Related
Hi all,
Could someone please tell me why I can connet to my wireless network at home, but I can't view any web pages or download any emails on my XDA II!!
Any help would be greatly recieved!!
Cheers Guys
Works fine for me mate..
Things to check.
1) XDAII Has an ip address assigned to it within the correct subnet for your home wifi.
2) XDAII Has the correct default gateway configured which will either be your wireless access router, or another type of router you have that provides internet access.
3) That your XDAII can see the network available to it through the start, setting, connections, connections, advanced, network card bit. Make sure that you actually tell it to connect to your network too. If you can't see it and you are sure the wifi card is installed ok, make sure that you have enabled SSID broadcast on your WAP.
Let us know how you get on.
Rgds,
Rob.
rob,
what do you mean, "make sure you have sidd enabled on you wap" ??
i have beeb trying to get this to work for days..
lmk m8
Zetex
He means..
He means that your Wireless accesspoint should have broadcast SSID enabled. If you have not intentionaly disabled it, it is most likely that it is enabled and thus not the issue. Is your wireless WEP encrypted? If it is, did the Pocketpc ask you specifically for the WEP encryption key when it found your network?
- Johan
Bizmarty said:
Hi all,
Could someone please tell me why I can connet to my wireless network at home, but I can't view any web pages or download any emails on my XDA II!!
Any help would be greatly recieved!!
Cheers Guys
Click to expand...
Click to collapse
----------------------------------
I am using a XDA II. Having received a faulty 'backpack', now replaced, I am still trying to get it to connect through a Sandisk CF Wi-Fi card to a D-Link 900+ AP hanging off an Intel router and my Linux server. In desperation I connected the CF card through a PCMICA adaptor into my notebook. After tweaking the 900+ AP (using v. 2.61 firmware), I found that it liked 64kb WEP, SSID on, Channel 11, Infrastructure (not Ad Hoc), and left on fully automatic so D-Link 650 Wi-Fi card in my notebook runs at 22 Mbps, and the Sandisk card at 11 Mbps.
But does it run in the XDA II you ask? Nope! I think that Sandisk's software leaves a lot to be desired. I am using vxIPConfig and vxUtil tools to see what is what ... but to no effect. I would gladly flick the Sandisk card now I know their software is lacking.
Any clues from other users?
Driving me nuts
Sorry not to actually come up with answers, but I thought you might gather some comfort from the fact that my XDA II/Sandisk combo is driving me nuts too. You are not alone....!
First thing I did was remove the pre-installed Socket wifi s/w and install the Sandisk stuff, but although my XDA can happily see my network, it will not log on no matter what I seem to do.
Am going to review some of the other helpful posts here and try the tips and will report back......!
SMW1
Re: Driving me nuts
SMW1 said:
... but although my XDA can happily see my network, it will not log on no matter what I seem to do.
Click to expand...
Click to collapse
The CD-ROM that came with mine seems to have been designed for WinCE, and not Mobile Windows 2003 for the PPC. As a result I cannot get rid of the Sandisk 128M+WiFi CompactFlash Card settings from the 'Configure Network Adaptors' area. I have to go in via my PC and ActiveSync (3.7) and rename the two offending .dll files before the CD-ROM software removes the drivers. I manually delete the renamed .dll.old files from the XDA II.
Sandisk seem pretty useless. I let them know of these problems and the link they gave me was to the straight wireless LAN card ... That didn't work, so go figure!
I am told the Sockets drivers out of the UK are better (for basically the same card), however, their FTP site does not work .. some say it hasn't worked since April 2004. More useless information, except that their docs. leave Sandisk for dead!
I keep wondering what the so-called 'Zero Configuration' tools that are supposed to be part of Mobile Windows 2003 actually do? I just can't see why the Sandisk card works with my D-Link DWL-900AP+ (802.11b/g) and with my ancient Airport access points on my notebook, but not on the XDA II on the rare occasions that I get the blinking green light (very rare and I don't know why???). <sigh!>
simple enough i cant connect to my home wifi using my wizard.
It is able to find the network, and says it is "available" but when i press connect it goes ... "connecting" and then returns to "available"
Ive read through most threads on this forum and no one seems to have this problem, i have changed to power setting to best performance as well.
However i dont know what to put in the Enrole tab...? this is porbably the source of my problem.
please help me!
Hi, The problem could be the speed of your router connection. Set it to be able to connect to b end g clients.
In my case this worked. I Had the same problem you descibed, so give it a try!
Gert-Jan
thanks for the suggestion, but im running three computers over this wifi network already, and two have "g" wifi cards and one has a "b" card. so i dont think this is my problem.
jimmy_boy said:
thanks for the suggestion, but im running three computers over this wifi network already, and two have "g" wifi cards and one has a "b" card. so i dont think this is my problem.
Click to expand...
Click to collapse
My first problem was forgetting I'd got MAC filtering active on the AP. Once I'd added the Wizard's mac address things got better.
What encryption are you running?
Dox
Exact same problem as you jimmy_boy.
Quite frustrating not being able to connect to the wireless network.
I am wondering if it is a rom-specific problem...I am using an O2 XDA mini S, on vodafone. Would this cause the wifi to lock up?
Unsure as what to try next. If someone could shed some light on the situation it would be much appreciated.
Exact same problem as you jimmy_boy.
Quite frustrating not being able to connect to the wireless network.
I am wondering if it is a rom-specific problem...I am using an O2 XDA mini S, on vodafone. Would this cause the wifi to lock up?
Unsure as what to try next. If someone could shed some light on the situation it would be much appreciated.
gdap said:
I am wondering if it is a rom-specific problem...I am using an O2 XDA mini S, on vodafone. Would this cause the wifi to lock up?
Click to expand...
Click to collapse
Shouldn't do, I've got the same setup here and WiFi is fine.
gdap said:
Unsure as what to try next. If someone could shed some light on the situation it would be much appreciated.
Click to expand...
Click to collapse
If I have the power on anything but Best Performance, I get flakey throughput, even right on top of the AP. Both my laptop and iPAQ hx4700 will find the AP from all corners of the house, whereas the Wizards both want better signal strength before they'll connect.
Like I asked jimmy_boy, what encryption are you running?
Regards
Dox
I also experienced this problem and what I did to fix it was, changing the channel on my access point. I stepped through each channel stopping and trying it until I found a channel that worked.
I turned the encryption off. If I goto "Network adapters" it shows the name of my connection and "available", but when I goto "wireless lan" tab, it shows me no information on the connection at all.
Tried setting the power setting to max as well. Still nothing.
Would appreciate it, if someone could step by step explain how to do this.
thanks in advance.
I also have the exact same problem as described in the first post. I do have MAC filtering on, but I've also added the MAC of my Wizard.
I haven't tried changing the channel though...
yeah gdap thats exactly what i get, im running WEP encryption, but ive entered the network key into the wizard as well, i know this is correct, becasue i entered it in wrong on purpose to see if there is an error message and there is. So it knows the network key the network is available yet it stil wont connect!!!!!
Any ideas??
im running the uk t-mobile rom so i dont think its the roms problem.
changing the channel of all 4 computers ... oh the effort
but i might give it a shot
Same problem here
I can connect with my Exec, but not with my gf's Wizard. Same symptoms. It says the network is available if I get the key right, but then won't connect. Please help!
My Qtek 9100 can connect to my encrypted 802.11b AP, get's a valid IP address from the DHCP server, but is not able to communicate with TCP/IP. Also the other members of the wireless LAN can not see my Qtek nor is PING responding. PWLAN from Swisscom here in Switzerland is working well, the login page is showing up.
ch475
ch475 said:
My Qtek 9100 can connect to my encrypted 802.11b AP, get's a valid IP address from the DHCP server, but is not able to communicate with TCP/IP. Also the other members of the wireless LAN can not see my Qtek nor is PING responding. PWLAN from Swisscom here in Switzerland is working well, the login page is showing up.
ch475
Click to expand...
Click to collapse
I get the same issue: my 9100 connects to my router and receives a valid IP address. Even though the IP Address/Subnet Mask are valid, I cannot seem to get any access to the internet via wifi. I find this very frustrating, so if anyone has any suggestions, I'd appreciate it very much.
Exact same problem myself, but I think I only have my router set at 'G', where the o2 Mini is 'b' only.
Connected to both of my Morrisons supermarkets wireless network tho,they're both on 'b'........ no encryption in either of them.
problem solved!!!!!
stupidly i forgot to add the MAC address of my wizard :shock:
thanks for the help Dox
jimmy_boy said:
problem solved!!!!!
stupidly i forgot to add the MAC address of my wizard :shock:
thanks for the help Dox
Click to expand...
Click to collapse
Please explain
Check on the setup page on your router that MAC address filtering is not enabled. If it is you will need to add the MAC address of your Wizard's Wlan card in order to connect.
Often forgotten but excellent security feature is MAC address filtering
Sorted, as I thought, I had to set router to transmi b as well as g
No need to flash the Rom now :twisted:
SantfeKuss said:
jimmy_boy said:
problem solved!!!!!
stupidly i forgot to add the MAC address of my wizard :shock:
thanks for the help Dox
Click to expand...
Click to collapse
Please explain
Click to expand...
Click to collapse
On your wifi router settings on your computer, you have to add the MAC address of the wizard, which can be found by , settings, advanced tab on your wizard.
Hi!
I have a huge problem, with my tytn HTC
I have a wireles network at home. It is built like this:
Cable modem --> (not wireless)Router--> computer (conected to the router via UTP cable, that means with ordinary network adapter card).
In this computer, i have WIRELESS USB card, configured as Access point (AP), so the wireless networks works just fine. With my laptop i can connect to internet through this card with no problem at all...
But, when i try to connect to internet with my TyTN, it just won't work... it finds wireless network, it sais it is available, but when i try to connect, nothing happens. it sais "connecting" and than- nothing happens... after several tries, it sais that my wireless network is unavailable... when i reset my Tynt, it sais it is available again, but the same story again...after several attempts to connect to wireless network, it sais unavailable and that's it...
What is wrong? i tried everything, im quite desspered here...
Well, tnx in advance for any suggestions and advices...
I appologise for my bad english, too...
TNX!
Do you have any restrictions in your Acess point configuration? If yo have, just remove it or reconfigure for acess with your TyTN. Try to remove WEP or MAC filtering or firewall...
Resolving your wireless problems ...
There's actually several things you need to check.
First, on the Router side, insure that you are not restricting your wireless access. For instance, is your Router set to G Only or is it b/g?
Next, on your router side, make sure your router is not hidden. If so, then you'll need to manually add the router via Configure Wireless Networks on your TyTN. At the top is "Add New...". Choose this and insert your settings for your wireless router.
On the TyTN (HTC Hermes) side of things, you need to see if you are set to be B only or if you've upgraded (I think most ROMs on this site have this fix installed) and your device is seen as a G device and therefore can connect to G only devices.
These should hopefully resolve your issues.
i removed restrictions and firewall and still nothing...
Next thing, my wireless Access Point is set to 54g Auto.
On my Tynt i have installed Windows mobile 6 profesional, CE OS 5.2.1437 (build 17944.0.3.1)
I don't know exactly where should i look if my HTC is wireless is B or G...
I tried to change settings on my AP from 54g Auto to 802.11B and to to 802.11G and vice versa, but still nothing...
As i wrote before, i don't have wireless router i just have an ordinary router and then wireless USB card in one of the computers, so i can connect with my laptop to internet over this card. With laptop it works excelent.
So, can anyone suggest what kind of OS should i install on my HTC in order to fix this, and where can i get one?
TNX for so far, and TNX in advance for any further information or suggestion!
Still having problems...i tried everything...
i tried to connect to wireless network at friend's wireless router...TyNT found a signal, everything was just fine, then asked me for key (friend has WEP protection), i typed the password, and then i couldn't connect again...
I havo no clue whatsoever anymore...
Anyone with same problem?? Any suggestions?
Tnx in advance for any advice...
hmm...
I guess it is a hardware problem with my tynt's WI-FI...i can't think of anything else... i tried everything, still can not connect...
Im getting quite desspered with this HTC... i guess i'll sell it and buy NOKIA N95 or something like that...
well, if someone by any chance know where the problem is, i thanks in advance for every advice or suggestion
TNX
tytn wireless
I have nothing to contribute as we have similar problems. I have learned from other users that development team from Htc is preparing a patch which will be released in two months time. Let's wait for it then.
wifi
same problem here ...
I have tried to flash older radio didn't help ...
I have tried disable wep on my router ... didn't help
I'm just in a loop of AVAILABLE-->CONNECTING-->AVAILABLE etc.
please if someone finds a solution (patch) for this problem post it to this thread.
still there?
lithocan said:
I have nothing to contribute as we have similar problems. I have learned from other users that development team from Htc is preparing a patch which will be released in two months time. Let's wait for it then.
Click to expand...
Click to collapse
Hi!
I'm just wondering are there any solutions been found?
Or it's definitely hardware problem?
WBR!
problem
so Ive found my problem ....
Ive upgraded firmware in my router to newest version and problem appeared.
When I've removed encryption wpa2 and set my router to no encryption my wifi worked again.
So I've bought different wifi router and I've no problems now.
So anyone who is having dead wifi in hermes try to deactivate wifi encryption and try a different router (friends house or public wifi hotspot)
pischk said:
There's actually several things you need to check.
First, on the Router side, insure that you are not restricting your wireless access. For instance, is your Router set to G Only or is it b/g?
Next, on your router side, make sure your router is not hidden. If so, then you'll need to manually add the router via Configure Wireless Networks on your TyTN. At the top is "Add New...". Choose this and insert your settings for your wireless router.
On the TyTN (HTC Hermes) side of things, you need to see if you are set to be B only or if you've upgraded (I think most ROMs on this site have this fix installed) and your device is seen as a G device and therefore can connect to G only devices.
These should hopefully resolve your issues.
Click to expand...
Click to collapse
Recently bought my wife one of these devices and just spent two whole days looking for a solution and that was it.. mixed mode - I had mine set to "G" only! Sometimes the solution is too simple for the geek to be able to spot I guess - maybe the wife would have found it faster!
Thanks for the solution.. as with all forums I always suggest a FAQ with these solutions or links to the threads/posts with these tips and resolutions.
kralcak said:
so Ive found my problem ....
Ive upgraded firmware in my router to newest version and problem appeared.
When I've removed encryption wpa2 and set my router to no encryption my wifi worked again.
So I've bought different wifi router and I've no problems now.
So anyone who is having dead wifi in hermes try to deactivate wifi encryption and try a different router (friends house or public wifi hotspot)
Click to expand...
Click to collapse
Lucky... Mine did not connect anymore, flashed black majik over schaps3.6 and voilla! worked again... without touching the router.... Will try last schaps tonight.... I´m tired of flashing and reinstalling....
Please help, ive had my hd2 for a few days now and have had nothing but problems, might just give it back!
It picks up my home router but simplify wont connect, it just displays a small rotating circle likes it working but nothings happening.
When i remove the settings and retype the key code it keeps saying incorrect code but it isnt,
Anyone any ideas, can i some how reset the wifi settings, its taken me a few days to customize the phone so i dont really want to do a hardwear reset. Ive already a software restset.
Bloody htc!
What protocal are you using on your router? WPA, WEP?
Oh if your using an older Belkin router, I know of about 3-4 models that used to have trouble with WinMo, an update Router flash fixes it though.
Give us some more info on your router etc and Im sure we can help though
Sure your using the right password/key? if it says its wrongs it is probably wrong lol. Maybe try changing it to a more basic password as a test? like "password" and see if it can get connect.
knightrider66 said:
Please help, ive had my hd2 for a few days now and have had nothing but problems, might just give it back!
It picks up my home router but simplify wont connect, it just displays a small rotating circle likes it working but nothings happening.
When i remove the settings and retype the key code it keeps saying incorrect code but it isnt,
Anyone any ideas, can i some how reset the wifi settings, its taken me a few days to customize the phone so i dont really want to do a hardwear reset. Ive already a software restset.
Bloody htc!
Click to expand...
Click to collapse
Hi
Calm down. Give some information about your router and the type of security You use.
try these
1. Reset the router once
2. If you use MAc access list on the router then add your device's MAC to the list.
3. If you use N router then in the settings untick N mode protection.
Give more details about the third party software on the hd2 using radios (eg: tomtom, igo,gpstuner like these)
Good luck
HI guys thanks for helping out.
Obvious first - yes the key code is correct i use it on my laptop and iphone.
security mode says WAP-PSK/WPA2-PSK. Its a siemens ive been on the ip server addres and cant see any issues, im on my laptop using the wifi now and its working perfet.
Ive tried everything, changing passwords, settings both on the router and on the phone.
The hd2 is full of really stupid bugs!
Try to hardreset the PPC.
If it won't work, try to update your ROM to the latest available.
If it doesn't want to work, then try to connect to another WiFi without password and see the connection is successful.
If it works with an unprotected WiFi, try to connect to a different router but with protected WiFi.
If it works, then there is a problem with your router and I suggest to update your router's firmware.
funny wifi
the problem wit my hd2 is most of the time it shows wifi connected but i cant surf the internet and sometimes out of the blues it connects to the internet,cant figure out wats happening....
HI kholk, thanks for the help, ill work my way through it and hopefully get it sorted!
knightrider66 said:
HI kholk, thanks for the help, ill work my way through it and hopefully get it sorted!
Click to expand...
Click to collapse
Have you found the solution? I can help you my friend i had the same situation
I tried to connect yesterday my hd2 with my router. First it wasnt working aswell. Then i set the next things. Channel 9 (was auto), Encryption AES (was tkip and AES). Network mode is Mixed. Further have you installed Mac Filter? I installed this also. So if i have a connection thats it. I must fill in my macadres from my phone for i get fully connected.
Hi guys thanks all for you help call HTC UK support and their amazing advice was to do a full hard reset!
I really am having a lot of problems with this phone and i cant understand why their have been so many issues?!
Hi guys,
I have the same problem- HD2 shows it is connected, but no access to Internet(other- laptop, SE990 phone is connected and working OK)
For not to write about all, now situation is:
1. On router wrt54g2 temporary disabled wireless security, only mac filtering is on(laptop mac, SE mac, HD2 mac is allowed), router firmware is up to date
2.HD2 is like new after hard reset, no settings is done for connection to home network. HD2 wifi is on, looking for access points and connecting to only one available open network in my area- to my home network and shows it is connected but no access to Internet.
3. In router I can see all connected clients by mac. All 3(lap, SE, HD2) are connected. I use Network Magic software too but it is showing only my laptop and desktop are connected. SE is not connected according NM, but it is working OK.
P.S.
Do not know what else can help you in my problem(maybe some other router setting, but as other devices are connected without problems so maybe it is not important for now)
So only my HD2 can not access WWW
Can You guys help somehow please
I've got a similar problem with an HD2 over here. Wifi does switch on, but it just won't connect to my router. The cirkel that is supposed to show when connecting to a network doesn't show either. I'm using WPA2-AES security, and yes, i did use the proper network key. I haven't tried connecting to other networks/using an alternative encryption method because a lot of other devices will then have to be reconfigured and it's not my own place. My Touch HD and 2 laptop connect to the network without any problems. The only solution I came across until now is doing a hard reset, which I would rather not do... I'm using a stock dutch rom (V1.43). Is it possible that upgrading to the newer 1.48 will solve this problem?
Have you tried removing the wireless security password and trying again? Test to see if maybe you are indeed typing in the password wrong.
Also check your exception list on your router, it might be blocking any other devices coming in.
I have the same problem.. Get the spinning loading circle and thats it.. But if i turn my belkin wires g router running wpa2 off then straight back on again the phone connects fine. But if i then leave my house or disconnect from the network then try and reconnect it wont and have to do the same process again. Luckily im also running a speedtouch 585 modem router which the phone connects fine to.
hey maybe it takes only a WEP key and not WPA as most people have. this is certainly the case as mentioned in the Wifi router article below -
http://www.mobilityminded.com/5438/wi-fi-router-on-htc-hd2-application-overview
Again me
It seems that it is problem with my router. HD2 was able to connect to open wireless a.p. in my town and all sow to my friends router which is using WPA security. So my linksys is not compatible, or i will try some other settings on it, but as other router clients have no problems, i am loosing my hope to have my HD2 connected at home unless i change router. But then another problem- which router will be compatible with all my devices in prise range of 100$
And replying to blackheart2925 my friend is using wpa not wep, i do not know other settings on his router but it is not security problem.
One thing is strange for my HD2 shows it is connected, router shows mac of HD2 among connected clients, but only HD2 do not have access to internet
allann said:
Again me
It seems that it is problem with my router. HD2 was able to connect to open wireless a.p. in my town and all sow to my friends router which is using WPA security. So my linksys is not compatible, or i will try some other settings on it, but as other router clients have no problems, i am loosing my hope to have my HD2 connected at home unless i change router. But then another problem- which router will be compatible with all my devices in prise range of 100$
And replying to blackheart2925 my friend is using wpa not wep, i do not know other settings on his router but it is not security problem.
One thing is strange for my HD2 shows it is connected, router shows mac of HD2 among connected clients, but only HD2 do not have access to internet
Click to expand...
Click to collapse
how are you connected to internet is it router which dials to isp or you have made a broadband dial up on your desk top ...
if you have dial up shortcut on desktop then you can not use internet via hd then change setting in router
better way is hard reset router and then reconnect hopefully it will solve your issue ..........
commando0 said:
how are you connected to internet is it router which dials to isp or you have made a broadband dial up on your desk top ...
if you have dial up shortcut on desktop then you can not use internet via hd then change setting in router
better way is hard reset router and then reconnect hopefully it will solve your issue ..........
Click to expand...
Click to collapse
Router "dials" to my isp and share internet for all connected devices...
Yes, i am going to hard resset my router, but have not much hope i sucsess
PROB:
If your HD2 connects to router but you cannot enter any web site, do this:
SOLUTION:
enter your www router settings - wireless - access control - MAC Address Filtering Table ->>>>> add your HD2 MAC adress
enter your www router settings - firewall - access control ->>>>> add your HD2 MAC adress
so, you have to add your MAC adress of HD2 into router TWO TIMES into TWO PLACES!
I had the same problem and..... solved
I have connections problems with my WIFI-Router!
I don't know where the problem is!
I have my wifi connection saved to my cell phone ("Remembered the network") but when the router is ON the phone tells me "Not in range" and doesn't connect to it automatically! AND that happens on the remaining 2 android phones that i have! So i guess the problem is not in the phone! Besides they scan many wifi signals in the area but not the one of my house!
However, if i keep restarting the router and forgetting the network then adding it manually, "sometimes" it works and all phones can connect normally to the router!
It is bugging me a lot because sometimes 2 days pass without being able to connect!!!
What can be this problem?!
Thanks
PS: PCs and my bro's nokia symbian connect normally to the router all the time!
I know this has something to do with MAC addresses and IP addresses but i dunno what...
What kind of router do you have, and what kind of network security?
Maybe try changing from wep to wap, I had Android on my old Rhodium, and it would connect to wap and unsecured, but wep wouldn't work. I think HD2's don't have the same problem, but anything's worth a try. There is no such thing as failure, just finding out what doesn't work before you can find out what does work
Sent from my... whatever
huggs said:
What kind of router do you have, and what kind of network security?
Maybe try changing from wep to wap, I had Android on my old Rhodium, and it would connect to wap and unsecured, but wep wouldn't work. I think HD2's don't have the same problem, but anything's worth a try. There is no such thing as failure, just finding out what doesn't work before you can find out what does work
Sent from my... whatever
Click to expand...
Click to collapse
First thanks for the reply!
I guess the problem is in the router too! Although i didn't have that problem weeks ago
I have D-Link router and secured with WEP!
Ok i will try to change the security
But does changing the security will affect the PC connection!?