How to unlock/unhide the Extended Rom in JAM/qtek s100 - JAM, MDA Compact, S100 General

hi everybody, i am kinda newbe here
i hope everybody is fine and having good tiem wid their jams/qtek
can any body tell me How to unlock/unhide the Extended Rom in JAM/qtek s100
thanks
raheel

From another post (just search before asking )
Even Resetting is not necessary, just locate the file in your Windows folder ( it may be hidden, so don't use File Explorer on your PPC, but from your Desktop PC or Total Commander on your PPC) and tap on it. In File Explorer the Ext Rom folder wil be visible without any need to reset. Once you have done that, the next time you reset ( hard or soft) the extended rom will be hidden again. To counter that, just copy loadVDisk.exe from your Windows folder to the Sart-up folder, it will be loaded after every reset and the Ext Rom will stay visible.

Ok for the unhide, what about the unlock to delete and write to it ? ;-)

There is a full thread about this : http://forum.xda-developers.com/viewtopic.php?t=18677
Si même les français ne cherchent pas :wink:

Hum...did you read my question ? As I fasr as I ca can tell, this thread deals with UNHIDING the Extended ROM or does your link mean it is not possible to UNLOCK the ER on the Magician, you might as well have said so instead of posting a link.

I also see many people talk only about UNHIDE.
I search the wiki.xda-developers.com and found that The Magician doesn't have Disk On Chip like XDAII. The ExtROM of the Magician is not locked Read Here
What we need is Somebody to write a program to deal with the ExtROM.

i need to unhide as well accessible Ext rom as it has some free space i think round about 10MB, i want to use this space as JAM has very less memory to install other sofwares, soo is there any utility yo unhide and then can made accessible read/write ext rom.

I don't see any software to do such thing.

thanks for the link, "writing to this flash memory can be done in way very similar to how pnewbootloader flashes the bootloader. use extreme care when doing so. one typing mistake may destroy your device. there are no safeguards" doesn't sound too good does it !

Related

ExtROM Cab Files

Hi all,
I've had my S100 for a week now. It came with ROM ver 1.06 (I think) and right on the 1st day I upgraded to 1.11 and finally decided to apply Anansky's Big Storage ROM. All work perfectly even with my Jabra BT800. I've been trying many different 3rd party software. As usual, after installing and deinstalling, my unit became unstable and therefore would like to start from scratch.
In XDA's ftp site there is a Qtek 1.11 Ext ROM zip file. At first I installed all, but I think I could do away with some. Based on the filenames, some are self explanatory but I don't know which ones I can do without. Could someone be kind enough to explain?
Delete_vdisk_shortcut_WWE.sa.CAB What does this do?
Caller_ID_Magician_Generic_WWE_RC13.CAB Selft explanatory
SmartDialing_Magician_Generic_WWE_RC13.CAB I've read in other threads that some don't install this when using sw like MSVoice Commands.
PhonePad_Magician_Generic_WWE_RC12.CAB I think this contains T9 and what else? How can I edit this file to remove unwanted languages other stuff?
CAB-ArcsoftMMS-20022-Magician-Generic-ENU-08Mar05.cab I believe this is essential, right?
CV2.41.386_WWE.CAB No clue. Is it essential?
JMM101257_WWE_1004.CAB No clue. Is it essential?
BTHUSB_PATCH_AKU26.CAB Self explanatory
Version_WWE_111129.sa.CAB What is it for? Is it essential?
And does anyone know of how to delete these .cabs? I hit soft reset before it autoloaded all of those above mentioned .cabs. IS it possible to delete them or at least make them non accessible?
johnannie said:
And does anyone know of how to delete these .cabs? I hit soft reset before it autoloaded all of those above mentioned .cabs. IS it possible to delete them or at least make them non accessible?
Click to expand...
Click to collapse
If you have the Anansky ROM installed I don't think you will have the option to install the extended ROM when you do a hard reset, mine doesn't. You have to install the extended ROM seperately. You should have made a backup of your extended ROM before doing the Anansky hack. If you don't have it, maybe you can download it from the XDA ftp site. Remember only install .cab files, don't execute the autorun or you may wipe out your big storage. Even if you install all of the Ext. ROM files, they don't take up much space in the storage area (maybe 1.5 or 2 meg.) depending on your Ext. ROM.
Thanks for the responses but I would like some information from you experts on the following:
1. Which CAB files can I do away with and why?
2. How can I edit the PhonePad.CAB in order to remove unwanted languages? Any special software needed?
The Qtek 1.11 ExtROM found in this forum's FTP site has 9 CAB files. Some of them like the Caller ID is self explanatory, meaning this must definitely be installed if Caller ID is one of the functions one needs.

Unlocking extended ROM

Really sorry - can someone point me in the direction of a tool that unlocks the extended ROM for a Wizard? I'ves searched but I can't find Am I being blind?
I need to free up some space and want to get rid of those imate .tsk files but need to unlock the ROM first.
Thanks
Mat
Try this one
Download this
http://www.ghisler.com/pocketpc.htm
Then type (after install)
“\Extended_Rom\”
and walla
Didi
...
Hi,
can somebody explain how i can delete the files in extended rom ? i tried with TC and the files seemed to be deleted, but after the hardreset they were still there.....I want to get rid of them and install some other programms too.
Thanks and regards
Joachim
...
Hi,
can somebody explain how i can delete the files in extended rom ? i tried with TC and the files seemed to be deleted, but after the hardreset they were still there.....I want to get rid of them and install some other programms too.
Thanks and regards
Joachim
Ok Total commander gives you access to the extended rom using the method just posted above.
But if you want to actually have the extended rom showing all time, then you need this...
http://forum.xda-developers.com/viewtopic.php?t=33680&highlight=extended+rom
The extended rom unlocker will give the actual extended rom as space deginated extended_rom2 and its about 9.85mb size or something with between about 350kb and 2.5mb of .cab files in it depending on whether its a Qtek (Which has the least amount of files), I-mate, o2 or T-Mobile, these last two probably (along with Orange) will have the most 'junk in them.
Once you have ran the exteneded rom unlocker and soft reset your device it will be accesible through file explorer you won't need TC.
You can then go in and delete (be careful to make sure what everything does first) its your own responsibility, and remove what you don't need.
For example on the I-mate Extended Rom you cane remove Backgammon, Skype and the anti virus prog. There wasn't much on the Qtek Rom I just put on mine just clearvue and soemthing else inconsequential, there was no skype or antivirus, but I believe some Qtek roms might have this.
T-Mobile is abother story, there is a shedload of crap in the extended rom, ranging from a today screen toolbar to small progs, there is list knocking about of what each file does. When I changed from T-Mob to I-mate and then Qtek I just transferred the T-Mobile GPRS settings and the GPRS disconnect button .cab and put them in the exteneded Rom myself and let it run.
Also on I-mate Rom there are carrier settings that you can delete which won't apply to you, basically lots fo countries phone settings, like o2 UK, T-Mobile Spain etc etc, depending on where you are in the world.
You can't delete the I-mate .tsk todayscreens as far as I know, they are not in the ExtRom. The Qtek ExtROm doesn't have the extra .tsk's just default and the Guava Bubbles one.
If anyone wants the T-Mobile GPRS .cab and GPRS disconnect button .cab I can send it through msn or email.
that doesn't work either. I treid with the unlocker and deleted the files with TC. If i check the content no files are there, but when i try to copy other files to the ext. Rom it says that the volume is write protected. I softreseted several times also.
Any hint on that ? How have all the others deleted the files in extended rom ?
Regards
Joachim
batman08 said:
that doesn't work either. I treid with the unlocker and deleted the files with TC. If i check the content no files are there, but when i try to copy other files to the ext. Rom it says that the volume is write protected. I softreseted several times also.
Any hint on that ? How have all the others deleted the files in extended rom ?
Regards
Joachim
Click to expand...
Click to collapse
Might not work for you but it worked for me and a load of others. Once the extended rom is visible you can delete files easily, you don't need TC like I said. Its easier to put additional cabs into my documents sync them across and just run them.
Yeah, that's a pitty.... I have the Vodafone VPA Compact II, which is the Wizard 100 afaik.
Someone around here has the same model and succeeded in removing the cabs from the extended rom ?

Extended ROM; How can it be made useful?

Hi there,
I made visible the extended ROM of M600 with registry tweaks seen in this forum. I dont use any of the programs on the extended ROM, coz I dont like my phone to be customised for my service provider. (I soft reseted while it was trying to customize after the hard reset).
Now I have a 10MB of Ext ROM on "My Device". My qustions are;
1) Is this Ext ROM just like another 10MB SD Card?
2) WOuld this space make the my handheld run faster? or can this be made available fot programme memory?
3) Is there any advantage of installing programmes on it compared to on th SD Card?
Currently I have about 3MB of Orange CAB files on it. None of them I use.
How can I use this space efficiently?
Thanks in advance for any comments
ps: Another thing I just remembered is that, after I made this Ext ROM visible, I cant save the camera pics to SD card. The options on the camera settings are to save it on Main Memory or Ext ROM! it doesnt recognise SD card! funny! Any way around?
Anyone please..?
I order:
1) Yes it is exactly like a 10MB SD card, you just can't remove it from the device. If you need to hard reset it will become hidden again but the data will not be lost.
2) No. Program memory is RAM and this is FLASH. You can only use it for storage.
3) It is mounted before the SD, so if you have an app that needs to run on start up, you can put it on the ext ROM but not the SD.
4) I suggest you move the Orange cabs to your PC. Having the i-mate variant I had 9MB filled with stuff out of which all I needed were Skype and Voice speed dial. Then use this space for the basic and most needed apps. Also some apps like TCPMP can be used with content from different SD cards so ext ROM would be a good place for them. I try to keep main memory free for outlook stuff.
5) Yea, the camera app only seems to recognize the first storage card it sees. Don't know about a fix for that.
levenum said:
[...]
5) Yea, the camera app only seems to recognize the first storage card it sees. Don't know about a fix for that.
Click to expand...
Click to collapse
Thank you very much, Levenum!
I finally understood a bunch of things about the ExtROM.
About this 5th point, I would add something.
The same identical problem raises when the \Network path created by Resco Explorer is shown on the main memory root.
The internal camera seems able to access only to the first two objects in the mountpoint list (you can see this list when installing some apps, as the dest options radio button)
So, question comes out: what about hiding ExtROM again after installing startup apps on it ?
I mean: are those apps still runnable, when staying on a hidden mountpoint ?
Thanks for any answer
..._
Sorry to butt in on this topic, but I have also been thinking of doing this.
I would just like to know though once the Extended Rom has been unlocked as described in many past posts, can you lock it again?
I am just asking this because, what happens if I have to return the phone? Surely messing with it would void any warranty?
I would need to restore the CABS back to Extended Rom, and then lock it before returning it.
Thanks
Val3r10 said:
So, question comes out: what about hiding ExtROM again after installing startup apps on it ?
I mean: are those apps still runnable, when staying on a hidden mountpoint ?
Click to expand...
Click to collapse
Interesting, I never tried it. Perhaps if you don't change the MountHidden flag, but only the MountOrder.
NewSPV said:
I would just like to know though once the Extended Rom has been unlocked as described in many past posts, can you lock it again?
Click to expand...
Click to collapse
I don't know about other devices, but in case of the Prophet it's just a matter of changing back the registry values and soft resetting.
Thanks for that.
I have already backed up my Extended Rom, as Total Commander let me copy the CABS without unlocking the Extended Rom.
Orange has only added 1.95 MB which seems such a waste of vital memory.
I have heard that approx 10 MB is set aside for this. Is this set physically in manufacture by HTC? Can the extended Rom be merged into main memory like partitions can be merged on a PC?
Thanks
I read somwhere that removing things from the extended rom gives the device more storage available and shown int he memory part of settings. This however is not true, the extended rom is a seperate partition, full or empty the device will work the same.
I use mine to store the cabs of installs I use when I hard reset. Saves me copying them over each time.
Thanks very much Levenum and others who contributed. That was very informative and I am glad many others have benefited with this thread.
Cheers
One note:
I made a little experiment this Friday, which require a me to restore my Jamin to it's original state. (Hard reset + restore ext ROM).
I didn't check the CAB attributes when I copied them so even though the ext ROM was in it's original state all cabs that were used after first hard rest were deleted and didn't install after second hard reset.
So when restoring your ext ROM make sure you mark all CABs 'read only'.
I unlock ExtRom and put mein cab, edit config.txt.
But after HardReset mein cab didn't installiert.
I think, dieses cab need to signen.
Help me please signen mein cab or any cab theoretically.
you also need the modified autorun.exe, the config file isnt read by the default one.
dannyoneill said:
you also need the modified autorun.exe, the config file isnt read by the default one.
Click to expand...
Click to collapse
dannyoneill, wie kann man das machen? :shock:
..Sorry, how kan das make?
See this thread for more info
http://forum.xda-developers.com/viewtopic.php?t=38957&highlight=autorun
dannyoneill said:
See this thread for more info
http://forum.xda-developers.com/viewtopic.php?t=38957&highlight=autorun
Click to expand...
Click to collapse
I have renamed the file so:
my_file.cab -> Default_my_file.cab
All the same it is not installed!
There it is spoken about Wizard, i have O2 Xda Neo.
Where it is possible to take patched file Autorun.exe?
Can somebody to lay out it if it´s have?
Please, help me.
as the thread says, you cant just rename the file as it needs to be signed and designed for wm5 for it to isntall. To do your own cabs you need to have a special autorun.exe that reads a config file.

JAMin + changing ROM

Hi Guys i own a imate JAMin that i bought and it has telstra branding on the phone/pda, it isnt locked to this carrier, but i need to get rid of there loaded stuff on the pda
what i need to know is a few things if possible please
1. is there a walk through somewhere on how to change the rom to a standard one
2. where can i download a new rom from
3. can i screw it up bad ?
any other help would be great
Thanks
t0ne
Easy, just download Total commander from http://www.ghisler.com/
Open it up and at the top type \Extended_Rom
This will show the contents of your extended rom, you will see loads of things but the ones you want are the cabs relating to your provider. Or all providers actually, Delete allt the cabs that dont start with Default_ these are what brand your device when you hard reset.
Now just hard reset, it will isntall all the normal stuff but will leave you with a brand free jamin.
Hi dannyoneill,
thanks for the program, only problem i have is how do i add the jamin to it so that i can see it and do what u r saying ?
thanks
You need to download and install Windows CE FS plug-in. You will then see a mobile device entry in the file window. I recommend dragging it to the toolbar so you will always have a button for convenient access (total commander can open files directly form the device).
Also I don't remember it now, but if you search this forum there is a registry tweak that will unhide your extended ROM so you can use it for extra storage space (and manipulate files in it using regular explorer both on device and PC). You can use the free PHM Registry editor to apply the tweak.
Just follow the instructions to install total commander onto your PPC. Make sure you click the link to the mobile version and not the desktop version.
thanks dannyoneill, got it working..
jsut a few other questions if u dont mind
im in the \Extended_Rom folder with the default stuff but the telstra stuff i want to get rid of has Default_Telstra_australia_SA_UN_V2.20.CAB and also Default_Australia_Telstra.CAB as the file names, will these be ok to delete still ?
thanks
Yes, you can delete them.
If you really want everything here is safe to delete. What it usually contains are patches like driver updates, applications like the backgammon, antivirus and Skype.
Below is taken from another post, its a little out of date but still good to see whats what. For me. I removed all the operators apart from my own (as it doesnt brand) plus got rid of backgammon, antivirus (totally useless on a PPC) and skype as the latest version is better (especially if you apply the registry fix to get it working)
Autorun.exe
Default_Backgammon_PPC_IMAM001.CAB >>> Backgammon
Default_CAAVPPC_IMEI_Wiz_range.CAB >>> THE DREADED ANTI VIRUS STUFF
Default_CAB-shortcut-CDL-08Sep05.CAB >>> Clearview PDF
Default_cdl_wwe_version.cab >>> Some Imate stuff (Harmless)
Default_ie_view.sa.cab >>> Some Imate stuff (Harmless)
Default_Imate_PPC_SA_V5.5.03.cab >>> Some Imate stuff (Harmless)
Default_SkypeForPocketPCnonxScale.CAB >>> SKYPE FOR NONE XSCALE !!!
Default_SmartDialing_enable_0915_signed.CAB >>> The pretty Dialer and smart-dialer stuff
Install_Tsk.exe >>> This Installs all the “Default_” Files
Setup.exe >>> This allows for Selection of the “Operator Settings”
These are the “Settings” which is not needed at least in the GULF STATES
KPN_Nederland.CAB
MTN_SouthAfrica.CAB
O2_UK_Contract.CAB
O2_UK_PAYG.CAB
Optus_Settings.CAB
Orange_Nederland.CAB
Orange_UK_Contract.CAB
Orange_UK_PAYG.CAB
T-Mobile_Nederland.CAB
T-Mobile_UK.CAB
Telfort_Nederland.CAB
TelstraClear_NZ.CAB
Telstra_Australia.CAB
Virgin_UK.CAB
Vodacom_SA_WAP1.2.CAB
Vodacom_SA_WAP2.0.CAB
Vodafone_AU.CAB
Vodafone_Nederland.CAB
Vodafone_NZ.CAB
Vodafone_UK_Contract.CAB
Vodafone_UK_PAYT.CA
I made a copy of all of the above to an SD card BEFORE DOING ANYTHING else (NoBackUp…learned his lesson……Harry Potter !!!)
So I Reduced my ER to Just
Autorun.exe
Default_Backgammon_PPC_IMAM001.CAB
Default_CAB-shortcut-CDL-08Sep05.CAB
Default_cdl_wwe_version.cab
Default_ie_view.sa.cab
Default_Imate_PPC_SA_V5.5.03.cab
Default_SkypeForPocketPCnonxScale.CAB
Install_Tsk.exe
Setup.exe
How just simply Delete !!!
Don’t forget to hard reset let the imate setup run (will not only install the stuff you did not delete) and try out your new toy.
Click to expand...
Click to collapse
dannyoneill thanks heaps,
deleting those to files worked a treat
thanks again
t0ne
Poll for sticking this 3d!
THANKS !!!
..._
P.S.: may I install basic stuff to the ExtROM while it's hidden ?
Or, if I need to unhide it, install, then re-hide, will such software still playable ?
I mean for example:
- Total commander itself
- Resco explorer
- Storage tools
- Sprite Backup
- and so on...
Is it a strange idea ?
Thanks again for this illuminating thread.
You can unlock and install things no problem, not done it myself, done know if they will still be usable after its re-hidden i would think not.
The extended rom is reserved so empty or not its not going to give you more ram or rom storage at all. The best thing to do is unlock it and use it for storage. The annoying thing is if you hard reset you then have to re-unlock it.
t0ne said:
dannyoneill thanks heaps,
deleting those to files worked a treat
Click to expand...
Click to collapse
BTW, on the i-mate website's JAMin support pages, you will find specific operator settings for Optus in a downloadable CAB file, which will setup the wireless settings for your device.

regarding the extrom...

hello everyone!
i am running wm06 for a while now and have to admit, its fckng great!
i upgraded from wm2003 directly to wm06, so its like two different worlds...
but when i was upgrading, i did not manage to merge the extrom with the rest of the storage, the unhide and unlock thing just didn't work!
but as i am now sure, that i wont need to roll back to 2003 again, merging the extrom with the rest of the storage would only make it better, no disadvantages, am i right?
or am i needing the extrom in wm06?
how is it used in wm06?
or is it just wasted space....?
as u can easily see, i am still a little confused about all that....
here are some specs from my device:
ROM Version: 5.60.00 WWE
ROM Date: 03/02/05
Radio Version: 1.15.00
Protocol Version: 1337.45
ExtROM Version: - (nothing here...??? is that bad??)
STORAGE:
total: 42,92MB
in use: 28,26MB
free: 14,66MB
PROGRAM:
total: 109,12MB
in use: 40,23MB
free: 68,90MB
thx for any help,
regards,
krz
ExtROM: Extended ROM - is the section of the ROM which the distributor of the phone (eg O2, T-Mobile, iMate, etc) store their customization (eg Today theme, ring tones, extra software) data.
In WM2003 you may found your phone having hardreset quite often - thats because WM2003 use RAM as program-storage (RAM lose everything when battery is drained)
In WM5/6 you are not using RAM as a storage anymore thus not performing hardreset often (typically once during flash)
By performing ExtROM merge, you're going to have extra MB in storage. There is NO DISADVANTAGE.
Those who prefer to have an ExtROM for whatever reason (they may HardReset their phone quite often because of testing/developing/whatever) place the "ExtROM" folder in Storage Card (Memory card/SD/MMC) and after HR it gets installed as usual. Or you can install fixes and addons "one by one".
Read more information here : http://wiki.xda-developers.com/index.php?pagename=BA_ERK_Understand
----
To sum it up :
You dont need to merge your ExtROM (it cost you some MB)
* How to merge / is here : http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
thx a lot for your answer, kerio...!!
if i understood you right, the EXTROM is of NO USE at all in WM06.
so if not merged before upgrading, it will be just invisible and unused space.... am i right?
if so, i would of course prefer to merge the EXTROM with the rest of the storage to gain more free megabytes....
will the total storage size be 60,3MB after merging, like i have seen in this thread: http://forum.xda-developers.com/showthread.php?t=326515 ?!?
is it possible to merge the EXTROM after having WM06 installed?
can i merge EXTROM without reinstalling WM06 and all programs?
btw: unhiding and unlocking is NOT working on my device....
when clicking UNHIDE, nothing happens,
when clicking UNLOCK i get the following error:
Code:
ERROR: FL_IOCTL_BDTL_HW_PROTECTION - The parameter is incorrect.
what am i doing wrong??
i know, that are a lot of questions, but i would be very thankful if someone could help me with that...
thx in advance!
regards,
krz
bump bump
I would also be interested if somebody suuggests new solutions for "big storage" as my device does accept unlock and unhide, but when using "repart_DOC.exe" it gives me errors and eosn't repartition the ROM...
Downgrade to WM2003 , play da game and flash to wm6
Xeon's got the idea. You will need to to downgrade to WM2003, unlock, unhide and repartition the extrom. Once complete then flash up to the WM6.
I had to do the same thing, as I had not correctly repartitioned the extrom when I moved up too WM5. Good luck.
hello and thx a lot for all your ansers!
how many MBs will I gain from merging EXTROM?
and is there a way to use that space without merging?
anyone knows??
i have wm2003 and i can't unhide , unlock, or format doc, cos everytime i'm trying i can see , FL_IOCTL_BDTL_HW_PROTECTION the parameter is incorrect, can anyone help me?
Nicolfa said:
Xeon's got the idea. You will need to to downgrade to WM2003, unlock, unhide and repartition the extrom. Once complete then flash up to the WM6.
I had to do the same thing, as I had not correctly repartitioned the extrom when I moved up too WM5. Good luck.
Click to expand...
Click to collapse
We got the point now.
Advise the wiki should be revised as so many people are confusing about the ExtROM.
Thanks
Dear tangwd898,
lol
Have you ever read the wiki? Could you give me the parts where "you must revert back to WM2003" is missing?
kerio said:
Dear tangwd898,
lol
Have you ever read the wiki? Could you give me the parts where "you must revert back to WM2003" is missing?
Click to expand...
Click to collapse
Dear kerio,
I did read the Wiki regarding the ExtROM for more than 3 three times, I can't get any informations that we can't modify the ExtROM in OS wm5.0 or wm6.0 from the thread - Understanding the Blue Angle Extended ROM:-
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_Understand
Understanding the Blue Angle Extended ROM
The Extended ROM is shipped as ms_.nbf and loaded with the BaUpgradeUt.exe
The ms_.nbf is extracted during the Upgrade and written to folder \Extended_Rom
The \Extended_Rom folder is hidden and read only
The Extended ROM can un hidden with the following tool Unlock tool
The Extended ROM is limited to 16MB in size
The Numbering of the Extended ROM is operator dependent:
Thus a QTEK version 1.22.225 might or might not have higher patches than a I-Mate version 1.22.62
Extended ROMs are built around the major OS release (1.22, 1.31)
It is NOT advisable to install cabs from a Extended ROM if the Windows Mobile 2003 Version are not the same
It is NOT advisable to install patches if the CE versions (1.22, 1.31) are different.
(They might have already been included in that CE version.)
Execution of the Extended ROM
CheckAutorun.exe (which is started from \Windows\Startup\CheckAutorun.lnk) executes the AutoRun.exe
AutoRun.exe is found in the \Extended_Rom Folder
AutoRun.exe reads the \Extended_Rom\Config.txt and executes the commnands in that file
The pointer for AutoRun.exe HKEY_LOCAL_MACHINE\Comm\AutoRun is set to \Extended_ROM\AutoRun
The pointer for Config.txt HKEY_LOCAL_MACHINE\Comm\AutoRunCFG is set to \Extended_ROM\AutoRunCFG
The Touch screen is disabled by the first command (TPDisable.exe)in the Config.txt
The Touch screen is enabled by the 2nd to last command (TPEnable.exe)in the Config.txt
The last Command of the config.txt (RST) performs a soft reset
Content of the Extended ROM
The Extended ROM consists of System files (TPDisable.exe, TPEnable.exe, AutoRun.exe, Config.txt)
The Extended ROM consists of *.CAB installation files
The installation files fall into the following types
Applications: Album, Fax, Zip
Patches for the Hardware: Button9 on the Hardware Keyboard
Patches for the software: Blue tooth upgrade
Provider specific files and programs: Splash screen, Internet Explorer defaults, telco settings, etc.
Effects of a Hard Reset
A Hard Reset will NOT re-extract the ms_.nbf
A Hard Reset will reload the contents of the \Extended_Rom folder
A Hard Reset will reload the OS and thus also clean the registry
Why is this of interest to me?
The Extended ROM can be cooked (Customize the ROM to your own liking)
What ever you put in the \Extended_Rom folder will remain even after a Hard Reset
The \Storage will not be overwritten on a Hard Reset
Thus one is able to keep CAB files on \Storage for automatic reinstallation after a Hard Reset
You can keep your "customized" Extended ROM and only perform a OS or Radio Upgrade
Click to expand...
Click to collapse
"you must revert back to WM2003" - may be found at other threads but i think this thread "Understanding the Blue Angle Extended ROM" should include this message.
Thank you.
I dont think so
When performing upgrade you should follow the instruction (WM5 and WM6 pages) when you dont - then you may find yourself in trouble.
1. The main page is only for WM2003
2. Error message -> google -> sollution (30sec)
3. You can add it to the wiki (anyone can)
Effects of a Hard Reset
A Hard Reset will NOT re-extract the ms_.nbf
A Hard Reset will reload the contents of the \Extended_Rom folder
A Hard Reset will reload the OS and thus also clean the registry
Why is this of interest to me?
The Extended ROM can be cooked (Customize the ROM to your own liking)
What ever you put in the \Extended_Rom folder will remain even after a Hard Reset The \Storage will not be overwritten on a Hard Reset
Thus one is able to keep CAB files on \Storage for automatic reinstallation after a Hard Reset
You can keep your "customized" Extended ROM and only perform a OS or Radio Upgrade
Click to expand...
Click to collapse
I still have some questions:-
- Why my *.cab files in the extROM folder all missing after i done a hard Reset?
- How to keep all *.cab files in the ExtROM folder after the hard reset?
Thank you.
Guys and Gals
The BA Wiki was started over 2 years or more ago by a new guy on the forum who trying to work out how to get his German MDAIII flashed with an English rom.
He wrote it in order that the information was found in one place as he found it hard to find it in all the threads, this finding problem is still true today.
Well as you see times have changed and the porblems of WM5 and WM6 were not know at that time and as you also see not many people have bothered to invest time back into documneting in wiki. Its become more of a get and ***** about wiki not being updated than a give back some of the time in searching the threads and update wiki for the next person.
Some were in the begining it says if you don't like what you read then fix it.
This is best done by those people that are going through the learning curve as they read Wiki and they should beable to correct / add / embelish on what is written and what needs to be said.
Its a thought.
tangwd898 said:
I still have some questions:-
- Why my *.cab files in the extROM folder all missing after i done a hard Reset?
- How to keep all *.cab files in the ExtROM folder after the hard reset?
Thank you.
Click to expand...
Click to collapse
Misson impossible is that type of Cab file that is no longer there after a hard reset (or when they are executed) as they delete themselves.
Change the properties to read only will solve that.
Check out the kitchen
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_Things2know

Categories

Resources