Before this site was hacked I have read a post about removing the old microsoft stack icon after putting the widcomm stack on it?
I can't find it anymore!
Does somebody knows how to do this without any bugs ?
Best regards,
Dide
You must delete a reg file.
Local_machine/services/BTicon.
Delete the BTicon reg. file. then soft reset
Doesn’t this solution slow down the performance of the unit after the soft reset?
I’ve read this in an older post.
I remember something about an extra solution for this one.
Br,
Dide
I can't really tell you this, I personaly used the method posted below.
if you afraid some trouble coz of delete this registry, you can add : mark before BTicon like this
;BTicon
this registry is not force any more. and try to use problem will be happened or not.
if you wish to make it back to default, you can delete this ; again. it registry will come back.
Original BTicon Registry Entries
Anyone who has the original BTicon values or an exported key? I need to restore my MS BT icon.. Thanks!
original reg
REGEDIT4
[HKEY_LOCAL_MACHINE\Services\BTIcon]
"Dll"="BTIcon_Dll.dll"
"Order"=dword:00000008
"Prefix"="APP"
"Index"=dword:00000003
"Context"=dword:00000001
"DisplayName"="Bluetooth Icon"
"Description"="Bluetooth Icon Service"
"Keep"=dword:00000001
Re: original reg
Asukal said:
REGEDIT4
[HKEY_LOCAL_MACHINE\Services\BTIcon]
"Dll"="BTIcon_Dll.dll"
"Order"=dword:00000008
"Prefix"="APP"
"Index"=dword:00000003
"Context"=dword:00000001
"DisplayName"="Bluetooth Icon"
"Description"="Bluetooth Icon Service"
"Keep"=dword:00000001
Click to expand...
Click to collapse
could you post the .reg file instead? thanks!
regstry
u can copy/past this regstry to editor,then rename its expasion to "reg" instead of txt. it became reg file. sorry im out now and posting with iis, difficult to upload it. pls try it
I've managed to use the Extended_Rom and Config to restore an XDAII after hard reset.
Problem is that I need to add a registry entry for a control (from the config file)
I used the How to Make the extended ROM visible on your HTC Himalaya .cab
http://www.ppcw.net/?itemid=1638
can anyone explain how i would do something similar (simply?)
thanks
If like me your imate jamin has no icon for cab files I have the solution
Edit the registry and change the following value to read
[HKEY_CLASSES_ROOT\cabfile\DefaultIcon]
Edit the (Default) so it reads
shellresapps.dll,-15618
Or run the attached cab file.
Or import the reg file (if you have a registry editor which can)
Nice job - worked on my wizard too :wink:
Im just not too sure why the value was set to what it was, it simply doesnt work.
I noticed on my WM5 emulator it all looked fine so just copied and pasted the correct key.
Hi All,
I'm trying to make some registry changes on the Mogul and when I save the changes all is ok until I soft boot and then they go back to their default values. How can I prevent this?
I am also trying to save a file in the \Windows directory and it's giving me an access is denied message, how do I unlock this directory?
Thanks,
X2K
Which registry editor are you using?
Try using Resco explorer and registry editor pluggin:
http://www.resco.net/pocketpc/explorer/
I hope it helps.
I'm using PHM Regedit
Which registry key(s) are you trying to edit? Some keys don't get saved or get reset no matter what upon reboot.
Try this:
In [HKLM\System\ObjectStore] is a reg key "RegistryType=1", which means Hive based registry.
When you set it to "RegistryType=0", which means FILE based registry, all changes you do in the registry will stay there also if you reboot with device's reset button...
BUT AFTER YOU CHANGE THIS VALUE, FIRST REBOOT HAS TO BE DONE WITH SOME SOFTWARE, NOT WITH THE RESET BUTTON.
Subsequent reboots can be done with reset button then.
lanwarrior said:
...
In [HKLM\System\ObjectStore] is a reg key "RegistryType=1", which means Hive based registry.
When you set it to "RegistryType=0", which means FILE based registry, all changes you do in the registry will stay there also if you reboot with device's reset button...
Click to expand...
Click to collapse
Great tip, even after a year since you posted it . Couldn't get rid of the default t-mobile -MDA Vario III aka kaiser- settings (PIE homepage e.g.), but you helped me out on this one
Hello all. I have tried to make the registry change (In [HKLM\System\ObjectStore] "RegistryType=1") to "RegistryType=0" mentioned above. That worked fine but I still can't save a change I'm trying to make. I bought MS Voice Command and was told to change the [HKLM\Software\OEM\Voicecommand path to \Program Files\MS Voice Command\voicecmd.exe. I can't seem to save the change. I have used several different registry editors including PHM, Resco and CeRegEditor. The displayed path (\Windows\SDDialer.exe) will not update. I'm using a Verizon XV6800 with WM 6.1 and the Verizon MR-1 update. Any ideas?
Thanks in advance.
Hi all
First off, I think that this may only work on a WWE ROM. If you do try it on any other ROM, please make sure you back up the two registry keys listed in point 2) of the instructions below.
I've been fiddling around with the CommManager registry entries and image files and I've managed to successfully add two additional functions to the CommManager. It's working as follows:
Airplane Mode: Working as default settings.
Phone: Working as default settings.
Bluetooth: Working as default settings.
Wi-Fi: Working as default settings.
Microsoft Direct Push: Working as default settings.
Data Disconnection: Working as default settings.
3G: Switch fully working. Row Area Mapped to "\CMBandSwitching.exe".
Internet Sharing: Switch opens Microsoft Internet Sharing UI. Row area mapped to "\Windows\CMInternetSharing.exe". Switch changes to indicate HTC Internet Sharing connected.
Problems/To do:
Although I can enable more functinos using:
[HKLM\Software\HTC\CommManager]SupportedFunctions dword=0x0000000a(10)
For some reason you can not select the bottom two functions in portrait mode, only in landscape.
I can enable the Vibrate option with REG_SZ=Vibrate in a number key but I can't get the Vibrate Icon to display in normal or silent modes.
I can't map the ringer row area to the manila sounds page or the HTC Volume Control function (\Windows\Volumecontrol.dll I think)
If you think you can help with these problems, please update the thread.
Instructions:
In the .zip file attached there are two registy entry files as well as four image files.
1) Close Comm Manager
2) Back up the following registry Keys and all their containing vaules: [HKLM\Software\HTC\CommManager] & [HKLM\Software\OEM\UTMS]
3) Import the registry entries into your phone's registry from CommManager.reg and UTMS.reg in the .zip file attached.
4) Copy the four image files into the \Windows\ folder of your device. N.B it is not recommended to copy them directly from your computer to the windows directory, but to your storage card first.
Edit: Original registry entries for HKLM\Software\HTC\CommManager uploaded.
Cheers
andrew-in-woking
You can add more buttons trhough Registry:
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager]
"SupportedFunctions"=dword:6
Here you can extend it to 8 buttons, what fills the whole screen! After increasing the possible buttons, just add the following (example):
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\6]
@="AUTD" [I](That's ActiveSync)[/I]
"Execute"="\\Windows\\repllog.exe" [I](Path to executable or any other file)[/I]
"ExecuteCommand"="//remote" [I](only needed if you want to start the application with commands)[/I]
Please note: the numbering begins with 0, so if you want 8 buttons, you need at least [HKEY_LOCAL_MACHINE\Software\HTC\CommManager\7]!
List of supported functions
animelover said:
You can add more buttons trhough Registry:
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager]
"SupportedFunctions"=dword:6
Here you can extend it to 8 buttons, what fills the whole screen! After increasing the possible buttons, just add the following (example):
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\6]
@="AUTD" [I](That's ActiveSync)[/I]
"Execute"="\\Windows\\repllog.exe" [I](Path to executable or any other file)[/I]
"ExecuteCommand"="//remote" [I](only needed if you want to start the application with commands)[/I]
Please note: the numbering begins with 0, so if you want 8 buttons, you need at least [HKEY_LOCAL_MACHINE\Software\HTC\CommManager\7]!
Click to expand...
Click to collapse
Hi animelover
Do you know where there is a list of supported functions, such as "@=:autd""?
Thanks
andrew-in-woking
I think @= is the default string
Yes, the "@" is the Default name of any new entry!
As far as I know, you can use these posibilities with "@":
Code:
3G [I](3G switch from Auto to GSM and vice versa)[/I]
Phone
Bluetooth
WLAN
AUTD [I](ActiveSync)[/I]
Ir [I](OBEX service, I think)[/I]
DataDisconnection
FlightMode
Please note: the Default entry "@" must be a "String" value!
Here my reg file to extend comm to 8:
Icons: http://forum.xda-developers.com/showthread.php?t=536466
Update (90% Complete)
Hi all
I've been fiddling around with the registry entries and image files and I've got it to nearly the stage I want to. Check out the screen shot attached. Summary of Progress:
Airplane Mode: Working as default settings.
Phone: Working as default settings.
Bluetooth: Working as default settings.
Wi-Fi: Working as default settings.
Microsoft Direct Push: Working as default settings.
Ringer: Switch Working fully but does not update when the volume setting is changed; toggles between current state and Vibrate or Vibrate and sound on. Row area mapped to "\Windows\Mute_sound.exe" which works. Ringer icon is only displayed when sound is on Vibrate but not on Mute or On.
3G: Switch fully working. Row Area Mapped to "\CMBandSwitching.exe".
Internet Sharing: Switch opens Microsoft Internet Sharing UI. Row area mapped to "\Windows\CMInternetSharing.exe". Switch changes to indicate HTC Internet Sharing connected.
Problems/To do:
Have Ringer/Vibrate icon (Or other representative icons) displayed when sound is on or mute/silent.
Map Ringer/Vibrate row area to the Manila Sounds Settings Page or HTC Volume Control Function.
Enable the Vibrate Switch to change on selection.
If you think you can help with these problems, please update the thread.
Instructions (Attachment is on Post #1):
In the .zip file attached there are two registy entry files as well as four image files.
1) Close Comm Manager
2) Back up the following registry Keys and all their containing vaules: [HKLM\Software\HTC\CommManager] & [HKLM\Software\OEM\UTMS]
3) Import the registry entries into your phone's registry from CommManager.reg and UTMS.reg in the .zip file attached.
4) Copy the four image files into the \Windows\ folder of your device. N.B it is not recommended to copy them directly from your computer to the windows directory, but to your storage card first.
Cheers
andrew-in-woking
Orignal Reg keys Required
I have applied the Reg keys without backing up my orignal and having problem with Comm manager now. I would appreciate if some one can upload the orignal Reg keys so i don't have to hard reset. Thanks.
What problem are you having?
aqeelhaider said:
I have applied the Reg keys without backing up my orignal and having problem with Comm manager now. I would appreciate if some one can upload the orignal Reg keys so i don't have to hard reset. Thanks.
Click to expand...
Click to collapse
Hi ageelhaider
What problem are you having specifically? I must admit I don't have a backup myself, hence the instructions to do so.
Cheers
andrew-in-woking
Hi andrew-in-woking,
I was able to fix my comm manager by deleting the existing reg entries and then importing the reg keys you have provided and its working fine now Thanks for your hard work. Looking forward for the Vibration key to fully function.
Hello Andrew
I tried your changes comm. extended works well in my rom AxLor in Italian, enclosed screen
Let me put in my kitchen this change
but I can not find the package to add the string:
[HKEY_LOCAL_MACHINE \ Software \ OEM \ UMTS]
"OpMode" = dword: 00000000
"PrefDomain" = dword: 00000002
"PrefRAT" = dword: 00000001
[HKEY_LOCAL_MACHINE \ Software \ OEM \ UMTS \ BandSelection]
"BandSettingRetryCount" = dword: 00000003
"Band" = dword: 00000000
Can you help?
I'm not sure I can help.
alesscam said:
Hello Andrew
I tried your changes comm. extended works well in my rom AxLor in Italian, enclosed screen
Let me put in my kitchen this change
but I can not find the package to add the string:
[HKEY_LOCAL_MACHINE \ Software \ OEM \ UMTS]
"OpMode" = dword: 00000000
"PrefDomain" = dword: 00000002
"PrefRAT" = dword: 00000001
[HKEY_LOCAL_MACHINE \ Software \ OEM \ UMTS \ BandSelection]
"BandSettingRetryCount" = dword: 00000003
"Band" = dword: 00000000
Can you help?
Click to expand...
Click to collapse
Hi alesscam
I'm really sorry but I don't actually know much about ROM Kitchens. Are you looking for an .rgu file? I understand that you can rename a .reg file but you may need to edit the file. Hlopefully one of the forum ROM Cookers could help. I was thinking of making a .cab file and if I can do this that might help you.
Cheers
andrew-in-woking
thank's Andrew...
i have sloved with rgu file
But i have another problem;
in v.1.1 the bloothoot switch not work...
have you any idea???
No idea
alesscam said:
thank's Andrew...
i have sloved with rgu file
But i have another problem;
in v.1.1 the bloothoot switch not work...
have you any idea???
Click to expand...
Click to collapse
Hi alesscam
I'm sorry, I don't know. It's working in my device. You should only need the default (unnamed) value "Bluetooth" in the relevant registry Key.
What problem are you having specifically?
Sorry
andrew-in-woking
the problem is alone in the key "on-of", when tap tells me there "impossible to activate bluethoot...this however it didn't happen with the version 1.0
Can you give me the version 1.0 so control which is the difference?
??
alesscam said:
the problem is alone in the key "on-of", when tap tells me there "impossible to activate bluethoot...this however it didn't happen with the version 1.0
Can you give me the version 1.0 so control which is the difference?
Click to expand...
Click to collapse
Hi alesscam
I didn't edit the registry with regards to the Bluetooth Switch. They are the default registry entries.
Unfortunately I've just had to Hard Reset my device so have no registry editor loaded on there to test the device.
Before I re-load the extended Comm Manager I will export my CommManager registry key to compare them.
This will be tomorrow.
Cheers
andrew-in-woking
Andrew
if this change is specific to the commanager of rhodium
maybe I will not work because I use that of topaz
andrew-in-woking said:
Hi alesscam
I didn't edit the registry with regards to the Bluetooth Switch. They are the default registry entries.
Unfortunately I've just had to Hard Reset my device so have no registry editor loaded on there to test the device.
Before I re-load the extended Comm Manager I will export my CommManager registry key to compare them.
This will be tomorrow.
Cheers
andrew-in-woking
Click to expand...
Click to collapse
Ok Andrew
I have sloved with modified your file .reg
this is my rgu modified into my rom AxLor(ITA)
with OEM packages Topaz Commanager (attachement at end post)
i have delete this string in your .reg:
"BluetoothPlatformType"=dword:00000001
Specific to Rhodium
This mod is specific to the HTC Rhodium Comm Manager. I don't know what the effect will be on other devices/Comm Managers.
Cheers
andrew-in-woking
Andrew
read my post above your ...
I resolved