where do we need that blink if phone is working properly?
if there is message or low bat, bt or wifi connection, thats nice to know, but no need for green light to show that there is power.
so, how to disable that? registry hack or something i suppose.
thanks,
first time posting here...
My flashing light seems to do what it want's. If it flashes the right thing at the right time it's just coincidence...
Mat.. I think he's referring to e.g. the right-side green LED flash that pops up every 2 seconds when the radio is on. It can be a wee bit annoying when you've got the thing on your nightstand - some people simply can't fall asleep ( even though they should close their eyes, after which they can't see it anymore )
What does the orange light mean? It seems to change to orange whenever it wants!
afaik...
Left LED:
Green, Flashing slow (2s): WiFi on
Blue, Flashing slow (2s): BlueTooth on
Right LED
Red, Flashing quickly (1s): Battery nearly empty
Green, Flashing slow (2s): Radio on
Green, On: Fully recharged
Amber (orange), On: Recharging
Amber (orange), Flashing quickly (1s): Notifications (Alarm, SMS, MMS, etc. depending on settings)
Related
Can you please tell me how many LED's are on Trinity and what kind of missing calls, messages notifications are present, hopefuly via LED which rapidly changing colors?
In the manual it says:
Left LED:
This LED shows the following:
• A blinking Blue light for Bluetooth system
notification of powered-up and ready to transmit
radio frequency signal.
• A blinking Green light for Wi-Fi status.
• When both Bluetooth and Wi-Fi are enabled, their
lights blink alternately.
Right LED:
This (bi-color) LED shows Green and Amber lights
for UMTS/GSM standby, UMTS/GSM message,
UMTS/GSM network status, notification, and battery
charging status.
Click to expand...
Click to collapse
so, when I miss phonecall or sms this right LED will notify me by changing lights all the time until I confirm event, how visible it is? It is very important to me that just by looking at phone I know I have something to check.
Took me a while to check, but here it is:
When charging, the right LED will show a steady amber light, it turns steady green when fully charged. When not charging, the right LED will blink green to indicate GSM reception.
When you have recived a sms, or a call, which you didn't answer, the right LED will, whether it is charging or not, start to blink amber until you have read the sms, or have seen the incoming number.
So in short, blinking amber right LED is either a missed call, or sms.(probably mms too)
That's it, I'm planing to buy this wonder and your input is very helpful, thank you very much!
i just purchased a touch hd and was wondering why the led indicator lights are not flashing?
i notice that there is an led indicator light on the power button and also next to the earpiece; from my old tytn II, the led indicator flashed amber for service and also blue for bluetooth.
i currently have service and my bluetooth is on, but i don't have any flashing indicators.
is there a setting to turn them on?
This is not a led is a light sensor.
akhoury said:
i just purchased a touch hd and was wondering why the led indicator lights are not flashing?
i notice that there is an led indicator light on the power button and also next to the earpiece; from my old tytn II, the led indicator flashed amber for service and also blue for bluetooth.
i currently have service and my bluetooth is on, but i don't have any flashing indicators.
is there a setting to turn them on?
Click to expand...
Click to collapse
The one next to the earpiece is a light sensor.
The other flashes green for missed event, stays green for finished charging, amber for charging, and flashes amber if you're low on power.
Is there a registry hack to get the "old" LED behaviour? (Cell locked in=Flashing green, Notification = flashing yellow, Bluetooth = flashing blue etc.)
I don't think there is a solution for this (yet).
in anycase, it is only a bi-colour LED - ie Amber and Green - no blue.
I have the same problem: my green led flashes for missed calls but not for incoming messages.....
Can you help me?
Thanx a lot
Dani3l3 said:
I have the same problem: my green led flashes for missed calls but not for incoming messages.....
Can you help me?
Thanx a lot
Click to expand...
Click to collapse
Start, Settings, Personal, Sounds & Notifications, Notifications, Messaging: New text message, Flash light for....
That LED is so tiny and dim I find it's easier to just hit the power button and look at my screen to see if I have missed calls/texts/etc.
well theorticall you woud have to seek out the powr button with eyes first
kdding
Thanks.....
My HD have an Italian ROM and the translation is poor...... nothing about "led blink"
I've resolved checking a flag translated as "turn on screen if incoming message".........
I think i'll try a WWE rom.....
Thanx a lot
dani, that is the correct option. Italian translations suck
Hi!
I don't know if this is by design or it is a problem with my device but I found very strange that there is no led light to show me if I have signal or not or if there is an event. The led from the power button goes orange when I charge my phone and continuously green when fully charged. But when the device is disconnected from power source the led just goes off and stays like that even if there is a missing call or an SMS. It at least should blink green to show that there is signal. It is the same for you? If yes, is there a way to turn on the led?
I am using Dutty's ROM 2.1.
Thanks!
It does...
Change your sounds and notifications settings.
Sorry to insist but can you be more speciffic? What should I change there? For intance on the Missed Call I have selected "Display message on screen" and "Flash light for 30 minutes".
I am also using PhoneAlarm and this one is set to flash the led for most of the events. But it does not work either.
Thanks!
yes, you change to "flash for xx secs" for xx event
but the rest of the time it is off
its only 2 colour, ornage for charging and green flashing for events... .no blue for BT or steady on etc for signal
As I said, it is already set like that.
The LED is located on the power button.
Buggered setting i guess, try turning off the flash setting then try a reset and then turn back on again,
I will do that, thanks!
jonajuna said:
yes, you change to "flash for xx secs" for xx event
but the rest of the time it is off
its only 2 colour, ornage for charging and green flashing for events... .no blue for BT or steady on etc for signal
Click to expand...
Click to collapse
Does HD has blue LED for BT ?? mine doesn't shows blue LED for Bluetooth ( Only Green and Orange LED found. HTC original ROM 1.19 something). Am I missing something or there is NO blue LED like Elf/in
Can anyone confirm / clarify ?
Thanks ahead
Just tiny, faint green/amber LED. No Blue.
sschrupp said:
Just tiny, faint green/amber LED. No Blue.
Click to expand...
Click to collapse
Thanks for the reply. Blue LED would be much appreciated though. ( it looks cool on my Elfin)
The LED has the following:
1. Green when fully charged and while on a charger
2. Amber when charging and not fully charged
3. Flashing when a new SMS, email or missed call.
My question is: how can I set my TD2 to flash to indicate a new SMS, email or missed call at the same time as charging? It would seem that the charging indication takes priority over the flashing.... I want the flashing to take priority.
Does anyone know a solution to this please?
I would like the same.It will be great with no missing call or sms until you unplug your phone...and what about the second light next right to the phone? thanks a lot
fs1978 said:
I would like the same.It will be great with no missing call or sms until you unplug your phone...and what about the second light next right to the phone? thanks a lot
Click to expand...
Click to collapse
There isn't a second light - it is a light sensor.
The light flashes different colors. So it could have be in rhythm with one color and different rhythm of another color.
R=Red, G=Green, Y=Yellow, - = 1 sec
---R---R---R---R---R---R---R (Charging)
-G---G---G---G---G---G---G-- (Missed Call)
Y---Y---Y---Y---Y---Y---Y--- (New Message)
So if it were charging, while having a missed call and new message, it would blink
Yellow, Green, Red, Yellow, Green, Red, etc
If it were just charging and a New Message it would
Yellow, pause, Red, Yellow, Pause, Red, etc
Just a Missed call would be
Pause, Green, Pause, Pause, Green, Pause, etc
So basically if you walked away for a minute and you had a new message and missed call while charging... it would be going crazy. You could even make a dash equal to 2 seconds to slow it down... or 3.
Well Player911, you do have a vivid imagination! Simply just flashing any colour would do nicely for me when charging and something has arrived from SMS, email or missed call.
Can you fix it?
I would prefer a green blinking light simply as a 'breathing' light. Maybe it could blink amber/red when it is low on battery.
It should burn full time only when there's a new event.
Anyway, preference may vary, but I think we all agree that it would be awesome if we could customise it!
mitsi said:
Well Player911, you do have a vivid imagination! Simply just flashing any colour would do nicely for me when charging and something has arrived from SMS, email or missed call.
Can you fix it?
Click to expand...
Click to collapse
I have the ideas, but not the know-how.
I am close to a solution and am currently testing this: http://forum.xda-developers.com/showthread.php?p=1954259.
It seems to work, but the drawback is that you lose the LED notification for charging/charged completely to get the LED's to flash on an SMS/Email/missed call....
EDIT: This doesn't seem to work. It will work for a while, but if you charge then remove and then charge again, the charging LED comes back on. This then overrides the notifications LED which is what I want to take priority Back to the drawing board.
Hi,
can anybody provide a hint on how to change flashing time of the green led indicator? It blinks on missing calls but I'd like to increase the blinking period. I have HTC TD2 with Manilla 2.5 and Touch Sense.
my TD2 comes tomorrow, i think i miss my kaiser's led indicators when using TD2. kaiser is the best and enjoying with its leds, mostly when gps wifi and bluetooth opened at the same time
ccaparli said:
my TD2 comes tomorrow, i think i miss my kaiser's led indicators when using TD2. kaiser is the best and enjoying with its leds, mostly when gps wifi and bluetooth opened at the same time
Click to expand...
Click to collapse
My old P3300 (Artemis) was like that too - quite a light show with gps, wifi, and bluetooth all on. Doesn't last long, 'cos the battery goes flat!
I really miss the flashing green "in service" LED. It was so handy to know a) you had reception and b) the phone hadn't crashed or the battery expired. The TD2 just sits there "lifeless" giving you no feedback at all.
At the top of the phone you have what i thought were 2 lights, the left turning amber when charging and green when fully charged, when the phone is on normal standby i thought it flashed periodically, does it cos mine does not? secondly the other side which is a 'light sensor' but i thought this went blue when bluetooth was activated, again mine does not, my phone is Brand new with 6.5 preinstalled, is my phone faulty? i am sure on previous HTC models the right side was a 'blue light' so to clarify when my phone is in normal 'standby' there are NO lights, the only lights are on the left side which go amber when charging and solid green when fully charged and flashes green when there is a missed call or sms, the right side appears just to be a 'sensor' Is this all correct.
Any clarification will be much appreciated.
Thanks
GD
On the left you have a LED, which behaves in the way you wrote, except for the fact that it flashes when you have a missed call or a new message, not during normal stand-by. On the right is a light sensor which, of course, will never flash nor become blue when bluetooth is active.