When using the Universal as a USB modem, although the backlight turns off as per the the setting in "backlight"; the device stays on along with the LCD screen. Since I use the modem for hours at a time, I'm afraid the pixels would get worn out quickly.
I tried to use Window Media Player's "toggle screen" function; but it doens't work unless I'm playing media file.
Any tips/tricks to turn the LCD completely off, while leaving the modem program on?
TIA!
It may sound too simple but when you close the XDA, programs still run but the LCD goes off.
I'd go with the above suggestion, but if you do need, for some reason, to leave the screen open, press and hold the power button and the light should turn off.
Broon said:
It may sound too simple but when you close the XDA, programs still run but the LCD goes off.
Click to expand...
Click to collapse
When you mean "close", do you mean close the clam shell so that the screen faces the keyboard? How can one be sure the screen is off at that point? The light is off for sure... but the actual screen?
Turning it 'off' (standby mode) by pressing the power button would kill the modem connection.
numanoids said:
I'd go with the above suggestion, but if you do need, for some reason, to leave the screen open, press and hold the power button and the light should turn off.
Click to expand...
Click to collapse
But I don't just want the light to turn off -- under good lighting, one can still see the screen is still 'active'; and I'm afraid that prolonged usage would cause stuck pixels.
Thanks for the tips from both of you though.
Related
Hi all,
I upgraded to an O2 Exec a little over a week ago from a Blue Angel.
Initially I had a few concerns about it, but thankfully I found this forum, and have managed to get a number of enhancements, from increased storage and better radio (v1.09) to being able to turn on the flash light using a hardware button. My Exec is now running faster than my Blue Angel ever did, and hasn't frozen once. I've already become quite attached to it.
One thing that I think would be useful would be to have the unit turn on when the lid is opened, and off when it is closed. In the Power settings you can uncheck the box that turns off the device if it is not used for x mins, which has the effect that the screen will come on whenever the lid is opened. However, because the device is still running the battery still takes quite a hit even though the screen is turned off, and even when you lower the cpu speed.
Is it possible to turn the device on and off by opening and closing the lid?
Cheers
Rowan
Bump
Hi, I have mine set to come on and off when you open close the lid, and it's set exactly how you have said. Power settings, and stop the device going off. And Backlight settings, stop the backlight dimming, and lower the backlight when on battery mode.
There is no "off" mode like Nokia handsets, only Standby, which is what happens when the screen is closed. (I think).
jmdrizen said:
Hi, I have mine set to come on and off when you open close the lid, and it's set exactly how you have said. Power settings, and stop the device going off. And Backlight settings, stop the backlight dimming, and lower the backlight when on battery mode.
There is no "off" mode like Nokia handsets, only Standby, which is what happens when the screen is closed. (I think).
Click to expand...
Click to collapse
You're not really going into standby mode by closing the case, try switching on wifi or bluetooth and look at the flashing indicator LED, it will still be going whien the case is closed. Nowtap the power button to put the device into standby, no more flashing LED. The phone LED still flashes which is a good thing otherwise you wouldn't be able to recieve calls in standby.
shuflie said:
Nowtap the power button to put the device into standby, no more flashing LED. The phone LED still flashes which is a good thing otherwise you wouldn't be able to recieve calls in standby.
Click to expand...
Click to collapse
From what I know, the Universal has no real OFF mode, only standby, EVEN WHEN YOU PRESS THE POWER BUTTON. On mine, BT and WiFi still flashes even when I press the power button or just close the screen.
Pressing and holding the power button turns the backlight off, a quick press (or tap as I said before) makes it go to standby and should turn off everything but the phone part.
Okay well weve taken a really fun detour discussing the technicalities of standby and 'power off' but lets digress for a moment back to the original topic...
Rabangus, seems the best option you have is what you were doing. The hit to battery shouldnt be that large. I gave it a try not too long ago the way you and the other member had it set up again, and yes youll definitely have to charge it every night but it was doable. But I wasnt using wifi or bluetooth either. I am surprised that using Xscaler it still takes way to much battery. I assume thats what you are using to lower the CPU.
Oh well unfortuntely thats the way it is chief.
Hi guys...
I am as techy as the rest of yew, maybe more so, but I am having a problem understanding one thing about this phone. I know it is something very simple that I am missing, but I can't find anything about it anywhere in the docs, either?
How does the "auto power off" feature work? What I mean by this is, I know we can turn the power off after two minutes or whatever, but I see that the green GSM radio light is still flashing. That's good, that's what we want because we want to be able to receive calls.
The problem I am having is that after a time (I am guessing it is the two minutes?) I can't get the screen to come back on? What am I missing here? Is it me, or is it a bad phone? Auto power off seems to make the phone unuseable until a soft reset.
I tried pushing the power button, nothing. I tried HOLDING the power button, nothing. I tried pushing the TALK button, nothing.
Is the auto power off different than pushing the power button once and putting the device to sleep? What I want is the device to go to sleep after two minutes. I want to be able to use the phone again without doing a soft reset every time.
I know this is something easy, but I can't quite figure it out?
Thomas <><
[email protected]
www.thomasamckean.com
Colonel, HOKC
Author, Soon Will Come The Light: A View From Inside The Autism Puzzle
Author, Light On The Horizon: A Deeper View From Inside The Autism Puzzle
I've been having a similar issue with my 8125. I seem to also have a problem when I turn the device off. I've been trying to pinpoint the circumstances, but haven't had any luck as of yet.
Have you made any progress with this?
hold the power bottom for 3-5 seconds , there will apper a Yes/No dia.tap yes will real shut off. Not good at eng.But is it easy to understand ?
i had a similiar issue recently on a phone i had forever, turns out that i installed GPRS connection monitor that turned the backlight off on my phone... after hitting the power button to wake it up it appeared my screen was still off, so if i turned it at the right angle i could see my today screen.. meaning the backlight was off, i had to keep it at that angle and navigate into the setting menu to turn the backlight on.. i couldnt find a fix for it so i uninstalled the GPRS monitor and havent had the problem since
I have a XDA Neo and the battery life is not really the best, so I keep in standby (hit the side button so the back light and LCD is turned off). But the only way to get the LCD back on is to hit the power button. Is there a way to get the LCD to come back on along with the back light by just tapping the screen?
You can off just the screen rather than put the phone in standby mode. You can use psShutxp or other program (aplenty) to do it.
But this drain battery. Alternatively, unlock all you button so that you can power up your ppc by any hardware button press. That's what I do. To protect against accident power up, I install S2U2 so that a slide on the screen is required to unlock, else it will go back to sleep mode in x min.
Sian said:
Alternatively, unlock all you button so that you can power up your ppc by any hardware button press.
Click to expand...
Click to collapse
How would I do that? What will it shut off?
samson_420 said:
How would I do that? What will it shut off?
Click to expand...
Click to collapse
I only have a Hermes and not familiar with your device but if it running Windows Mobile 6 then you probably can just turn off backlight but prevent phone from going into standby mode.
Start -> Setting -> Backlight
In there you can adjust the setting and timer for the backlight
Start -> Setting -> Power
In there you can adjust the setting for standby or disable standby mode.
Disabling the standby but keeping the backlight on timer should turn off the backlight but the LCD screen will stil be active and will wake on the touch.
One negtive thing about touch screen LCD that is putting it in your pocket may keep repeatly turning the backlight back on and drain your battery quickly without you being aware of it.
Bill
I do have a option to turn off the back light only and not put the phone into standby. But my LCD stays on(without the light) which sucks down the battery life.
I tried out sShutxp, but it only turns off the phone and has no option to turn it back on.
Well, I got the next best thing. I assigned the #1 button to Display Switch. So it turns the display on and off.
Hey, did anyone found solution... is it possible to tweak settings somehow so that display turns on by pushing home button? Or do I really have to push power button every time?
I know of volume button tweak, but.. that one is no good (volume settings gets displayed)... Any other ideas, suggestions? (other than "pull the stylus")
Thanks!
Try AE Button Plus. You can customize a lot of buttons. I didn't tried what you asked, but it worth a try.
Anyway, take care using it.
I would say not. There appears to be no power to these lower buttons while in standby, so no software could work?
Kev
cokester said:
Hey, did anyone found solution... is it possible to tweak settings somehow so that display turns on by pushing home button?!
Click to expand...
Click to collapse
No, for the reasons given.
BUT... you could use MobileMagic to toggle the screen on/off when device is turned face down. That way when you turn it face down, screen goes off and buttons are locked. To turn it back on, turn devicedevice face down again.
You do need to go to Start-Settings-System-Power-Advanced and untick the option, "Turn off device if not used for", because if the device gets turned off (instead of just screen off) it won't respond.
I have it set to turn screen off on reverse portrait too,
so it turns off automatically when I put it in my pocket.
Im also afraid for that power button... used it a lot on my diamond so it got bricked, its so gentle... Im using it as much as little possible now on mine HD for that reason.
I have s2u2 unlock on stylus out, so I pull out the stylus, the HD comes on and unlocks. It's so simple.
gadgetuk437 said:
No, for the reasons given.
BUT... you could use MobileMagic to toggle the screen on/off when device is turned face down. That way when you turn it face down, screen goes off and buttons are locked. To turn it back on, turn devicedevice face down again.
You do need to go to Start-Settings-System-Power-Advanced and untick the option, "Turn off device if not used for", because if the device gets turned off (instead of just screen off) it won't respond.
I have it set to turn screen off on reverse portrait too,
so it turns off automatically when I put it in my pocket.
Click to expand...
Click to collapse
gadgetuk437
Do you find this has any impact on battery life? If i'm right, this just turns off the screen but does not put the device to sleep?
cokester said:
Hey, did anyone found solution... is it possible to tweak settings somehow so that display turns on by pushing home button? Or do I really have to push power button every time?
I know of volume button tweak, but.. that one is no good (volume settings gets displayed)... Any other ideas, suggestions? (other than "pull the stylus")
Thanks!
Click to expand...
Click to collapse
That's not possible for the simple reason that the buttons below the screen are part and parcel of the touch screen, so if the screen is off, they won't work.
gadgetwizard said:
Do you find this has any impact on battery life? If i'm right, this just turns off the screen but does not put the device to sleep?
Click to expand...
Click to collapse
That is correct.
Power consumption, in this case, depends on what applications are left running. GPS, streaming video, etc would be a bad idea to leave running. But more workday apps use very little juice when the huge power drain of the screen is turned off.
MackTK said:
Try AE Button Plus. You can customize a lot of buttons. I didn't tried what you asked, but it worth a try.
Anyway, take care using it.
Click to expand...
Click to collapse
Nope... I've tried that app. Its great for locking down the normal WM hardware buttons, but it doesn't have the HTC bespoke "Home button" on the list of configurable buttons.
Hi, my typical procedure before putting the phone in the pocket is to hold right soft button to lock the screen and to switch off the screen with the power button. I wonder if there is a way to do it at once. You press the power button and screen goes off locked?
Thanks.s.
Install AutolockScreen 1.7 (I'm at work so don't have the cab with me, but if you search this site you'll find it. Install the cab and then go to Start\Settings\System\SmartLock and tick Suspend lock.
LockDevice works well...
http://www.1800pocketpc.com/2009/09...k-the-windows-mobile-screen-after-wakeup.html
Do either of these lock screen apps consume a lot of power?
I understand they have also been created with power saving feaures but what do they run like in a coarse of a day for instance, do they drain the battery quickly?
Thanks.
HD Tweak also has option for autolock when device turned off
Fallen Spartan said:
HD Tweak also has option for autolock when device turned off
Click to expand...
Click to collapse
It does but it has a problem with the background light not undimming after locking.
Doesn't the phone automatically lock itself when you turn off the screen? Mine seems like it always does.
rpimps said:
Doesn't the phone automatically lock itself when you turn off the screen? Mine seems like it always does.
Click to expand...
Click to collapse
Mine doesn't do that unfortunately. I am using the app suggested above by ClydeB1 and its working great, not much battery drain either.
Regards.
ClydeB1 said:
It does but it has a problem with the background light not undimming after locking.
Click to expand...
Click to collapse
My phone is set to quite dim anyway in Power settings so this doesn't affect me.......hence why I forgot about it
I've attached the cab which ClydeB1 was talking about, i.e. SmartLock 1.7
Mastoid said:
Mine doesn't do that unfortunately. I am using the app suggested above by ClydeB1 and its working great, not much battery drain either.
Regards.
Click to expand...
Click to collapse
What happens if you just turn the screen off with the power button? Does touching send/back/etc turn it back on?
rpimps said:
What happens if you just turn the screen off with the power button? Does touching send/back/etc turn it back on?
Click to expand...
Click to collapse
On my device, no. If you turn screen off, only way to turn it on again is with the power button (unless someone rings etc)
rpimps said:
What happens if you just turn the screen off with the power button? Does touching send/back/etc turn it back on?
Click to expand...
Click to collapse
Fallen Spartan said:
On my device, no. If you turn screen off, only way to turn it on again is with the power button (unless someone rings etc)
Click to expand...
Click to collapse
Yes, if you just press the power button the screen goes off but it is not locked and although touching the buttons does not turn it back on, if an sms comes in and wakes the device the buttons are then active and could be accidentally touched whilst in your pocket. With the screen locked this does not happen and you need to first unlock the screen to access the sms or the device in general.
ClydeB1 said:
Yes, if you just press the power button the screen goes off but it is not locked and although touching the buttons does not turn it back on, if an sms comes in and wakes the device the buttons are then active and could be accidentally touched whilst in your pocket. With the screen locked this does not happen and you need to first unlock the screen to access the sms or the device in general.
Click to expand...
Click to collapse
True, yes, but I use Smartlock 1.7 so phone does lock
Fallen Spartan said:
True, yes, but I use Smartlock 1.7 so phone does lock
Click to expand...
Click to collapse
Was using your answer and expanding on it for explaining to rpimps
ClydeB1 said:
Yes, if you just press the power button the screen goes off but it is not locked and although touching the buttons does not turn it back on, if an sms comes in and wakes the device the buttons are then active and could be accidentally touched whilst in your pocket. With the screen locked this does not happen and you need to first unlock the screen to access the sms or the device in general.
Click to expand...
Click to collapse
Oh ok thanks for the info. Mine does unlock when I get a call/sms but I text a lot so I prefer it to do that, otherwise I'd be wasting a lot of time unlocking it every time I got a message.
Thanks for the hint ClydeB1 and thanks for the cab Fallen Spartan.
I tried SL 1.7 and there are three things, which I do not really like.
1. The phone returns to the very same screen where it was switched off. Some may consider it a pre. I prefer to see the clock when I switch it on.
2. The screen blink once when the phone is switchd on. I find it a bit irritating.
3. I do not see how I can uninstall it.
So, I wonder if you can undim the screen in HD Tweak by touching it or you need to do something extra?
You uninstall it as with any other cab. It's called Chobit Company Smartlock on the list of apps.
If you do use the hd tweak edit, you'll need to push the power button twice I think (it's been a long time since I used it I've forgotten), the first time to activate the screen (you'll see the screen but the backlight will not light up properly) then again to undim and then you can unlock the screen. I think that's the sequence, you'll need to play a little.
ClydeB1 said:
You uninstall it as with any other cab. It's called Chobit Company Smartlock on the list of apps.
If you do use the hd tweak edit, you'll need to push the power button twice I think (it's been a long time since I used it I've forgotten), the first time to activate the screen (you'll see the screen but the backlight will not light up properly) then again to undim and then you can unlock the screen. I think that's the sequence, you'll need to play a little.
Click to expand...
Click to collapse
The way I had activated the lock was by pressing and keeping pressure on the end call softkey, after a few seconds it vibrates and activates the lock. It comes on automatically when you put the screen off or restart the phone.
Regards.
Auto-lock screen
I'm running CLEAN ROM (B version) with SPB Mobile Shell.
Considering I don't want any superficial apps installed on my HD, I used HD Tweak and turned autolock on.
To get over the "background light not undimming after locking" problem, I initially unchecked "Automatically adjust backlight" under Settings > System > Power > Backlight and set at 100%. I also set the "Dim backlight on Device" when on battery power to the same time as "Turn off device if not used for". In my case that was 1 minute. I tested and this worked fine.
I then went back in and checked the "Automatically adjust backlight" checkbox.
I also performed the wake up with volume button reg edit making it easier to wake up device.
[HKEY_CURRENT_USER\ControlPanel\Keybd]
"DefaultKeyLock"= 0
UPDATE:
Just tested again and I realised if you wake up device but don't unlock. The screen will automatically dim. Unfortunately if you unlock immediately after, the dim screen issue rears it's ugly head again. The only workaround at this point is to completely disable dim backlight.