Related
I have officially screwed up my RSU. I can boot into CE just fine, but there is no radio stack to speak of. After having many partial attempts, there's just nothing there. I've tried everything (or so it seems). I can do an activesync connection, btw.
Whenever I try to run PROGRAMME A, it just hangs. I hit the next button and *nothing* happens. That's any program a, whether from ATT or Tmobile.
Hi there,
Did oyu try installing the Radio Stack Programma A thingy from another windows installation? Another pc? Perhaps that will work.
Os course... you could be trying to install a version which is not suited for your GSM provider/GSM hardware. Look for info at your GSM provider website. It's hard is not impossible for anyone here to tell you which version should work for your device.
Cya,
Oz
Yeah...I tried it on my laptop too. The problem seems to be program b, which rewrites the RSU. It simply won't do it for some reason. This shouldn't be the case.
Come on....someone must have some stupid trick to re-flash the radio stack. I remember seeing solutions to the "1% problem," but all of those solutions were with the non-US radio stacks. :-/ I didn't buy my phone from Tmo, so I have no warrenty to speak of.
which rom and ruu were you using? seems like you were using the .exe correct? which unit/network are you on? this might help you get some help. be specific with the problem, etc.
What versions (ROM and Radio Stack) were you using prior to running the EXE upgrade?
What versions are currently installed?
And which radio stack are you trying to upgrade to?
I was using 4.00.005 and the newest ATTWS ROM before, and I was trying to go to Yorch's newest Tmobile beta, the one that includes the RSU.
Right now I have the most recent official Tmobile ROM and no radio stack on there.
Ejdmoo:
After decompressing the rar file, look for the two RSUpgrade files; one is .cp64 and the other is .exe. Copy them via Activesync to the windows directory on your TMo PPCPE. Then execute the RSUpgrade.exe file. That should reflash the new radio stack. It worked for me. Good luck!
David
I am in the same boat as ejdmoo, and had the same roms installed and all that good stuff...still no go with fixing the radio stack. One thing I noticed is that I removed the .cp64 file from the \windows directory and it still tried to update and failed at 1%. I don't think the version of the .cp64 file matters since it is not getting that far.
Another issue that popped up after the failed update is th unit does not charge, it will only run on AC, and it does not show a status in the power app under settings. Bout you ejdmoo?
Come to think of it, I am having the same power/charge problems. Also, I have tried copying the RSUpgrade.exe program to the device multiple times and from multiple sources. Also, I copied some of the other required files (something map and .c64 file), still didn't work. I think it *must* have to do with the RSUpgrade.exe, but I wouldn't know why.
FYI...I'm going on vacation this week (luckily I have a backup phone), but I expect this to be fixed when I get back! :!:
C:\Program Files\SX56 upgrade utility>adaptrom
ERROR: GetConnectionType - An existing connection was forcibly closed by the remote host.
error getting connectiontype
Click to expand...
Click to collapse
This is what adaptrom returns now, this is when the tmo is connected and browsable via AS. Anyone have any ideas why this would be happening?
Since my unit will be replaced I am willing to do some scary things with it, so if any of the xda-devolopers want me to try something let me know. I have an sd reader/writer and a usb cable but no serial cable.
ejdmoo said:
Come on....someone must have some stupid trick to re-flash the radio stack. I remember seeing solutions to the "1% problem," but all of those solutions were with the non-US radio stacks. :-/ I didn't buy my phone from Tmo, so I have no warranty to speak of.
Click to expand...
Click to collapse
Been there seen that!
Here is hope I fixed it:
First go to the below site and download and install the v4.21 ENG radio stack upgrade. Now here's the tricky part but I must warn you I did all three and really don't know which one did it, might have been a combo of all three.
1. Entered bootloader mode and selected the 900 band and re-booted.
2. Removed the SIM card and rebooted
3. Entered bootloader mode and turned off the radio.
Note you'll know when you got it right because you'll have a stable Active Sync connection. So after each of the above steps see how stable Active Sync is before trying the next step.
Reran the T-Mobile upgrade (PC install) and all went go well.
02 Radio Stack Upgrade v4.21 (1.54MB) Download.
http://www.o2.co.uk/business/productsservices/xda/romupgradedownload/0,,113,00.html
I'm not sure in which order you want me to do what...?
I had the same problem, but a hard reset fixed it for me.
David
For all of you having the same problem I have been having after upgrading to the O2 4.21 RSU here is what I have found makes the loading of the RSUpgrade files into the \windows directory work. You need to also copy the monitor_ul_bs.m0 and monitor_ul_bs.map files to the windows directory. Then when you execute the RSUpgrade.exe it works.
barjohn you are a genius!!! I can't believe I never thought of moving the other files before...you rock I am now in possesion of a fully working WM2003 T-Mobile PPC PE!!!
Thank You barjohn!!
mdavidm said:
I had the same problem, but a hard reset fixed it for me.
David
Click to expand...
Click to collapse
Boy I forgot about doing the hard reset, what step was that?
It must have came right after the Radio stack upgrade, Right!
So it appears that what works for some doesn't work for others, strange business!
I read barjohn's fix were he manually copied some missing files into the windows folder and that solved it for him, I guess we were just lucky! :?
barjohn said:
For all of you having the same problem I have been having after upgrading to the 4.21 RSO2U here is what I have found makes the loading of the RSUpgrade files into the \windows directory work. You need to also copy the monitor_ul_bs.m0 and monitor_ul_bs.map files to the windows directory. Then when you execute the RSUpgrade.exe it works.
Click to expand...
Click to collapse
So it would be save to say that one should just copy the above files into the Windows folder first before starting the initial upgrade and forgo all of the other headaches, agreed!
Qman,
That's a great idea, but then we would miss out on the thrill of thinking we have transformed a great electronic device into a $400 paperweight! What fun is it if everything works out on the first try? Have fun!
David
Well Ive officially made my tmobile ppc a $400 paper weight. I was running the Kitchen rom with ATT radio stack and I attempted to update the RSU to the latest tmobile version to see if it improved the signal meter using the method mentioned here. I copied the files suggested here via activesync to the windows folder on my ppc and ran the exe, the upgrade stopped at 13% and that was it. Unfortunately I dont have a SD reader so Im high and dry until tomorrow. I can access the bootloader and I get the GSM error and thats it.
I upgraded to 4.005
it was OK, everything worked
then I upgraded to the radio stack 4.21 from RSU4.15 O2
it was done OK, but my PPC do NOT see the network!
I tried to use bootloader (right button) to change the GSM band
from 900 to 1900 to 900/1800 and then I made soft-reset each time
but it was nothing.
network is unrecognized.
I'm ask for help in European network bands.
Can I degraded radio stack?
or can I find correctly radio stack for European networks?
backup do not work too
I have the backup of my previous PPC2002PC
I made via booloader to SD card
I tried to reinstall from the backup
everything was ok,
but after the reset the old OS try to upgrade the system
(I think it try to upgrade the radio stack, because the old OS I see)
then it display "Flash Failed" and going to the reset and again again again...
so, this way is not working.....
where to find a correct radio stack for European networks?
solution is here!!!!!!!
SOLUTION IS:
http://xda-developers.com/phpBB/viewtopic.php?t=2038&start=75
(page 4)
"For all of you having the same problem I have been having after upgrading to the O2 4.21 RSU here is what I have found makes the loading of the RSUpgrade files into the \windows directory work. You need to also copy the monitor_ul_bs.m0 and monitor_ul_bs.map files to the windows directory. Then when you execute the RSUpgrade.exe it works.
I posted this on another thread but thought it might help someone else here."
it made me 6.24 version! and it works now!!!!!!!!!!!!!!!
thanks barjohn, so many thanks!!!!!!!!!!!!!!
Hello,
where to find these two files?
Thanking you all
I have in my possession 2 XDA's at the moment. 1 with a USA T-Mobile radio version 6.18 and another with a UK O2 4.21 radio version. I'd like both to have the USA T-Mobile radio version 6.18.
Can someone explain or point me to how to copy the radio from 1 to another with an SD card?
Thanks in advance.
I know about the SD backup and restore through the bootloader. I have version 5.15 btw.
When I try to backup the GSM, and I assume this is the radio, it says "Please connect RS232 and run PC Monitor."
I don't know what this means and havn't found a reference to it yet on this site.
Just get the update from tmobile, and take the radio files out of the english directory and put them in /windows on your device, and flash the radio that way.
The TMobile update has 1 NBF file - NK.nbf The radio and the OS files aren't separated.
Once the T-Mobile OS update is finished, it launches the TMUpdate program that then tries to updates the Radio, but since the radio is at 4.21, it won't update the radio to 6.18 because of some internal version check.
johnp263
I have a similar problem with an O2 XDA.
OS update works fine. During GSM update the connection dropped.
After reboot I have a blank screen.
When I try to backup the GSM, and this is the radio, it says "Please connect RS232 and run PC Monitor."
I also don't know what this means.
:?
Hi,
I installed XDA-developers Special Edition ROM v1.2 to unlock my SX56, but I really need PPC2003 on my device.
How do I go about installing the new PPC2003 Rom? Will my device still unlocked if I do this?
Thanks for your help,
Therese
Re: How do I upgrade from Special Edition ROM v1.2 to PPC200
tperri said:
Hi,
I installed XDA-developers Special Edition ROM v1.2 to unlock my SX56, but I really need PPC2003 on my device.
How do I go about installing the new PPC2003 Rom? Will my device still unlocked if I do this?
Thanks for your help,
Therese
Click to expand...
Click to collapse
You can install it like aou install any other ROM.
Your device will be still unlocked...
HTH
Stefan
thank you!
I'll try that right away, then!
-Therese
I tried to run the instsall from Siemens and got an error me
I attached a gif oh the error
Re: I tried to run the instsall from Siemens and got an erro
the only way is to extract the nbf from the upgrade package and use sd-flash upgrade method. the original at&r siemens installer will always verify your xda rom b4 proceeding. another way would be flash back to at&t ppc2003 rom and the installer will work.
tperri said:
I attached a gif oh the error
Click to expand...
Click to collapse
I don't know how to what you suggested ...
Are there any detailed documents I can read about doing this?
Thanks!
Re: I don't know how to what you suggested ...
tperri said:
Are there any detailed documents I can read about doing this?
Thanks!
Click to expand...
Click to collapse
thats my question, anyone have some clues for a not-so savvy person to go from xda's rom to wm2003?
Thanks
hope this will help:
1. cook any wm2003 ROM from the kitchen at www.yorch.net and select the .nbf file type and download the resulted file which should be of 32 MB in size.
2. insert a 64 MB or higher SD card in your xda and use the OSImage tool in the XDAtools application to move this file to the SD card using the PC and the cradle.
3. go to the bootloader screen (power + soft reset). the xda will recognize the card content and it will be flashed.
4. do hard reset and you should get a new wm 2003 ROM by now
good luck
try this upgrade procedure
I got the same error ERROR 012: CHECK ERROR when running the PPC2003 upgrade from Siemens. So here what I did to get around this.
1. Download and install XDATools-Jeff. http://cuba.calyx.nl/~jsummers/XDA/XDAtools-Jeff.exe
2. To upgrade the ROM to A.30.09 ENG:
a. When install the upgrade package from Siemens, the install process created a folder named SX56 upgrade utility in your PC's Program Files folder.
b. You will find the ROM image in file NK.NBF in this path C:\Program Files\SX56 upgrade utility\english\NK.NBF
c. Use the OSImageTool from the XDAtools installed in step 1.
d. Specify Source: C:\Program Files\SX56 upgrade utility\english\NK.NBF
e. You will have 2 options for the Destination. The safest option will be download the image to the SD Memory Card, then install from the card. Or you can download the image directly to the XDA's internal ROM.
f. Folow the instruction on the screens. Should take about 5 minutes to download the image.
g. Cold boot after install is completed. Check your ROM version to make sure it is A.30.09 ENG
Note that the above procedure will only upgrade the ROM and not the Radio Stack. If you want to upgrade the Radio Stack, here is the procedure:
3. Upgrade to Radio Stack version A.33.02:
a. In the folder C:\Program Files\SX56 upgrade utility\english, you will find the following 4 files:
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUpgrade.exe
b. Use ActiveSync to copy these 4 files to your Pocket_PC's Windows directory.
c. You will then run the RSUpgrade on your Pocket PC. This will install the RS upgrade. Use the File Explorer to locate the RSUpgrade.exe and then click on this object to execute.
d. When the upgrade is completed, cold boot, then check for the Radio Version to make sure it is A.33.02.
Good luck and hope this help!
di we have to upgrade to the n radio lavel ?
I have an unlocked [email protected] Sx56 that i got form rogers.com an AT&T canada company... I personally use the unit with a Fido (microcell) plan
i did upgrade it using the instructions you posted here and it was a success...
Do i have to upgrade to the latest Radio level... now iam at A.20.10 or i would lose my GSM capabily as they say here at the forum..
thanks in advance
Ps. I noticed that my sesitivity bar grapg is allways at bar one i used to have 2 to 3 bars or is just the new graphices for ppc2003.
Thanks for the mini guide. I do have a n00b question though. What is the purpose of upgrading the Radio Stack?
Also, I'm here in the US with a T-Mobile PPC phone which I am selling (just didn't get that much use out of it). As incentive to buyers, I offered to unlock it, originally thinking that I could just use the XDAunlock.exe to do it, but it turns out the phone is a 3.14.40, I have no serial cable (only the usb cradle), and no SD card (though it would hurt to pick up one).
So is it still possible for me to unlock this phone, I guess using the XDA Special Edition ROM, without having a SD card? From reading some stuff on here, I think that's right, but if I ever need to go back to the original ROM, or upgrade to one of the WM2003 ROM, I need an SD card to use with the XDAtools?
If anyone can PM me with some general info on this stuff I would greatly appreciate it, as I really don't have time right now to scour the forums as much as I'd like to. Basically, you can see my device info in my profile, so if you can give tips on how to unlock, backup original ROM, and what I can/cannot do without a SD card, that would be wonderful. XDAUSER's post gives a good guide on upgrading to the WM2003 so I guess that's covered. Thanks in advance for helping out a n00b.
Diggin the help!
Followed the instructions from XDAUSER...works great! Thank you!
Acutally, I performed the proceedure using the Seimens 2002 update first. When I reset the device, it booted up fine...it didn't update the radio stack during the install, however.... I reset the device, it came up and created an active sync - then just ran the 2003 update utility. Worked GREAT, and updated the radio stack automagically.
p.s. I don't have a memory card, so just did it right to the device! (I was chewing my nails!)
I really appreciate this site, and the users who give great advice... :wink:
Thanks again!
Re: try this upgrade procedure
XDAUser, when I cold booted, my ROM version said 30.05 - is that ok?
How do I look at my radio stack version? Can I only see that when I cold boot?
Thanks for all your help!
Therese
XDAUSER said:
I got the same error ERROR 012: CHECK ERROR when running the PPC2003 upgrade from Siemens. So here what I did to get around this.
1. Download and install XDATools-Jeff. http://cuba.calyx.nl/~jsummers/XDA/XDAtools-Jeff.exe
2. To upgrade the ROM to A.30.09 ENG:
a. When install the upgrade package from Siemens, the install process created a folder named SX56 upgrade utility in your PC's Program Files folder.
b. You will find the ROM image in file NK.NBF in this path C:\Program Files\SX56 upgrade utility\english\NK.NBF
c. Use the OSImageTool from the XDAtools installed in step 1.
d. Specify Source: C:\Program Files\SX56 upgrade utility\english\NK.NBF
e. You will have 2 options for the Destination. The safest option will be download the image to the SD Memory Card, then install from the card. Or you can download the image directly to the XDA's internal ROM.
f. Folow the instruction on the screens. Should take about 5 minutes to download the image.
g. Cold boot after install is completed. Check your ROM version to make sure it is A.30.09 ENG
Note that the above procedure will only upgrade the ROM and not the Radio Stack. If you want to upgrade the Radio Stack, here is the procedure:
3. Upgrade to Radio Stack version A.33.02:
a. In the folder C:\Program Files\SX56 upgrade utility\english, you will find the following 4 files:
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUpgrade.exe
b. Use ActiveSync to copy these 4 files to your Pocket_PC's Windows directory.
c. You will then run the RSUpgrade on your Pocket PC. This will install the RS upgrade. Use the File Explorer to locate the RSUpgrade.exe and then click on this object to execute.
d. When the upgrade is completed, cold boot, then check for the Radio Version to make sure it is A.33.02.
Good luck and hope this help!
Click to expand...
Click to collapse
Upgrading Radio Stack
I'm new to the Pocket PC Phone device so not quite sure what all the enhancements goes into RS A.33.02. I heard that there is some GPRS enhancements for continous data connection. This is great if you use the XDA for data such as internet access. So far, I cannot find any official documentation from neither Siemens nor AT&T about this new RS???
My RS was at version A.20.10 and it was working fine with Cingular SIM while roaming on other networks such as T-Mobile or ATT. But as soon as I'm returning to the local service area, I got no signal on my XDA. I guess it is because I'm in a small town and their cellular network has not yet been upgraded. I contacted Cingular Technical Support but they refused to help me since I don't use their equipment. This is kindda sad because I'm working in this small town 80% of my time.
I then try to upgrade RS to the newest version A.33.02 from Siemens in hoping that it will fix the problem, but still no signal. I read somewhere in this forum that I should try to upgrad to T-Mobile RS, but when I try to download the T-Mobile upgrade file from Yorch.net, I cannot unzip the file because of its password protection. I tried to download the RS upgrade directly from T-Mobile, but I need to have a valid T-Mobile phone number (which I don't have) in order to download.
So for now, I have to use a Cingular cell phone while I'm in this small town and carry both a cell phone and my XDA. When I'm travelling outside of this local service area (roaming), I switch the SIM card. It such a pain and I hope I don't wear out the SIM card from switching it back/forth.
If the current RS is working for you, then don't upgrade it. Unless you know the new RS will give you the functionality that you will need. If you decided to upgrade, make sure you save a copy of the previous RS version in case you need to go back. Use the RS upgrade procedure as a guide.
Good Luck.
Re: Upgrading Radio Stack
I have Cingular and can't get their SIM card to work in my device - how did you do that? I was going to go out and get a T Mobile SIM instead but if I can get the Cingular to work, I won't.
Is it the radio stack version that makes using the Cingular SIM possible? If so, that is the radio stack I need to get.
Can you help me with getting that one?
TY!!!
XDAUSER said:
I'm new to the Pocket PC Phone device so not quite sure what all the enhancements goes into RS A.33.02. I heard that there is some GPRS enhancements for continous data connection. This is great if you use the XDA for data such as internet access. So far, I cannot find any official documentation from neither Siemens nor AT&T about this new RS???
My RS was at version A.20.10 and it was working fine with Cingular SIM while roaming on other networks such as T-Mobile or ATT. But as soon as I'm returning to the local service area, I got no signal on my XDA. I guess it is because I'm in a small town and their cellular network has not yet been upgraded. I contacted Cingular Technical Support but they refused to help me since I don't use their equipment. This is kindda sad because I'm working in this small town 80% of my time.
I then try to upgrade RS to the newest version A.33.02 from Siemens in hoping that it will fix the problem, but still no signal. I read somewhere in this forum that I should try to upgrad to T-Mobile RS, but when I try to download the T-Mobile upgrade file from Yorch.net, I cannot unzip the file because of its password protection. I tried to download the RS upgrade directly from T-Mobile, but I need to have a valid T-Mobile phone number (which I don't have) in order to download.
So for now, I have to use a Cingular cell phone while I'm in this small town and carry both a cell phone and my XDA. When I'm travelling outside of this local service area (roaming), I switch the SIM card. It such a pain and I hope I don't wear out the SIM card from switching it back/forth.
If the current RS is working for you, then don't upgrade it. Unless you know the new RS will give you the functionality that you will need. If you decided to upgrade, make sure you save a copy of the previous RS version in case you need to go back. Use the RS upgrade procedure as a guide.
Good Luck.
Click to expand...
Click to collapse
quick side question: where can I find the T-mobie final beta of WM2003? Did a search of the forum and can't find any info.
Also, if I use the Siemens WM2003 upgrade, then is there info I have to enter in by hand to get the phone to continue to connect to the T-mobile network? Would it just be the same values that were programmed in my phone prior to upgrading? Thx.
Re: try this upgrade procedure
tperri said:
XDAUser, when I cold booted, my ROM version said 30.05 - is that ok?
How do I look at my radio stack version? Can I only see that when I cold boot?
Thanks for all your help!
Therese
Click to expand...
Click to collapse
If you downloaded and install the upgrade from Siemens, then you should get the ROM A.30.09 ENG image. I downloaded the english version here:
http://www.my-siemens.com/MySiemens...D%2FHD%2FSX56POCKETPCPHONE%2Fdanda%2F,00.html
To check your current ROM/RS version:
Start>Settings, select System tab, click Device Information.
Re: try this upgrade procedure
Ok here is what I have in my system settings:
ROM version A.30.05 ENG
ROM date 11/17/03
Radio version 6.12
Protocol Version 324e4
I didn't get version 30.09 when I installed from this link below, I got the 30.05.
What is the radio stack you are on that allows you to use Cingular? Do you know how I can upgrade to that radio stack?
XDAUSER said:
tperri said:
XDAUser, when I cold booted, my ROM version said 30.05 - is that ok?
How do I look at my radio stack version? Can I only see that when I cold boot?
Thanks for all your help!
Therese
Click to expand...
Click to collapse
If you downloaded and install the upgrade from Siemens, then you should get the ROM A.30.09 ENG image. I downloaded the english version here:
http://www.my-siemens.com/MySiemens...D%2FHD%2FSX56POCKETPCPHONE%2Fdanda%2F,00.html
To check your current ROM/RS version:
Start>Settings, select System tab, click Device Information.
Click to expand...
Click to collapse
Re: try this upgrade procedure
I don't understand why your current ROM is not at A.30.09. Did you try to run any others ROM upgrade beside the one from Siemens? My thinking is that if you run another ROM upgrade, the file NK.NBF may got replaced. Did you try manual upgrade procedure immediately after running the Siemens' upgrade?
I knew the RS version A.20.10 will work with Cingular in roaming mode. I tried this RS version while I'm in Houston Texas, and also in Indianapolis Indiana. But when I arrived at my office in a small town 60 miles from Indianapolis, which is the Cingular local service where I got my cell phone, my XDA stopped working. I then upgrade RS to A.33.02 and still no luck.
I will be back to Houston in Feb 19, then will test the XDA with RS A.33.02.
To get the the RS A.20.10, go to www.yorch.net, click Upgrades, then select A.20.10 to download.
Regards
tperri said:
Ok here is what I have in my system settings:
ROM version A.30.05 ENG
ROM date 11/17/03
Radio version 6.12
Protocol Version 324e4
I didn't get version 30.09 when I installed from this link below, I got the 30.05.
What is the radio stack you are on that allows you to use Cingular? Do you know how I can upgrade to that radio stack?
Click to expand...
Click to collapse
Re: try this upgrade procedure
What I did was download from Siemens and it wouldn't let me install because I was using the XDA Special Edition ROM, so I installed that OSIMage tool and let that upgrade my XDA. That is all I did. Was I supposed to run another ROM upgrade besides that?
I'll wait on getting that new radio stack until I hear back from you about the other part
Thanks so much!!! You are great.
XDAUSER said:
I don't understand why your current ROM is not at A.30.09. Did you try to run any others ROM upgrade beside the one from Siemens? My thinking is that if you run another ROM upgrade, the file NK.NBF may got replaced. Did you try manual upgrade procedure immediately after running the Siemens' upgrade?
I knew the RS version A.20.10 will work with Cingular in roaming mode. I tried this RS version while I'm in Houston Texas, and also in Indianapolis Indiana. But when I arrived at my office in a small town 60 miles from Indianapolis, which is the Cingular local service where I got my cell phone, my XDA stopped working. I then upgrade RS to A.33.02 and still no luck.
I will be back to Houston in Feb 19, then will test the XDA with RS A.33.02.
To get the the RS A.20.10, go to www.yorch.net, click Upgrades, then select A.20.10 to download.
Regards
tperri said:
Ok here is what I have in my system settings:
ROM version A.30.05 ENG
ROM date 11/17/03
Radio version 6.12
Protocol Version 324e4
I didn't get version 30.09 when I installed from this link below, I got the 30.05.
What is the radio stack you are on that allows you to use Cingular? Do you know how I can upgrade to that radio stack?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
After alot of *****ing and customer service that did not have a clue that the supplied the SX56 and software. I finally found some intelligent life at Rogers and was provided this link to the Rogers Mobile 2003 upgrade for those Canadians that still need it.
Here is the required link >>>>>
http://downloads.rogers.com/wireless/products/phones/siemens/Siemens_SX56_Software_Upgrade.exe <<<<
ROM Version: 30.07 ENG
ROM Date: 05/04/04
Radio Version: A.33.03
Protocol Version: 1.3.3
Model No.: PW10B1
Additionaly , please find screen shots enclosed to assist you through the install.
<<SX56 PPC 2003 Upgrade.doc>>
Thanks... but a problem
Thanks for this link. I was successfully able to download this update from the site: however.... the software will not update my phone
I am using the phone on rogers, but this phone is one that i purchased that was originall At&T from the USA.
I downloaded a ROM from here, it is a PPC2002 version, with a whole bunch of toys, looks cooked, but not by me. I used this to unlock the radio.
I would like to upgrade to 2003. This image will not load and i dont know whether i should try cooking another one and loading it, or if there is a way to get this one on there. Having an OS endorsed by my carrier is somewhat comforting, but i dont know if this is at all legitimate.
I get the following error after clicking the first NEXT in the upgrade process:
ERROR 012 CHECK ERROR
The rom image that you are trying to upgrade is not compatible with your PPC phone. Please compare the devidce and upgrade information below
Current device info:
MODEL PW10A1
ROM 3.17
Your Upgraded Image Info:
MODEL PW10B1
Rom R.30
Please download the compatible utility and try again.
Perhaps i am out of luck?
Thanks
Ian
Trick
The trick I used to get around this, is start the installer you downloaded, it will create a directory x:\program files\SX56 upgrade utility. Copy all the files from this directory to a safe place, then cancel the installer.
In there there will be a NK.NBF file. Use the XDATool OSImage tool to make a SD card image, then on the XDA hold down the power button and soft reset to then do the install of the new ROM image. Covered elsewhere on this site many times...
After that, copy the RSU*.* and monitor*.* files from the above directory to the devices \windows directory and run RSupgrade.exe to upgrade the radio stack.
Worked for me. :lol:
Meathooks.
Questions
I apologize if this seems like stupid questions but: What is the difference, if any, between PPC 2003 and WM 2003?
I downloaded and installed (or attempted to anyway) the 2003 update from the Siemens website - the one for Rogers users. I, unknowing the problems other have had, attempted to install straight from the .exe file. The radio stack updated sucessfully but the unit hung when attempting to update the ROM. The program asked for a soft-reset and to run the installation program again. When I did this the unit would not power on and my computer didn't recognize that the SX56 was even attached... anyhow, couldn't get anything to work after numerous attempts. The people at Siemens told me to send the unit back to Rogers. I did. Rogers just forwards the unit to Siemens anyway and now I've been without it for 2 weeks. argh.... When i do get the unit back (which I'm starting to think may be never!) i will try again with the recommended use of XDAtools instead of straight from the EXE file. Even though I won't go through that again i'd like to know if anyone else has had this problem and if they have found the reason for it and a way to install straight from the EXE file without any problems.
Thanks,
Sean
Difference
No difference bwn the two, the proper term is Windows Mobile 2003.
Meathooks.
Re: Thanks... but a problem
bimmian said:
Thanks for this link. I was successfully able to download this update from the site: however.... the software will not update my phone
Click to expand...
Click to collapse
No prob for the upgrade, sorry I did not get back to you earlier (out of the loop for a while), but Meathooks is right, this is the way I had to go as well. Worked great and have not found any bugs so far.
I have another XDA as well. THis one i actually bought from Rogers (for $1000) before knowing that these can be had on ebay for $200 - so i got a second one (my ATT phone) when my cat chewed the antenna on my Rogers phone.
The rogers took the update no problem, straight from the EXE file as in the attached WORD document above.
The rom on the rogers phone was R.2???? something before the update.
Why are some of the ROM versions called R.2 or R.3 and some are just called 3.17 or whatnot?
As for my ATT (primary) phone, does anyone recommend using the rogers provided update over using the one i cooked yesterday or visa versa?
Thanks
Ian