Out of curiosity, I tried to upgrade my XDA2i to the WM5 for BA.
Here what I did
1.) Used the noID utility exe. It says the phone will be upgraded to CE V1.40
2.) Succesfully upgraded.
3) Then it says to perform cold boot. I tried to press power + reset button but no success. I also tried to press power + voice recording button + camera + reset button but no luck
Any help will be very much appreciated.
thanks
I ALREADY TOLD U , U CANNOT USE THIS ROM ON UR DEVICE !!!!! I WONDER WHY U USUALLY ASK QUESTIONS IF U DO WHAT IN UR HEAD !! :!: :!: :!: :shock:
Soo.. does this ,means that no WM5 in XDA IIi ever work ?
ahh damn >_< gotta buy new PDA then :-(
AlbertWT said:
Soo.. does this ,means that no WM5 in XDA IIi ever work ?
ahh damn >_< gotta buy new PDA then :-(
Click to expand...
Click to collapse
yes, there's NO WM5 for Alpine!
you shoud read, Read, READ!!!
upgrade back to Xda IIi ROM.
thank yow for the info, i'm going to do just that!.
Try This site
I kill mine too. however, I managed to save back my O2i
Try this site:
http://www.maxishare.net/en/file/37...-1-04-bluetooth-patched-camera-fixed-rar.html
Related
Hello Wallaby-Users.....
New Upgrade-Option is waiting for you.
Hope to release soon a WM2003SE-Edition for the Wallaby.....
More Infos coming soon here in ths thread.
See some screenshots:
WOOOOHOOOOO!!!!!!!! WEEEE!!!!! YOU ARE OUR MAN!!!!
LumpiStefan said:
Hello Wallaby-Users.....
New Upgrade-Option is waiting for you.
Hope to release soon a WM2003SE-Edition for the Wallaby.....
More Infos coming soon here in ths thread.
See some screenshots:
Click to expand...
Click to collapse
Btw if you need a PW10A1 tester, you can mail me/find me on msn: [email protected]
Ok. Now it´s done .....
Rom is available.
Until now there are a few linitations with this ROM:
1.) Bootimage are not adjustable. Needs more investigations
2.) Flashing is only via EXE-File possible, because this ROMs are little bit bigger than the normal an xdatools checks the filesize.....
3.) Part of ROm that was reserved for backup is used in this ROM, so those data will be destroyed while flashing.....
ROM is available without any additional Programs (Download the Attachement) and also already included in the kitchen (http://lumpistefan.dyndns.org/).
I cannot gurantee, that all is working fine. So flashing is on your own risc....
Also it would be great if some nice guys donate for the xda-developers or for me. Link ares available here and on my kitchen....
If you have any problems, please use this thread, PM to me or Email....
Have fun with the new ROM...
Stefan
LumpiStefan Gr8 Work
In the rom kitchen it's available with additional file size after adding some softs it's 16.1 , is it safe to flash it?
You are our man once again! cooked a rom in the kitchen, flashed it, works flawlessly....THANK YOU!
Does it still have the SD-erase bug?
KTamas said:
You are our man once again! cooked a rom in the kitchen, flashed it, works flawlessly....THANK YOU!
Click to expand...
Click to collapse
Is it fast, working normaly, buggy?! tell me I'm excited heheh
ramram said:
KTamas said:
You are our man once again! cooked a rom in the kitchen, flashed it, works flawlessly....THANK YOU!
Click to expand...
Click to collapse
Is it fast, working normaly, buggy?! tell me I'm excited heheh
Click to expand...
Click to collapse
It is faster than WM2003
when will it be revealed in german?
It's working good and it's faster- movies works faster.
I hope that SD card erase bug is fixed.
I tested it, so far working and fast. I'm just waiting the Sd-Erasure bugg... I hope it wont happen....
theholysaint said:
when will it be revealed in german?
Click to expand...
Click to collapse
I think never. :-(
Stefan
KTamas said:
Does it still have the SD-erase bug?
Click to expand...
Click to collapse
Don´t know. Myself only had this problem one time in using the xda with WM2003 for 1 1/2 Year. WM2003SE i have running now for 2 days. So i can´t tell it really....
Stefan
Hi Stefan,
i am geting GetDeviseData error, any idea? btw thanks for great work
LumpiStefan said:
KTamas said:
Does it still have the SD-erase bug?
Click to expand...
Click to collapse
Don´t know. Myself only had this problem one time in using the xda with WM2003 for 1 1/2 Year. WM2003SE i have running now for 2 days. So i can´t tell it really....
Stefan
Click to expand...
Click to collapse
I think it does not (i repeat, i THINK). The sd-erase bug was a bug in Windows CE 4.2 (WM2003 based on that), and there were a patch that correct that bug (if you have the WCE4.2 source of course ), so WM2003SE should be patched.
kamiar said:
i am geting GetDeviseData error, any idea? btw thanks for great work
Click to expand...
Click to collapse
There are 2 possibilities:
1.) Wrong device. This only works with Wallaby devices (XDA I / MDA I / ... )
2.) You have rom that prohibits flashing via exe (e.g. 4.01.16) Than you have to downgrade first via SD-card (e.g. Special Edition ROM) and then upgrade to WM2003SE
HTH
Stefan
As I remember I flashed my device with this ROM long time ago, Lumpistefan you finnaly sort it out to let it work GOOD WORK!!!! :wink:
were can i gt the patch
im trying to upgrade i dont have the patch yet sd eraser.
Hi,
I had rom 4.01 and had to downgrade to 3.17 with SD to be able to upgrade to 2003SE, i did that but now it hangs at boot screen and the problem is that i dont have a card reader and even can not sync, how can i make another image on SD or any other solution?pls
Thanks
pls help i test it
Search google for "Goatse". Download Atom Goatse V0.5. That's the best working version.
Try it and let us know how it goes!
If you can't find it, have a look on this forum using the search button above.
V
:lol:
Hi I am not able to find this software. Also ATOM, has windows Mobile 5 and i guess magician doesnt support WM5...
Manmohan
very cool vijay :lol: :lol:
The fools are out there... And they want to destroy... THEIR DEVICES!!!
veisen said:
pls help i test it
Click to expand...
Click to collapse
If you try it your device will die.
My unit is working fine..can make receieve calls etc...
Am running on Meschle's 2.11 lite....hard reset fine everything fine...
When I try to upgrade to the full version - Gives me error...Connection.check cradle etc...
Tried Official ROM - same problem
Tried Manual Bootloader - goes into a white screen and hangs...then after 4-5 minutes i see the colored screen with IPL 3.04.0001 and SPL 1.11.000...
if I reset goes back to the ROM that was there on it...works fine...
Did I just brick my phone?
Not that I am not happy with it...but then why the Bootloader and flashing is not working?
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
NikMel said:
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
Click to expand...
Click to collapse
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
hehe
nice
devdarshan said:
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
Click to expand...
Click to collapse
NikMel said:
nice
Click to expand...
Click to collapse
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
tongphan said:
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
Click to expand...
Click to collapse
NikMel said:
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
Click to expand...
Click to collapse
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
tongphan said:
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
Click to expand...
Click to collapse
NikMel said:
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
Click to expand...
Click to collapse
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
I can't tell you for sure if this procedure will work for your pda.
this works on artemis or p3300 or dopod p800
tongphan said:
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
Click to expand...
Click to collapse
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Arura said:
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
Click to expand...
Click to collapse
NikMel said:
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Click to expand...
Click to collapse
Found donate! link in the bar.
hehe OK
Arura said:
Found donate! link in the bar.
Click to expand...
Click to collapse
NikMel said:
hehe OK
Click to expand...
Click to collapse
I meant navigation bar!
Sorry for my english I have problem with my Xda Exec . I load to ma Xda Ranju 7.6 and phone star everythings look ok but when a I whant to write and sms or somethings else my keyboard doesnt work only power and reset button works.I can use only touchscreen keyborad to write sms or anything.
Could you help me??I also try load ranju 7.4 but my fon stop on the O2 picture and doesnt start.
I dont know what should i do?
Try latest 7.7 or different rom
okey
a try yhe 7.7 but when a have 99% it show error and i load to my phone nkG4PP5 2this nbf file and upgred and my keyboard works now but now I don' have mms option i meesaging a will work with but if anyone know what should I do pleas say it
tomasek77 said:
Sorry for my english I have problem with my Xda Exec . I load to ma Xda Ranju 7.6 and phone star everythings look ok but when a I whant to write and sms or somethings else my keyboard doesnt work only power and reset button works.I can use only touchscreen keyborad to write sms or anything.
Could you help me??I also try load ranju 7.4 but my fon stop on the O2 picture and doesnt start.
I dont know what should i do?
Click to expand...
Click to collapse
WARNING for ranjus roms! They make your phone crazy..
knetan said:
WARNING for ranjus roms! They make your phone crazy..
Click to expand...
Click to collapse
That´s not true mate.....
tomasek77 said:
Sorry for my english I have problem with my Xda Exec . I load to ma Xda Ranju 7.6 and phone star everythings look ok but when a I whant to write and sms or somethings else my keyboard doesnt work only power and reset button works.I can use only touchscreen keyborad to write sms or anything.
Could you help me??I also try load ranju 7.4 but my fon stop on the O2 picture and doesnt start.
I dont know what should i do?
Click to expand...
Click to collapse
I would recommend to reinstall the ROM 7.6 and test it before installing any other software, perhaps this way you can identify what is causing this.
In my experience Tomal´s v7.6 is the best I´ve tested, and believe me I have tested severals. Stable fast simply the best!
Hope this helps and good luck!
orb3000 said:
I would recommend to reinstall the ROM 7.6 and test it before installing any other software, perhaps this way you can identify what is causing this.
In my experience Tomal´s v7.6 is the best I´ve tested, and believe me I have tested severals. Stable fast simply the best!
Hope this helps and good luck!
Click to expand...
Click to collapse
for you v7.6 or 8.2 best now?
thanks a lot
rod555 said:
for you v7.6 or 8.2 best now?
thanks a lot
Click to expand...
Click to collapse
I´m still with v7.6 as 8.2 was developed with out any after test as Tomal broke his Uni.
I´ll wait for Tomal to recieve his new Uni that some of us donated to him, and then I´m sure he will test 8.2 fully or develop another version.
Cheers,
Hi all,
i need your help, my xda ii mini was lost all program , how to re install again?
i didn't know what ROM and other device, please help me cause its only my stuff..
thanks guys..
not sure what you mean but if it is stuff like the windows folder having stuff missing, do a hard reset (the little button at the botton+power held down). that should get rid of everything and put all the main files back on like it can out of the factory
fajarwawa said:
Hi all,
i need your help, my xda ii mini was lost all program , how to re install again?
i didn't know what ROM and other device, please help me cause its only my stuff..
thanks guys..
Click to expand...
Click to collapse
Did you have forget to charge the battery?