Related
:shock:
I've been running the 4.00.10 beta along with new T-Mobile radio stack on my T-Mobile phone since thursday morning. It's been pretty stable.
But tonight I lost everything on my SD card again. Anybody else had this problem with the latest rom? What brand of SD cards are you using, if it has happened?
Any new software installed?
Last software I installed was Pocket Plus last night, but it seems to have been working ok up until the big kaboom.
Ok, of to do a hard reset and install things again. Fun fun!
Pocket plus has known issues with pppc2003. I have found that it's storage card module may cause problems with sd card erasures. Delete it and try resco taskmanager instead. It's not as intuitive but works great.
FYI the same thing has happened to a friend of mine and he called T-Mobile and they're sending him a new unit.
BTW he was running T-Mobile ROM 4.00.10 RS A.20 on the T-Mobile USA Network using a Sandisk 256MB SD.
I've had it hose my Sandisk 256mb card several times now, even with no other software installed.
A while back I read somewhere about some PocketPCs (Not PPC Phones) having problems with the sandisk cards erasing themselves. I am wondering if something in WM2003 is making them exhibit this behavior on the PPC Phone :shock:
sd disk erase
Same thing happened to me, It otherwise works well
Is it the brand of memory??? or version 4
Maybe a combination of a certain kind of sd card and the 4.0 os? Hmmm
sd erasure
Had the same with my XDA. I have an scandisk 256 mb unit inserted.
2 weeks ago I upgraded with a cooked version of the wm2003 .05 After a few days, when turning the decice off, I couldn't turn it on again using the on-switch button. Had to soft-reset to get started... Also at one time the device told me that my sd card was locked, but in fact had still 180 MB's left!!
I coocked a 2002 version in the kitchen and was lucky to be able to downgrade... Formated my SD card using my scandisk cruser mobile USB dard adaptor....
Now everything is ok on 2002. The wm2003 seems still very unstable to me
I posted a message with another string to get informed if it is still advisable to upgrade to 2003 at this time...
The webmaster himself did'nt encounter it personally yet but he stated that he only has the card in place occasionaly...
L8er
Sandisk 256
Have had mine erase once and has corrupted itself once more on the 4.00.5 rom....both happened after unit appeared to lock up and I soft reset.
I have been trying to cook a ROM for my XDA 1 using Pocket PC 2002 o2 3.17.03 and a few other programmes. I end up with about 250K vacant in my Rom.
When I burn and download it I download a file of about 15.8MB named rom but whenever I try to execute it nothing happens.
I have previously SER 1.2 installed. I have active synch up and running as well but as soon as I double click a black window appears for a few seconds and disappears.
Could you tell me what is the problem. I have noticed that such behaviour doesnt exist when I try Win mobile 2003.
FYI i am using a Windows XP machine to access internet with 256MB RAM.
make the rom as nbf or nb1 and not exe is my advice
here is a guide as to how you get it to the xda after that
http://forum.xda-developers.com/viewtopic.php?t=10698
sd way is much more safe
Will I need a card reader?
Hi,
I dont have a card reader with me. Do proceed by the suggested method would I need a card reader or anyother hardware other than my SD card (which by the way is a 64MB MMC card)
Will the existing information in the card be deleted? Would I need to backup that Info?
Regards,
download XDAtools.exe from here and you can use your XDA as a card reader/writer ... I 'm not sure the MMC can be used instead of SD
So, ive read post after post on performing this task and it is still beyond my capabilities. My wallaby is running ppc2002, rom version is 3.20.06, radio version 4.21.01 protocol version 32s54. It's running bootloader 6.22, i havent got active sync, xdatools wont run due to missing dll's or some such thing. Have a 1gig sd and a 512mb mmc,,,,
How can i upgrade with this setup? visited rom kitchen (awesome site) and cooked up a rom, extracted NK.nbf,
Need help! Surely i can upgrade with this equipment,
http://www.romkitchen.de/ make an exe then
Rudegar said:
http://www.romkitchen.de/ make an exe then
Click to expand...
Click to collapse
So is the exe executable from an sd card?
no the exe is only for activesync upgrades
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
how to flash using sd
if the tool is missing dll's then type in the name of the dll in google and find a place to get the dll and it will work
Rudegar said:
no the exe is only for activesync upgrades
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
how to flash using sd
if the tool is missing dll's then type in the name of the dll in google and find a place to get the dll and it will work
Click to expand...
Click to collapse
Right, well got active sync which meens the dll's i needed are in system 32 or whatever. But,,, Does bootloader 6.22 cause problems?? Thanks for all the help,, sure this fone is a bit old but who cares. Massive screen, runs office, windows media, touch screen, great fone
Any suggestions? I cant be the only one without a data cable or cradle. At the end of the day i want the fone to run best as possible. I am thinking there is alot more compatable software for wm2003 then ppc2002? @ the moment im running mame and pacman,,,,,,,, Speaking of software, is the media player in 2002 meant to be slow? As far as video go's ive given up there.
what is your problem?
Problem is i dont seem to be able to downgrade from bootloader 6.22 to 5.15 so i can update the rom to 2003. doing ll this without a data cable or cradle.
Bootloader should not cause any problems.
Missing Dll´s for XDATools came as you have ssen correctly form ActiveSync. So you need to install this programm on your PC to use XDATools. Afterwards you will be able to wirte the ROM on your SD-Card and then flash the new ROM on your device.
So if you don´t have any cradle or cable, and don´t sync with ActiveSync, how did you manage your conacts,install software, exchange files, ....?
Stefan
I see the confusion
I have card reader's on the front panel of my pc. So i am using xardit to transfer the bootloader images onto either an sd or an MMC card. So i transfer the patch with the NB2 extension on to the card. Cold reboot xda and it gets to the normal screen telling me i need the keycard.
I can use either xdarit or isoimagetool to transfer the .NB1 file on to an SD.
I have no data cable, so these are the only methods i can use. Just pc with multi card card, sd car, mmc card.
LumpiStefan, the rom kitchen is a damn fine peice of work!
when i had a wallaby i only ever flashed it using a sdcard reader
was pretty easy used ositool put the nbf / nb1 on the sdcard
after which the cardreader could no longer read the sdcard(that mean it's successfully planted)
then i put in the sdcard and entered the bootloader and it autostart upgrading
and when it's don i hardreset and thats it
Hi And thanks
I have tried this with a 1g toshiba sd and a 512 sandisk mmc, neither seem to auto start an update. I have browsed the web a bit and have found different theories on bootloader being a problem. My card reader is a panel on the front of my pc, or using my ngage. tried formatting fat16 or fat32. Im sure it's currently ppc2002 as this is the first screen after the o2 water screen
I think your problems come from your card reader. Many people have reported, that the internal card reader causes problems in writing the ROMs in correct way on the cards. I would s uggest to use an external card reader/writer.....
Stefan
and those are only 10£$€'ish
Thanks guys for your help, all up and running now. I appreciate the advise. Rudegar, my problem was getting the wrong info from elsewhere, the solution was the card reader, Cost me $9.00 au to buy one. I thank you both
Hi, since I upgraded my SPL to 1.54/1.56, i've tried installing both Dutty WM6.1 v2.9 and Mira WM6.5 v8.1 but neither of them seems to like my storage card, i have to do soft reset for it to recognise the card, but after a while the card will disappear again...
any1 got the same problem or know how to fix it please?
Thanks
gurluver said:
Hi, since I upgraded my SPL to 1.54/1.56, i've tried installing both Dutty WM6.1 v2.9 and Mira WM6.5 v8.1 but neither of them seems to like my storage card, i have to do soft reset for it to recognise the card, but after a while the card will disappear again...
any1 got the same problem or know how to fix it please?
Thanks
Click to expand...
Click to collapse
I've seen one other user with the same issue. What type / brand of SD card are you using? Trying to narrow down what is causing this... he had the same issue with same rom(s).
its the SanDisk 8GB SDHC one - one that came by default with Orange UK contract.
Btw, I did upgrade to the offcial 1.54/56 ROM before upgrading to the 2 ROMs above.
gurluver said:
its the SanDisk 8GB SDHC one - one that came by default with Orange UK contract.
Btw, I did upgrade to the offcial 1.54/56 ROM before upgrading to the 2 ROMs above.
Click to expand...
Click to collapse
Maybe it's got to do with the power management policies the Chef applied. Try to use schaps' Advanced Config 3.3 to disable SD Card Power Management and see if it helps.
Also, some caches and DMA could be the culprits but first let's see about power management.
The Power Management is disabled.
Also, 1 thing I particularly noticed is when I open Windows Media player, attempt to update my library on storage card, it can find all my music files, but when it attempt to add the music to the library, it doesnt. and then the sd card disappear from File Explorer, WMP libary option.
Backup your sd card to your PC, and reformat it. Had the same problem, fixed with a format
gurluver said:
its the SanDisk 8GB SDHC one - one that came by default with Orange UK contract.
Btw, I did upgrade to the offcial 1.54/56 ROM before upgrading to the 2 ROMs above.
Click to expand...
Click to collapse
I have the same SanDisk8GB SDHC one - default card which came with the phone. Same thing happned. It has become very slow to access, and practically useless, the phone cannot detect the card. If put into the computer with the adapter then also it is the same computer cannot read it or sometimes takes too long, cannot format. this happened after the 1.54/56 rom.
Happened to me also with some custom ROM.
I used my warranty to exchange the SD card.
My advice : backup your SD card when you can, from time to time.
Same Thing
Same thing happenned to my card. Same default card that came with the phone. But I have SPL 1.14 which I have had for a while now. I just flashed to a Miri ROM and it started happenning. I will try reformatting to see if it helps.
did you remove the sd-card when you flashed?
cRaCKwHoRe said:
I've seen one other user with the same issue. What type / brand of SD card are you using? Trying to narrow down what is causing this... he had the same issue with same rom(s).
Click to expand...
Click to collapse
I am "others" too.
I tried every hint I could find on the forum including disabeling the SD card power management and setting the PnP values higher.
Nothing works (and I have a Apacer 8GB card)
For me it narrowed down to:
1) Hardware faulty or
2) Hardware cannot "cope" with 8GB .
I've called HTC in the US - which where very friendly brw - and the lady said that most handsets are only guaranteed / tested to work with 4GB cards, Although there are other handsets in other countries who where sold with an 8GB card as a bundle.
Today I called HTC "support" centre in "New Zealand" and the phillipin/indian/nepalese customer service lady told me that my handset had been parallel imported and therefore needs to be send back to the NETHERLANDS for a diagnosis / repair!
I told her that if she would'nt give the number of their authorised repair centre in NZ I might have to think to contact Ministry for consumer law. So I got the number and I will go there now, cheking what the story is..will keep you updated.
gurluver said:
Hi, since I upgraded my SPL to 1.54/1.56, i've tried installing both Dutty WM6.1 v2.9 and Mira WM6.5 v8.1 but neither of them seems to like my storage card, i have to do soft reset for it to recognise the card, but after a while the card will disappear again...
any1 got the same problem or know how to fix it please?
Thanks
Click to expand...
Click to collapse
[I said:
I doubt that the new SPL 1.54/1.56 is related to the SD card problem as I also downgraded to original HTC rom with spl1.14 and still have the same problem[/I]
Click to expand...
Click to collapse
EDIT: gurluver I think you're right! I downgraded my device now back to spl 1.14 and no problems anymore. As I am discussing this with crackwhore it seems that
1) some countries's touch hd might have a different hardware
2) however even though I have downgraded to official HTC ROM spl 1.14 (and the card is working fine then) as soon as I upgrade to offical and / or other spl 1.56 the problem appears again.
Conclusion: I have to go and (probaley argue) with HTC and see if they are willing to either fix it or send me a new device.
Will keep you posted
so to sum up, i guess i'll have to try these when i have sometime, and see what happens after each step, and only go to next step if previous step works.
- restore to Orange UK ROM SPL 1.14
- upgrade to Official WWE SPL 1.54/56
- Try another 1.54/56 ROM.
- Format the card
- Install SD tune up
I'll report back here my result.
update...
i have flashed my device several times, at least 15 times,.always using USB activesync, never thru the stotage card. I have v1.14 and I have never had a problem. After rebooting the phone a couple of times, I got my card to reappear today long enough to backup my stuff. Then I formatted the card, put it back in, loaded it up with the same files, and I havent had another problem, though its only been about 8 hours.
gurluver said:
so to sum up, i guess i'll have to try these when i have sometime, and see what happens after each step, and only go to next step if previous step works.
- restore to Orange UK ROM SPL 1.14
- upgrade to Official WWE SPL 1.54/56
- Try another 1.54/56 ROM.
- Format the card
- Install SD tune up
I'll report back here my result.
Click to expand...
Click to collapse
restore to orange UK ROM spl 1.14..and you will see that you will be sweet. After I upgraded to official SPL 1.54/56 it didnt work again..and I tried several versions (NDL; came with the phone , EUR & WWE)
I just think that its not right to be "stuck" with spl 1.14 in order to use or card...
SD Card Problem
I had this problem last night. Basically my card just disappeared from the file explorer. Could not connect it to disk drive mode or anything. Took the card out, re-inserted and the card would appear for a few seconds and then go again. Soft re-setted and it would appear for a bit then disappear.
Done a hard reset and the card still would only appear for a while until I tried to access it then it would disappear.
I eventually narrowed my problem down to something I had installed on the card which was MaxTTM. After deleting this folder from my card, it remained visible. Been working fine ever since. I didn’t have to delete my music or video files which make up around 6-7gb of my card. From now on I think I’ll install my software on the phone as opposed to memory card. My card is a 16gb Sandisk.
When the problem happened to me, first, only some directories had disapeared. Or at leat I couldn't access to them.
Even with a µSd card reader on the PC.
I formated it with the storage tool, on the HD, because the PC would'nt see it.
A week later, I couldn't access to the card anymore. Neither on the HD, nor on the PC.
I concluded that the card was destroyed.
Hopefully it was still under warranty.
I don't blame the cooked ROM I was using. Maybe the SDtuneup with some parameters I entered with Advanced config tool did the mess.
Like power management.
My first SD corruption occured when the card was almost full, and I was downloding a file with Opera. In the meantime I plugged in my PC in mass storage mode. I recognize my error. But instead of simply having a file system corruption, why did it destroyed the card ?
Because after then, the card access was longer. Perhaps the system was trying to recover some bad sectors ? I'm working in phone industry, and we do a lot of tests on these kind of use cases. So I can't beleive HTC hardware isn't that robust.
In my case, it ended with a hardware destruction. Even on other devices (with other OS/ ROM) it also failed reading.
Bad luck with a weak µSD card ?
gurluver said:
so to sum up, i guess i'll have to try these when i have sometime, and see what happens after each step, and only go to next step if previous step works.
- restore to Orange UK ROM SPL 1.14
- upgrade to Official WWE SPL 1.54/56
- Try another 1.54/56 ROM.
- Format the card
- Install SD tune up
I'll report back here my result.
Click to expand...
Click to collapse
Card done these step - works fine on 1.14, breaks on Official WWE 1.54/56.
I guess any of us who have this problem should probably email HTC so they release a fix for this.
gurluver said:
Card done these step - works fine on 1.14, breaks on Official WWE 1.54/56.
I guess any of us who have this problem should probably email HTC so they release a fix for this.
Click to expand...
Click to collapse
I've sent my device in for diagnosis / repair / swap . I will update you what's happened. Good Idea with writing to HTC though
I had also an old Sandisk 6 GB card and copied to it the content from 8 GB card (which came with HD). That solved my (SD disappering) problem !
Hello folks,
I figured I would go to the experts to get an answer to my question.
On my universal I was running Windows Mobile 6.1, I didn't really like it as the phone was unstable, so I downgraded to Tmobile Windows Mobile 5 (which is what ships on the phone) everything is running smooth (Shout out to SPB Shell 3.0 AWESOME!!!)
anyways after the downgrade which went through without incident, my SD card reader does not SD cards, I know it is not hardware because it worked fine when the device was running WM6.1.
Anyome have any ideas as to what happened?
the device simply does not recognize any size, 32MB all the way to 2GB.
I have searched and found nothing.
Anyone have an updated driver for the SDCard reader?
I have extRom installed so I can put whatever I want into EXTRom and have it install.
Crapgame
It's because native WM5 can't use SDHC (SD cards are only up to 2GB). I think you can simply install SD settings by OllieD - where you can change to Type 1 or 2. Sorry unless someone else can help, you'll have to search for it.
I think i have the same issue.
The device sometimes see the card when set to standard SD or SDHC Type-I but it's really inconsistent.
Driving me nuts.
I had a similar problem, i had to eject and reinsert the card multiple times to get it to see it. The card SEEMED fine because it would work in my pc (via usb adapter)) and digital camera with no problems. But when i tried the one from the camera in the universal it worked fine, absolutely no problems.
So I bought a new sandisk one from ebay and all has been fine since, seems like it was being picky about the original SD!
i think, the sd card is formatted fat16
you formatted with "Haret"?
Haret?
Sorry for the noob question, but what do you mean?
I have tried formatting the card fat16, fat32, NTFS
nothing works
I have even tried install SD settings by OllieD adn that did not work
according to the specs I should be able to use my 2GB Sandisk Extreme III 2.0 GB SD Card, but alas my uni just does not see it.
any other suggerstions tips?
Also does spbsoftwarehouse's backup work really well?
I want to try some other ROMS on the device and I dread having to reinstall everything and reconfigure it too.
I would much rather back the dang thing up then experiment with various ROMS and then if nothing is to my liking, put my old ROM back with all my 'stuff'.
I have similiar problem.
In the past I have changed many ROM's from Tomal and many others. WM 5, 6.1, 6.5 and never had a problem with the card.
My last ROM where everything worked was Luca15thebig. After that I wanted to go back to Tomal V8.9 and then my problem started:
I did DOC format (always do that), put Tomal's ROM - ups, no SD card (with any SD card settings).
Did some searching on the forum, found similiar problem which was solved by flashing some factory shipped i-mate ROM. Again, DOC format, flashing that ROM (it is all-in-one ROM: radio, ext-rom and operating system). Booted that system (wow, time-warp to past ), frankly I didnt expect that my 8GB SDHC will work there - and it didnt.
Again DOC format> flashing Tomal V8.9 ROM> upgrading radio (that i-mate ROM reverted it back to 1.03). After a while booted Uni with Tomal's ROM, no SD card. Tried all settings, nothing.
Tried same thing but with that new Thing V2.3 ROM (very fast and stable BTW). Same thing - no SD card in file explorer.
My card works in my laptop. I even tried to format it in laptop - and my Uni still dont see it.
My friend has an Uni and I tried that card in his device. It works (he is using Tomal V8.7 ROM). Tried his 1GB SD card in my Uni - not working in my device.
Im no specialist but i think you guys have a hardware issue with the SD port. Maybe loose or something inside. Hope thats not the case. If multiple cards using multiple Roms do not work in Uni but work anywhere else then I would have someone or myself check to make sure the SD slot is soldered properly still.
i've encounted many issues with the SD + sdhc drivers for the universal, i'llw rite up a longer post with more information later as i've had a long day.
summary: keep trying different cabs, one will eventually work. make sure its formatted FAT32. popping it in and out+softresetitng a few times may be required.