try this to speed up your pocket pc, good programs , try for xda II at 530 mhz
I would have prefered you post all the warnings of using such utlity ... for some unexperienced users this could permanently damage their devices.
For all folks here ... pay all attention to the heat while working on high speeds ... and don't ever try ROM flashing on any speed but the default one (206 for XDA and 400 for XDA II)
Ive been running Gameboy Advance and SNES roms, using XPU scalar @ 530Mhz for hours and hours. The device gets VERY hot after 5 hours, but it still fights on without a restart...
Although, ive tried other clocking apps @ 600mhz and then it got so hot it restarted itself...
I use Pocket Hack Master and have had my device up to 1689Mhz without any ill effects, though this is apparently unusually quick for an XdaII - the SDRAM usually can't handle 147MHz.
With PHM, mine scales between 399MHz and 589MHz depending purely on load, I've been using it for about three months with no apparent problems.
I tried it on i-mate ... the device is frozen if I use 530 MHz
Mine runs fine at 530 and 473... I even did a benchmark in BetaPlayer; huge improvement at 530; however, I decided to back it off to 400 to save on batteries.
Biso007 said:
I tried it on i-mate ... the device is frozen if I use 530 MHz
Click to expand...
Click to collapse
Probably the SDRAM can't handle the 133MHz - it's the first thing that usually falls over. You could put the multiplier down to 1/2x from 1x and it would probably work but that would mean your RAM was only running at 66MHz.
ok i must be real tired...
how the heck do you install this program from those files??
Questions :
- At 472 MHz as well as at 530 MHz, the memory is underclocked (50 - 66 MHz). I ask if it would be possible to maintain the memory around 100 MHz (+/- 10 MHz) during the overclock.
- Does the XScale CPU have the frequency fixed at 400 MHz ? Intel didn't think to dinamical frequence switch ? (like in Centrino or P4M) ? Because if not, then this software would allow battery economy. But it's weird, Intel wasn't able to do the same thing ???
With PHM you can choose whether to 1/2x or 1x clock the SDRAM and the LCD. I use 1x, so when I'm running the CPU at 590, the memory is running at 147MHz, most Xda II's won't handle this but it appears I was really lucky and got very good RAM in mine.
Mi_ said:
Questions :
- At 472 MHz as well as at 530 MHz, the memory is underclocked (50 - 66 MHz). I ask if it would be possible to maintain the memory around 100 MHz (+/- 10 MHz) during the overclock.
- Does the XScale CPU have the frequency fixed at 400 MHz ? Intel didn't think to dinamical frequence switch ? (like in Centrino or P4M) ? Because if not, then this software would allow battery economy. But it's weird, Intel wasn't able to do the same thing ???
Click to expand...
Click to collapse
Are you sure in underclocked? I am sure the memory clock is set to standard freq. with all the benefits,like stability and faster processor clock (472-530)
You can verify it downloading other Overclocking applications,like made from Mamaich.
I verify with CPUID, it shows all PDA frequencies. I can post screenshots, at 530 MHz, the memory runs in 66 MHz.
That's why I posted my question.
err..so whats the best setting when using the XCPUScaler?
And how come cannot access settings for over 500Mhz? Mine goes up to 475only
In Option select 'show frequencies over 500mhz'
Mi_ said:
I verify with CPUID, it shows all PDA frequencies. I can post screenshots, at 530 MHz, the memory runs in 66 MHz.
That's why I posted my question.
Click to expand...
Click to collapse
Use Mamaich Overclock program with:
L 27
M 4
N 1,5
You will obtain SDRAM and MEM LCD 100mhz,CPU 597mhz PXBUS 199mhz
I've Benchmarked it with GX BenchMark with no good results.
So,best performance for gaming you will obtain on 530Mhz
unapproachable2kx said:
Use Mamaich Overclock program with:
L 27
M 4
N 1,5
You will obtain SDRAM and MEM LCD 100mhz,CPU 597mhz PXBUS 199mhz
I've Benchmarked it with GX BenchMark with no good results.
So,best performance for gaming you will obtain on 530Mhz
Click to expand...
Click to collapse
Done that.
But at 530 MHz, my memory cames down to 66 MHz thus not 133 MHz, I think it doesn't support anything above 100-105 MHz.
Now I want to benchmark myself , I'll try to find GX Benchmark.
I only regret the downclocking function of CPUScalar, that saves battery (can somebody confirm ?)
Re: download xpu scalar (speed up ur ppc to 530 mhz) for fre
Prada said:
try this to speed up your pocket pc, good programs , try for xda II at 530 mhz
Click to expand...
Click to collapse
Could you tell me how to install even I copied all the files to my XDA2 .[/quote]
After many hard-resets,installation of system files and progrs..
I can finally assure that CALLER-ID program seriously give conflicts on overclocked Cpu frequencies,more than 472Mhz..(like 530,ecc..)
And drains more battery power.
Just let you know..
Now is your choice..
To tell u the truth, i use xCPUScalar for a month in advanced mode:
0-15% - 300
16-40% -400
41-70% -472
71 -100 -530 and have no problems at all.
BTW - CallerID is a very uncertain subj by itself.
i also use xCPUScalar for a month in advanced mode:
0-15% - 200
16-40% -400
41-70% -400
71 -100 -472 and have no problems at all.
But I don't see where I can get over the 472 limit??
I have a XDA (QTEK 2020) with a 400MHZ chip.
I see you guys talking about 500 and more sometime???
and this is possible, where XCPUScalar indicate 472 MAX ?
Thank you
PS: OK I get it, I just forget to enable the "show frequency over 500MHZ"
Now I see 530MHZ.
Juste hope it's fine like this.
Related
Overclock is possible to 528 Mhz runs perfectly,had problems instability overclocking faster..
http://www.antontomov.com/cgi-bin/i...e9c6ed4ecf0df2c7e252;act=ST;f=15;t=337;hl=xda
Ahh..Overclocking of Intel PXA 263 is possible to 1GHz!!! Cool no? lol
only that don't think Ram will support the bus clock.
Post your comments guyz!
the flash in a pda is not something which speed is controlled by a devider like in a pc
your flash are in general 100times slower then sdram
it's one of the main bottlenecks of pda's
the access speed of a storage card like sd is 100times worse
people sometimes report odd issues when overclocking
and ones batt get chu'd up 100times faster
personaly i dident notice any speed difference between my xda1 200 and xda2 400 but then the sd interface of xda1 is much faster anyway
overclocking is ok on pc where you get gaming speed and maybe a bit of application speed but on pda's it's silly if you ask me
but then for some people overclocking is more of a hobby and the path to the goal and reaching the goal itself is more important for them then the price received at the goal
once saw a guy looking for a tool which he said would let him overclock his 7200rpm harddisk to 10K
heh
Pocket Hack Master runs the Jasjar version of the HTC Universal @ 624 Mhz with no apparent problems. It passes the stress test at this setting and runs video at this setting. I've noticed that when running video, Pocket Hack Master's processor use utility doesn't completely max out when the processor speed is set @ 624 Mhx and that (as others have noted) running video slower than 624 Mhz results in noticeable frame rate slowness.
Since it's only rated to run @ 520 Mhz, I'm wondering if running it @ 624 Mhz will shorten the processor life or cause more serious problems. The only definitive way to know would be to run long-term on the Universal @ 624 Mhz.
Can anything think of a way besides running a long-term test to determine if damage is being done to the Uni's processor by running it @ 624 Mhz?
I too am interested in this. What do people advise running at, at most?
PS: On my Xda Exec it fails the 624 test each time, only 520 works.
I also have the same problem - it fails the 620mhz test
mine freezes @ 624, ocasionally. Not very usable, and quite annoying. I do see the difference in performance, but it crashes too often to be true :roll:
Tried Latest XCPUSCALAR my screen goes mad, and crazy, also unusable. UNFORTUNATELY :evil:
Hmm weird, my XDA Exec runs just fine a 624 MHz in Pocket Hack Master wonder why some people are having problems...
Yeah mine has been fine @624 for two days no glitches at all mines a T-Mobile MDA Pro
mine is now approaching 3 weeks at this speed and its fine !!! TBH the CPU will be running a little warmer, because you are asking more of it !! but its not as if you are putting extra voltage into it or anything so the chances of it blowing or miniscule !! if it gets unhappy it will just lock up. any here are the settings I used in PHM
I left all the timings of every thing as normal but pushed the multiplier up 1 more to 624 MHZ if I try 2 more (728 MHZ) it crashes before it even begins the burn in stability test :shock: suffice to say all the timings are identical to a genuine intel 624 MHZ CPU
Using Anton Tomov's pocket hackmaster version 2005
L = 16
N = 06
A = 01
Turbo enabled
half turbo disabled (dunno what the point of a half turbo is, it just seems to halve CPU speed)
LCD_26 = 00 (dunno what this does but seems to have no effect)
Fast Bus enabled
after adding it dont forget to set as favourite and then you can enable the speed
using the above settings should give you this
CPU = 624
BUS = 208
RAM = 104
LCD = 104
Turbo enabled
SI (speed index) now 373 up from 341
MIPS (millions of instructions per second) now 261 up from 217
Memory (even though I did not overclock the memory bus) now 486 up from 465
as stated 1 more step to 728 MHZ is a no go, and if you try to decrease the bus speed and up the multiplier to get speeds in-between 624 and 728, it starts suffering from bottlenecking and is not worth it if you look at the actual stats of data rate (MIPS memory etc) despite the higher figure of CPU MHZ its actually running slower the other drawback to strange bus speeds is that screen begins to flicker
guys I apologise in advance for my dumb question : but where do I get the Pocket Hack Master;
or in fact where is a good source for progs and utilities for WM5 (I am new to this OS and platform) ???
I would appreciate your help and any directions!
im getting sick of xda pda.
i have xda,xda ll,xda lls & xda lli
i find all those pda r junk and useless.
gave me too much problem.
i even loose my business because of this useless pda
unknown_macuser said:
im getting sick of xda pda.
i have xda,xda ll,xda lls & xda lli
i find all those pda r junk and useless.
gave me too much problem.
i even loose my business because of this useless pda
Click to expand...
Click to collapse
Im sorry but if you were foolish enough to not have a backup of business critical data then you none other than yourself to blame !!! next time use this
http://www.sunnysoft.cz/en_clanek.php?clanekid=51
It is brilliant, I used it myself today and strongly recommend it
can p3600 be overclocked?
thank you!!!!!!
PS. I have the pocketpchack4 and I overclock it to 450Mhz but I want more.......................!!
nope.. pocketpc hack doesn't really work. If you run benchmarks at 200, 400 and 450 mhz, you'll get the same readings. So far, nothing out there can really modify the cpu speed.
As far as I know, there's no working program so far.
hi,there are news?
i'll want overclock my device.
the p3600i have the same processor of p3600?it work @500mhz...good...!
p3600i dont have the same cpu as p3600
the cpu speed is set by the crystal and multiplier
if the multiplier is not able to change using software
one cant overclock
Rudegar said:
p3600i dont have the same cpu as p3600
the cpu speed is set by the crystal and multiplier
if the multiplier is not able to change using software
one cant overclock
Click to expand...
Click to collapse
and then I can't overclock...bad bad bad...
it's impossible have cpu 500mhz...?
I think that was the same processor...
only the same processor as a pentium 1.4Ghz and pentium 1.8Ghz is the same processor
overclocking is running the component in this case the cpu out of specs
how many overclock a cpu can handle before freezing up varies alot
and can shorten it's lifespan and give alot shorter battery lenght
All tools i used to identify pocessor speed says that on my Loe CPU clocked at 512 MHz.
Is there any proof of 1GHz ?
Most such tools need to specifically support a CPU to give you a reading. Its probable that none of them support snapdragon. It could also be giving you a reading based on power saving throttling.
p-kirill said:
All tools i used to identify pocessor speed says that on my Loe CPU clocked at 512 MHz.
Is there any proof of 1GHz ?
Click to expand...
Click to collapse
is it necessary to check and confirm it?? An experienced user will feel the difference right away! HD2 is so speedy and instant, it tells everything!
I need to know that as well
go to qualcoom site, for this what is there our snapdragon is have the same number identity or else like this from htc hd
sory for my english
I was curious about how application utilize my Note capability, so I install CPU spy and reset timer. After that I played Mass Effect Infiltrator and Anomaly for 30 minutes. What make me very surprise is most of the time (almost 50%) Android is running on 500 Mhz. Only 20% of the time running on 800 Mhz and 30% running on 200 Mhz. My whole life is a lie ! Let alone GPU which I underclock to 200 Mhz, Why Samsung bother market dual-core 1,2 Ghz or even Quad-core 1,4 Ghz while HD 2012 Games only need dual-core 500 Mhz to run It smoothly. Is there any apps (beside benchmark) that fully utilize my Note ? Thank you.
Lol you should thank the developers of that game that they optimized code to run at 500mhz. If they made it use more your battery would drain more.
Youre thinking is different, its the game, not the phone that underutilizes lmao
Sent from my GT-N7000 using Tapatalk 2
I almost fell off my chair when i read the OP..
developers are trying their best to develop games, apps that are beneficial to users like us..
Now u are complaining that game run on less memory n RAM..
on the other hand if the game would to ultilise high RAM, high batt comsumption or high memory usage,wat will b ur stand?
If u reali think u had under ultilisrd ur Note, mayb u should sit down and think whether to sell it n get a phone that u can "fully ultilise" it
There Are Multiple Possinilities Actually
ramabg said:
I was curious about how application utilize my Note capability, so I install CPU spy and reset timer. After that I played Mass Effect Infiltrator and Anomaly for 30 minutes. What make me very surprise is most of the time (almost 50%) Android is running on 500 Mhz. Only 20% of the time running on 800 Mhz and 30% running on 200 Mhz. My whole life is a lie ! Let alone GPU which I underclock to 200 Mhz, Why Samsung bother market dual-core 1,2 Ghz or even Quad-core 1,4 Ghz while HD 2012 Games only need dual-core 500 Mhz to run It smoothly. Is there any apps (beside benchmark) that fully utilize my Note ? Thank you.
Click to expand...
Click to collapse
If you are not aware, off the apps portion, there are apps from market that transform your phone into:
1. Vibrator - https://play.google.com/store/apps/details?id=cenix.android.vbr&feature=search_result
2. Security Alarm - https://play.google.com/store/apps/...honeSecurityAlarmSystem&feature=search_result
3. Police Siren - https://play.google.com/store/search?q=security+Alarm&c=apps
I mean just to name a few, instead of benchmarking your phone, maybe it can be made for good cause when it is not performing telepony duty
[email protected] for android
I think its a good, I've underclocked my note to 1000 MHz and haven't notcied any difference in performance at all even during gameplay, saves loads of battery aswell. Might even drop it too 800 mhz to see if I can get away with that.
lewisteo said:
If you are not aware, off the apps portion, there are apps from market that transform your phone into:
1. Vibrator - https://play.google.com/store/apps/details?id=cenix.android.vbr&feature=search_result
2. Security Alarm - https://play.google.com/store/apps/...honeSecurityAlarmSystem&feature=search_result
3. Police Siren - https://play.google.com/store/search?q=security+Alarm&c=apps
I mean just to name a few, instead of benchmarking your phone, maybe it can be made for good cause when it is not performing telepony duty
Click to expand...
Click to collapse
Lol vibrator @1400hz lmao, imagine that :what::beer::thumbup:
Sent from my GT-N7000 using Tapatalk 2