MDA Vario won't boot; ROM seems to be dead - 8125, K-JAM, P4300, MDA Vario General

Hey guys,
I've been playing with my roommate's Vario, and managed to **** it up within the hour!
I can't seem to hard-reset the device, gives me a 'partition failure'. Since I cannot find any nb1 files to write to miniSD and flash the dev (like I do with my Magician), or a decent RUU installer to do it automatically, i'm kinda stuck..
Can anyone provide me with a decent nb1, RUU installer or any other way to restore his T-Mobile MDA Vario?
Any commands I can enter in MTTY/USB to get this ****er going again would be appreciated too!

**** knows.

Can you get into the bootloader at least and try to do apply an upgrade using the K-JAM firmware upgrade utility? All is not lost if you can get into the bootloader.
I'm waiting on mamaich to finish on his ROM dump utility (apparently the new WM5 devices mimic the HTC Typhoon Smartphones).
Change your thread title, it's inappropriate.

BeyondtheTech said:
Can you get into the bootloader at least and try to do apply an upgrade using the K-JAM firmware upgrade utility? All is not lost if you can get into the bootloader.
I'm waiting on mamaich to finish on his ROM dump utility (apparently the new WM5 devices mimic the HTC Typhoon Smartphones).
Change your thread title, it's inappropriate.
Click to expand...
Click to collapse
I can get into the bootloader, but since I haven't got any decent new rom (either the nb1 written to miniSD or a desktop installer that will bypass the Country ID), I'm still stuck...

Hi,
I am very new to all this, I will be getting my Vario this afternoon. I would like to know how this happend??where you just doing regular stuff? or messing around with internal settings or what?
I'm asking because I don't want it to happen to me :shock: , also, when you get this solved could you post how you did it? I'm sure it well help a lot of people if this happens to them

Customer Service?
Did you contact customer service to get a link for the ROM ? 8)
May sound funny or stupid, but they do have the ROM / desktop installer....

If all else fails, you can wait for an update for the Vario, but I'm sure you will be able to load a K-JAM ROM to it before then.

I did contact the T-Mobile CS, and they will replace my device with a brand new one, at my doorstep! Great service!
In the meantime I am still trying to get my Wizard going, but since I do not have a good nb1 file or a desktop installer from T-Mobile (or a hacked version), I'm kinda stuck...

I wouldn't do anything with it. When T-Mobile get it back, I'm sure the'll check it, and if you have a K-JAM rom or something on it, then you will probably have problems. They may even charge you for the new Vario.

Jainoxi said:
I did contact the T-Mobile CS, and they will replace my device with a brand new one, at my doorstep! Great service!
In the meantime I am still trying to get my Wizard going, but since I do not have a good nb1 file or a desktop installer from T-Mobile (or a hacked version), I'm kinda stuck...
Click to expand...
Click to collapse
I thought you said it was your friends, not yours?

mitchello said:
Jainoxi said:
I did contact the T-Mobile CS, and they will replace my device with a brand new one, at my doorstep! Great service!
In the meantime I am still trying to get my Wizard going, but since I do not have a good nb1 file or a desktop installer from T-Mobile (or a hacked version), I'm kinda stuck...
Click to expand...
Click to collapse
I thought you said it was your friends, not yours?
Click to expand...
Click to collapse
yeah it is. But since I wrecked it, I contacted the CS, also because I know more about the technical stuff than my roommate..

Related

02 xda mini rom? updates? keep origonal? change to...i-mate?

finding it hard to get good answers....so in anybodies opinion
the 02 xda mini s
is there any updates from the origonal 1.5.4.2 WWE? if so where can i get em from?
If no updates, maybe the 02 rom isnt the most up-to-date?? and it would be better to change to i-mate? or a q-tec?...if so...which would people recommend? and where could i find them? also...would they effect my being on 02 at all or would evrything stay the same and just the device will work better?!?
what do people think?
jamie
Hello jamie,
I would think that you should at least upgrade to the qtek9100 rom if u worry that u might not turn back to the O2 provided ROM. Or if you want even better performance, you can use the latest imate ROM. But i read in posts that you cannot downgrade as the loki wizard does not work in this rom.
Anyhow, i'm using an xda mini S and using the imate rom though.
Cheers
I was wondering about this as well. I've got an O2 XDA Mini S and it all seems to be working fine (so far). I don't use it for anything spectacular though phone, diary, notebook and I have a few other apps on it. I also run spb pocket plus and spb diary, again with no particular problems.
I know the old adage, "if it ain't broke, don't fix it", but are there any benefits from moving to the latest imate ROM, say?
tzehming,
You said you couldn't downgrade. Do you mean that once you put the latest imate ROM on, you can't ever go back to the original O2? Also, what's the deal with LokiWizard - is there something that needs to be done before the ROM can be upgraded?
(apologies for the dumb questions, I'm starting to get to know my way around the device)
Thanks,
John
jko said:
I was wondering about this as well. I've got an O2 XDA Mini S and it all seems to be working fine (so far). I don't use it for anything spectacular though phone, diary, notebook and I have a few other apps on it. I also run spb pocket plus and spb diary, again with no particular problems.
I know the old adage, "if it ain't broke, don't fix it", but are there any benefits from moving to the latest imate ROM, say?
tzehming,
You said you couldn't downgrade. Do you mean that once you put the latest imate ROM on, you can't ever go back to the original O2? Also, what's the deal with LokiWizard - is there something that needs to be done before the ROM can be upgraded?
(apologies for the dumb questions, I'm starting to get to know my way around the device)
Thanks,
John
Click to expand...
Click to collapse
Hello jko,
Yup u're right about having to use loki to unlock the rom. Search it in the forum and u'll find it. Just type loki.
After unlocking using the software, you can then install any rom for wizards, i.e. O2 mini xda s rom, imate rom or qtek 9100 rom. The one i'm using now is the latest one, which is the imate rom. I heard it cant be downgraded and we'll have to wait for an updated loki software to fix that. But the qtek 9100 rom can be downgraded again. I suggest u try the qtek rom as it makes the pda much faster. The O2 rom is really a turtle when opening the slider and closing it.
Hope this helps
Having read the advice above I'm going to unlock my device and flash it with the qtek 9100 ROM.
Once I've done that, what CAB files do I need to install in order to get O2 MMS and O2 GPRS working again?
Thanks,
Having read the advice above I'm going to unlock my device and flash it with the qtek 9100 ROM.
Once I've done that, what CAB files do I need to install in order to get O2 MMS and O2 GPRS working again?
Thanks,
Can't answer your question, but just a request to post back your experience once you're done. It would be appreciated.
John
well, you could again search the forum for gprs settings. u may not get the automatic setup anymore, thereby may have to do it manually. search for O2 gprs in the forum. as for mms settings, someone made a cab file, I can't remember which forum , but again, it can be searched. Try O2 mms.
hope this helps
I've got the mini S too...
First thing I did when I got it was to get rid of all the o2 crap on it... couldn't believe how slow it was even in basic mode!
I did the whole hard reset then soft reset when it says "customizing..."
This basically leaves you with a bare o2 wm5 rom without any of the customiztion installed. MMS won't work and either will GPRS.
To get these working you need to install Total Commander on your mini S and browse to the /extended_rom/ directory.
The cab files in this directory are the files installed when it says "customizing..." on a hard reset.
You can then selectively install which ones you would like to install.
There is a brief outline of what each one is on the htc wizard page on the wiki but I've made a better one I'm gonna stick on there.
You also need to input the GPRS settings and MMS settings manually and install a cab from the extended rom that creates the MMS folder in the messaging application.
After you've done all this you'll notice a considerable improvement over the o2 rom with all the crapola installed.
I've also used lokiwizard to unlock it all.
Not tried the qtek rom or the new i-mate one... as I don't use push-email or the like and haven't found any considerable bugs yet I don't need to.
I have found naggaly features which after installing the RegistryWizard, NullKbd and a few others... they seemed to be solved!
I recently updated my O2 mini S 1.5.4.... rom to the new imate one and i must give my approval for upgrading to this rom. Its faster, more stable, is much better on battery life for some reason.
I recently updated my O2 mini S 1.5.4.... rom to the new iMate one
Click to expand...
Click to collapse
Where can I get this. It does not appear to be in the Rom download area (or is it under a different name?)
its in this thread http://forum.xda-developers.com/viewtopic.php?t=42638&postdays=0&postorder=asc&start=0
Well I successfully upgraded to the new i-mate ROM and it's MUCH faster. There's a lot less lag when sliding the keyboard in & out, and the general responsiveness of the device is considerably better.
I've managed to get GPRS working, and I've installed the MMS cab but I can't send or receive MMS's at the moment - it keeps telling me that it couldn't send the message. So I'm going to post elsewhere in this forum and check that I've got the correct MMS settings.
Overall though, I'd definately recommend upgrading to this ROM. Just remember to use Total Commander to take a backup of the O2 Extended ROM beforehand so that you've got the MMS cab-file available to install at a later date.
Excellent. Thanks for the feedback. I may well give it a go later today.
John
Code:
Just remember to use Total Commander to take a backup
Is this the one from Ghisler.com?
I downloaded this but cannot find any instructions or reference to backing up the Rom. Any idea where I can get the instructions (if there are any).
Code:
browse to the /extended_rom/ directory
I cannot see this in the Total Commander Directory list.
Any suggestions appreciated.
Just got my o2 mini s a couple of days ago and I am loving it soo far!!
However, I already encountered a couple of bugs - the system laggss REALLLI bad, like when the slider is pushed out, even when closing/running certain programs the device hangs. Also, I have seen a couple of times where the "phone" application will not load up. In all these cases I have had to do a soft reset on the device.
I am thinking of upgrading the rom - but this is my first pda, and i know nothing at all about fidgeting with the software. I don't want to mess up such an expensive phone so is it pretty easy to do?
w_2k20a:
I too want to be careful.
I have 2 phones, and my O2 Mini S is slow compared to my MDA Vario.
So I am going to try and run an update to replace the ROM on the O2 with the newer one on the Vario, and also get rid of the O2 add-ins which are what slow it down apparently.
I will try this first because I have read about so many problems with the latest I-mate one, and it is not easy to return to the original ROM if it does give problems (although it is possible it seems tricky) - I may the Imate one later if I need to.
The ROM for the Vario (along with others) is here:
ftp://[email protected]/Wizard/Roms/Tmobile/ - use password xda
Its the UK one.
But first I backed up my Mini ROM. I used awizard to do this. Read this thread:
http://forum.xda-developers.com/viewtopic.php?t=43399
I think that you will find that using the awizard (get it from this link)
http://forum.xda-developers.com/viewtopic.php?t=37386&postdays=0&postorder=asc&start=0
the backup part is easy. I have done that quite successfully.
Good Luck.

Tom HTC Artemis Rom v2.00.01 PDAVIET How to install?

First I want to say sorry!
I have troobles to understand how to install it on my French HTC P3300 .
Can I?
Could someone explain me how to?
Thanx,
Andy
traxer said:
First I want to say sorry! I have troobles to understand how to install it on my French HTC P3300 . Can I?
Could someone explain me how to?
Click to expand...
Click to collapse
Sorry for what? Normally it is not necessary to open a new threat for any question that you might have, just join the different threats about a particular subject.
I guess you are new to all this upgrading stuff. First of all, and most important, is to find out whether your device is cid-locked or not. I think that it is safe to say that when you got your device through a telephone provider, like Orange or T-Mobile, at a very cheap price, then the device is locked and you should have it unlocked before flashing any ROM (except the official ones that you can download from your providers site). When you bought your device retail, at the full price (the Artemis is sold around 500 euro's), then the device is not locked.
Upgrading itself can be pretty straightforward: just establish an ActiveSync connection, run the <ROM name>.exe from your pc and follow the instructions on your screen.
grun said:
Sorry for what? Normally it is not necessary to open a new threat for any question that you might have, just join the different threats about a particular subject.
I guess you are new to all this upgrading stuff. First of all, and most important, is to find out whether your device is cid-locked or not. I think that it is safe to say that when you got your device through a telephone provider, like Orange or T-Mobile, at a very cheap price, then the device is locked and you should have it unlocked before flashing any ROM (except the official ones that you can download from your providers site). When you bought your device retail, at the full price (the Artemis is sold around 500 euro's), then the device is not locked.
Upgrading itself can be pretty straightforward: just establish an ActiveSync connection, run the <ROM name>.exe from your pc and follow the instructions on your screen.
Click to expand...
Click to collapse
I got it, but can I know if the device is locked or not? Is there any kind of test or software that do this?
thanx in advance
Claudio
cfrs said:
I got it, but can I know if the device is locked or not? Is there any kind of test or software that do this?
Click to expand...
Click to collapse
Unfortunately, no, not really. On older HTC models you could find out by running the mtty tool, but it doesn't work on the Artemis. I read somewhere that on our device that whole locking (and unlocking) method is quite different than on other models. That is also why it seems so hard to develop a free unlock tool for the Artemis.
The only way you can be absolutely sure is by running the unlock tool from imei-check, but they will charge you for it.
If you just THINK that your device might be unlocked, then I would not recommend to try flashing any other than an official ROM. Of course, it is your choice and you might want to take the risk. That risk is that your phone will become 'bricked' and won't start normally. The only way out of that situation is returning it to the seller to have it restored. Some people with a bricked phone however are able to restore it themselves with the original ROM, so make sure that you have that ROM available. Some original ROMs can be found on the internet, but not all of them.
sorry but you said
Upgrading itself can be pretty straightforward: just establish an ActiveSync connection, run the <ROM name>.exe from your pc and follow the instructions on your screen.
But if i want flash in my artemis a rom like this one Rom v2.00.02 PV for HTC Artemis ( Crossbow Style ) how can i do that?
Ther are no exe file inside but only one similar with bat extension??
Can you help me please
Thank you
Andreazzo
andreazzo said:
sorry but you said
Upgrading itself can be pretty straightforward: just establish an ActiveSync connection, run the <ROM name>.exe from your pc and follow the instructions on your screen.
But if i want flash in my artemis a rom like this one Rom v2.00.02 PV for HTC Artemis ( Crossbow Style ) how can i do that?
Ther are no exe file inside but only one similar with bat extension??
Can you help me please
Thank you
Andreazzo
Click to expand...
Click to collapse
Just connect the USB, let activesync make the connection and start the BAT file in the dir of the rom... wait 30min
grun said:
I guess you are new to all this upgrading stuff. First of all, and most important, is to find out whether your device is cid-locked or not. I think that it is safe to say that when you got your device through a telephone provider, like Orange or T-Mobile, at a very cheap price, then the device is locked and you should have it unlocked before flashing any ROM (except the official ones that you can download from your providers site). When you bought your device retail, at the full price (the Artemis is sold around 500 euro's), then the device is not locked.
Click to expand...
Click to collapse
Andreazzo,
Your Artemis, does it have a logo on the body. A logo from maybe T-mobile, Orange, Vodafone, O2 or whatever telecom provider?
If yes, the you shouldn't flash your device with v2.00.02 PV for HTC Artemis ( Crossbow Style ), because the chances are that you will brick it.
If your P3300 only has the HTC logo, then it is fully unlocked and you can flash whatever rom (flavor) you want for the Artemis.
So be aware of the fact. The life of your P3300 is in your hands.
This it is not probably true information. This it is not to end rule
My Artemis he had only logo on body. The logo of start take-off was the only HTC also. No trace T Mobile Orange O2 Vodafone. And I have brick. :{
I tried flash by bootloader however still announcement INVALID ID
Follow for voice grun. get rid (remove) CID - will not it be dust brick as I.
Read this ... http://forum.xda-developers.com/showthread.php?t=306904
Can anyone link me to a page where I can find all HTC Artemis Roms
TalhaQasim said:
Can anyone link me to a page where I can find all HTC Artemis Roms
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Artemis_DumpedRoms
Is the SEARCH button broken today?

I need WM5 Japanese version ASAP

S O S
Hi, all
My Hermes' touch screen is dead. I returned it to softbank to get it fixed, but it was sent back to me from the manufacturer. The manufacturer report says that it is because I changed the ROM. Yes I did. You can read part of history of ROMs I ever tried.
Now, I need to reinstall the original WM5 Japanese version as I got it for the first time. I tried to find the ROM in the CD but there is nothing except ms office.
Does anyone have WM5 Japanese version, so I can download it and install it to my hermes?
I heard it that I have to modified the nbh file since I installed HardSPL already? How to modify nbh file?
Thanks in advance..
Sorry,
I got the ROM from this
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
However, the screen alignment software doesn't work. It works when I use it to flash my hermes into other English ROM.
I got the screen alignment software from this
http://www.codefactory.es/descargas/family_1/product_3/MSP_RemoteAlignment.zip
Any help??
I failed to convince softbank x01ht manufacturer to get my device fixed. sadly, i think it's the end of the toy.
RIP my Softbank X01HT, July 24th 2008.
Damn SoftBank, its always like this. We just HAVE to be sure to downgrade to original ROMs when we deal with them...
What did they actually say to you?
Zgembo said:
Damn SoftBank, its always like this. We just HAVE to be sure to downgrade to original ROMs when we deal with them...
What did they actually say to you?
Click to expand...
Click to collapse
what I saw from the report the manufacturer sent with my hermes back to softbank shop was they didn't accept the phone coz the ROM has been changed.
My fault is I didn't change it to Japanese ROM first before sending it. I did try but I couldn't by passing the screen alignment screen in Japanese ROM. Screen alignment software doesn't work in Japanese ROM.
I thing I knew the culprit. I should have removed the .lnk file in windows folder after flashing. But it's too late now..

How to Hack SPL 1.24

Hi All,
After spending a large amount of time trying to find a solution for the SPL 1.24 to hack. Mainly the Telstra Australia WM6.5 Upgrade. Combining the many efforts of XDA Members I finally got a proper working hack going. I thought I'd post it straight away for the rest of the world to see.
First what you need to do is download the WM6.5 Upgrade from the HTC Website. When you open this you need to go to Start - Run - Type %TEMP% Find the location where the extractor has dumped the files and rename RUU_Signed.nbh to MAPLIMG.nbh. Copy this to the root of the SD Card. Reset your phone into Bootloader and let the flash start. It will fail at 10% than reset itself and install it properly.
From here you need to download a cab clearsecurity.cab which is suppose to be for the Samsung Blackjack 2 but it enables the HTC Snap to be hacked.
From there download the desired Custom Rom and run 1.19 auto.bat and watch the screen go black and the custom rom install.
Any Success???
Hi, can anyone let me know if they have had the same success???
Hi Roger,
Thanks for the post as it worked a treat for me, I was able to flash the HTC Snap after following the above steps. One thing I didn't do is backup the Telstra spl 1.24, Do you know where I can get a copy from?
Once again thanks for the post.
Mr.D
THis looks great. I'd love to try this now, but before I do, I'm hoping you might be able to answer a question of mine, to ease my mind:
If you need to reinstall the original Rom and SPL 1.24, is there any way the the Telecom company can see that the phone's firmware has been previously changed?
Thanks.
Flashing back to Telstra 6.5 Rom
Hey guys, I believe you can just download the latest 6.5 Telstra Rom for the snap from the HTC website. I havern't tried it since I have hacked the phone and the only reason why you would obviously do it is for warranty. Actually I also found out that you can get WM 6.1 rom but you need to contact HTC and you can upload it from there FTP. Sorry I can't provide any more assitance maybe when my phone breaks and I need to flash it back I will post up what I have done.
Hi Roger
Thanks for the reply. This is what's stopping me from trying to flash the ROM. Knowing whether I can restore it back to it's original condition without the telecom company knowing it's been flashed. The phone is only new and if it does develop a hardware problem and I had to send it back, I'm sure they won't fix it under the warranty if they can see that it's been flashed.
If as you suggest, it's just a matter of re-flashing it with the original rom, then that's fantastic. But, I'd really like some firm confirmation before going ahead.
The ROM developed by ookba looks AMAZING and I can't wait to try it.
Thanks.
Flashing Advice
Hi Badcam,
I have owned many HTC phones and I have to say the Snap is probably the most durable out of them all. I find with the Snap and the newer models of the HTC phones from australian carriers they really lock them down and you don't get the full functions as what you pay for. Worst of all they infest the phone with all these carrier features that are not needed.
It is really your choice flashing your phone. Every single phone I have had I have flashed and never had problems only when I drop them lol. For warranty purposes you can always flash back to orginal rom and just tell them thats how you got it. They really can't say much. But I did abit of reading and when you do upgrade the rom from HTC website it does install SPL 1.24 back meaning if you want to flash it back you need to go through the hack again.
Hope this has been helpful.
You said it Roger.
There's so much Telecom rubbish on this phone, it's not funny.
Well, I'll give it a go this weekend. If you're happy it's going to work, I am too. Thanks very much for your advice.
Hey do you guys know how much (in USD) a Telstra SNAP is out there if you buy it outright? Can can anyone ship me one to the States?
What about a TelecomNZ one?
http://store.telecom.co.nz/mobile/pay-monthly/htc-s523
NZ$499.00 is around US$361
http://www.xe.com/ucc/convert.cgi?Amount=499.00&From=NZD&To=USD&x=16&y=17
I'd be happy to sort something out for you. PM me if you'd like.
(Sneaks off to check profile to see if it's switched on...)
Badcam said:
What about a TelecomNZ one?
http://store.telecom.co.nz/mobile/pay-monthly/htc-s523
NZ$499.00 is around US$361
http://www.xe.com/ucc/convert.cgi?Amount=499.00&From=NZD&To=USD&x=16&y=17
I'd be happy to sort something out for you. PM me if you'd like.
(Sneaks off to check profile to see if it's switched on...)
Click to expand...
Click to collapse
Thanks but that's kinda rough. I get the MAPL100 (Dash 3G) here for $100. Looking to get a SNAP S523 for around that, even used. Let me know if you run across one. Thanks!
It's atrocious. Believe it or not, that's a good price. It's just come down NZ$200. Of course, I had to buy my two days before the reduced it.
I'll keep an eye out.
roger.higginbotham said:
Hi, can anyone let me know if they have had the same success???
Click to expand...
Click to collapse
Hi, can anyone tell me how to get the device into bootloader mode? i have followed the steps, but getting it into bootloader mode and then letting it hardspl from the sd is not happening :-( THANKS!!!
Can't find clearsecurity.cab. Can anyone tell me where to find it?
Attempt to answer questions lol
Benzin,
Type in google "clearsecurity.cab download" and find the mediafire link
If you have problems please let me know. Maybe XDA-Developers already have it posted.
wcampagne,
So you are getting into bootloader right, its just not picking up the MAPLIMG.nbh file. You have renamed RUU_Signed.nbh to MAPLIMG.nbh. Also a train of through if you have tried applying previous Roms before hand I suggest you go to %TEMP% file and remove anything that is there that has reference to RUU_Signed or the rom at all. You are probably uploading the wrong file as it might be cached. As I said its just a train of thought. If you have any more problems please feel free to post up and I will figure out a fix for you.
Ookba,
Ebay is your best bet. I got my handset for $150 AUD brand new on bid.
Works great for me and I thank you so much!

[Q] can i pay someone to flash my ROM, please

I just got a used HTC Universal. It had a generic WM5 install on it. I came here, looking for a WM6.x ROM. A couple years ago, I had great success doing this with an HTC Wizard (which I still have) -- I know how to flash a ROM. However, with the Universal, I am not having any luck.
The device comes up in bootloader mode just fine. But no ROM I have tried, ever boots up. I have tried the MTTY DOC format, I have tried using MaUpgradeUT, I have tried using the ROMUpgradeUT.exe that comes with the ROM's... nothing seems to work. If I understand the various posts here -- the device is acting like the Carrier ID is still set, and no ROM will work until I clear the CID and/or find a ROM that matches the CID. But, I thought that the MAUpgradeUT was supposed to clear out the CID? Is there another utlity for that?
I have spent basically 8 hours today, trying to get this to work... I am willing to ship this to someone in the US and pay $$$ to get it working again. It's a nice device (looks brand new) and I really want to use it. It was working just fine on WM5, until I got the bright idea to re-flash it.
Can anyone help?
hi again... found a copy of TML v8[1].7.1 21028 regular 64MB and IT WORKED!. My phone is no longer stuck in bootloader limbo.
however, this ROM seems to be hard-wired to look for a TMobile network? I have an AT&T GSM SIM... my phone isn't connecting to my provider, at the moment.
THanks to all for past and future help.
--- KSandbergFL
Closing thread as you solved your problem on other thread.
Please next time do not open multi threads for the same topic and we recommend you to not offer money as XDA is about helping and sharing, instead you can donate to the member who helped you

Categories

Resources