SOLVED: Phone Does Not Work After Upgrading To WM2005 - MDA II, XDA II, 2060 General

History of my XDA 2:
• Supplied with WM2003, no problems.
• Upgraded to WM2003SE, no problems.
• Recently upgraded to WM2005, phone did not work ("No Service" everywhere I went).
• Downgraded to WM2003SE, no problems, phone works fine.
• Tried upgrading to WM2005 again, phone does not work again.
I have tried everything I can logically think of to try and get the phone to work. I have checked the country setting (UK), phone settings (all looks fine, but I'm not 100% sure what the settings should be), unlocked my phone using xda2unlock, and tried different sims.
I'm using the BuzzDev 60b.96 release. Has anyone else had this problem?
Update: I've just remembered that my phone did work for a while after upgrading to WM2005. It might have been some program I installed that caused the problem. I've also noticed that when I downgraded to WM2003 and upgraded to WM2005 again, all my settings and programs I installed in WM2005 originally are still there. Does anyone know how to reset the memory completely so my programs and settings in WM2005 will be reset to a clean installation?
Update 2 - Problem Solved!: I've just performed a format by holding the Camera and Record button while doing a reset, and WM2005 just reinstalled. Now the phone works fine!

Try this ...
As for your preinstalled software which doesn't seem to get erased when updating your rom, simply downgrade your ppc to wm2003se and install the extended rom unlocker. Then unlock and unhide your extended rom. Then from file explorer go to your (storage) drive and delete everything inside the drive and then go to your extended rom drive and delete everything there. This should remove any installed software from your pre-wm2005 installation.
Now as for your radio problem, I would suggest you use either radio rom version 1.17 or 1.18 and see which one works. Now if you've tried upgrading your ppc using only buzz lightyears os rom WHICH DOES NOT INCLUDE the radio rom, then you've only upgraded your os rom and have used your pre-existing radio rom that was properly running on wm2003se but seemed to fail on wm20051.6b. Now, in this case, I would suggest you either download radio versions 1.17 or 1.18 nb files and adding them to your os update setup directory along with buss lightyear's wm2005 1.6b You can find both radio versions on our FTP site
ftp://ftp.xda-developers.com/Himalaya_SEs/Radio/
From there you can try both radio roms and see which one works best with u. Good Luck ;-) Tareq A.N

Related

soft reset when removing from cradle WM2003

I have recently noticed that my XDA resets itelf fairly regulalry when removing it from the cradle. Has anyone else been facing these problems.
I am running the following
XDA 64MB version
ROM 4.00.05 ENG
ROM date 06/05/03
Radio Version 4.21.00
This ROM was created from jsummer's ROM kitchen.
Many thanks,
Hasnain
Yes I've heard that happening with the iPAQ, but this the first I've heard
of it happening on an XDA though!
If I remember correctly a hard reset should resolve it.
BTW what software do you have installed?
HTH
thAT HAPPENS WITH MY XDA AS WELL EXCEPT I HAVE POCKET PC 2002 BUT IT STARTED HAPPNING SINCE I UP DATED MY ROM AND RADIO VERSION
The only extra software is the s/w that I have got installed with the ROM, including things like PhoneExt, File Commander, nPop and many of the default XDA Kitchen extras.
Also installed is Calendar+
Thanks,
Hasnain
I am having a similar problem with PC 2002 where I get soft reboots at random times...
Is this a known issue with the XDA? and do you think a hard reset will help?
Thanks,
J
check your startup dir under windows if you find a stk.lnk move it out and try and even try with other files

HTC Alpine radio 1.04!!!

Here is rom with new Radio ROM 1.04
http://extendedsystems.dk/download/qtek/2020i/WWE_Sonofon_11100_165_10400_Ship.exe
Enjoy
Thank for the new radio, but some how I got country erro on the processing upgrade.
Please Help.
is this for the xda 2i please ..only asking as i'm not sure
thanks
This rom is only for Alpine phones, thats the 2i, 2020i etc.
As soon as my broadband is working again (tomorrow hopefully) I'll post the O2 162 rom with the radio 1.04 update for the UK users and anyone else who wants it.
If you want to try this update on the 2i you will need to extract the files from the installer and locate a copy of maupgradeut_noid.exe and use that instead of the included installer. There are better instructions elsewhere on this site, just do a search for my name, I'll be in amongst it all somewhere.
cheers i'll give it a go but if you are doing it maybe i'll wait ,i've only just gone back to your old 1 tonight as i don't use blackberry & it seemed better than o2 update
I have just posted the ROM upgrade on the ftp site, the only change is the radio from 1.03 to 1.04. It seems to give a better signal strength than version 1.03 on my phone anyway.
Here's the link to download the O2 version I just combined
(Edited to working link
ftp://xda:[email protected] XDA_IIi_Upgrade_v1.11.162_Radio_1.04.rar
1: Backup your contacts/device to Storage, Storage Card or PC. If you are using Ext Rom 1.11.162 now you can use full device backup to restore at the end to save you re-installing all your programs later.
2: Extract the ROM using Winrar to a folder of your choice.
3: Run MaUpgradeUT_Noid.exe. The install will fail, don't worry, just run it again without touching the phone.
4: When the upgrade has finished, do a hard reset by pressing the power button and reset button at the same time.
5: Install any programs and any data you backed up during step 1.
Good luck.
Excellent stuff
Upgraded and now running 1.04 radio and i can also say it has improved my signal strength too
Big thanks Pug for your work on the ROM image too, very much appreciated.
Hear, Hear. Many thanks to Pug, great work!
many thanks to Pug,
its work perfectly.....no more lag of ringtones or lag after green button pushed!! thanks Pug.....
i want to know about backup, after upgrade ROM, i cant restore back by backup. When using Backup Sprite, i will go back to old ROM after restore complete. any ideas????
@ Clustered
When you say it goes back to the old rom do you mean that the Radio rom is regerted back to 1.03 or that your extended rom goes back to 192 or whichever you are using?
Sprite backup should not revert the radio rom back to 1.03 as it should only do the file system of your device.
As far as the extended ROM version, all it is there for is to indicate the "update" status of the extended ROM and what software is installed in it. An asian rom may have a higher rom version but may be no newer or better than the european 162 rom. You're talking about comparing hedgehogs to wibbles, completely arbitary. As soon as you cook the extended ROM like I have it is completely meaningless anyway as the version number is no longer valid.
If you wish to change the version number yourself, use a registry editor and go to:
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\3RDVERSION and change the MSYSTEM value to whatever you like.
If I have the wrong end of the stick, I apologise otherwise I hope this helps.
huh!? are u mad at me ??? anyway, i just wanna tell that you're the great! thanks very much....
I'm not mad at you, just woke up from a night shift....bloody binmen.
Was just trying to figure out which rom was reverting and so on. Hope it was of use to you anyway.
Once again, sorry.
HELP!
I Can't Upgrade the ROM.
step 1 is OK (radio)
Step 2 is OK (EXT):
Step 3 to 8 % PC show : Error 112: CE ROM UPDATE ERROR
WHY???
i run the MaUpgradeUt_noID.exe second Time , but frist Run MaUpgradeUt_noID.exe Need to STOP(use TASK Manager)??
PLEASE HELP ME
thanks for the update ..it's upgrading at the moment
thanks for the update, the only problem i'm having is that even though i've got the in call volume as low as it will go it is still too loud to be comfortable which is a big change from the previous rom. Also when using in the car on handsfree the other person can hear his voice echoing as they speak. Any ideas????
Successfully upgraded my XDAIIi.....
I'm now with the latest ROM from O2 UK (1.11.169 WWE) and the Radio version 1.04.00
Hi, I'm from Malaysia and will this rom be able to use on my device?
I'm using XDA IIi and device id is PH10C.
I'm affraid there will be a problem for my local operator "Maxis".
@ ramnkc
To be honest I can't see a problem with this ROM working with your current operator. I'm pretty sure that others from your neck of the woods are using the ROM with no problems. The biggest problem you would have is that it wouldn't load all your GPRS, WAP, MMS, etc settings as it is a UK rom.
Make sure you can get hold of these settings off your current provider before you perform the upgrade. Or as an alternative, extract your current ROM and reload it back onto your phone using SD card.
thanks for the reply !
Well i guess i gonna wait for the official release coz so far i'm happy with it. Apart of the constant SD Card data missing after playback mid, mp3 or what ever music files from SD Card.
And i finally found out that it cause by SBP pocketplus which had an option to close all application once you tab on X. Once i turn that option off in pocket plus so far problem free.
Guys/gals out there have this problem ?
ykyloveu - Does this mean you have BB Connect as well? The only modified rom from here I can download is based on cer .112 The new rom for o2 with BBConnect is ver .169

Installation Problem - Paragon Software

Hiya All,
I'm trying to install Hebrew language extender on my Imate Jam rom 1.12
I'de a previous version installed which was fine, tried to uninstall and install a new version because of some minor problems which I though that will be solved in the newer version.
The problem is that during the installation, the install wizard tries to install tahoma and tahomabd fonts to the ppc device and fails in that operation.
The exact error message is "Can't copy C:\Windows\Fonts\\tahoma.ttf", yep with double "\\".
I've also tried to copy the original version which I'd but stayed with the same results.
Any opinion on how to solve this mistery ?
Thanks in advanced,
Bright Star
Sorry, I can't help you with that, but I can confirm that this software is very bad for your Magician.
I purchased the Danish version and ran it for some time. During that period I had a LOT of problems with the BT icon dissapearing.
I started noticing that after a hard reset, the icon was always there until I installed the Language Extender, and then it was gone! Sure enough, since I stopped using this program, my BT icon problems has nearly dissapeared.
So unless someone comes up with a better idea, all I can say is hard reset your Magician and don't use this crappy software again

2.xx ExtendedROM unlocker that work

The guys at :
http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=19287&catid=45
have this file:
http://buzzdev.net/components/com_simpleboard/uploaded/files/Prophet_ext_rom_unlock.rar
- unpack
- copy it over to your device
- run it
This will make your ExtendedROM writable, NOT visible.
Use TotalCommander CE to display content of your ExtendedROM for now (by entering "\Extended_Rom")
Sometimes, files in ExtendedROM are marked as READONLY and you have to clear that bit.
Does anybody has a good description of each file present in the Extended_Rom and if we can delete it or not?????
After readin that whole thread it seems some say it works some say it does not.
Can anyone confirm it works with the latest Submitter Cingular Rom? I do not want to have to reinstall everything again
I just got things perfect from the last Hard Reset I did.
I tried it on my 2.08 Qtek rom. Does not work (YET as Buzz is still trying!)
This was merely a test version btw.
I flashed my Qtek s200 with the lastest dopod rom (from the ftp page) then did a soft reset just before customisation begins (preventing the extrom files from loading - I don't use MMS or smartdialing).
Copy buzznet's prophet extrom exe onto your device and run it (You should get a little popup saying "success"). I can't view the extrom files and the memory settings are still the same but my system runs a lot faster and I've gone from having to do a soft reset almost twice a day to once every 5 or 6 days!! (I run a large program thats eats up RAM).
It seems so much more stable, reponsive and quicker
Hope this helps......
G
garywiscombe said:
I flashed my Qtek s200
Click to expand...
Click to collapse
This is why this stuff gets dangerous. The s200 is not the same as the Wizard from what I understand. Folks read things like this in what is a Wizard specific forum and think it's really working. On the buzzdev forums they seem to say it works on Prophet based devices and not on wizards.
That is why I asked here on a wizard specific forum about anyone having success.
From Bootloader / ROM structure perpective the Prophet and Wizard are said to be similar.
Buzz has developed his tool without any of these devices so hes still in a test phase.
Worked For me
with the last RRU Qtek IPL 2.15 Radio 2.30
Thanks
Herc.
XDA II
Hi guys
I tried it but it gives me message that it is not a valied Pocket PC application
the ExtROM version is 2.06 from PDAMobiz.com

WM2003, No Camera

Hello,
I flashed back to Windows Mobile 2003 SE after having windows mobile 6 installed.
The only problem is the camera does not work, There is no camera option in the menu, and when I press the camera button nothing happens.
The OS I flashed with is WM2003SE 2.06.00WWE XDA2 from the buzzdev website.
Any help?
Thanks.
sounds like you dident put in a new extended rom where the cam software autoinstall from
I searched on the forums for extended rom and found this :
http://forum.xda-developers.com/showthread.php?t=221732
So I put contents in my STORAGE, as per instructions, and now I am flashing, is this the correct way?
One Question, is there any newer WM2003 SE ROM avaliable for himalaya than WM2003SE 2.06.00WWE?
Edit : Nothing happened I still do not have camera, and I also notice My XDA II splashscreen is not showing up, instead it is a blank screen, probably some firmwares I flashed with earlier messed everything up on my himalaya.
Edit 2 : I manually looked through the extended rom contents and found the camera and installed it and a few other programs, but I get error "the program you have installed may not display properly because it was designed for a previous version of Windows Mobile software" nonetheless it works
extended rom is a nbf file like a real rom it include a list of cab files and a text file which list the cabs
after a hardreset it auto install all the cabs
you dont need to flash a nbf file (it's don the same way as a normal rom buzzdev prob got some)
about 2003SE then it's a bit of a bastard rom
it was never released (as far as i know) as WWE (world wide english)
but only as chineese and was manualy translated to english by fans (heard that there are still chineese bits around in the rom which display as garbage chars)
about a later 2003SE then there was another chineese rom 2.11 or something like that
but it was pretty unstable so never translated to english
personaly i were to drop wm6 wm6.1 or wm5 and go back i would go to wm2003 not se
version 1.77 as it's more stable so unless one need the rotate without a softreset (which is pretty much the only thing i recall SE offering )
About the EXTrom, i was never able to get it to install after Hard Reset, I have to manually install the cabs myself, ussually I remember my pocket PC would say "Please wait until your device is configuired" , then it would install a few things. But since I have began flashing with all sorts of firmwares I cant get the extrom contents to auto-install after hard reset, so i have to manually install them myself. And you are right, I am seeing weird garbage characters already after instaling the MMS programs from the extended rom contents.
But I do remember the first time i went to WM 2003 SE, which was a few years ago, I got the ROM from the offical o2 xda website, and it was perfect. But thats not longer available.
As for WM2003SE, I always thought it was an upgrade to 2003, I thought that SE (Second Edition) should be more stable.
I might just flash to WM2003, not second edition, do you know where I could find the ROM + Extended Rom contents for it ?
yeah it's 2th eddition
but wm is not more stable then the drivers and 3th party stuff
the rom have in them
also heard about a wwe 2003SE but never confirmed that it was around
maybe if you google deep and long enough you can find it
about official 2003 roms for himalaya then first place i would look would be
the ftp of this site they may still be there
2th would be around at buzzdev
3th would be on the sites or ftp's of o2 / tmobile/ imate and the likes
4th would be googling around
Ah the problem is the XDA Developers ftp site is not working. I looked over at buzzdev and they have no WM2003 Roms for the Himalaya, only WM2003 SE
Ok from XDA Developers ftp I find the following :
1.60.36 T-Mobile_NL_Shipped
Himalaya_T-Mobile_NL_1.72.903_eDsuBsofT
Himalaya_T-Mobile_NL_1.72.90_Shipped
Himalaya_T-Mobile_NL_1.75.903_eDsuBsofT
Qtekk_1.75_Converted
I believe they are all WM2003 (not se)
Which one to use?

Categories

Resources