To All
I’ve been using the HOLUX gr 230 for more than a year in my XDA II using Windows Mobile 2003 and Windows Mobile 5.0 with Destinator 3.075.
I never had any problems using it.
Last month I bought an i-mate JasJar that comes with original Mobile 5.0.
The Bluetooth seems to work fine because I’m using a Jabra 250V and if I turn it off and turn it on again, Windows recognize that the Jabra is on and work fine.
As you see in “display_2.bmp”, HOLUX work fine in the JasJar, with Destinator 3.075 see on “display_5.bmp”.
But, if I turn off and on again, It appears a message on the display: Cannot open the COMPORT as you can see on “display_1.bmp”.
Why it appears a “?” on the left side of HOLUX? (as you can see on “display_3.bmp”).
It the “display_4.bmp” you can see the HOLUX is working in COM 4.
Have somebody already tested HOLUX GR 230 on a i-Mate JasJar, or similar product using Windows Mobile 5.0?
Best regards,
Jose
This might be a slightly 'dumb' question, but - how did u manage to work fine with WM5 for a year, when it only came out officially just a few weeks back?
IF u did actually use WM5, and not something else branded as such (and I am giving u the benefit of my doubts here) - then MAYBE it was an unofficial and/or unfinished product/version, which might explain your current problems.
I have just bought the Holux 236 which I assume uses the same drivers as the 230, and also had some troubles, but haven't really manged to find time to deal with it yet - If I have any solutions in the near future I will let you know.
Good Luck!
techDot said:
This might be a slightly 'dumb' question, but - how did u manage to work fine with WM5 for a year, when it only came out officially just a few weeks back?
IF u did actually use WM5, and not something else branded as such (and I am giving u the benefit of my doubts here) - then MAYBE it was an unofficial and/or unfinished product/version, which might explain your current problems.
I have just bought the Holux 236 which I assume uses the same drivers as the 230, and also had some troubles, but haven't really manged to find time to deal with it yet - If I have any solutions in the near future I will let you know.
Good Luck!
Click to expand...
Click to collapse
My current problem is the JasJar OS 5.0?
I did not have an problem with the Himalaya OS 2003 or OS 5.0 + Holux 230 + Destinator 3.
The best version of WS OS 5.0 for Himalaya was by buzz_lightyear.
Since 02/24/05 OS 5.0 whas available in the forum.
Thanks you, as I dont have the OS 5.0 sorce code when my friend that works at Microsoft solve the problem I let you to know.
[],s
-jose
Related
Hi guys!
Just learned of this forum, it might be my last chance.
I bought the GlobalSat SD-501 GPS secure digital receiver in Hong Kong. It was a big gamble and it turned out to a headache.
After installing the thing you are supposed to be able to see which comport it has received using the nifty utility "GPSInfo" from GlobalSat.
It is supposed to identify itself as COMX: MANF-0501-CARDID or something similar.
... but after loading the program I see the following:
COM1: Serial
COM2: Serial_Cmd
COM3: IrCOMM
COM4: BTIBserial
COM5: BTOBserial
COM9: Serial_Data
That is, nothing that resembles anything what I want. I tried to force select one of the following ports but of course that didn't work. There are also 3 different drivers to test, the one supplied on the cd and two on the developers site, found here:
http://www.globalsat.com.tw/english/download.php?level_id=3
I have tried all three drivers with no effect. I have also tried soft resetting after install and even a hard reset to see if that would solve any issues.Along with the drivers there is also a program called COMKiller that disables comports (after surfing found out that most IPAQ's tie up all comports leaving nothing for the GPS), I tried this as well with no success.
The LED on the GPS is supposed to blink when it has your location fixed, the device actually does that after a while so it seems to have a working hardware anyway - it just won't talk to the phone.
From looking at other forums it seems as this device work for people running the S2020 (the Himalaya) so maybe there is hope.
In summary this is what I have tried:
1. Tried all three drivers available from maker.
2. Soft resetting.
3. Hard resetting.
4. Upgraded ROM to the version described below.
5. Disabled IR (incoming beam).
This is what I have:
Qtek S100
ROM: 1.06.00 WWE
ROM date 01/06/05
Radio version: 1.05.00
Protocol version: 1337.39
ExtROM version: 1.06.115 WWE
Model NO.: PM10A
Maybe there is something in the driver that is trying to access the S100 in the wrong way, maybe it is trying to force select a busy comport. I don't know. Please you kind devs and others, can you maybe take a look at this?
best regards
Kristian
I querried this forum about this about a month ago and had no luck.
I have an o2 mini. When i plug the sd501 into the mini The light doesnt come on. My friend has JAM. When I plug it into the jam the light comes on but still i have not been able to get it to work,
If you find a solution please post
Could any of you smart devs please take a look at this, I would be eternally grateful!
/Kris
Krillo said:
Could any of you smart devs please take a look at this, I would be eternally grateful!
/Kris
Click to expand...
Click to collapse
Hi Kris,
did you already try on the forums you can find at www.pocketgps.co.uk ???
IMHO that is the best-gps-experts website; if nobody can help you there, you can put your receiver in the recycle bin
Sorry I cannot help you some more
Hi,
yes I have posted in that forum too - awaiting response. But I am sure this is solvable, it's not rocket science. Well, for me it might be but I know there are some seriously smart people here eager to give support
/Kris
being a bit a GPS expert myself as well as an S100 owner I have not found a solution so far to get this combo to work, which I guess is not that bad at the end of the day considering you lose the SD slot for storage unlike with say a Bluetooth GPS. I will certainly revisit when they send me the SD-502 with its 512mb RAM, small helix antenna and SIRFIII chipset for testing in a few weeks ;-)
GpsPassion -> Do you have some kind of relation with GlobalSat? If so, have you had any comments from them if they will try to make this combo to work or not?
I mean, I like the device and it would suit my needs quite well - and I bought mine so I must decide if I should sell it or if there might bew a solution sometime. Do you have any contacts?`
best regards
Kristian
Hello Sd 501 "victims",
searching through the net I ended up at this thread. I also would like to run my sd-501 with my magigian. Is there really no solution to that problem?
Stefan
hi
the drivers arent installed properly you should have on there manufactors card under the com ports. reinstall the drivers andf it will work are you using the disk that came with it as the drivers you down load dont seem to work.
kevin
Nice to see an old thread coming back to life. I for one never managed to get the 501 to work on an S100 and the 502 is following the same fate, looks like some SDIO issues at HTC...http://www.gpspassion.com/fr/news.asp?id=410
just signed up today and this is my first post! anyway i am having the same problem. i have been trying to get the globalsat sd-502 to talk to my Qtek s110 without any joy depsite expansys saying it is compatible.
i have tried the drivers supplied and those on the globalsat website. it cannot see any com ports other than those mentioned earlier in this thread.
i do know from a local guy who tried to help me out that he managed to get it working with his xdaii which was not comaptible but he failed to help me out on with the qtek. i think this is one that globalsat will need to look at.
its a shame because it locks on to satellites just as quick as my globalsat bt-338 but wont suck the battery dry as quickly the bluetooth does. i will be interested to here if someone comes up with a solution.
tebs said:
just signed up today and this is my first post! anyway i am having the same problem. i have been trying to get the globalsat sd-502 to talk to my Qtek s110 without any joy depsite expansys saying it is compatible.
i have tried the drivers supplied and those on the globalsat website. it cannot see any com ports other than those mentioned earlier in this thread.
i do know from a local guy who tried to help me out that he managed to get it working with his xdaii which was not comaptible but he failed to help me out on with the qtek. i think this is one that globalsat will need to look at.
its a shame because it locks on to satellites just as quick as my globalsat bt-338 but wont suck the battery dry as quickly the bluetooth does. i will be interested to here if someone comes up with a solution.
Click to expand...
Click to collapse
Sorry to hear about your problems - but, what software are you trying? A good freebie is VisualGPS CE, and does work with the SD-501 (i use said GPS reciever with my Blue Angel).
But unfortunatly, I think this problem is purely a HTC problem, not global sat. Remember, they made thier device compatible to the BSquare SDIO Now protocalls - if HTC decides not to follow that , then it is not GS's fault (though, it is odd that they would support the SDIO on devices like the II, IIs, III, but not on other devices..)
Divine im using tom tom 5 but as far as gps programs ive used both gpsinfo and winfast as someone on the pocketgps site suggested. yeh it probably is something that htc need to look at.
thanks to a bit of browsing on here ive downloaded a trial verison of phone alarm which allows me to use a single press of tghe tom tom icon to activate the bluetooth and tom tom in one go. exiting tom tom switches the bluetooth off and the phone so i can power the device down. this will keep me happy till someone comes up with a solution.i am going to return the sd-502 to expansys and ask them to remove the qteks110 compatiblity reference on their site
Hi,
I'm considering purchasing an Magician (XDA Mini) but one of the reasons for doing so is to use a program called Memory Map (www.memory-map.co.uk) combined with a GPS receiver to go walking/cycling with.
Does anyone know if the memory map software works? It claims to be compatible with "Any Pocket PC that uses the Microsoft Pocket PC 2002 or Windows Mobile 2003 or later." but I'm not 100% convinced that this includes the phone version... no one in the highstreet phone shops can answer this question and I would like to be sure before shelling out on a new phone!
FYI: memory map do a free 30 day trial, so if you're interested you could always try it out and let me know....
Thank you
yes it should work ok with the mini
works fine on my Blueangel, so I can't see why it wouldn't work on magician.
Works fine on my MDA Compact
It works!
Excellent, I'll be getting one then.... just got to wait 2 weeks for my orange contract to run out - what a long 2 weeks they are going to be!
Thanks all for your replies.
Cheers
Glyn.
OK, so I am looking to buy a Jam. I am in the UK and currently carry around an IPAQ with TOMTOM on for the car, a Nokia mobile phone and a Blackberry for my work email.
I've been reading these threads for some time and see there are some problems and no one can get the Blackberry client to work. But it could still save me two of the devices I currently have (phone / tomtom).
Which GPS devices are you using with the Jam and TomTom, are you happy with them and how much were they (in UK)?
Can I use bluetooth headset and bluetooth GPS with TOMTOM at the same time? e.g. if I am driving and tomtom is nagivating me, can I make and receive calls still?
How good is it as a phone? Is sound quality ok? I will be using it for work so can't afford to have something that isn't reliable and will annoy my customers!
Is there anything else coming along in the short term I should wait for instead of getting the Jam?
From your wealth of experience, do you recommend I get one or wait?
Will is work in America? My company is based in Boston and I travel there sometimes so it would need to work out there too.
Many thanks in advance for any advice.
I would wait for a similar device that ships with the new Windows Mobile 5. As it stands, there will be no official release of the OS for the Magician :-(
When released in September, the ETEN M600 will be a very good alternative.
(Hope HTC, imate, etc. read these forums!!!)
Just found this: http://www.mobile-review.com/exhibition/computex-2005-smarts-en.shtml
Looks like the R-Ten M600 might be the one I wait for as it has WM 5.0 and WiFi. Unless HTC release a new Magician.
You guys mean ETEN M600 ? But in another thread here they were saying Eten M500 is good enough... ?
Hi guys!
I have my Magician (QtekS100) for over a year now, and I've been always very happy with it. One of my best purchases ever.
It has never gave me any problem until recently when I decided to purchases a GPS Bluetooth (Nokia LD-3W) and my nightmare started.
After many days of trying things, turns out this GPS is a bit special and doesn't like all BT Drivers/Roms.
As the Normal MS drivers won't work and I have to use others.
In your opinio what is the best BT Stack software?
My magician currently is ROM 1.06.03 ESN, ExtROM 1.06.117ESN, Radio 1.05.00, Protocol 1137.39 with the Toshiba Drivers.
Should I upgrade it to a new ROM?
bchuertas said:
Hi guys!
I have my Magician (QtekS100) for over a year now, and I've been always very happy with it. One of my best purchases ever.
It has never gave me any problem until recently when I decided to purchases a GPS Bluetooth (Nokia LD-3W) and my nightmare started.
After many days of trying things, turns out this GPS is a bit special and doesn't like all BT Drivers/Roms.
As the Normal MS drivers won't work and I have to use others.
In your opinio what is the best BT Stack software?
My magician currently is ROM 1.06.03 ESN, ExtROM 1.06.117ESN, Radio 1.05.00, Protocol 1137.39 with the Toshiba Drivers.
Should I upgrade it to a new ROM?
Click to expand...
Click to collapse
new blue tooth stack isnt out yet.
the old bsch stack works fine.. has a few bugs..
the toshiba stack and the Bluesoleil stack is very buggy
cya
Bluesoleil wasn't buggy for me when used for wireless internet. What I didn't like was its incompatibility with my headset. And I'm not willing to switch every time so I returned to MS. I'd love to use the new BCHS stack, but noone's got it right now.
Btw: why did you just copy & paste? Please correct it, there are only BT stacks!
Btw2: please tell me the difference between "O2 MINI NEW BLUETOOTH STOCK" and "BT STACK(BCHS)" :lol: :lol: :lol:
Chatty said:
Btw: why did you just copy & paste? Please correct it, there are only BT stacks!
Click to expand...
Click to collapse
Yes, I did copy from the Subject on other posts.
As far as I know the correct word is Stack and Stock is just misspelled
Stack applies to any Implementation of networking protocols, not just bluetooth.
http://en.wikipedia.org/wiki/Protocol_stack
You just got to love the Wikipedia!!! :wink:
BT Tools is the solution (for me at least)
try "bluetooth tools" this was the solution for me when I had Magician. worked for me with several BT GPS units + TomTom 5.21 and Falk/MarcoPolo Navigator 2004-2005
http://bluetooth.i-networx.de/index_e.html
I did not have any problems with my GPS receiver with either of the stacks. And I do know what a stack is. That's why I asked you to correct the spelling mistake.
I use Bluesoleil and am half-way happy.
Unfortunatly I cannot use MS stack because after some time it gives me the error about "please turn flight mode first", even if it is off.
Anyone know how to fix this?
Re: BT Tools is the solution (for me at least)
aleksandr said:
try "bluetooth tools" this was the solution for me when I had Magician. worked for me with several BT GPS units + TomTom 5.21 and Falk/MarcoPolo Navigator 2004-2005
http://bluetooth.i-networx.de/index_e.html
Click to expand...
Click to collapse
does this support a2dp
re
best is windcomm (broadcomm)!!!!!!
who have working version for magician?
johancz
Someone has to know how to use the Bluetooth hack on QTEK 9090? Or if you have any other program similar to it, because I tried in every way and will not x_x.
QTek 9090 Windows Mobile 6.5
Thank you!
I thought all available bluetooth hacking tools are obsolete for couple years now? They only worked in early versions of WM 5 as far as I know. Then they had fixed the security issues.
Well I do not know this, because even with the WM3 old I could not use, using Bluetooth hack any phone that supports Java standard, it works at least QTEK: S, hence I was curious if this is or know how to fix it.