Database Users

Can we upgrade/downgrade using serial (LTP1)?

I was running ROM 3.20.06 and Radio 4.21.00.
I read everything on here about upgrading to ROM 4.00.05 and figured that I was ready to upgrade. Many others experienced no problems when upgrading from 3.20.06 to 4.00.05.
The upgrade procedure was complete and I hard reset.
The XDA turned on and a white screen with "Test Only", "Not For Sale", A Microsoft Windows Powered logo and the Platform information appears and that is all that happens. In other words, it is ****ed and won't do anything.
Does anyone know whether ROMs can be installed via, LTP1 seeing as though the USB will not communicate? Will I get the same problem?
A reply would be nice.

Forgot to mention...
I forgot to mention that I will be connecting my USB cradle to a USB-2-LTP1 cord. If that helps anyone reply then sweet.

Get yourself an sd card reader writer and an sd card of 64 meg or more. Use the tools on the forum to program the rom to sd card, then you enter bootloader mode and your phone will burn the rom from there. As for the lpt port, no way that I know of.

Bootloader mode?
:roll:
Is it possible to change the XDA into bootloader mode if the XDA is not functional? (I cannot do anything, just a white screen is what I see)

Give it 15-20 minutes
I know that this sounds stupid, but don't mess with it for about 15-20 minutes. It seems that if the radio stack is screwed, the OS takes forever to boot. I have been doing OS installs for several months, both directly and via an SD card, so I was comfortable with the process. I had NOT ever done a radio stack upgrade as I had the latest (& only one) that AT&T had released. With the "official" rollout of WM2003 by AT&T, I decided that I liked my custom 2003 ROM that I had cooked a couple of months ago, but I did want to try the newer radio stack. Well, all hell broke loose. At first, I had a PPC that would not boot. So, I did a new flash of the OS via SD chip. It seemed that it too was locked (ie the initial splash screen with OS info at bottom and then it seemed to freeze). Then I read in another thread that someone had noticed it took about 15 minutes for the thing to reboot after a failed radio stack upgrade. And so after giving it time, sure enough, my PPC did finally boot.
The bad news is that I have NOT been able to get the radio stack reinstalled. I have followed all the tips and suggestions, but no luck. If you find that yours finally does boot, then goto start, settings,system info and see if there is info about the radio stack. If it is blank, then you have not radio stack and that is why the long boot cycle.

Radio stack
Ok, when I performed the upgrade, I believe it was only the ROM that upgraded. The radio version is the orignial XDA upgrade which was released to the public as a genuine radio (B) upgrade. I'll look into the SD boot load. Will it automatically install from the SD card? Anyone got any idea?

WANTED: AT&T SX56 virgin ROM file

Can somebody please help me.
As I posted in this post, I scr3wed up my buddy's AT&T SX56.
I have got the thing past being dead, by putting a custom ROM on it.
However, I really need to get this thing back into AT&T mode, with either 2002 or 2003 on it. I will then upgrade to 2003.
Does anyone know where I can get a virgin AT&T ROM so that I can re-flash his system.
Thanks.
-=Nick=-

nickpoore said:
Can somebody please help me.
As I posted in this post, I scr3wed up my buddy's AT&T SX56.
I have got the thing past being dead, by putting a custom ROM on it.
However, I really need to get this thing back into AT&T mode, with either 2002 or 2003 on it. I will then upgrade to 2003.
Does anyone know where I can get a virgin AT&T ROM so that I can re-flash his system.
Thanks.
-=Nick=-
Click to expand...
Click to collapse
Check out Yorch.net

Okay, I'm making SOME progress.
Firstly thanks for the youch referral from kwlandry.
I had found the rom kitchens this afternoon while looking for solutions...
I'm busy flashing the ROM from SD for the umpteenth time.
It seems that whenever I flash the SX56 with an AT&T 30.09 ROM, then I get a hang on reboot.
I am currently trying the 4.00.05 ENG ppc2003 from yourch as it seemed to be non-specific (and a non-TMobile) one.
I seem to have the latest Radio stack (RA.33.02), and have been able to get a couple of ROM's to work.
Does anyone have ANY idea why the AT&T 30.09 ROM would fail in the same place every time? This is definately an AT&T unit, at is has the logo on the front. The phone was originally locked, but has been unlocked during the process.
I'm busy reading/searching the forum, but haven't seem to find this problem anywhere.
Thanks for ANY help.
-=Nick=-

I fixed many XDAs with your problem!
you could send the XDA to Siemens to repair/exchange.

Try flashing back to the original ROM via sd method then upgrading to wm2003.
You can get a copy of the 2002PPC ROM at siemens website. Cut & Paste the following link.
http://www.my-siemens.com/MySiemens...%2FMC%2FMC%2FSX56POCKETPCPHONE%2Fdesc,00.html
Extract the file to a directory, then use the XDA OSimage tool to write to SD card then use bootloader to write to ROM.
After a successful flash follow the same to upgrade to wm2003
You can also try this kitchen http://lumpistefan.dyndns.org/

BTW - the phone has to be fully charged. That might be the cause of your hanging issue.

I have posted this in answer to your other post, try using a diferent memory card for upgrade to wm2003, I had this problem when using an mmc memory card to upgrade to WM2003, it hung every time even though it seemed to complete correctly, I changed to a different memory card and had instant success.

Yes! I agree also. But, though "mmc" and "sd" cards are similar, in this case the process calls for an sd card. The size doesn't seem to matter, I use a 512mb, however some people have had issues with device detection. So, a 64mb card is recommended. Make sure it is formated before use. And again a fully charged phone is unlikely to have problems so save your battery till all requirements are in place. Also DO NOT DO A HARD RESET! untill you have a successful install. You could lose you GSM ROM.

Thanks for all the replies.
I have successfully flashed back to the original rom; I downloaded it from yorc.
Having got the device back up and running, I tried the upgrade to 2003 again; using the Siemens software in the cradle solution. Didn't work.
The battery was definately fully charged (90% or higher) at all times.
I will look to try another SD card, and see if that makes a difference, it just seems strange that the card works to restore WM2002, and either card or USB approaches to upgrading to WM2003 fail.
The card I've been using is a very generic 128MB MMC card.
Again, thanks to everyone for their suggestions.

Imate jasjam

Hi,
i am new to the forum, Please forgive my whining. I have being tryin to flash my imate Jasjam foe the past 3 days without success. i have gone through this forum front to back and tried almost everything. i have even downloaded almost everything you have but still my phone shows "NO GSM" wen booting. It dosent even flash. the closest i have to to is 13%. everything works perfectly except the GSM part. please i need help. im kinda a noob to the flashing thing so i would appreciate details on how to get this done. Thanks

Did you Hard SPL your phone first?

yes i did. i even used different versions of hard spl

Make sure you have Hard SPL ver7(phone should display in bootloaderIPL 1.04, SPL 2.10 Olipro) then try the sd card method of flashing an os. use a stock rom though to see if your radio can be fixed (this is the problem part). You need to format an sd card fat32 then copy the .nbh file onto it (not into a folder). rename it "hermimg.nbh" then put fone into bootloader(tri-colour) screen by pushing and holding ok button above flywheel, power button and using stylus to reset. HOLD ALL BUTTONS UNTIL IN BOOTLOADER... Follow instructions from there.
If you cant reflash your radio rom, you can still put a cooked rom on and use for a PDA but you won't be able to use as a phone again, sorry...
Hope this helps....& good luck...

thanks. i havent tried it with an sd card b4. i do that now. what version of rom do u recommend????

whats that feeling you get when you've felt like your going down that road again?
ps i got sick of trying to find the MMS settings menu in most of those other roms and just reloaded the default telstra one again! >.<
i was kinda hooked on CRC's roms, due to his locality of cooking but i dont mind some of the crystal ones Tyr0's

hi, i have tried the sdcard method. first i hard spled using v7 then i copied the nbh files as u instructed. i have tried it using different .nbh files and i have the same result. it gets stuck on the part where it is supposed to update the radio.what should i do pls

the "No GSM" is when the Radio Rom is blank, and is next to impossible to re-write. there is a section in the forums for this problem.
as far as things go, its probably now just a PDA, but keep searching the forums for people who have rescued their radio rom, you may get lucky

please can u point me to the thread??? i have gone through almost all the threads for a solution and so far i have come up blank.

try looking round here
http://forum.xda-developers.com/forumdisplay.php?f=306
might find some useful info here
http://forum.xda-developers.com/showthread.php?t=369434
also try the wiki
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
good luck

Depends on how you went about it.
If i were in your position i would try the following
Try a couple of Manufacturer roms WITH radios in it
ie
Try the HTC then try the Telstra 6.0 one.
Secondly check the sim slot.
Carefully bend the guides down and the 6 pins up so when you put in your sim it is very firm.
I had the No GSM problem this week and it turned out to be this (after numerous grief/fixes and workaround).
post back the results

i have pretty much given up on my imate. i have tried every method recommended by everybody but still, i've got nowhere. As a PDA, the device works very well but that is basically useless to me without the phone functions. Please if there is any new input, i would appreciate it. The device boots with NO GSM.

i have actually already tried a couple of "Manufacturer ROMs", dunno if they were good. could u point m eto where i can get any of those??? Thanks

Please help - bricked XDA Orbit II

Hi, first post on the forum so please be gentle with me....
I have an XDA Orbit 2 which was until last Thursday working fine with the last official upgrade from O2 (Win 6.1, no idea about all the other stuff).
Whilst using the phone last week it suddenly died in the middle of a conversation. It wouldn't power on at all. I took out the battery, waited a couple of minutes, put the battery back in and switched it on. All that happened was the phone displayed the 4 colour screen with "POLA200 SPL-3.13.0000 CPLD-2" in the red section and "Serial" in the white. I repeated the battery removal exercise a few times, waiting for increasing lengths of time but nothing changed.
I had a fairly long search through the forum and have tried for a few hours now going through the various fixes suggested but I am getting nowhere.
It won't hard reset, all that happens is the message "No Image Found" appears for a very short time and I then get stuck on the 4 coloured screen with the message above.
The same thing happens if I try just putting the thing in bootloader mode.
I can't use any of the official O2 rom upgrades as the phone because all the PCs I've tried connecting to it won't recognise it over a USB link.
I've tried connecting to it using mtty, again on several PCs, but I just get a message "USB port can not open". Just in case I've uninstalled Activesync on one PC and got the same answer.
The "how to flash you polaris using the microSD card" originally looked useful but I have some problems with it.
The first is that I need HardSPL installing on the device, which I can't do because I can't get to it.
The second will be down to me not knowing where to look, but I can't find a ROM to download and copy to the microSD card as POLAIMG.nbh. I did manage to find a Win6.5 one (the HTC Polaris - PDaviet rom wm6.5 manilla 2d (core 23004) by tranminhman one) which I thought I'd try. I guess the idea was that if I could just get something working I could always reflash it again with a different ROM or maybe apply the o2 upgrade. Unfortunately the image was password protected and I couldn't find the password in the thread.
I'm kind of at a loss now so any help would be appreciated.
Cheers

Hey,
Sorry i can't help much you'll need to do a lot of reading and troubleshooting...usually it's the onyl way to solve it by trying all options.
I'm just posting this message to bump it up in this forum, but more importantly you should be posting in the Iolite section for help with that specific device especially if you're trying other ROMs.
Also if it died on you and you haven't begun to flash it, can't you send it to the service for them to fix it for you? That way you can rule out any hardware malfunction.
Best of luck!
Alan

Did you do soft reset

alanazar said:
Hey,
Sorry i can't help much you'll need to do a lot of reading and troubleshooting...usually it's the onyl way to solve it by trying all options.
I'm just posting this message to bump it up in this forum, but more importantly you should be posting in the Iolite section for help with that specific device especially if you're trying other ROMs.
Also if it died on you and you haven't begun to flash it, can't you send it to the service for them to fix it for you? That way you can rule out any hardware malfunction.
Best of luck!
Alan
Click to expand...
Click to collapse
Bit in bold er... cant quite understand why in iolite section as the xda orbit 2 is the rebrand htc touch cruise => htc touch find. Its in the right place.
On the side of what to do i the ony thing i can think of would be mtty and if that didnt work then try to reflash the official o2 6.1 release and see what happens when you try to do it.
You cant try to install any 3rd party roms they jsut wont flash as you dont have hard spl installed and cant do that until you have it running again.
Try the above and see what happens...

Hi Nik
I have tried just about every kind of reset, nothing has worked.

Hi Alan
If I can't get it sorted any other way I'll probably send it off somewhere but I'd like to have a go at fixing it myself. It will at least be a bit of fun!
I take then that I've posted this in the wrong forum. Oops, apologies.
Jon

You have not posted in the wrong forum look at my signature!

Hi jon,
Conclusion from post 1,
1) Uncompleted flash with new ROM or hardware problem (half way die)
2) Unsuccessful flash Hard SPL (cannot see Olinex 2.2 wording during bootloader)
3) Your PC & PDA fail to connect via USB (serial wording appear during bootloader)
Try this method,
1) Get shipped ROM from HTC web site, key in your country & serial behind battery
1a) Extract shipped ROM by WinRAR , take RUU Signed.nbh
2) Rename to POLAIMG.nbh put inside SD card, "flash using SD card"
3) Make sure your battery power more than 50% cause it take about 2 hours
Good luck, my friend
[Your request Password: TranMinhMan]

Nik Ahmad said:
Hi jon,
Conclusion from post 1,
1) Uncompleted flash with new ROM or hardware problem (half way die)
2) Unsuccessful flash Hard SPL (cannot see Olinex 2.2 wording during bootloader)
3) Your PC & PDA fail to connect via USB (serial wording appear during bootloader)
Try this method,
1) Get shipped ROM from HTC web site, key in your country & serial behind battery
2) Rename to POLAIMG.nbh put inside SD card, "flash using SD card"
3) Make sure your battery power more than 50% cause it take about 2 hours
Good luck, my friend
[Your request Password: TranMinhMan]
Click to expand...
Click to collapse
Thanks Nik
I've had a bit of a look round the HTC site and couldn't see a ROM to download so I've asked their technical support people if there's anywhere to download it.
Fingers crossed they'll help.
Jon

jonfsharp said:
Thanks Nik
I've had a bit of a look round the HTC site and couldn't see a ROM to download so I've asked their technical support people if there's anywhere to download it.
Fingers crossed they'll help.
Jon
Click to expand...
Click to collapse
Try to get official HTC ROM here, Select WWE (405) CID_001 for your country.
Good luck my friend

have u tried this?...
turn off, pull out the battery, then put it back, charge ur phone till the battery indicators shows green (which mean it's already fully charged) then... power on ur device.
it looks like a dumb suggestion , but... i have had a same situation
(HTC KAISER, not Polaris).
if it doesn't work, then try to upgrade with a POLAIMG.nbh (take it from official HTC ROM)
in a 2G FAT32 microSD root directory.

Nik Ahmad said:
Try to get official HTC ROM here, Select WWE (405) CID_001 for your country.
Good luck my friend
Click to expand...
Click to collapse
Thanks Nik
Much appreciated.
Downloaded the ROM as suggested, unzipped to the SD card, renamed the image to POLAIMG.nbh, stuck it in the phone and things got slightly more interesting.
In bootloader mode I now get a bit further. I get a grey screen which says "Loading ..." then "Checking...." then "00028002 Not allow". It then goes back to the four coloured screen as before.
However, does the fact that it is trying to read something mean that I have just got the wrong file?
I'll try a few more and see what happens.
Thanks once again, your help is greatly appreciated.
Jon

Hi oza
Yep tried all the battery pulling out stuff but got nowhere.
The ROM thing on the SD card gets further. I extracted the ROM from the official O2 upgrade, stuck it on the card and renamed it POLAIMG.nbh.
If I put the phone in Bootloader mode I now get even further than before. I get a grey screen with:-
POLAIMG.nbh -
RADIO_V2 -
BOOTLOADER -
SPLASH1 -
OS -
Press power button to start update image
Press action button to cancel update image
If I press the power button
I get an "Update In Progress" message and a progress bar.
After about 4 minutes I get a full progress bar and :-
POLAIMG.nbh - OK
RADIO_V2 - OK
BOOTLOADER - OK
SPLASH1 - OK
OS - OK
Update complete
UPDATE SUCCESS
And that's as far as I've got so far.
If I take the SD card out and try a hard reset I just get stuck on the 4 coloured screen I got before, but with no No Image Found message.
I get the same thing with bootloader mode and when I just remove the battery.
If I put the SD card back in I can go through the update process but I can't do anything
else.
So, have I actually made any progress? I'm not actually sure what I have updated and what state the phone is in at the moment. Is the fact that this didn't work an indication of a hardware failure and I should send it off somewhere.
Any advice on next steps would be good.
Jon

what is ur bootloader screen says now?
IPL...
SPL...

Before you can be helped you need to supply this information:
What rom were you using when it died?
What SPL are you using?
You used MITTY and fixes so I assume you're not a complete nunce and have hard spl on your phone, so on that assumption and ONLY if you have hard spl on your phone, try this:
If it isnt a hardware problem, then Its possible you have a dodgy radio flash issue - normally that would have been caused by a bad flash, but you indicated that this happened in use.
Provided it isnt a hardware, to fix this you need to either flash the radio (less reliable, but try it) rename the radio file to POLAIMG.nbh as directed before and stick on SD card.
The other thing to try is to flash a rom with a radio INCLUDED in it. Try and avoid fancy 6.5 beta roms and stick to 6.0 and 6.1 basic roms.
I believe Chavonbravo's VLIT roms come with the radio so try that. Its listed in the forum. I'm not providing links as I dont know what radio you were using and you really need to go for like to like or close. My preference is 1.59.44.02 radio rom if you find one.
Let us know how you do.
Lastly what radio and rom did you have?

Try this one M-AMINES if the radio you had was a 1.59.xx radio as it has the radio included.
if it was a 1.65.xx radio then try the VLIT naked rom.

oza_crazy said:
what is ur bootloader screen says now?
IPL...
SPL...
Click to expand...
Click to collapse
Hi Oza
Exactly the same as it did when it first broke. I get the 4 coloured screen with "POLA200 SPL-3.13.0000 CPLD-2" in the red section and "Serial" in the white.
No idea what the IPL is or was I'm afraid.
Jon

bally3 said:
Before you can be helped you need to supply this information:
What rom were you using when it died?
What SPL are you using?
You used MITTY and fixes so I assume you're not a complete nunce and have hard spl on your phone, so on that assumption and ONLY if you have hard spl on your phone, try this:
If it isnt a hardware problem, then Its possible you have a dodgy radio flash issue - normally that would have been caused by a bad flash, but you indicated that this happened in use.
Provided it isnt a hardware, to fix this you need to either flash the radio (less reliable, but try it) rename the radio file to POLAIMG.nbh as directed before and stick on SD card.
The other thing to try is to flash a rom with a radio INCLUDED in it. Try and avoid fancy 6.5 beta roms and stick to 6.0 and 6.1 basic roms.
I believe Chavonbravo's VLIT roms come with the radio so try that. Its listed in the forum. I'm not providing links as I dont know what radio you were using and you really need to go for like to like or close. My preference is 1.59.44.02 radio rom if you find one.
Let us know how you do.
Lastly what radio and rom did you have?
Click to expand...
Click to collapse
I've not been a big modifier in the past so it was just using the bog standard O2 software from the O2 website. The name of the file is "RUU_Polaris_O2_UK_3.13.206.0_radio_sign_25.85.30.07_1.59.42.15_Ship.exe" so I presume that there can be information gleaned about things like the SPL, ROM and radio versions?
Not a complete nunce, no, but so very far away from being comfortable with all this. This post was a result of a good few hours trawling through the forums looking for help. Anything I have done has been the result of a post on this site and I am very grateful that there are people willing to share their knowledge.
Anyway, as for hard spl, nope it isn't installed. I'd never needed anything like it before the phone died and now that it has died I can't get onto it to install anything.
Yes, this happened right in the middle of a conversation after a good year or so of normal day to day use. As I said, I haven't needed to make any changes to the phone so the only thing I've ever done is upgraded it with software from the O2 site.
I'm beginning to suspect that without Hard spl my options are very limited and pointing towards either sending it off for costly repairs or just binning the thing. I am probably wrong but I'm guessing that the fact that I don't have it installed is the reason why nothing is happening with the "Update in progress" stuff that is happening now.
Radio & ROM, as above. Whatever the O2 update provided. From the filename radio would be 1.59.42.15.
Many thanks
Jon

jonfsharp said:
I'm beginning to suspect that without Hard spl my options are very limited and pointing towards either sending it off for costly repairs or just binning the thing. I am probably wrong but I'm guessing that the fact that I don't have it installed is the reason why nothing is happening with the "Update in progress" stuff that is happening now.
Radio & ROM, as above. Whatever the O2 update provided. From the filename radio would be 1.59.42.15.
Many thanks
Jon
Click to expand...
Click to collapse
Well whatever you do dont bin it, we can always use it on the Android project if you decide to go that way.
Ok.. so lets see.. the phone is not picked up at all in windows?
If that is the case, if even a serial connection cant be made then theres issues. At this point, I would disregard all the other advice as it only applies to a hard spl device unfortunately. SD card flashing and all other radio rom flashing will only work with hard spl as far as I know - definitely safer for certain and you dont want to wreck a repairable device.
I take it, its not under warranty, for your mention of costly repair.
The important thing at this stage is a serial or usb connection from a Windows PC. I think I have heard of forcing this connection by opening the device but this would really be in the realms of profficient repairer or enthusiast.
I'll have a look but also do some searching yourself for making a connection to a Windows PC and forcing an SPL onto a phone.
I dont know whether anyone's ever managed to HardSPL a phone using a memory card? Just a thought...

Who would have known.. have a read of this and see if you can follow it up regarding the spl through sd card ..
http://forum.xda-developers.com/showpost.php?p=3273438&postcount=7

T-Mobile HD2 with serious problems

Firstly sorry for the long post.
I'm having a few problems with my HD2, and I'm looking solutions that dont involve flashing the t-mobile ROM (which is 1.43.110.2). I have all the HTC patches installed.
The problems I'm having are ...
*Favourites are disappearing sporadically. I cant figure out whether they're going when I sync it up or just purely at random. They stay on the internet tab but disappear from the favourites menu. Folders are not affected.
*Music player: Lags. I have to wait about 2-3 minutes before a song starts playing on the first attempt, then its fine. This happens even if the little spinning circle hasn't appeared (this appears after you have updated the storage card by syncing with media player). Also when sliding album art back and forth in landscape mode, it freezes, and then jumps back to the beginning of the stack. Didn't used to do this.
*Music Sync - my biggest nightmare right now; I really need help on this one! Sync in windows 7 windows mobile device manager works fine. When I load up WM player and attempt to sync the storage card however, the device will sync for a couple of minutes, and then soft reset itself.
Hopefully when 6.5.3 comes out officially HTC will roll up all the crappy patches and T-mobile will approve it... but until then I'm stuck with these annoyances (in addition of course to crappy SMS, constant crashing, lags etc., which I certainly wasn't expecting when I got my shiny new HD2

I was in a similar boat to you. The Tmo ROM is really poor and I hate to tell you this but 1.48 or 1.61 are the answer.
If you really can't consider that option, I'd say that you should do a hard reset and see what issues you still have with a fresh ROM. The original T mo ROM is on here somewhere. download that as a backup before you do anything, just for safety.

realy sorry mate but he is right try and see if you can get hole of a free goldcard i run 1.48 insted of t-mob its not purfect but worls alot better

Thanks for your responses. I guess flashing is the only option, cos right now this phone really is virtually unusable. I'll have to try and get my head around the whole goldcards thing but if I get stuck I'll start a new thread...
Thx!

severeano said:
Thanks for your responses. I guess flashing is the only option, cos right now this phone really is virtually unusable. I'll have to try and get my head around the whole goldcards thing but if I get stuck I'll start a new thread...
Thx!
Click to expand...
Click to collapse
Hi mate, had the same issue. The gold card thing isn't too bad, theres a great idiots guide on here that I used, the hardest bit is getting the number off the MicroSD card, dont do what I did and lose all my data on it (as you edit some values which makes Windows no longer recognise it sometimes). Take a copy of whats on there just incase. Again there is a post that mentions a way of reversing the change so you have lost all your data on the memory card.
Good luck, I did without any probs to flash from 1.43 to 1.48 using the Goldcard method

I have the same problem with favourites and i'm on the 2.02 ROM. I never touch IE on my computer though so i've not put much thought into what happens with the sync. I'm just throwing together a wee app to sync it with Firefox though so that will solve my issues.
As for synching it with media player (and i'm old school - I drag and drop files), could there be any corrupt/unrecognisable data in your playlist? You could try a drag/drop dump of music onto your device and see if that works.

severeano said:
Thanks for your responses. I guess flashing is the only option, cos right now this phone really is virtually unusable. I'll have to try and get my head around the whole goldcards thing but if I get stuck I'll start a new thread...
Thx!
Click to expand...
Click to collapse
There is now HSPL and SSPL available so goldcard is no longer required, using SSPL or HSPL is much easier too

Hi, I converted my T-Mobile HD2 to 1.48 using SSPL. After a couple of teething troubles with Firewalls and a hanging Activsync - fixed with a PC restart it worked just great. It scared me twice when it hung in the boot loader but taking the battery out and restarting fixed it. I made a goldcard aswell just in case but do not really know if it would have worked.
Now its loaded The HD2 seems faster, has more programs and the battery seems to last longer particularly with WLAN.
I still have 1 open question though that I have, touch wood, not had to find the answer for yet. If I do a hard reset which ROM reboots, T-Mobile or the 1.48? Perhaps somebody here knows? I would be grateful to find out before I have to try it out.
Good luck and hopefully it works as well for you.
Bedwar22

i believe if you hard reboot it will revert to the Tmobile rom.. as you used SSPL... only if you do a HSPL will it stay... correct me if i'm wrong guys

nutmegy said:
i believe if you hard reboot it will revert to the Tmobile rom.. as you used SSPL... only if you do a HSPL will it stay... correct me if i'm wrong guys
Click to expand...
Click to collapse
Incorrect...your Rom does not change regardless of flashing method SSPL or HDSPL. If using the SSPL method a hard reset will remove the SSPL only, and your SPL ONLY will revert back to original, Your latest Rom does not change....

Thanks for the quick responses guys but I am still a bit confused - sorry.
Perhaps in laymans terms -
If I have to hard reset, when the phone reboots will I get all of the T-mobile c**p again and have to go through the SSPL process again- which is not easy when on a business trip, or will I keep the HTC version.
If as I think I understood from band27 I get the HTC version back but lose the SSPL what effect will that have?
thanks again

No, When you hard reset you will get exactly the same ROM as you have before you hard reset. IT will be just like the first time the phone booted after you initially re-flashed it.
The only way to return it to T-Mobile's ROM is to find the download that 'football' posted a few weeks ago and flash it.

Plz let a noob continue this question
If i use SSPL to flash a cooked ROM and for some reason want to go back to a original ROM, how?
Is it correct that i only take my original ROM and flash it as usual, or do i need to do annything els?
Do i need a goldcard?
Plz help a noob