Database Users

CRASHED!

hey people....
i was just upgradeing the radio stack to v.4.21 beacuse mine was v.4.20 and as i was installing it on the xda, it said "Upgrade failes" and crashed. I then tried a soft and hard reset and it just crashes again.
Can some one PLEASE help me...
Thank you so much
jay

Apart from a sof and hard reset, what else have you tried to resolve the problem?

nothing
i dont know how.....i have had the XDA for 1 day
any advice i would be VERY greatfull....
even if u think it may not work.
thank you so much
jay

well looks like you may well have a dead one day old xda on your hands there jay

no dont say that....
its not dead.....its just sleeping (hopefully)
please help any body...*does a jig to get people to help* lol
jay

THE PROPHETOR! said:
"it said "Upgrade fails" and crashed. I then tried a soft and hard reset and it just crashes again."
Can some one PLEASE help me...
Click to expand...
Click to collapse
Crashed!!!!
What is being displayed on the screen?
Are you able to use your XDA at all?
Will it still connect to your PC via ActiveSync?

the answer to all those questions is no....
no activesync
no using the xda
the only thing that is being displayed is the startup o2 sign and in the left hand bottom corner it says
g
r
s 31.85834 (or some number)
and then it goes to a blank white page.....
it keeps swapping back and forth from these two pages
thanks
jay

Are you able to get into the bootloader?
press and hold to on/off button while soft-resetting.
Do you have a SD card reader?
Also, where did you get the xda from, just incase!?!

im gonna try the bootloader thing....but what do i do if it works (im waiting for it to charge up abit before i do that) although i dont think it is charging
i dont have a sd card yet....
o2 online....i have insurance, i think (hope) they will change it....but im going away tommorow for 4 weeks....and im stuck without a phone...so i wanted to know if there was a way that i could reinstall it again...
thanks again york for your help
jay

hey yeah i can get to bootloader
wallaby bootloader v5.22
what do i do?
it siad there is a gsm erorr?
thanks
jay

Right, well it's a start, unfortunatly without an SD card reader there is nothing that I know that will fix this problem, as you cannot use Activesync without the os loading.
I've had a quick look around the forums but all related articles on fixes suggest the need for a card reader.
When you did the upgrade, did you remember to remove the power supply first?.
It seems that leaving the power supply attached while upgrading the radio causes an internal configuration error.
If no one else here can help with your problem, you will have to send it back to O2, they will replace it for new, however, if they do kick up a fuss, remind them of the Sale of Goods Act (Amendment) 2003.
Sorry, that's about as much as I can do mate. Good luck, and don't be but off the xda by this problem, I got mine of ebay and broke the screen within a week, had to fork out another £130 for a new screen, but I'm very glad I did.

ok thanks york......
i will give o2 a call.....
thanks
jay

THE PROPHETOR! said:
hey yeah i can get to bootloader
wallaby bootloader v5.22
what do i do?
it siad there is a gsm erorr?
thanks
jay
Click to expand...
Click to collapse
Great now press the Calender button, that should put you in the GSM
bootloader mode. From there run some of the options ect.., try changing your band to 900 and see if that helps also try turning the radio off as that might let your XDA bootup.

hi....i tried that and it kep saying....
gsm turn ON fail!!
any more ideas?
thanks

SPV M600 Keeps soft resetting and other issues...

Guys I recently purchased a brand new SPV M600 from ebay and when I say its new, trust me because it was completely sealed and no marks/scratches on the M600 plus all the wires/leads were sealed etc, and he even sent me the invoice from Orange stating the date of purchase, accidentally I think as it contained his home address and telephone number!
Now when I first turned it on and charged the battery etc, I had a little play with it and it all seemed fine. I took it to work with me that day and at work it started to act strange.
First it started by soft resetting itself while I was in the SETTINGS window just tweaking all the bits and bobs to my liking. Anyway it started up again and this time it seemed ok. I tried opening all the menus etc as I had done before but it didnt soft reset again which was a little relief!
It worked fine for the next 10-15 mins after which I put it away and started doing some work which is what I should've been doing in the first place!
I got home in the evening and sat in from of my PC and turned on the PPC and this time it started at the Splash Screen instead of coming out of stand by! Weird as I didnt reset the device and its on Button Lock so it couldn't have happened by accident whilst being in my pocket!
The only problem was though, this time it stayed in the splash screen and wouldnt go past that! I soft reset it again but still no luck!
So I then went for the kill and did a hard reset, not that I lost anything as I didnt have any information on there. After the hard reset, it goes past the splash screen on to the blue nice looking Windows 2005 screen but it stays stuck there!
Did a hard reset again and this time it worked but it crashed when it was installing the customisation tools! It needed a soft reset again! After that it seemed to work ok... only for a little while before it started all over again!
Now this was the original Orange Rom and I have no idea which one it was and I didnt care because it had to go!
I came here and found that our friend Jester was upto his old tricks again and had released a modified version of the Qtek Rom, so I went for it and installed it without any problems (except for his very original spash screen which scared the hell out of my little sister and I didnt find it very comforting either but soon had it changed with Jester's HTC Splash screen).
But unfortunately the problem still remains and the same thing keeps happening. It soft resets itself once in a while and when I do a hard reset it gets stuck in either the Splash Screen or at the next screen which is the Windows 2005 blue screen.
Its like trial and error really, when you guys want to hard reset your prophet all you have to do is do it once, but I have to keep trying at least 2-3 times.
In some cases I need to do a hard reset and then a soft reset soon after when it gets stuck in the Windows 2005 blue screen! And even then its not over because when it gets to the installation of the customisation software, theres a good chance it'll crash there and will need a soft reset!
I tried to install the original Qtek Rom, the one which Jester modified a little but it wouldnt work and I'm guessing I only have the CID lock to thank for that! Mines a G4
Any idea guys? I'm totally screwed here as I cant send it back to the guy I bought it from because I have changed the Rom and thats not good because he cant send it back to Orange to get a replacement! I wish I hadnt changed the Rom and just sent it back to him but I thought it was a software issue.
I'm not convinced its a software issue anymore though!
If you made it this far then I apologise for making this post too long (was longer but I had to to edit out like 1/4), and bloody hell is that the time!
Anything from anyone would be much appreciated.
All the best.

My friend you should try to format your phone and install new operating System...Similar problem happened to me (mine just freezed and I had to reset it) so the new OS is the solution of your problem...So when you do that,tell us if everything is ok..And one more thing---This little mobile device is THE BEST you'll ever get for that amount of money-so keep it and take care my friend...
Greetings!

Alix, thanks for your post. I'm not too sure about that because like I said, it came with the original Orange Rom and even then it was like this, and after upgrading to the latest Qtek Rom, the problem still continues. So somehow I dont think its the software. I mean I hope it is the software as thats an easy fix if I can somehow get my CID unlocked and right now thats not possible on G4 Roms, unless I'm wrong and falling behind?
I have a feeling its the hardware and if it is then I'm screwed!
Thanks for your reply and hope to hear from others soon.

Have you tried to replace the battery? some times the battery causes this kind of behavior when its not supplying enough power to the phone.
try to HR with the phone connected to a wall charger (not to pc) and see how it goes.
if it reboots OK, so probably its a battery issue.

Shayd that was good thinking and I tried it right away but unfortunately it wasnt the case. It still needed 3 tries... one hard reset followed by two soft resets before it went past the Splash Screen.
I've just about had enough with this thing!
Thanks nonetheless.

How To Reset SPV M600
hi every one,
can some body tell me how to hard reset SPV M600
It's On ORANGE
IPL 2.10
SPL 2.10

infozohaib said:
hi every one,
can some body tell me how to hard reset SPV M600
It's On ORANGE
IPL 2.10
SPL 2.10
Click to expand...
Click to collapse
RTFWiki!! It's there!

hi , I have spv m600 from orange and I did something to change the original room , and now it work perfect here do that way
first thing unlock sim using this link to download unlock tool.
http://forum.xda-developers.com/showthread.php?t=300062
After that you can download room from this page to updagate your phone
http://forum.xda-developers.com/showthread.php?t=297489&page=3
Download: LvsW WM5 NVID(no vendor) [RUU-Prophet-220734-2207114-024721-NVID]
That room work for mime . you should try it
I hope .It ll help you
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet

Hard reset SPV M600.
How reset SPV M600?push buttom cam and buttom comm manager(both two buttoms left ) and the reset with the stylus.keep the two buttoms pushed till you get a message then strike any key to quit.
Caution:
you turn off your pda before doing any hard reset.your pda will install default parameters.
Save your data before any hard reset.
good luck.

phew! i just went to sell my SPV M600...as its being doing my head in an is long overdue for an upgrade. however, it decided to die in the shop! i was offered 50quid too, so i wont be goin back there, but i needed the money to get me through to pay day, (its something ive been puttin off doin fior awhile, but when moneys tight....) id just like to say a huge thank you for lettin me be able to reset my own phone, the Orange shop wanted £100 for a replacement (screw that!) an the car phone warehouse wanted to take the phone, send it to sweden, mess about with paperwork, an probably wouldnt have give me back till next year.
so, Thank you
P-Swish
PS...does anyone have any experience/news on the new Nokia N95? im lookin at upgrading to one, an well, if anyone has any bad experiences/insider info pls email us

I bricked my 8125!??! wtf

hi guys
well i have a quite serious problem with my 8125
cpl of days ago my 8125 screen started disaligning and I couldnt stand it anymore... it would disaling after 10sec and I was mad about it
so i made a backup of main memory and decided to to a hard reset..
after hard reset, I got the WM screen and needed to tap the screen, I did the first two corners but after those i couldnt tap anymore, the touchscreen wouldnt feel anything.. so i softreseted it and got back to the WM screen and that alignement but this time it wouldnt feel anything- i stuck on the first screen..
okay, I thought maybe its a ROM fault (I use molski rom 2.26.10.2 with aku 2.3) and I tried to load it in bootload.. believe what, I found out that fuxing M$ made xda ROM archive down.. i went mad...
so i couldnt update my rom
than yesterday after reading sites and sites over net, I decided to open my wizard and try cleaning it, I did that, put cover back and all that stuff... and now my pc doesnt recognize the wiz when I connect it in bootload mode on AS
okay, so I don't know what to do, im out of ideas and I beg sum1 for help...
I got my 8125 from eBay last August and till cpl of days ago it was working perfectly.. Im not from USA btw.. ill try to send it to a diagnostic service in HTC in my country... but is there any other possibility?? would changing the touchscreen solve my problem?
plz help me...

The bootloader does not work with active sync, i think.
Active Sync requires to dialog with Windows Mobile, and the bootloader just has the basic code to make a simple USB conection.
You can probably use the Wizard Love ROM, which works great with any Wizard (even G4), and upgrade from there to any other version.
Notice that Wizard Love does not use ActiveSync at all, it downloads the rom through USB without active sync.
Please excuse my english, im spanish

can u plz PM with the link for the Love ROM download? thx

Xda Red & Green Screen Freeze After O2 Update Please Help

Hello everyone
RE: XDA EXEC/QTEK 9000
I have recently updated my sofware on the O2 website and after following the instructions to the letter the screen will just show a mess of green and red dots all over the screen in vertical sections?
I have tried a hard reset soft rest and all the other posible resets i can do but still this screen wont go away?????
Please help if you could suggest anything
Thank you
Shepshed2000

ME TOO!!!
I have had exactly the same happen to me, it appears that O2 are total amateurs when it comes to supplying ROM upgrades. not only that but you will find that the support no. on the site actually takes you nowhere. I sent mine back to the supplier and after trying to reflash the ROM they were unsuccessful and so i am now waiting on a new XDA. Dont bother with O2 as they were no help at all to me, firstly i couldnt get through at all and after 2 weeks of emailing them every day i got a response telliung me how to put the unit into boot loader mode (no help at all!!!!!)
Good luck to you in getting this issue resolved, i only hope that you have it insured like myself.
Once again O2 you are indeed crap!! thanks for the service that i didnt recieve, altho i pay way over the odds for this otherwise worthy handset.

£££££ what does it cost to repair? £££££
my phone is using a vodafone sim card and i bought the phone off ebay so reciepts etc are nowhere
will o2 still help me fix this ?
do you know how much it will cost ??
or am i best to throw it in the bin
plz reply soon
thank you people

need of some serious help

hey bro !!
i got this imate jasjar 2 years back and i love my uni allot.
need a help from you bro...i am new to all these hav been goin through 100z of threads everyday bt not gettin my answers i hope you would help me out..!!
actually my jasjar suddenly started behavin weird it switched off by itself n wen i switched it back on after the windows mobile screen shows up my jasjar gets a dead blue screen n nothin happens.
tried to connect with active sync 4.0 and 4.1 bt it would not respond and show dat the phone is not connected.
i came across a thread in which a guy said to press bright light button + power button+softreset it sent my phone to a usb mode
then i used mtty tool and its command task 28 to check if my jasjar is wasted or still breathin lucky enough it dint give a formatfaliure msg and there were some steps i followed .
everything went as told n now m stuck on where to get official wm5 for jasjar and how to get out of the usb screen and how to flash the rom...??
please help

To exit boot loader mode: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
With regard to restorig WM5 - I have the official O2 XDA Exec files for their last software release. But I think you said your's is an iMate.You could see if the iMate version listed here: http://wiki.xda-developers.com/index.php?pagename=Universal_Upgrades is still available - if not maybe someone has a copy somewhere.
Hope this helps.

hey dat was gr8 bro....bt m still stuck with finding of wm5 for my imate ...!!
i found i mate upgrade bt when i clicked on download an error popped up "550 or 505 change of directory sumthin..."
well i followed the instructions u sent me it worked well bt still need to flash with wm5 ...!!
any chance of u or ur known havin a copy of wm5 rom
its been weeks and everything is gettin hazy ur help would be appriciated allot
thank you so much ..<!!

bro thankx for help i actually flashed my uni with kdskamal cooked wm5 bt my jasjar still gets dead on a greenish screen as it used to get before in blue screen wht m i supposed to do...??

Hi,
Try flashing with a WM6 rom (Tomal's ROMs are always good) and see if you get the same symptoms.
If you do then I suspect that you have a screen/cable connecting screen problem.
But lets rule out software first.

greetings bro...!!
i was up all night flashing wms
i used mtty software so many times that its commands are like hard weird in my brain cant get them out now....lolzzz
my stubborn uni was still stuck on the same dead screen but the only fun thing was that every time i flashed a new wm it used to get stuck on diff colours blue red green black...lolzzz
i scratched my head and i scratched my ass to an extent that i guess it started thinking lolzzz
i got some nice screw drivers and opened up my uni..
damn dis thing is wicked and messy it has things dat i dont know about n havnt even dreamd of in my stupidest dream i hav been lost in a computer motherboard with some good virus as my friend n some bad scary virus but in my uni motherboard i would neva..!
so i just fixed it back...n it worked for a while n den i dont know what tickled its ass.
busted again...!!
i guess ill hit the HTC service centre.
thanx allot bro
respect for ur effort and help...

Hi
for some strange reason the option "incoming com port" in the blue-tooth setting on my jasjar has disappeared. i was wondering if anyone else faced the same problem or if there is a way around it? editing registry n stuff.
because of this the previously paired devices are working fine but the new devices are unable to search the serial/com port facility on my uni.
i have tried resetting but still no luck.
any suggestions?
also i would really appreciate if someone could give me a solution for reading arabic and other such languages on uni.
(btw i am using i.e.TML 8.5 Rom and when i installed it at first the functionality was present so it cant be a ROM issue.)

...
lol... sorry abt earlier maite! i just realized the ridiculous thing i just did. i was supposed to post the reply to ur prob and then start with my sad story but somhow i managed to skip step one .
i m not expert on the device but i like it very much so i when i got one with my o2 contract i bought another one sim free just so that one would keep other company. as far as ur issue goes i have faced almost the same prob in the past and the solution was
1) rotate the screen 90 to get acess to screws at the bottom of the screen.
2) open the screws screws ... btw u might wana check if they are properly fastend before you try this step as i observed that if the screws are properly tightened this problem may solve itself... carrying on open the screws and that would detach the screen from the hinges.
3) where the hinge comes off strip open the cover a little bit and you will see two connections, one for the backlight and one for display (just like any other LCD screen.
4) press the big grip like thingee i.e. display connector with a flathead screw driver to assure they are properly in place. because in my case the connector had come off and hence was causing the system crash. although in my case the screen was only going blue after a while not the whole color palette.
just try if this one works because i m not sure if imate people are going to be any help in this case. i tried calling them a few months back for the lenscover and they said they dont support this device any more :S.