I have writen a java application to read from GPS mouse. It reads for signal on the COM port to which GPS is connected using javax.comm API. It works perfectly fine with serial cable GPS mouse but when I try to use Bluetooth mouse it works but after sometime doesn't receive any data at the serial port, typically after 2-3 minutes.The serial port connection needs to be restarted again to read the signal again. I have installed the bluetooth patch available but even that doesn't help.
Any pointers !!
Thanks
Dhiraj
Related
I'm having problems connecting to a Bluetooth scanner. The scanner is a Datalogic BT100. The XDA (II) bonds successfully, but it won't establish a serial connection.
I've installed Towa's Pocket Bluetooth tools which gives the option of a serial port profile on COM7, but I still cannot connect to the COM port.
Any suggestions gratefully received!
I have tomtom 5 with a wired GPS and a powered PDA mount with a GPS input into it.
The Jam cannot seem to recognise the GPS when I link it into the PDA mount
Does anyone know how to make it work if at all does it work?
I'm not sure if the USB connect caters for a serial input??
HELP!!!!!
having the same issue, is there anyway what so ever?
no, not posible, there is no driver-less conversion posible from serial to usb, and the usb port can't act as usb Host
I could use some help or an answer to my problem. I have 8125 with tomtom 6 on it. I also have a wired GPS that I was using on my lap top. The gps has a usb connector so it could't be hook to the usb mini that is on the wizard.
So I got an idea of using a USB hub to give both power and connect together through the hub... Well no joy... I have tested all setting I can.. I turned off Beam, I tried changing all ports in exturnal GPS (even none) and it will not see the GPS. I tried all settings in tomtom also
So I guess the question is can you use the sync/charge usb mini/usb cable to connect to a hub that is connected to a usb GPS?
If no how do you use a wired GPS....
Thank you for any help....
no help in the house?
Guess nobody so far has a any info on how to help me with this problem...
You'll need to use a Bluetooth GPS.
I need to know if it is possible to use the micro usb connector on the P3600 as a serial port.
Suppose I have a device that can feed a serial stream and I want to use TomTom to show a moving map of the gps data I submit to the P3600, would that be possible?
If not, are there any other Mobile devices that have a serial port through their (micro) usb connector?
Thanks in advance!
I purchased one USB->Serial converter but i can't get it to work with the HD.
Does anyone have any success on either a bluetooth serial dongle, or a USB->Serial dongle which works with the HD?
I want to use it as a serial console for networking equipment, and also as a data logger for some other device.
cheers