I've noticed this evening that my XDA mini s has developed what appear to be 3 small 'lines' on the LCD (not on the top of the screen), about the size of the tip of my stylus, on the left hand side of the screen, more or less in line with the left hand speaker grill. They appear lighter than the rest of the LCD.
They aren't really noticeable until viewed on a plain dark background, but I'm sure they weren't there on day one....
Anyone else had this problem?
Si.
Sounds like a warranty issue ...
At the moment, they are bearable - after all, it's not going to remain pristine....
Si.
Burnt in images?
I've taken a closer look....
It appears that what I can see - very faintly, are burnt in images of the today screen Icons.....
WTF - on a two week old LCD?
Si.
Re: Burnt in images?
devros said:
WTF - on a two week old LCD?
Click to expand...
Click to collapse
These devices aren't hand-made. When the production robots are on bad mood you get fault device that's why companies offer warranty in the first place.
But is it possible to burn-in these screens? Anyone know about this?
Joe
Related
Just got the Hero today. I noticed there is a slight gap where the screen meets the casing.It just about doesn't meet the top, infact I can just about see a component through it. Is yours like that?
Same here.. I can see a bronze looking component to the right of the speaker vent
thats it! Maybe there are all like that. Bit worried its going to be a problem with dust in the screen. Bit naff for a 400 quid phone. Great otherwise. Worth sending back for a replacement? what do you think?
The one I had seemed to have a 'dimple' by the power symbol. As if dust had got under the final finish, another iffy build issue methinks.
Are all yours Orange network branded ones? I've got the white unlocked one and its absolutly fine.
Could somebody post some pictures of these gaps? That's very concerning
A portion of the Hero's on Orange do have that gap, I've noticed. Thanks for making this topic, it will help if it happens again. As it's a customer affecting issue which will cause returns.
Thanks Acelister,
Not seen a post of yours since the Touch HD release
Mine has that gap at the top where the screen meets the casing - its not bothered me until now and the pocket dust is building up. I'll check the white hero tomorrow and see the difference, if so different I will return the device as I am still within the 7 days as I received my device last wednesday.
I'll post an image tomorrow when back in the office.
Noticed it on my T-Mobile one on day one, yesterday. Massive bit of dust stuck in the gap. Managed to get it out, but when you think that most cases are gonna be less effective cos of the chin, this could be a big deal :-(
I think mine will be getting 7'dayed.
The gap ain't the only reason
Kev
What are the other reasons?
Remember its 7 Working days excluding the day of delivery don't let them tell you otherwise as some try it on
i cant see a gap anywhere ...lol where am i supposed to be looking ....mines on orange
what !!!
the same problem on htc diamond 2 that dust inside the display screen !
what wrong with HTC
Aqrab said:
what !!!
the same problem on htc diamond 2 that dust inside the display screen !
what wrong with HTC
Click to expand...
Click to collapse
Its also on the Touch Pro 2. Maybe they have opened a new warehouse for manufacturing in a dusty place?
menov321 said:
i cant see a gap anywhere ...lol where am i supposed to be looking ....mines on orange
Click to expand...
Click to collapse
between your ears
Seriously, between the HTC logo and the ear piece
Mine doesn't have a gap any larger at the top than any of the other edges.
I'm using a black T-Mobile Hero - given the "custom" colours, it makes me wonder if there is an issue here with specific colours.
Regards,
Dave
foxmeister said:
Mine doesn't have a gap any larger at the top than any of the other edges.
I'm using a black T-Mobile Hero - given the "custom" colours, it makes me wonder if there is an issue here with specific colours.
Regards,
Dave
Click to expand...
Click to collapse
Good point... Is it just the white models then? mine is white and i can see a lovery copper looking componenet through the gap.
mwatson said:
Good point... Is it just the white models then? mine is white and i can see a lovery copper looking componenet through the gap.
Click to expand...
Click to collapse
Mine is white and I can't see anything
foxmeister said:
Mine doesn't have a gap any larger at the top than any of the other edges.
Click to expand...
Click to collapse
Same here....the gap seems equal on all sides. Some pictures would be helpful to see what it looks like.
Mines is the graphite version from Orange.
fl4r3 said:
Same here....the gap seems equal on all sides. Some pictures would be helpful to see what it looks like.
Mines is the graphite version from Orange.
Click to expand...
Click to collapse
You have a good one. When you look at the handset straight-on, you can see a gap that isn't fully filled with the rubber stuff. In that you can see two or three copper squares. I thought it was maybe just with the Graphite version, but if it's on the White version too, then it's obviously a build issue. The tolerances must be set wrong on the machines.
Acelister said:
You have a good one. When you look at the handset straight-on, you can see a gap that isn't fully filled with the rubber stuff. In that you can see two or three copper squares. I thought it was maybe just with the Graphite version, but if it's on the White version too, then it's obviously a build issue. The tolerances must be set wrong on the machines.
Click to expand...
Click to collapse
Guess I am lucky
Mind you, if I look EXTREMELY closely at the rubber gap on the top part of the screen, I can just about see some copper part shine in the light on the left. But the gap is extremely small and you have to really look for it to reflect the light. The phones with the gap probably do have tolerance issues on the machines since some have it and some don't.
This is not about the tiny silver dots you can see in certain angles when there is glare on the screen. I sold my 8gb Nexus 4 and bought a 16Gb but the new phone that just arrived has a bunch of vertical lines with 3 small horizontal lines which I assume is the digitizer and it is a self capacitance circuit. The problem is that it is visible ALL the time, from every angle even in dark rooms and while the screen is on. My old 8Gb did not have this problem (just the silver dots), is this enough for an RMA? I'm trying to get used to it but it is really distracting. Here are some pictures:
I would RMA that, that shouldn't look like that.
Sent from my EVO using Tapatalk 2
Yeah, I'm going to call google and see what they say. Sucks though, the screen had great colors, FAST binned, and running stock got me a score of 19k in Antutu.
I can see that on mine too, it's the LCD matrix. Was similar on my One X as well before I sold it. Doesn't bother me one bit
It's the digitizer. Nothing to worry about.
However, i don't see them when the screen is on.
Nuu~ said:
It's the digitizer. Nothing to worry about.
However, i don't see them when the screen is on.
Click to expand...
Click to collapse
I can see it if its a dark sceen, like if I pull down the notifications bar. What kills me is that my old rev10 Nexus 4 doesn't have that.
I emailed Google the picures of the screen and they said that it was defective and setup an RMA. Just wanted to post the result in case anybody has something similar. Thanks everybody.
I have that too, but it doesn't bother me since I only see it on some angles with the screen off. Apparently, from what I understood, it is actually a sign that you have a newer type display without the 'washed out colors' issue.
Please post pics of your replacement N4 when you get it to see if it is any different (I'm somewhat sceptical), since I think many people have this issue.
meranto said:
I have that too, but it doesn't bother me since I only see it on some angles with the screen off. Apparently, from what I understood, it is actually a sign that you have a newer type display without the 'washed out colors' issue.
Please post pics of your replacement N4 when you get it to see if it is any different (I'm somewhat sceptical), since I think many people have this issue.
Click to expand...
Click to collapse
The replacement hasn't shipped yet, will let you know when I get it but this is most certainly a defective screen, the two phones side by side in the first post are both rev11 301k and both arrived about a week apart in february. One has the digitizer marks that are barely visible, only from certain angles(doesnt even show up in the pictures) and when the screen is off, the other one I can see them from 4 feet away. I have to agree on the colors though, the 301k has much better colors compared to my old 211k.
meranto said:
I have that too, but it doesn't bother me since I only see it on some angles with the screen off. Apparently, from what I understood, it is actually a sign that you have a newer type display without the 'washed out colors' issue.
Please post pics of your replacement N4 when you get it to see if it is any different (I'm somewhat sceptical), since I think many people have this issue.
Click to expand...
Click to collapse
Replacement just arrived, the digitizer is MUCH less visible. See pic attached.
Very interesting. Out of the blue, when I turned my phone on this afternoon I started seeing top to bottom vertical banding. I've noticed that it changes depending on what colors are on the screen, especially in the top/status bar. They are mostly white/gray, but there is a little blue and red.
The phone is only 8 days old, so I'm planning on bringing it back to Sprint on Monday morning. I'm quite sure it's a hardware issue, but I haven't seen anyone else posting about it with this device. I only wanted to see if anyone else had this experience so that I could decide whether it was a design defect that would cause me to reconsider my choice of this phone.
Peace.
have you drop the phone? coz mine develop a horizontal one on the top display .. drop from about 1 feet from the ground
fortunately for me, after i reboot it, the issue gone for good
zekurosu said:
have you drop the phone? coz mine develop a horizontal one on the top display .. drop from about 1 feet from the ground
fortunately for me, after i reboot it, the issue gone for good
Click to expand...
Click to collapse
No drops. Phone was in an OtterBox Defender.
Didn't go away after multiple reboots.
Brought it in to a Sprint store and they ordered me a replacement.
Glad I hadn't rooted it yet.
i notice these lines to, its more of a grid that i see, vertical and horizontal lines, i believe its supposed to make the phone more responsive to the touch of our fingers, making it react faster than other android phones...just an assumption
Trident said:
Very interesting. Out of the blue, when I turned my phone on this afternoon I started seeing top to bottom vertical banding. I've noticed that it changes depending on what colors are on the screen, especially in the top/status bar. They are mostly white/gray, but there is a little blue and red.
The phone is only 8 days old, so I'm planning on bringing it back to Sprint on Monday morning. I'm quite sure it's a hardware issue, but I haven't seen anyone else posting about it with this device. I only wanted to see if anyone else had this experience so that I could decide whether it was a design defect that would cause me to reconsider my choice of this phone.
Peace.
Click to expand...
Click to collapse
I had this happen after I had my screen replaced (cracked screen). Local repair guy replaced the screen, seemed to be working fine. I took it home and got these same vertical white streaks. Took it back to him, he found some kind of lose connector or board somewhere below the screen and had to apply some adhesive. I'm picking it up today to see if the issue is truly fixed.
Mine showed after i took the phone to capture images under direct sunlight
WhiteZero said:
I had this happen after I had my screen replaced (cracked screen). Local repair guy replaced the screen, seemed to be working fine. I took it home and got these same vertical white streaks. Took it back to him, he found some kind of lose connector or board somewhere below the screen and had to apply some adhesive. I'm picking it up today to see if the issue is truly fixed.
Click to expand...
Click to collapse
Did it end up working... i dropped mine and had the screen replaced then it showed white lines and then the display just stopped working (Its just black) and i can hear the sounds it makes but i cant see anything so i need some help
cocook2000 said:
Did it end up working... i dropped mine and had the screen replaced then it showed white lines and then the display just stopped working (Its just black) and i can hear the sounds it makes but i cant see anything so i need some help
Click to expand...
Click to collapse
Yes, I havent had a problem since.
Trident said:
Very interesting. Out of the blue, when I turned my phone on this afternoon I started seeing top to bottom vertical banding. I've noticed that it changes depending on what colors are on the screen, especially in the top/status bar. They are mostly white/gray, but there is a little blue and red.
The phone is only 8 days old, so I'm planning on bringing it back to Sprint on Monday morning. I'm quite sure it's a hardware issue, but I haven't seen anyone else posting about it with this device. I only wanted to see if anyone else had this experience so that I could decide whether it was a design defect that would cause me to reconsider my choice of this phone.
Peace.
Click to expand...
Click to collapse
I have this exact issue, only difference is that the screen sometimes goes black. I noticed that when it does of I press the lower part of the screen it will display the white grid briefly then go black again. I have tried holding down the circuitry near the connector at the lower part of the screen down but to no avail. Please help.
I think I've experienced the same with my phone after a DIY display replacement. I put some electrical tape between the display connectors and the radio cable. Make sure that the tape is holding all the display connectors in place.
Hi,
Dropping my phone was the worst thing that could happen with my phone.
I found someone who would do the screen replacement and after nearly two months he finally returned the phone two me.
At first glance it seemed ok but closer inspection have shown me that:
- the panel used was JDI instead of LGD so a japanese panel instead of the 'original' LG
- serious screen bleed contouring the whole screen
- highlights on the screen, points in the screen where I can clearly see the backlight being brighter than everywhere else
- luminosity is lower than the original.
The last two points are very annoying. I compared my phone with a phone displayed in a shop and I see that the screen on the shop's phone is brighter that mine, even without adaptive brightness and @ 100% luminosity.
Could this be due to different panel manufacturer (JDI instead of LGD)?
The screen bleed could be due to the screen being badly glued but I am not sure...
But the bright speckels are annoying also. In bright areas this is very much noticable, a white picture shows two small areas brighter which indicates to me that the back of the panel has something behind that 'pushes', hard to explain.
Anybody had similar issues or had his screen repaired?
You can see my issues in the attached screenshots...
laboratik said:
Hi,
Dropping my phone was the worst thing that could happen with my phone.
I found someone who would do the screen replacement and after nearly two months he finally returned the phone two me.
At first glance it seemed ok but closer inspection have shown me that:
- the panel used was JDI instead of LGD so a japanese panel instead of the 'original' LG
- serious screen bleed contouring the whole screen
- highlights on the screen, points in the screen where I can clearly see the backlight being brighter than everywhere else
- luminosity is lower than the original.
The last two points are very annoying. I compared my phone with a phone displayed in a shop and I see that the screen on the shop's phone is brighter that mine, even without adaptive brightness and @ 100% luminosity.
Could this be due to different panel manufacturer (JDI instead of LGD)?
The screen bleed could be due to the screen being badly glued but I am not sure...
But the bright speckels are annoying also. In bright areas this is very much noticable, a white picture shows two small areas brighter which indicates to me that the back of the panel has something behind that 'pushes', hard to explain.
Anybody had similar issues or had his screen repaired?
You can see my issues in the attached screenshots...
Click to expand...
Click to collapse
I don't think your issues is the panel type, i replaced mine and got a JDI from eBay. I don't notice any difference from my old one, which was not JDI. I would say you just got a poor screen. Not the fault of the installer either, i would try to get hold of the screen seller, or just accept the loss and replace it again.
Sent from my LG-LS980 using XDA Free mobile app
scottdanpor said:
I don't think your issues is the panel type, i replaced mine and got a JDI from eBay. I don't notice any difference from my old one, which was not JDI. I would say you just got a poor screen. Not the fault of the installer either, i would try to get hold of the screen seller, or just accept the loss and replace it again.
Sent from my LG-LS980 using XDA Free mobile app
Click to expand...
Click to collapse
I can agree that the panel type is not the culprit but the screen bleed is definitely the installers fault.
I am not very happy replacing it again as the total cost would mean that I could have bought a new phone for the same price...
My feeling is that the seller of the screen has delivered a used screen and damaged the silver back of the panel by removing it from the old device (the bright highlights could be from a prying tool used while recuperating the screen.). Too bad , lesson learned = do not drop the phone as the screen shatters very easily and when repairing, find a reliable repairsman...
Accept the loss seems to be the only option in this case...
Maybe I will have to disassemble/assemble the phone myself and do with with extra love and care and sense of detail....
laboratik said:
I can agree that the panel type is not the culprit but the screen bleed is definitely the installers fault.
I am not very happy replacing it again as the total cost would mean that I could have bought a new phone for the same price...
My feeling is that the seller of the screen has delivered a used screen and damaged the silver back of the panel by removing it from the old device (the bright highlights could be from a prying tool used while recuperating the screen.). Too bad , lesson learned = do not drop the phone as the screen shatters very easily and when repairing, find a reliable repairsman...
Accept the loss seems to be the only option in this case...
Maybe I will have to disassemble/assemble the phone myself and do with with extra love and care and sense of detail....
Click to expand...
Click to collapse
Since the digitizer comes glued to the glass I'm more inclined to blame the screen/seller than the installer. But you know the saying... "If you want it done right...". All the best on getting it sorted and working properly.
So I have the edge since the 11th now. And every time I have the feeling that the screen is centered to the right side, I notice it extra with a case. As the area between the bezel and the screen is larger on the left side.
This afternoon I looked with an magnifying glass and indeed saw that this was indeed the situation. It is about 0.1 mm or so but oh so annoying. Luckily I can exchange it, however there will be only phones I stock around the 30th. Keeping mine thill then.
Are there others with the same issue?
The attached version is not my phone, but just an example to explain.
To better understand what i mean I attached a picture. I have the black version but you could see it as the black line on the right side of the phone is thinner than on de left, so the screen is essentially to far to the right..
not the best picture for judging...
But I know what you are talking, I have seen a few devices now and all of them were different in terms of screen quality and alignment!
for me, the worst problem is the uneven contrast (darker sides) on most of the screens. i own 3 devices now and all of them have display flaws. two suffer from a yellow tint when tilting, the other screen has a slightly darker left side... :|
TML1504 said:
not the best picture for judging...
But I know what you are talking, I have seen a few devices now and all of them were different in terms of screen quality and alignment!
for me, the worst problem is the uneven contrast (darker sides) on most of the screens. i own 3 devices now and all of them have display flaws. two suffer from a yellow tint when tilting, the other screen has a slightly darker left side... :|
Click to expand...
Click to collapse
I know. When my S6 comes back from warranty repairs I will try to make a picture. The S5 I have laying around can't focus clearly enough.
Well I hope I won't have a replacement with tint issues or such. Because my screen is, aside of the alignment, pretty perfect. Maybe I'm a bit nitpicky but I think that's justified with these kind of price tags.
I still have till the 30th to get used to it or exchange it. An order for a replacement has been made.
People complain about issues of screen color when tilting the device.. When are u ever tilting the device? U should be looking at it dead on anyways.
Honestly I don't see anything from ur picture, maybe ur just crazy.. If it is a little little misaligned who cares.. It's the curve part anyways..
Sent from my XT1575 using Tapatalk
StreetkillnHD said:
People complain about issues of screen color when tilting the device.. When are u ever tilting the device? U should be looking at it dead on anyways.
Honestly I don't see anything from ur picture, maybe ur just crazy.. If it is a little little misaligned who cares.. It's the curve part anyways..
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
The picture I used is just to explain what i mean with the black lines on my phone. Imagine that picture with no black line on the right of the phone, so the screen blends in with the white. And a bigger black line on the left.
That's what i have, but my phone is black so i cant put it on a picture to explain it.
I can really only tell in a dark room, but there is ever-so-slight light leakage where the glass meets the metal on the bottom of my S7 Edge. I see the slight leakage on the bottom-left and bottom-right. Doesn't bother me much, maybe a little, but my experience with smartphones is you'll be lucky to find one with absolutely flawless everything including screen alignment. It's often not worth exchanging for a new one, which may have other issues. Plus there's the whole issue of setting the phone up from scratch again. My device seems to be working fine (this is my 5th day with it) so far, so I won't be exchanging it.
After reading this thread I checked mine and its is misaligned like you described. I then went to Samsung and they checked and said that its normal. Now that I see it, its driving me crazy.
Sent from my SM-G935F using Tapatalk
Same
Same **** with me. My screen is also misaligned and its driving me nuts with this phone price i dont know what to do about it. I have s7 edge btw same **** all over with the s6edge. I really didnt notice it when using the phone. I noticed it when im checking out the phone looking how pretty it is then when i turned on the screen i noticed that the left side of my screen has a thinner black bezel and when i look on the right it has a little bitty gap.