Related
I have a 5.22 Bootloader and wondering how to back it up before downgrading to 5.15 from Jeff's tools.
Thanks. !
I tried with the XDATools but does not give option for Bootloader only ROM!
we made xdatools as safe as possible, no option to screw around with bootloaders.
I did create some other tools that you can use to backup your bootloader.
if you download these tools http://www.xs4all.nl/~itsme/projects/xda/tools.html
and run
Code:
pmemdump 0x80000000 0x40000 bootloader.nb0
that will save your bootloader in bootloader.nb0.
or you can use this pocketpc tool: http://www.xs4all.nl/~itsme/download/savebootloader.exe
it runs on your xda, and save your bootloader to a file in the root of your xda
Great thanks this works fine.... but when I run
pnewbootloader bootloader_v5_15.nb0 I get
Unable to find flash info offset, cannot disable bootloader writeprotect
I wish to upgrade to rom 4.0.x but would like to have a 5.15 wallaby before doing so. In case I need to downgrade back to 3.17.
Any help appreciated. Thanks. !
If their is no solution to this... Can I upgrade to 4.0.x and still be able to downgrade again later using another method!.
Hello,
this is the same error message I got when I tried to downgrade bootloader from 5.22 to 5.15. I was not sure if I am doing something wrong or what. I hope there is a fix to this.
Is the problem the Rom version or is it the 5.22 issue?
Use the old xdarit which gives an option to create a boot flash card. I have used this but as the developers warn this will "brick" your XDA if it goes wrong. My guess would be that you can downgrade to 3.17 on a 5.22 bootloader anyway. My advise would be to try that first because if it works theres no point in risking your bootloader and if it doesn't work you only have to reflash a 4.x image or try the old xdarit.
Richard
Thx for the reply, but the issue is how to downgrade to 3.17?
Program A is not working with this bootloader version (5.22) and I am not sure if XDArit will work with it.
Has anyone used XDArit with bootloader 5.22?
Perhaps I didn't make myself clear. I have bootloader 5.22 and have loaded 4.x images via flash using xdarit. I have also re-loaded bootloader 5.15 using the old xdarit to write a bootloader file.
Richard
Many thx Richard,
I do have an SD card reader (6 in 1) and I am not sure if this is the reason for the many errors I am getting when I try to use it. Recently posted posts say it could be.
I have also an image for the 5.15 bootloader.
Do I need the SD card reader to do the bootloader downgrade?
I have a six in one card reader and have the same problem you and many others have. In my case my SD card reader is disk six but I have to select disc 5 to get xdarit to see it. The bit to watch out for is to make sure that in selecting another disk it doesn't pick up your hard drive. The best way to be sure is to use the rom image tool to write a an image to your disk. Then using the old xdarit from the strat screen use the drop down list for the drives and you will see a load of data apear when you hit a valid drive you can recognise you have the right disk because you will see "Wallaby HTC" or simmilar. Then select write to disk and select 3.5k header and your 5.15 bootloader and write the file. when you put this disk in your XDA and enter bootloader mode it will offer to write it for you.
As I have said before I think you should try to write a 3.17 image to the disk first and try that. At the end of the day a corrupted rom is easy to recover from a corrupted bootloader = brick.
Also I have no problem with Program A and bootloader 5.22
Richard
No luck till now
Not sure what happened so far but I am unable to use my card reader now. Even when I connect it to a different laptop and insert an SD card from my camera, it says the card needs to be formated and even when I say ok format it, it says can't format.
When you right to the SD card using XDArit, my understanding that it will generate a file taht has the header required for bootloaders greater than 5.15. I am now ONLy trying to downgrade the bootloader. SO, the created file should be small. If you make this file available, would it be then easy to copy and pase it to a different SD card without using any tools?
Thanking yoy for your pateince
When you put your card in the SD card reader it is Windows that is offering to format it. xdarit does not need the card to be formated. If you put the card in and open xdarit can you see a string of data in the box ? If not use the drop down menu and try a different drive.
You can't (to the best of my knowledge) create a file that can be copied direct to the card because of the header required. i.e i can't email you one.
If you are having no joy reading from the card i.e you can't see the data as above try a different card perhaps the one you are using is duff.
Richard
It seems my card reader now has a problem.
I got an SD backup from an XDA that has bootloader 5.15 and the Rom CE
Now my Boatloader is 5.22 but this is what I am trying to get rid from. So, when I insert it in my device, it asks me if I want to press the action item to boot from SD. I am afraid that this will screw up my machine!
Is there a need that this file be written to the PC first then moved again to the SD card after checking the higher than 3.15 boatloader box?
Regards
If the backup you took was just the CE image then go ahead and restore the image. If you took a CE+bootloader image then you may want to transfer to your desktop and reload just the CE image but if your card reader is down I guess you can't do that. So if you have access to another XDA just redo a backup making sure you just have the CE image.
Why are you so determined to loose the 5.22 bootloader ? if it works on a 3.x image just leave it there its not doing any harm. If you are really nervous I will try a 3.x image on my XDA with 5.22 and let you know before you try on yours.
Let me know soon I live in Australia and its Friday night and the pub is calling.
Richard
You bet that I am nervous.
I would greatly appreciate your help in trying this first.
You can also e-mail me at [email protected]
Regards
I did try it and the Rom is downgraded now.
I still need to downgrade the bootloader so I can use XDAtools easily.
Will the same method work if I backup both the Win CE and Boot?
You don't need to HONHESTLY all the tools work fine on 5.22 BELEIVE me
If you must then yes is the simple answer but there is always a risk that it will go wrong and screw your XDA
Richard
Off to the pub now
OK got it all figured out!
I had:
A Rogers ATT (Canadian phone) running the Rogers ATT ROM.
Rom: R.20.x (don't remember) probably a 3.x
Radio Version: A.20.10
Bootloader: 5.22
Here are my steps. I will skip everything that went wrong on my journey and go straight to the point.
First I tried to use the new XDATools to upgrade the rom via Program A but with no sucess so used on method. !
NOTE: Their is not need in Canada to upgrade radio version cause the phone is already shipped with the latest. !
1- Used the old version of XDArit 1.0 to burn Wallaby Bootloader 5.15 from JEff's tools on my SD card (32Mb) with a Dazzle SD card reader
2- Inserted the card in my XDA and started the actual bootloader 5.22 and pressed action to download boot image.
3- Used XDATools (New version/product) to burn the SN40016wwe_vs.bin (see 4.0.16 rom is here post). (XDARit failed to get that one on the SD).
3- Inserted the card in my XDA and started the actual bootloader NOW 5.15 and pressed action to download CE image.
4- Did a soft reset and got T Mobile prompt... !
5- That's it phone works A1. !
Thanks for the info Yanick
So now u have 5.15?
What is SN40016wwe_vs.bin and where to get it from?
Is it specific to the ROm version you are upgrading to?
Hello,
I have to say I am kinda of lost now (not unusal :lol: )
I was thinking that the problem is in the boatloader but when I followed your method, my XDA seems to run 5.15 now.
Why an I still unable to use the XDAtools to write a new Rom file?
When I try to, I go as far as seeing upgrading in the laptop and on the XDA screem but then the connection (I use USB) is lost between the laptop and the XDA
When I try to upgrade the RSU (an excutable file), it goes as far as downloading the file to my XDA and restarting it to get a button saying start on my xda screen. When I press it I get the error message saying "als Failed " after 1% downloading?
If it is not the bootloader that was the problem, what is it?
Or am I having a non 100% functional bootloader now (5.15) or what?
:shock:
OK so you are running Bootloader 5.15...
Now download 4.0.16 ROM CE from
refer to this topic for download
http://xda-developers.com/forum/viewtopic.php?t=2354
Then Use XDATools to burn image on a 64MB or greater SD card. Then Reset your PDA using (RESET + POWER) combination with the SD card already in the machine and it should prompt you to download CE .. Press Action and here you go !
Hi,
I have a TMobile pocket pc, Rom version: 3.08.10 and Radio Version: 6.02, I want to upgrade it to WM2003, the problem is that I don't have a tmobile phone number, I saved my ROM on a sd card with the Wallaby Bootloader, I downloaded the "XDA OS Image Tool", could I put the "T-mobile ROM Windows Mobile 2003 upgrade 4.00.21" from Yorch and if it doesn't work just reload the old version with Wallaby?
Could I cook a Rom in the Kitchen and install it or I need PHP support?
Thanks
Yes to all, also you'll need to upgrade your radio stack to get the always on GPRS.
BTW where are you located?
HTH
How do I upgrade my radio? I'm in NY but I need the phone also in Europe.
when you said yes you mean also for the kitchen I need PHP support, does that mean a server like Apache installed on my computer?
btw in Wallaby I saved with the first option to the Sd, I think it was CE ROM TO SD, is that ok or I need to do something else?
mml770 said:
How do I upgrade my radio? I'm in NY but I need the phone also in Europe.
when you said yes you mean also for the kitchen I need PHP support, does that mean a server like Apache installed on my computer?
Click to expand...
Click to collapse
Yes on the kitchen!
The best way to upgrade the radio stack is to copy the needed files to
your devices Windows folder and install it from there. If you send me a PM with your email address I'll send you the needed files.
You lost me on the needing PHP support, why do you need that?
HTH
what are all these instructions at http://xda-developers.com/ROMkitchen/, is it for someone that wants to run the kitchen on his computer?
should I use the kitchen version .16 or it's more secure the .21 from yorch with XDA OS Image Tool?
mml770 said:
what are all these instructions at http://xda-developers.com/ROMkitchen/, is it for someone that wants to run the kitchen on his computer?
should I use the kitchen version .16 or it's more secure the .21 from yorch with XDA OS Image Tool?
Click to expand...
Click to collapse
Yes those instructions are for setting up your own kitchen.
I'd go with .21 cause thats what I'm using.
BTW you can also get ROM version 4.0021 from http://www.yorch.net
under Software.
HTH
I have the 4.00.21 version from Yorch my last question is what I need to select in Wallaby?
1. CE ROM TO SD
2. BOOT TO SD
3. CE+BOOT TO SD
4. GSM ROM TO SD (I guess not)
5. CE + GSM TO SD (also probably not)
Thanks...
Pick door number three and make sure that you have loaded onto the sd card only the nbf file from Yorch's site.
valheru said:
Pick door number three and make sure that you have loaded onto the sd card only the nbf file from Yorch's site.
Click to expand...
Click to collapse
you got my a little confused... I thought of backing up to the sd the actual rom and then writing the nbf file to the device, but now you said to load the nbf file to the sd... could please explain...Thanks
Okay, get the os toolset, an sd card reader/writer, an sd card of at least 64mb and do the following:
-install the os toolset
-put device in cradle
-run ostoolset and backup your ROM to your hard drive. Name it something like ppc2002-10-13-03 or something similar. This will backup your ROM only, not any installed programs
-remove your device
-insert the sd card into the reader/writer
-open os toolset again and select the new rom you downloaded from the internet
-select the sd card as the installation drive
-once its done copying put the sd card into your device
-run the wallaby bootloader and have it install the os to your device.
-hard reset when done as directed and BINGO
*** I will point out that it seems you have not read very many of the posts here. DO THIS BEFORE YOU DO ANY OF THE ABOVE ***
I'm actually going through this forum for a week till I decided to ask, since nobody wrote clearly how to do it, Thanks!
Now since I don't have a sd card reader, before I get it, is it possible to upgrade directly without having to do it with the sd card?
Another question, with which extension do I save the backup of my ROM, nb1, img, bin.
Thanks again
what's the difference if I copy the .nbf file to the SD reader or if I just copy it to the sd through the device?
Once again, please read the posts. You can't copy the file to the sd card while in the device for it will only copy the file as a file instead of copying it as a bootable interface. If you don't understand this then you should definitely read more posts. No offense.
You can, if you wish, just us the OS toolset to overwrite your device ROM with any ROM you choose. Just go to the ROM TOOLSET forum to download and follow the instructions there. It is very easy but be careful. I just believe in the aforementioned method for it forces you to take steps to prevent a total loss. I wish you the best of luck.
Oh, if you really want to update your ROM, etc., invest in a card reader. It'll cost you less than $30 which is less than 6% of what you paid for your device most likely.
No matter what you do make a backup of your current ROM!
valheru, thank you very much for taking your time, belive me that I really read allot of posts, if you could direct me in a thread that speaks about this I'll be very happy instead of using your time!
Now I just copied the nbf file to the sd card with OSImage Tool, and when I went in Wallaby it gave me the option to upgrade the ROM, is that ok? or I still need a sd reader,
Thanks again for all your help!
That sounds alright but make sure you make a backup of your current ROM first!
Great!!! It works, now one last question the Radio Version is 6.02, Qman what version did you send me and how do I upgrade?
ok here are the istructions to upgrade to ROM 4.00.21 for a TMobile Pocket Pc Phone Edition.
You just need a sd card of at least 64MB (maybe 32Mb will also work).
Download the OSImage Tool from http://www.xda-developers.com/XDAtools/ and install it.
Download the Upgrade to 4.00.21 from Yorch.net http://www.yorch.net/downloads/ROMS/T-mobileROM40021.rar.
-put device in cradle
-run osImage Tool and backup your ROM to your hard drive. Name it something like ppc2002-10-13-03 or something similar. This will backup your ROM only, not any installed programs
-open osImage Tool again and select the new rom you downloaded from the internet
-select the sd card as the installation drive
-run the wallaby bootloader and have it install the os to your device.
-hard reset when done as directed and BINGO
(as you could notice some lines where copied from a previous post of valheru, sorry for not giving credit in the begining... :wink: )
@ mml770
When cutting and pasting someone else's post it is polite to quote them or at least give credit to them....hint hint 8)
mml770 said:
Great!!! It works, now one last question the Radio Version is 6.02, Qman what version did you send me and how do I upgrade?
Click to expand...
Click to collapse
Boy you guys sure have been having fun, I see! 8)
Its radio stack 6.24.
To upgrade just unzip then copy the four files to your devices Windows folder then run RSUpgrade.exe from there.
I have a siemens sx56 with AT&T. I was trying to upgrade the ROM version to unlock it. Using XDA developer software and during this process, somehow the connection between the computer and the phone stopped (active Sync). Now the phone is not responding and the screen still displaying the upgrading process. I tried to reconnect but the Active sync does not recognize the devise. I read in this forum that you can solve this problem by using SD card with a good ROM version. Here is what I did. I copied the NK.nbf to the SD card using my computer SD read/write slot. I inserted the SD card in the phone and did the boot loader mode. What I got is "Wallaby boot loader v5.22 GSM OK" that set. Does the phone will automatically ask to press action to start flashing or I have to press a certain key. I tryed all the keys but they give me different tests that they work fine. So far I am not able to find the key that will install the the cooked rom. After that, when I tried to use the SD card in the computer, it did not recognize the card and ask me to format the SD card. I tried the fat and the fat 32 format and download NK.nb1 and/or NK.nbf and again I got the samething. Do I need to down load the ROM file using the XDAtool or just copying the file from the computer to sd directory will do it. I would really appreciate it if someone points out the best way of handling this problem (i.e. get the phone to work with the appropriate ROM and unlocking it) thanks.
Seif said:
I have a siemens sx56 with AT&T. I was trying to upgrade the ROM version to unlock it. Using XDA developer software and during this process, somehow the connection between the computer and the phone stopped (active Sync). Now the phone is not responding and the screen still displaying the upgrading process. I tried to reconnect but the Active sync does not recognize the devise. I read in this forum that you can solve this problem by using SD card with a good ROM version. Here is what I did. I copied the NK.nbf to the SD card using my computer SD read/write slot. I inserted the SD card in the phone and did the boot loader mode. What I got is "Wallaby boot loader v5.22 GSM OK" that set. Does the phone will automatically ask to press action to start flashing or I have to press a certain key. I tryed all the keys but they give me different tests that they work fine. So far I am not able to find the key that will install the the cooked rom. After that, when I tried to use the SD card in the computer, it did not recognize the card and ask me to format the SD card. I tried the fat and the fat 32 format and download NK.nb1 and/or NK.nbf and again I got the samething. Do I need to down load the ROM file using the XDAtool or just copying the file from the computer to sd directory will do it. I would really appreciate it if someone points out the best way of handling this problem (i.e. get the phone to work with the appropriate ROM and unlocking it) thanks.
Click to expand...
Click to collapse
Bro, you shouldn't change the Sd fat you erased what's written on it anyway your unit is still on the safe side and you can bring it to normal.
First of all downgrade your bootloader to 5.15 >>>
goto this http://forum.xda-developers.com/viewtopic.php?t=3274
Hi,
I also have exactly the same problem with my Siemens SX56 as those of Seif's. My Wallaby's boot loader version is 5.22. Ramram said that the first thing to do is to downgrage bootloader. But I couldn't understand how to downgrade the bootloader because I do not have a copy of old bootloader. Should I use 'OSImageTools' or 'XDArit' to write backed up CE image to SD card?
Seif, how did you solve your problem?
Best Regards
rafia said:
Hi,
I also have exactly the same problem with my Siemens SX56 as those of Seif's. My Wallaby's boot loader version is 5.22. Ramram said that the first thing to do is to downgrage bootloader. But I couldn't understand how to downgrade the bootloader because I do not have a copy of old bootloader. Should I use 'OSImageTools' or 'XDArit' to write backed up CE image to SD card?
Seif, how did you solve your problem?
Best Regards
Click to expand...
Click to collapse
You need XDArit to write the rom to your SD read the past post on how to copy rom to your SD which is the safest way of installing the rom into the device, by using XDAtools press on FIX BROKEN BOOTLOADER this will downgrade you bootloader to 5.15 don't forget to connect your unit to the cradle when you want to downgrade.
I recommend 1rst of all to make a quick search in threads to be totaly ready for this
this would help :
http://forum.xda-developers.com/viewtopic.php?t=6581&highlight=downgrade+bootloader
http://forum.xda-developers.com/viewtopic.php?t=2068&highlight=downgrade+bootloader
Good Luck now.
Update : How to fix failure during upgrading ROM
The problem was solved. Here is what I did. I copied the NK.nbf file to the SD card using the XDAtools. It seems that the XDAtools uses special format for the bootloader that well recognize the ROM file on the SD card. Rafia your bootloader (v5.22) is fine you do not need to downgrade it.
You should follow this procedure:
1. Install ActiveSync that comes with the device.
2. download XDAtools from this site and install it in your computer.
3. Cook the ROM ( or get it by extracting the zip file from the XDA developers special edition ROM.)
4. Use the XDAtools to copy the cooked NK.nbf file from your computer to the directory of the SD card
5. Insert the SD card in the dead device and go to the bootloader mode (soft reset while pressing power key). Make sure it has more than 80% battery before starting.
6. If it is still working and the bootloader ver. is older than 6.22, it will ask you to press action to start flasing.
7. Once finished, remove the SD card and hard reset, wait 60 sec and hard reset again.
Good Luck and special thanks to Biso for his help.
Re: Update : How to fix failure during upgrading ROM
Seif said:
The problem was solved. Here is what I did. I copied the NK.nbf file to the SD card using the XDAtools. It seems that the XDAtools uses special format for the bootloader that well recognize the ROM file on the SD card. Rafia your bootloader (v5.22) is fine you do not need to downgrade it.
You should follow this procedure:
1. Install ActiveSync that comes with the device.
2. download XDAtools from this site and install it in your computer.
3. Cook the ROM ( or get it by extracting the zip file from the XDA developers special edition ROM.)
4. Use the XDAtools to copy the cooked NK.nbf file from your computer to the directory of the SD card
5. Insert the SD card in the dead device and go to the bootloader mode (soft reset while pressing power key). Make sure it has more than 80% battery before starting.
6. If it is still working and the bootloader ver. is older than 6.22, it will ask you to press action to start flasing.
7. Once finished, remove the SD card and hard reset, wait 60 sec and hard reset again.
Click to expand...
Click to collapse
Thanks a MILLION for this info. I'm in the same boat, with bootloader 5.22. One question though, when I'm in bootloader mode, which option do I choose from the menu to transfer the ROM to my device from the SD card? Will there be something automatically coming up? Or will I use one of the options listed below:
1. CE ROM TO SD
2. BOOT TO SD
3. CE + BOOT TO SD
4. GSM ROM TO SD
5. CE + GSM TO SD
By the way, so I never do anything to ruin my device again, can someone please explain what each option does?? I really don't have a clue.
as you can read from the menu you type in all these options are to the SD card
and they are to backup i suppose
rom upgrading should start automatic when a sd card with valid rom is in the sdport
and you are in the bootloader
maybe it ask you i forget but it's not something you have to find browsing
the menu's
Rudegar said:
as you can read from the menu you type in all these options are to the SD card
and they are to backup i suppose
rom upgrading should start automatic when a sd card with valid rom is in the sdport
and you are in the bootloader
maybe it ask you i forget but it's not something you have to find browsing
the menu's
Click to expand...
Click to collapse
Thanks for answering my question. Now I simply need to find a really good ROM to use to load back onto my device. What I would like to do is end up with Windows Mobile 2003, but the device is locked at the moment.
Can someone recommend a ROM for me to load onto the device so that I can then unlock it and THEN upgrade to 2003? Or is there a 2003 ROM out there that will also unlock? Originally, I ended up in this predicament by upgrading to the 2003 upgrade from Rogers AT&T, but that locked the device on me. I then tried to use a cooked 2003 ROM, and that's where I am now, without a useable device.
Thanks for all replies!
Linger1974 said:
Rudegar said:
as you can read from the menu you type in all these options are to the SD card
and they are to backup i suppose
rom upgrading should start automatic when a sd card with valid rom is in the sdport
and you are in the bootloader
maybe it ask you i forget but it's not something you have to find browsing
the menu's
Click to expand...
Click to collapse
Thanks for answering my question. Now I simply need to find a really good ROM to use to load back onto my device. What I would like to do is end up with Windows Mobile 2003, but the device is locked at the moment.
Can someone recommend a ROM for me to load onto the device so that I can then unlock it and THEN upgrade to 2003? Or is there a 2003 ROM out there that will also unlock? Originally, I ended up in this predicament by upgrading to the 2003 upgrade from Rogers AT&T, but that locked the device on me. I then tried to use a cooked 2003 ROM, and that's where I am now, without a useable device.
Thanks for all replies!
Click to expand...
Click to collapse
First of all get the "Special Edition Rom" to your device Unlock it then cook any other Rom you prefer
Special Edition Rom at http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
Good luck
First of all get the "Special Edition Rom" to your device Unlock it then cook any other Rom you prefer
Special Edition Rom at http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
Good luck[/quote]
Thanks, Ramram. I'm sure I'll have more success this time, but it's just odd that I went from a 2002 ROM, which was unlocked, to the Rogers 2003 ROM, and the phone was locked after that.
I guess I should stay away from that Rogers ROM then?
Linger1974 said:
First of all get the "Special Edition Rom" to your device Unlock it then cook any other Rom you prefer
Special Edition Rom at http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
Good luck
Click to expand...
Click to collapse
Thanks, Ramram. I'm sure I'll have more success this time, but it's just odd that I went from a 2002 ROM, which was unlocked, to the Rogers 2003 ROM, and the phone was locked after that.
I guess I should stay away from that Rogers ROM then?[/quote]
Why to worry about the Rogers Rom you know now a way to unlock your phone.
I assume the Rogers rom is based like the At&t rom which it has the sound clipping bug , so I'd rather say that you could cook a T-mobile rom 4.01.16 WM2003 and try it it does not have the sound clipping bug..
Where can I get the rom PPC2002 to be used with the SD Card?
I have a wallaby with the offical T-Mobile USA ROM (4.0.16 ENG) and would like to upgrade it to the WM2003SE.
I have cooked a new 2003SE rom from lumpisteven's romkitchen. Man, I'm really impressed with this nice web site!
However, my wallaby cannot accept the flashing from the exe file directly. I noticed Lumpi's note that I might need to downgrade to PPC 2002 first before by using the SD card method.
I looked for the PPC2002 rom in the xda-dev romversions list, all of the rom there are in the EXE format. Where can I find such version that can be used to flash my wallaby from a SD card?
Thanks!
Extract the EXE-File using winzip. YOu will get a folder english that contains the ROM NK.nbf (about 32 MB). You have to use this file for SD-Card flashing....
Stefan
Thanks LumpiSteven! I follow your instruction and I have succesfully got my Wallaby loaded with WM2003SE!
So, ive read post after post on performing this task and it is still beyond my capabilities. My wallaby is running ppc2002, rom version is 3.20.06, radio version 4.21.01 protocol version 32s54. It's running bootloader 6.22, i havent got active sync, xdatools wont run due to missing dll's or some such thing. Have a 1gig sd and a 512mb mmc,,,,
How can i upgrade with this setup? visited rom kitchen (awesome site) and cooked up a rom, extracted NK.nbf,
Need help! Surely i can upgrade with this equipment,
http://www.romkitchen.de/ make an exe then
Rudegar said:
http://www.romkitchen.de/ make an exe then
Click to expand...
Click to collapse
So is the exe executable from an sd card?
no the exe is only for activesync upgrades
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
how to flash using sd
if the tool is missing dll's then type in the name of the dll in google and find a place to get the dll and it will work
Rudegar said:
no the exe is only for activesync upgrades
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
how to flash using sd
if the tool is missing dll's then type in the name of the dll in google and find a place to get the dll and it will work
Click to expand...
Click to collapse
Right, well got active sync which meens the dll's i needed are in system 32 or whatever. But,,, Does bootloader 6.22 cause problems?? Thanks for all the help,, sure this fone is a bit old but who cares. Massive screen, runs office, windows media, touch screen, great fone
Any suggestions? I cant be the only one without a data cable or cradle. At the end of the day i want the fone to run best as possible. I am thinking there is alot more compatable software for wm2003 then ppc2002? @ the moment im running mame and pacman,,,,,,,, Speaking of software, is the media player in 2002 meant to be slow? As far as video go's ive given up there.
what is your problem?
Problem is i dont seem to be able to downgrade from bootloader 6.22 to 5.15 so i can update the rom to 2003. doing ll this without a data cable or cradle.
Bootloader should not cause any problems.
Missing Dll´s for XDATools came as you have ssen correctly form ActiveSync. So you need to install this programm on your PC to use XDATools. Afterwards you will be able to wirte the ROM on your SD-Card and then flash the new ROM on your device.
So if you don´t have any cradle or cable, and don´t sync with ActiveSync, how did you manage your conacts,install software, exchange files, ....?
Stefan
I see the confusion
I have card reader's on the front panel of my pc. So i am using xardit to transfer the bootloader images onto either an sd or an MMC card. So i transfer the patch with the NB2 extension on to the card. Cold reboot xda and it gets to the normal screen telling me i need the keycard.
I can use either xdarit or isoimagetool to transfer the .NB1 file on to an SD.
I have no data cable, so these are the only methods i can use. Just pc with multi card card, sd car, mmc card.
LumpiStefan, the rom kitchen is a damn fine peice of work!
when i had a wallaby i only ever flashed it using a sdcard reader
was pretty easy used ositool put the nbf / nb1 on the sdcard
after which the cardreader could no longer read the sdcard(that mean it's successfully planted)
then i put in the sdcard and entered the bootloader and it autostart upgrading
and when it's don i hardreset and thats it
Hi And thanks
I have tried this with a 1g toshiba sd and a 512 sandisk mmc, neither seem to auto start an update. I have browsed the web a bit and have found different theories on bootloader being a problem. My card reader is a panel on the front of my pc, or using my ngage. tried formatting fat16 or fat32. Im sure it's currently ppc2002 as this is the first screen after the o2 water screen
I think your problems come from your card reader. Many people have reported, that the internal card reader causes problems in writing the ROMs in correct way on the cards. I would s uggest to use an external card reader/writer.....
Stefan
and those are only 10£$€'ish
Thanks guys for your help, all up and running now. I appreciate the advise. Rudegar, my problem was getting the wrong info from elsewhere, the solution was the card reader, Cost me $9.00 au to buy one. I thank you both