DeviceData.txt needed for Imate Jam - JAM, MDA Compact, S100 General

I need the Device data.txt file from windows that you get after running GetDeviceData. Upgrade changed my operator ID so I am no longer able to upgrade without country code errors. Help Please. Or if someone is familiar with how to change to operator ID back to CDL on the device itself, your help would be appreciated.

Related

sos

Dear All,
Is it possible to unlock the SIM on universal
Is tit possible to change the language on the phone from french to English
Can you please guide me on how to do the above as I dont speak french
Is it possible to save the current settings on the phone if the above fails
as the operator sayzs that the warrantz on the phone is void if the language is changed or the SIM is unlocked
My current configuration
operatpor 7.113.5.132
Rom version 1.13.51 FRE
Rom Date 22-09-2005
Radio 1.03.00
Protocol Version 42.36.P8
Ext rom 1.13.132 FRE
I can help you change language from french to english.
Doesn't your Universal have a place where you can download the french ROM? If not, it is still possible to backup the french ROM. A little complicated, but i'm sure i can walk you thru the process.
Regarding the unlocking, i don't think it is possible at the moments. The geniuses are working on it but as of now, you can have it unlocked thru your provider. Just pay the fee (which i think is around 20-30€)
Dear Jorgee,
I would appreciatte if you can walk me htrough the language change, I have tried the provider which is orange switherland, that the lock is definite
A Bellah
First step is to tell me which ROM you would like? O2, Qtek, Imate or T-Mobile?
and i assume you would like it in english?
Just tell me what ROM you need and i will walk you thru it
Dear Jorge
My current configuration
operatpor 7.113.5.132
Rom version 1.13.51 FRE
Rom Date 22-09-2005
Radio 1.03.00
Protocol Version 42.36.P8
Ext rom 1.13.132 FRE
and I want to change into english
Which of the following ROM's would you like?
O2
QTEK
IMATE
Take note, flashing the ROM/Changing the language doesnt get rid of the SIM Lock
Dear Jorge,
Which ever you think is best out of all the three you have listed.
ANother question if I may, Would this affect the phone configurations by orange
Thanks
abellah30 said:
Dear Jorge,
Which ever you think is best out of all the three you have listed.
ANother question if I may, Would this affect the phone configurations by orange
Thanks
Click to expand...
Click to collapse
I guess if you want the fastest or newest? The fastest in MY opinion is the QTEK because it has few customizations. The newest I believe is O2 ROM
Regarding Phone configurations of Orange, the configurations are set thru a .CAB file which is stored in Extended ROM. All you have to do before changing ROM is to backup the extended ROM, then Flash the device to english, then run the CAB file that has the Orange customizations.
If you can give me a list of the files in your Extended ROM, i'll do my best to explain what each file does
Dear Jorge,
I guess I will use the same as youy which I thinkl would be the qtek.
Ok where do i get the programme to back upo the extended rom
Thanks
Backing up extended rom, have to install Total Commander. Then in total commander, type \EXTENDED_ROM which will show you the contents of the extended ROM. Just copy to the SD card and save in your computer, that's how you backup extended ROM
For backing up the OS ROM, refer to this thread as it was BUZZ that helped me find out what to do.
Its : http://www.buzzdev.net/index.php?op...=view&id=8573&catid=33&limit=15&limitstart=15
Just download the file at the bottom of this page (page 2) then continue on to page 3 and 4 which explains how to do it. Just PM me regarding where you are already and I will walk you thru the rest as I have already done the procedure
Hello Jorgee,
I got to this stage and created the file on the desktop but I tried to run the command in dos but I got an error message
Where can I download the qtek rom from
Thanks
A.Bellah
abellah30 said:
Hello Jorgee,
I got to this stage and created the file on the desktop but I tried to run the command in dos but I got an error message
Where can I download the qtek rom from
Thanks
A.Bellah
Click to expand...
Click to collapse
What command did you enter that caused you to get an error message?
go here ftp://xda:xdaftp.xda-developers.com/Uploads/Universal/Shipped ROMs and download UNI_Qtek_WWE_11364_151_10300_Ship.exe for the English ROM.
are you sure you don't want to backup your ROM first?
Just drop me a message if you get lost.
dos command
i want to back it up first but I am getting the folowing error on the dos command
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\> pdocread 0x0 0x3FA0000 QTEK.RAW
'pdocread' is not recognized as an internal or external command,
operable program or batch file.
Did you install EnableRapi on the PPC first before doing this?
THen you have to disable the USB connect option of ActiveSync,
Then enter Bootloader mode on yor universal,
then connect it to the computer,
then run the pdocread
is this what you did?
no I followed the articel your refered me to, I ran the enable rapi, then connected to the usb and then ran the programme.
I also tryed to download the qtek system but the link you gave me does not let me acess the site
you have to put xda:xda in the link as this is the username and password. Or use an ftp program to access the site, this might be easier
I put it in the bootloader state and still the same message
I put it in the bootloader state and still the same message, but the message on the article you refered me toi says not to do so, I have tried both methods and cantr seem to be able to get it done
Sorry, but i don't know what to say. Are you using the original cable?
Re: [AOSPA 4.2.2 JDQ39] PARANOIDANDROID 3.1 (Mar07 RE-UP) | PIE QS-TOGGLE, Bat %
Jorgee said:
First step is to tell me which ROM you would like? O2, Qtek, Imate or T-Mobile?
and i assume you would like it in english?
Just tell me what ROM you need and i will walk you thru it
Click to expand...
Click to collapse
Did you do a clean install and latest gapps?
Sent from my Nexus 4

need help after probably bad flashing

Hi. I had got T-Mobile MDA with german language. I upgraded it with downloaded file (4.01.16 ENG). After upgraded I can't synchronize my MDA with PC. Normally I can explore what is included in it but I can't upgrade it next tim at all. When I try open exe file in window appear: "ERROR: GetDeviceData - An existing connection was forcibly closed by the remote
host. error getting devicedata". Then I hope, that I can upgrade it by XDAtools. After few minutes my MDA dont see my SD Card at all? I don't know what should I do ? Help help help !
The reason is your T-Mobile ROM, which prohibits flashing via exe file.
To get rid of this problem you must install ROM other than t-mobile via SD card.
spq: will You be so kind as to take a conversation with me? maybe thrugh a gadu-gadu ?
So ok. My gg number is 2968461. I'll be available c.a. 21:30 GMT+1

Experts pls. Urgent Help

i have (ORANGE) spv M1000
LOCKED From COGNITO :roll:
i am trying to unlock phone
and trying UPDATE rom
m1000 rom download from 02 web site and trying update but saying mesage Country ID ERORR
before post this problem then reply
http://forum.xda-developers.com/viewtopic.php?t=40576
i am read Rely and How to Solve Country ID ERORR
3: Copy the HimaGetDeviceData.exe file to any folder on your device.
my pocket pc LOCKED Cognito and not ENTER desktop ...file manager etc...HOW to COPY HimaGetDeviceData.exe and HOW to RUN this file ......Main Problem ENTER this PDA
.........
i hope members help me
pls. urgent help
thanx
br
[email protected]
Still not Reply any members ...pls HELP
you already tried: bootloader mode + another rom?!?
i solved a problem once like that...
yes ...but i have still problem....country ID erorr
Since Cognito only ships devices locked like this for companies field staff to use, I assume you are either a field engineer or tech support at one of these companies. If you have a legitimate need to unlock the device, get the appropriate person at your company to contact Cognito and they will unlock it for you, though you may have to ship it back to them.
If you've bought the device from someone you met down the pub, they probably didn't have the right to sell it... :?

Error getting connection type

I recently downloaded WM2003 on my sx56 and was working good, but when i would use the internet it was way to slow. I decided to upgrade and accidentally installed ROM version 4.01.16 and all my settings changed to TMobile. Now my question is: I want to cook WM2003 SE again but when I do the DOS window tells me there has been an (ERROR: Get Connection Type - An excisting connection was forcibly closed by the remote host). Can someone please help with this issue please.
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Still need some assistance
I followed the instructions but where do i get the Source from. Do i have to download a ROM.
http://www.romkitchen.de/
I Cant still downgrade my system. Can Someone help please
Can someone please tell me what to do because i already downloaded software and ROM and I still can downgrade to v.5.15. I tried everything but i cant seem to find files ending in .nb. Where do i find this files can someone please help. And if I get them what do i do, and how do i download them to my phone.
nb* files are in the downloaded ROMs. Just unzip the downloaded ROMfile and you will have it....
Stefan
Thank You
Thanks It really worked, I really really appreciate everything you guys do, and all the information given. Once again thanks.

Hay I need som help

My PPC Universal Jas Jar and I Put new rom 6.5 But i have
Broblem if i Open Blutoothe I make Beem File is recive all file an Blutoothe is Visiabel But I cant resive any Massige by another device.
in another Device is told Service problem. and if i need Change Blutoothe name I go to Oner Information and I put my name but if any Mobile serche it com Name: Imate only ( He didien change In my name)>
What is problem please Help.
I can send file with Blue tooth but nothing to receive from other device
have a look here:
http://forum.xda-developers.com/showthread.php?t=549207
Hope this helps,

Categories

Resources