proposing a solution to it.
Kindly help. Regards
morisa
Device: DoPoD 838Pro
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Phone goes mute
I think I'm having that problem too. Just out of the blue it happened. Didn't install anything extra the whole week. But when someone calls it rings, and if it's missed, it doens't play the miss call tone... or any other sound in that case.
darky said:
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Click to expand...
Click to collapse
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
mmorisa said:
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
Click to expand...
Click to collapse
Got the same issue here and I don't use speakerphone
my pda´s auto mute so
No sound although speaker icon no in mute
I have the same problem. Out of the blue no sound is heard at all. I tried changing volume but it did not do any thing. Had to shut down (not soft reset) and restart device and it works fine. This happen several times and I can figure out why it does this.
If anyone can help...
Tal
Same here, I'm using a X01HT Softbank variant TYTN flashed with the latest HTC WWE rom and after about like 12 hours of use the device goes mute for some reason, making calls it works perfectly but playing sounds or ringers the speaker does not work. Anyone have any ideas? I'm thinking of maybe re flashing the device since most of my information is on my storage card. I'll see if that fixes the problem :-\.
same problem here....
Same here. Only a reboot fixes it.
I have the same problem but it only happens when using the speaker phone. After the call ends, then there are no more system sounds etc. I then have to soft reset, which pisses me off as I use the speaker phone plenty in the car.
If i dont use the speakerphone, then there is no problem. Kind of strange....
Has anyone got any ideas on how to solve this?
I have same problem. I thought it was software related, but seems that it is caused by the speaker phone. I had the exact same problem with my old IPAQ 6515. It must be a software issue with WM although the 6515 had WM2003SE and the TYTN has WM5 so I do not know. Really annoying though as I use this phone for an alarm and it never goes off because the sound turns off sometime while I am sleeping - Uhggggg!
I also have the problem. Only a Softreset brings the speaker back to live.
my new problem...misery loves company
same here; curiously 2 pages into this thread and there are no real solutions.
I have solved the problem on my TyTN.
The Midlet Manager is the root cause for the Phone Mute issue on my device.
lol I just started getting this issue out of the blue after a couple of months and I didn't install anything :|
yeah nothing but a soft reset brings the sound back
Happens to me too. Strange coincidence - I've just checked my m3100 and it's giving me the silent treatment now. Time for another soft reset
I never use Midlets, so that rules the above theory out for me. However my battery was almost dead. I was using WiFi at the time, which turned itself off when the warning notifications popped up. Maybe when the battery drops below an acceptable level it turns the sound off to save power, but doesn't restore it after charging?
nope it happens to me even if my battery is fully charged
this used to happen on my i-mate PDA2k, and my JasJar (Universal) running both WM5, AKU3.2, 3.3, 3.5 and unfortunately even WM6 :S
Hi All,
After checking and testing the phone. I found out that the only way for me to solve the muting problem is by silencing the notification sound when a new email arrives. Since I have an unlimited EDGE/GPRS, my push mail is working around the clock. Thus, by not having the new email sound notify, the muting problem gone. This is caused by the notification event locking up the sound and not releasing it even after I read the mail. Previously the only way to resolve is by soft-reset but now, no more.
I have no idea whether this work or not for others but you might try and post your solution here.
Regards,
morisa
All,
I have a MDA Compact II using the latest T-Mobile ROM and experiencing a problem regarding incoming phone calls and text messages notifications. I have set the phone to ring full volume and text messages are assigned to an audio notification. Occasionally when I receive texts/phone calls there is no audio notification even though they are switched on. I am missing quite a few phone calls and the only way to get the audio notification back is to soft rest the phone.
Does anyone know how to get around this?
Thanks
M
Just to say I have exactly the same problem. phone working fine for 3 months then sound only after soft reset, then stops working after a couple of days. i cant attribute it to any event
U2 have probably a program installed which is eating up sound handles (i.e. not releasing them after usage). A soft-reset releases them of course. So you have to uninstall some 3rd party software to find the nasty one...
No Audio
Hi
Am running a T-Mobile Compact 2 with WM5, also installed is Spb Pocket Plus
I have no audio for any Windows Media Files or for any sounds / notifications e.g. the alarm. I do get audio playback and notifications through wired headphones. The phone will ring and vibrate when called.
2 Soft resets and the removal of an Alert progam unwittingly installed from Skyscape (medical and nursing texts for PDA) have not resolved the issue.
I have been into sounds and notifications and ticked all the relevant boxes. Interestingly in notifications I ticked the box for the device to vibrate when using activesync. It was vibrating but not making any sounds earlier.
One of the seniour guys at Pocketnow.Com has suggested that I have somehow turned down the speaker volume. If so - how do I turn it back up? Trust me when I say that the standard volume display shows volume at full.
Any ideas?
Will.
Hi
I've just got back into work tonight and synced with my work PC. When active sync started up the audio came back online. I have no idea why.
Any deas?
Will.
Still No Audio
Hi,
Last night the audio on my T-Mobile Compact 2 came back online when I was synced with my work computer - great! I even unplugged the USB lead and audio remained. I then resynced and carried on listening to headphones for a few hours while I worked. When I disconnected I found that Audio had died again. I therfore assumed that it was an issue with Activsync 4.1. I deleted the sync relationship on both my device and the PC, did a soft reset and created a new one. Still no audio.
Does anyone have any ideas about what is going on? I am thinking about a hard reset if no one has any thoughts.
Will.
Hi,
have just tried calling my deviced from a landline, what i've found is that the device will ring but that I am unable to communicate using it (Can't recieve or send voice) unless I use the wired handsfree kit. Have not tried a bluetooth headset.
Will.
Sound problems with telephone
If your PDA works when playing sound files but you cannot hear anything when telephoning, the problem is usually bad contacts on the phone earpiece.
The PDA has 2 speakers, one for sounds and a smaller one for the telephone.
You must open up the animal and clean the contacts on the motherboard.
Hope this helps.
Bob
I have the same problem...sound is often working normally, but sometimes it just stops for a few days or longer. It is very annoying to always take the wired headset with you. Soft-resetting does not help in my case. I also have SPB pocket plus installed and a wireless network SDIO card. I could however not find a general rule that makes the sound stop... e.g. installed software or activesync problems.
I read earlier about cleaning up the speakers, but I have no idea how to open up the phone. Suggestions?
It could be the problem from the wired handsfree jack/socket, once you are taking the pin out, the socket is not switching the device speaker functionality back.
The picture attached is for illustration only, and the functionality is to cut all the sounds from the device and through to the hansfree, and once the handsfree is out then to restore the device's original sound system.
Not 100% sure but someone can try to clean the jack without opening the device.
1. Switch-off the device, remove the battery, leave it for 10-15 minutes.
2. spray a minimum quantity of CONTACT CLEANER ( http://www.maplin.co.uk/Module.aspx?ModuleNo=4153&criteria=contact cleaner&doy=15m11 )
3. Leave the device again for 10-15 minutes to evaporate any moisture
4. Put back the battery and try now.
GoodLuck
Sidd
Has anyone tried yet??
yes, hands-free socket could be the problem
My beloved Jam suddenly lost sound yesterday, and it does seem to have been caused by a physical failure inside the hands-free socket. I was able to fix the sound by opening up the device, opening the little black box that houses the socket, and tweaking the contacts.
All sound suddenly disappeared except for bluetooth and the wired hands-free earphones. Without using those accessories, there was no phone audio, no sound from speaker (from ANY source), and--interestingly--the mic did not work at all. But calls worked fine through the BT headset, and all sounds from all sources came through the wired earphones when they were plugged in.
This evidence all pointed to the existence of a switch inside the hands-free socket that was stuck, telling the device to send all sound to the wired earphones even when they weren't plugged in. After opening the device and the box that houses the socket, I pried the contacts a bit with a pocket knife, hoping to ensure that when the there's no jack inserted in the socket, the device will know it. Sure enough, after I put things back together, sound is once again functioning properly. Whew!
BTW, the problem started after I took the Jam skiing so I could listen to music. It might even have been caused when the earphone jack was violently pulled out at one point. Anyway, I had already decided not to try that again, because the Jam seems to stop functioning reliably above 9,000 feet.
Hi, I had the same problem as all of you, what i did to fix it was...
1. plug in handsfree
2. pull handsfree ^up^
3. now slowly pull out
This should cure the problem as it cured mine
thousand thanks to Ayyub and mtn_lion. i'm glad i went to page 2 of this topic. now i can invest my time for important projects. the importance of sharing ideas in this world will help evolving each other without having to go through the same paths again. to everyone reading this: it's okay to share your painful steps even though you didnt find a working solution! dont make others do the same mistakes over and over again. support the evolution. it could save your life and millions of others soon or later.
polar20
We have to thank everyone who posted in this topic. Without them, we would mostly still be struggling. Great contribution folks!
same problem here
I, too have an t-mobile MDA and have had the same exact sound problem with and and have exchanged two with t-mobile - all three lost sound after a day or two and the only thing that brings it back is a soft reset. I do NOT use a hands free unit pr plug anything into the headphone jack so that's not the problem. T-Mobile claims to know nothing about this problem....
Jim
Littleton, CO
well, i was experiencing the same problem when uninstalled "pocket zen phone" application. after uninstall, charmer sometimes lost sound completely and only softreset brings the sound on again. hardreset solved this completely, not using PZP anymore...
Hi I have this same problem with my T-Mobila MDA Vario II, it did hapen before to me but i just did hard reset and thath solved the problem, but this time it didn't helped. I allready reflash MDA with 3 different systems and still this same, i was trying to plugin in and out handsfree kit but that didn't help. MDA doesn't have any sound now, only thrue handsfree kit. Is any one have any more ideas what i can do?
It unblocked it self after 24 hours lying on the shelf, so still don't know what's couising the problem.
Hello,
i seriously need help.
Until this morning, my X1 worked. Over the last few days I was playing around a bit with various TF3D options, etc. I should note that I did not touch the ROM.
Then suddenly my phone gave no sound anymore.
No audible resonse to a stilus click on the screen.
No sound from FM radio.
No sound from phone (neither ring nor can I hear the caller).
(Vibra alarm works when activated though)
When switching to speakerphone I hear a very soft static crackle when doing the switch. Just as if the speaker is turned on. But then - no sound at all.
No microphone function on phone (caller cannot hear me).
No sound via headphones on phone.
No sound via headphones on MP3 playback.
Everything else appart from sound works. Even the phone can make a connection when calling - you just hear nothing.
I tried a soft reset. Nothing - still no sound.
Then I tried a hard reset:
Obviously the hardware of my speaker is ok. Because when I make a hard reset, there is the "pling" sound to inform me, that I should calibrate my screen.
Then there is another "pling" when the message appear, asking if I want to get the automatic provider settings updated.
But afterwards - no sound at all in the whole phone.
Then I went to update the ROM, thinking I might have (no idea how, but you never know) done something to audio drivers. I replaced my German T-Mobile ROM with the prepared German ROM without branding from this thread:
http://forum.xda-developers.com/showthread.php?t=446070
But still - same result as above.
Anyone got any idea?
Really nobody having any helpful comment?
did you try to change the radio??
I flashed a whole new ROM - same problem persists.
Besides: It´s not a Radio problem because system sounds and MP3 playback don't have any sound either.
Stating the obvious
Sorry to state the obvious but it sounds like the connection or the speaker module has gone. Have you recently tried the head phones on the X1? please see below link for a possible reason.
http://forum.xda-developers.com/showthread.php?t=282553
excersise your right to return
Regards,
Creamy-Goodness
Hello Creamy-Goodness,
thanks for you input.
If there was somewhere a hardware switch for sound output to speaker or headphones (which I doubt) that is stuck, it would not explain why I have neither sound in speaker NOR headphones. (One would assume that depending on the position of the switch at least one of the two should work.)
Apart from that I only tried the headphones to troubleshoot the problem after I found out there was no sound.
Nevertheless interesting, that this happens to other devices.
Speaker module cannot have gone either. There is an audible system sound from speaker right after hard reset to inform me that I need to calibrate the screen - but no sound anymore afterwards.
I will try to have the device swapped next week.
reg. sound issue
I'm suffering from the same problem here.
it only freggin vibrates.
TheMobilist said:
I flashed a whole new ROM - same problem persists.
Click to expand...
Click to collapse
Usually there is a simple fix which involves replacing a DLL, but not in this case of course - unless that ROM includes the bad DLL. I seem to remember it was a problem which occured after installing TF3D, but I couldn't find anything when searching just now.
It might be worth you checking the ear-speaker sound (make a phone call), as there is always the possibility that sound is being re-directed or intercepted (by something like Troca2). Check what programs and services are running.
Tests should be done with a known-to-work-fine-ROM of course.
Okay, I finally got the original ROM to flash the X1 back.
And strangely - when after one week of not using it I turned it on again to flash the phone, I got my sound back.
I have absolutely no idea what happened and why, but I am glad that I do not have to send it back.
@k_ash82
What I did is:
Turned my X1 off (not just stand-by), really off.
Waited one week.
Switched it on again.
I had my sound back.
No idea why, but maybe that works for you as well?
Just try it and please post your experience.
It would be very kind of you to share the german t-mobile stock rom with the community . Perhaps it could be added to "Xperia ROM and Guides" Thread, too.
I have no sound sometimes with this rom
http://forum.xda-developers.com/showthread.php?t=460190.
After switch off and turn on the phone again the sound is back.
Karsten
i have original sony rom (no branding) and also the same problems
no sound after a while (sometimes when phone goes in standby, sometimes just without a reason)
cannot play any sound in no application (media player,core player,etc) also the phone ringing or sms sound is off.
but the most annoying thing is, i can make a call, the call goes through, but I can hear nothing from the called person.
sometimes it works when i switch of the phone and restart, but sometimes I have to do 4 or 5 restarts.
the phone is now 1 week old, an I haven't installed Touch3D or anything like that, because I made hardreset and left the original configuration on factory settings, just to make sure, that it's no software error.
anyone got a solve for this problem actually?
if I ask google, there are many people with this problem, but no solve found till now
i have an issue with the speaker too but not exactly the same as the one described above.
my speaker still plays sound but it is about 10% of the original volume when it is already set to loudest (you have to put your ear right next to the speaker to hear the sound)
after i re-flashed the rom, it worked normally for about half a day until the problem returned
can anyone please help??
i keep missing my calls ><
thanks
this is a well known issue on some X1 phones ! you cant fix this with any software-update because it is hardware related. some x1 phones have it like every 2 weeks, others 3-4 times a day. most of the time you can just reset your phone but this is not a solution.
you have to send it back to SE in exchange for a new one.
i called my provider (o2) and they delivered a new x1 _on the next day_ in exchange (they have a 48 hrs delivery/pickup/return service).
the new phone works just fine !
- QuadWord