WM 2003 SE Kitchen Version Install Failure - MDA, XDA, 1010 Software Upgrading

I cooked a WM 2003 SE ROM at Lumpistefan's but have been unable to get the exe file to install it. It keeps telling me about a communication error.
Has anyone had the same problem and found a fix? ActiveSynch appears to be working fine, and I have tried it on 2 PCs already.
Thanks

Found the answer in previous posting
Concernig your problem about Upgrade to WM2003SE. A mentiond 1000 times here in the forum, this causes from the t-mobile ROM installed on your device. You have to downgrade the ROM first to a "normal" ROM (like the Special Edition ROM) via SD-Card, and then you can upgrade via exe file to WM2003SE

Related

XDA w/ ppc2002 upgrade request help to 2003

Hi,
This probably the most asked question here yet I have one thing thats different to the others from what I have read.
I live in Australia, my 02 XDA ppc isnt sim locked or anything however my issue is related to the o/s I have ppc2002 I wanted to upgrade to 2003 and found a file for download and am unaware if this file is the correct file to download for upgrade to my XDA?
I also know I need a radiostack which will work on my XDa once it has been updated to 2003.
2003 file @ http://cuba.calyx.nl/~jsummers/XDA/PPC2003PE.nb1.zip
Radiostack which will work for me?????
Any help would be appreciated aswell as telling me what are the neccessary files on my PC to use to flash the ppc phone edition via my USB cradle also.
Any other info should be available with my profile.
Regards
A7MAD
Hi,
if ur phone works fine in making/receiveing calls, then all u need is a ROM upgrade. goto the kitchen at www.yorch.net and cook a ROM based on 4.00.05 ENG. select the file to be an exe file. download the file to ur PC and connect the xda to the cradle and make sure it's connected to power. run the exe and follow the instructions.
good luck
Hi,
Thanks Biso007 for all your info/help.
I am currently downloading the file that I 'cooked' as I type this out however one thing I was not sure about was in the string section was I to change the string to 4.00.05 as it was set on 3.16 ...
I did change it and its downloading I assume there should not be any issues.
If there is any concerns or if I did the wrong thing by that please inform me... BTW the file was made into an .exe.
Regards
A7MAD
Hi,
I visited www.yorch.net and 'cooked' my own ROM made it into an exe and have it downloaded right here it's a 4.05.00 rom flash but I have to ask what software can I use to flash the unit with because I do not have an SD card so I am stuck using my PC to do the flash, I have the official backup files for my ppc from 02's site so I am ok I guess if all else fails i will flash back to what I am currently using.
I wanted to flash the rom onto my ppc however what software can I use? I tried Microsofts Sync software I have 3.7 but it doesnt allow me to flash as it gives me an error message.
Message says:
"Your Device Information;
PW10A1:001
3.20
English
Your upgraded image info;
PW10A1:007
3.16
English
Please download the compatible utility and try again"
Any help would seriously be appreciated, but what is the compatible utility?
Regards
A7MAD
unfortunately this is a known issue with some ROMs that can't accept the exe method. you are stuck with the SD card upgrade.
Will adaptrom not work for this?

Can someone confirm XDAtools does not work with WM2003

I am trying to test out XDAtools and using the WM2003 AT&T rom but keep encountering problems trying to load my rom via programmeA I have had some help from others (see below) but it seems that XDAtools cannot manipulate WM2003? Can this be confirmed and if so I'll abandon this test.
Thank you Cgigate and ebswift maybe this is why I am encountering problems with my download and restore of my ROM. I inadvertently choose a WM2003 AT&T rom to practice with. Maybe I should have chosen a PPC 2002 ROM to test??
I thought I had a problem with XDAtools and that I did not have all the correct links/files in place. Maybe I should dump my ROM and try restoring a PPC2002 and then re try my test. Thanks again guys.
it worked for me
For your info, I used XDATools and Program A to burn AT&T latest ROM. I then flashed back to XDA Developer's SE ROM in order to unlock my phone. When that was done, I reflashed the AT&T ROM. All without hasle.
Did you use bootloader or ProgrammeA ?
Thanks viERJA when you say flash do you mean copied to the SD/MMC card and used the bootloader to load ??
i had 4.00.05 before and used XDAtools to upgrade to 4.01.00 without problems.
well since if you copy the rom to a sdcard and upgrade the rom using the bootloader then xdatools cant really be incopatible with mw2003 since it's the bootloader which do the updating and xdatools does the same thing to the sdcard if you are updating to 2002 or 2003 to and from 2002 and 2003
Good point Rudegar
Good point Rudegar, therefore XDAtools is not being used in the context of elimination of the SD/MMC method. John

USB connection fails using .exe (Code 43)

Hi all,
I have been trying to get my Qtek 1010 upgraded to the WM 2003SE ROM.
I did the downgrade to 2002 as per the instructions on Lumpi-Stefan's site by SD flash.
When i run the 2003se .exe i get an error as the Qtek is supposed to go into flash mode (the screen where you get the progress bar as the new ROM loads). I can see the progress bar for a split second and then the device just reboots.
In Windows Device Manager there is an error (Code 43) on the HTC USB Device - i've researched the error code and all the descriptions of what cause it are really vague.
I also updated all my laptop drivers, incase it was a driver error, still the same problem, tried it on 2 other machines, and the problem persists.
For this reason i think its an issue with the Qtek 1010 itsself. I tried a 2002 ROM exe and i get the same error, but any SD flash works just fine!
My Bootloader version is 5.22, and the ROM currently on the 1010 is the one recommended by Lumpi-Stefan 3.17 i think.
Does anyone have a suggestion as to how i can fix / get around this?
Any help would be appreciated
Thanks
W

Upgrade Powermap ROM with Vista 64 (=without activesync) but windows mobility center

Hi Folks,
I tried to upgrade my P3300 to the nice Crossbow looking Dopod P800W rom.
It's an exe file and gives the following 2 problems:
1> Rapi.dll not found (activesync nescessary)
2> Sleep4.exe is not compatible with Vista 64
I tried to install,but cannot due to that windows mobility should take over the activesync function. I also put the rapi.dll in system folder but not solved.
I extracted the Powermap.exe rom and found the powermap .nba file.
Is there any method to put this rom image on my HTC without activesync ?
I wonder if anyone tried to upgrade rom through Vista and had the same 2 above errors and how it was solved?
Powermap rom looks awesome, and maybe a solution for us P3300 owners to enjoy the Crossbow look already. If HTC puts the crossbow rom on their downloadsection it would be great offcourse. Let's hope.
I hope I don't need to put XP again on a partition to perform this rom upgrade or visit a friend. I think the reason maybe is that this powermap rom was made when vista was not released yet. It still is based on activesync.
Thanks,
Innovator
suggest you do your upgrade on Windows XP machine (ie visit a friend). then you can use your device on Vista. i heard, it is technically possible to do upgrading on Vista, but as experience of many people shows it's not a straightforward thing. try searching these forums for "vista" and you'll see what i'm talking about. it's relevant to all devices, not only 3300/ good luck!
Let me remind you guys that there is problem with restoring from backup file on PDAMobiz ROMs (I use Spb Backup). Make sure you have it sync with Outlook on your desktop !!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=295295
EazyVG said:
Let me remind you guys that there is problem with restoring from backup file on PDAMobiz ROMs (I use Spb Backup). Make sure you have it sync with Outlook on your desktop !!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=295295
Click to expand...
Click to collapse
Sprite works well for me

Problem with XDA IIi

hello for all,
I have one XDA IIi and i have one problem. the PDA is dead, don't turn on. but if I press RESET boton the bootloader work, and on the screen displayed USB ... V1.06. so, when I try upgrade a new ROM the software in my PC don't displayed version are available on PDA and the activesync don't syncronize with PDA.
the software starts upgrade new rom to pda, starts with RADIO, but when that is on 99% and when the start transfer ext rom ocorred one error and don't work.
so, i tryed that process any times and don't work.
please help me.
PS: sorry my english, I am live in portugal
hi,
are you using windows xp or vista? if vista find a friend with a pc running xp as vista wont allow you to update the rom.
also make sure you have the 100% correct 2003se rom NOT wm5 or 6 as they wont work on this pda
hello,
I have windows xp SP2, and I tried in my laptop and don't work.
when Radio stack finish, one error ocorred.
when I try install o2 english rom ocorred one error: Error 113: Extented ROM Update Error
please where I find 2003 SE ROM for XDA IIi?
thanks
Antonio
satoniboy said:
hello,
I have windows xp SP2, and I tried in my laptop and don't work.
when Radio stack finish, one error ocorred.
when I try install o2 english rom ocorred one error: Error 113: Extented ROM Update Error
please where I find 2003 SE ROM for XDA IIi?
thanks
Antonio
Click to expand...
Click to collapse
in these forums, just hunt around for the latest update, but if that dont work, you may have a brocken phone
thanks by reply.
I have someone solution for this.
someone software extra or other solution?

Categories

Resources