Database Users

XDA w/ ppc2002 upgrade request help to 2003

Hi,
This probably the most asked question here yet I have one thing thats different to the others from what I have read.
I live in Australia, my 02 XDA ppc isnt sim locked or anything however my issue is related to the o/s I have ppc2002 I wanted to upgrade to 2003 and found a file for download and am unaware if this file is the correct file to download for upgrade to my XDA?
I also know I need a radiostack which will work on my XDa once it has been updated to 2003.
2003 file @ http://cuba.calyx.nl/~jsummers/XDA/PPC2003PE.nb1.zip
Radiostack which will work for me?????
Any help would be appreciated aswell as telling me what are the neccessary files on my PC to use to flash the ppc phone edition via my USB cradle also.
Any other info should be available with my profile.
Regards
A7MAD

Hi,
if ur phone works fine in making/receiveing calls, then all u need is a ROM upgrade. goto the kitchen at www.yorch.net and cook a ROM based on 4.00.05 ENG. select the file to be an exe file. download the file to ur PC and connect the xda to the cradle and make sure it's connected to power. run the exe and follow the instructions.
good luck

Hi,
Thanks Biso007 for all your info/help.
I am currently downloading the file that I 'cooked' as I type this out however one thing I was not sure about was in the string section was I to change the string to 4.00.05 as it was set on 3.16 ...
I did change it and its downloading I assume there should not be any issues.
If there is any concerns or if I did the wrong thing by that please inform me... BTW the file was made into an .exe.
Regards
A7MAD

Hi,
I visited www.yorch.net and 'cooked' my own ROM made it into an exe and have it downloaded right here it's a 4.05.00 rom flash but I have to ask what software can I use to flash the unit with because I do not have an SD card so I am stuck using my PC to do the flash, I have the official backup files for my ppc from 02's site so I am ok I guess if all else fails i will flash back to what I am currently using.
I wanted to flash the rom onto my ppc however what software can I use? I tried Microsofts Sync software I have 3.7 but it doesnt allow me to flash as it gives me an error message.
Message says:
"Your Device Information;
PW10A1:001
3.20
English
Your upgraded image info;
PW10A1:007
3.16
English
Please download the compatible utility and try again"
Any help would seriously be appreciated, but what is the compatible utility?
Regards
A7MAD

unfortunately this is a known issue with some ROMs that can't accept the exe method. you are stuck with the SD card upgrade.

Will adaptrom not work for this?

How do I upgrade from Special Edition ROM v1.2 to PPC2003?

Hi,
I installed XDA-developers Special Edition ROM v1.2 to unlock my SX56, but I really need PPC2003 on my device.
How do I go about installing the new PPC2003 Rom? Will my device still unlocked if I do this?
Thanks for your help,
Therese

Re: How do I upgrade from Special Edition ROM v1.2 to PPC200
tperri said:
Hi,
I installed XDA-developers Special Edition ROM v1.2 to unlock my SX56, but I really need PPC2003 on my device.
How do I go about installing the new PPC2003 Rom? Will my device still unlocked if I do this?
Thanks for your help,
Therese
Click to expand...
Click to collapse
You can install it like aou install any other ROM.
Your device will be still unlocked...
HTH
Stefan

thank you!
I'll try that right away, then!
-Therese

I tried to run the instsall from Siemens and got an error me
I attached a gif oh the error

Re: I tried to run the instsall from Siemens and got an erro
the only way is to extract the nbf from the upgrade package and use sd-flash upgrade method. the original at&r siemens installer will always verify your xda rom b4 proceeding. another way would be flash back to at&t ppc2003 rom and the installer will work.
tperri said:
I attached a gif oh the error
Click to expand...
Click to collapse

I don't know how to what you suggested ...
Are there any detailed documents I can read about doing this?
Thanks!

Re: I don't know how to what you suggested ...
tperri said:
Are there any detailed documents I can read about doing this?
Thanks!
Click to expand...
Click to collapse
thats my question, anyone have some clues for a not-so savvy person to go from xda's rom to wm2003?
Thanks

hope this will help:
1. cook any wm2003 ROM from the kitchen at www.yorch.net and select the .nbf file type and download the resulted file which should be of 32 MB in size.
2. insert a 64 MB or higher SD card in your xda and use the OSImage tool in the XDAtools application to move this file to the SD card using the PC and the cradle.
3. go to the bootloader screen (power + soft reset). the xda will recognize the card content and it will be flashed.
4. do hard reset and you should get a new wm 2003 ROM by now
good luck

try this upgrade procedure
I got the same error ERROR 012: CHECK ERROR when running the PPC2003 upgrade from Siemens. So here what I did to get around this.
1. Download and install XDATools-Jeff. http://cuba.calyx.nl/~jsummers/XDA/XDAtools-Jeff.exe
2. To upgrade the ROM to A.30.09 ENG:
a. When install the upgrade package from Siemens, the install process created a folder named SX56 upgrade utility in your PC's Program Files folder.
b. You will find the ROM image in file NK.NBF in this path C:\Program Files\SX56 upgrade utility\english\NK.NBF
c. Use the OSImageTool from the XDAtools installed in step 1.
d. Specify Source: C:\Program Files\SX56 upgrade utility\english\NK.NBF
e. You will have 2 options for the Destination. The safest option will be download the image to the SD Memory Card, then install from the card. Or you can download the image directly to the XDA's internal ROM.
f. Folow the instruction on the screens. Should take about 5 minutes to download the image.
g. Cold boot after install is completed. Check your ROM version to make sure it is A.30.09 ENG
Note that the above procedure will only upgrade the ROM and not the Radio Stack. If you want to upgrade the Radio Stack, here is the procedure:
3. Upgrade to Radio Stack version A.33.02:
a. In the folder C:\Program Files\SX56 upgrade utility\english, you will find the following 4 files:
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUpgrade.exe
b. Use ActiveSync to copy these 4 files to your Pocket_PC's Windows directory.
c. You will then run the RSUpgrade on your Pocket PC. This will install the RS upgrade. Use the File Explorer to locate the RSUpgrade.exe and then click on this object to execute.
d. When the upgrade is completed, cold boot, then check for the Radio Version to make sure it is A.33.02.
Good luck and hope this help!

di we have to upgrade to the n radio lavel ?
I have an unlocked [email protected] Sx56 that i got form rogers.com an AT&T canada company... I personally use the unit with a Fido (microcell) plan
i did upgrade it using the instructions you posted here and it was a success...
Do i have to upgrade to the latest Radio level... now iam at A.20.10 or i would lose my GSM capabily as they say here at the forum..
thanks in advance
Ps. I noticed that my sesitivity bar grapg is allways at bar one i used to have 2 to 3 bars or is just the new graphices for ppc2003.

Thanks for the mini guide. I do have a n00b question though. What is the purpose of upgrading the Radio Stack?
Also, I'm here in the US with a T-Mobile PPC phone which I am selling (just didn't get that much use out of it). As incentive to buyers, I offered to unlock it, originally thinking that I could just use the XDAunlock.exe to do it, but it turns out the phone is a 3.14.40, I have no serial cable (only the usb cradle), and no SD card (though it would hurt to pick up one).
So is it still possible for me to unlock this phone, I guess using the XDA Special Edition ROM, without having a SD card? From reading some stuff on here, I think that's right, but if I ever need to go back to the original ROM, or upgrade to one of the WM2003 ROM, I need an SD card to use with the XDAtools?
If anyone can PM me with some general info on this stuff I would greatly appreciate it, as I really don't have time right now to scour the forums as much as I'd like to. Basically, you can see my device info in my profile, so if you can give tips on how to unlock, backup original ROM, and what I can/cannot do without a SD card, that would be wonderful. XDAUSER's post gives a good guide on upgrading to the WM2003 so I guess that's covered. Thanks in advance for helping out a n00b.

Diggin the help!
Followed the instructions from XDAUSER...works great! Thank you!
Acutally, I performed the proceedure using the Seimens 2002 update first. When I reset the device, it booted up fine...it didn't update the radio stack during the install, however.... I reset the device, it came up and created an active sync - then just ran the 2003 update utility. Worked GREAT, and updated the radio stack automagically.
p.s. I don't have a memory card, so just did it right to the device! (I was chewing my nails!)
I really appreciate this site, and the users who give great advice... :wink:
Thanks again!

Re: try this upgrade procedure
XDAUser, when I cold booted, my ROM version said 30.05 - is that ok?
How do I look at my radio stack version? Can I only see that when I cold boot?
Thanks for all your help!
Therese
XDAUSER said:
I got the same error ERROR 012: CHECK ERROR when running the PPC2003 upgrade from Siemens. So here what I did to get around this.
1. Download and install XDATools-Jeff. http://cuba.calyx.nl/~jsummers/XDA/XDAtools-Jeff.exe
2. To upgrade the ROM to A.30.09 ENG:
a. When install the upgrade package from Siemens, the install process created a folder named SX56 upgrade utility in your PC's Program Files folder.
b. You will find the ROM image in file NK.NBF in this path C:\Program Files\SX56 upgrade utility\english\NK.NBF
c. Use the OSImageTool from the XDAtools installed in step 1.
d. Specify Source: C:\Program Files\SX56 upgrade utility\english\NK.NBF
e. You will have 2 options for the Destination. The safest option will be download the image to the SD Memory Card, then install from the card. Or you can download the image directly to the XDA's internal ROM.
f. Folow the instruction on the screens. Should take about 5 minutes to download the image.
g. Cold boot after install is completed. Check your ROM version to make sure it is A.30.09 ENG
Note that the above procedure will only upgrade the ROM and not the Radio Stack. If you want to upgrade the Radio Stack, here is the procedure:
3. Upgrade to Radio Stack version A.33.02:
a. In the folder C:\Program Files\SX56 upgrade utility\english, you will find the following 4 files:
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUpgrade.exe
b. Use ActiveSync to copy these 4 files to your Pocket_PC's Windows directory.
c. You will then run the RSUpgrade on your Pocket PC. This will install the RS upgrade. Use the File Explorer to locate the RSUpgrade.exe and then click on this object to execute.
d. When the upgrade is completed, cold boot, then check for the Radio Version to make sure it is A.33.02.
Good luck and hope this help!
Click to expand...
Click to collapse

Upgrading Radio Stack
I'm new to the Pocket PC Phone device so not quite sure what all the enhancements goes into RS A.33.02. I heard that there is some GPRS enhancements for continous data connection. This is great if you use the XDA for data such as internet access. So far, I cannot find any official documentation from neither Siemens nor AT&T about this new RS???
My RS was at version A.20.10 and it was working fine with Cingular SIM while roaming on other networks such as T-Mobile or ATT. But as soon as I'm returning to the local service area, I got no signal on my XDA. I guess it is because I'm in a small town and their cellular network has not yet been upgraded. I contacted Cingular Technical Support but they refused to help me since I don't use their equipment. This is kindda sad because I'm working in this small town 80% of my time.
I then try to upgrade RS to the newest version A.33.02 from Siemens in hoping that it will fix the problem, but still no signal. I read somewhere in this forum that I should try to upgrad to T-Mobile RS, but when I try to download the T-Mobile upgrade file from Yorch.net, I cannot unzip the file because of its password protection. I tried to download the RS upgrade directly from T-Mobile, but I need to have a valid T-Mobile phone number (which I don't have) in order to download.
So for now, I have to use a Cingular cell phone while I'm in this small town and carry both a cell phone and my XDA. When I'm travelling outside of this local service area (roaming), I switch the SIM card. It such a pain and I hope I don't wear out the SIM card from switching it back/forth.
If the current RS is working for you, then don't upgrade it. Unless you know the new RS will give you the functionality that you will need. If you decided to upgrade, make sure you save a copy of the previous RS version in case you need to go back. Use the RS upgrade procedure as a guide.
Good Luck.

Re: Upgrading Radio Stack
I have Cingular and can't get their SIM card to work in my device - how did you do that? I was going to go out and get a T Mobile SIM instead but if I can get the Cingular to work, I won't.
Is it the radio stack version that makes using the Cingular SIM possible? If so, that is the radio stack I need to get.
Can you help me with getting that one?
TY!!!
XDAUSER said:
I'm new to the Pocket PC Phone device so not quite sure what all the enhancements goes into RS A.33.02. I heard that there is some GPRS enhancements for continous data connection. This is great if you use the XDA for data such as internet access. So far, I cannot find any official documentation from neither Siemens nor AT&T about this new RS???
My RS was at version A.20.10 and it was working fine with Cingular SIM while roaming on other networks such as T-Mobile or ATT. But as soon as I'm returning to the local service area, I got no signal on my XDA. I guess it is because I'm in a small town and their cellular network has not yet been upgraded. I contacted Cingular Technical Support but they refused to help me since I don't use their equipment. This is kindda sad because I'm working in this small town 80% of my time.
I then try to upgrade RS to the newest version A.33.02 from Siemens in hoping that it will fix the problem, but still no signal. I read somewhere in this forum that I should try to upgrad to T-Mobile RS, but when I try to download the T-Mobile upgrade file from Yorch.net, I cannot unzip the file because of its password protection. I tried to download the RS upgrade directly from T-Mobile, but I need to have a valid T-Mobile phone number (which I don't have) in order to download.
So for now, I have to use a Cingular cell phone while I'm in this small town and carry both a cell phone and my XDA. When I'm travelling outside of this local service area (roaming), I switch the SIM card. It such a pain and I hope I don't wear out the SIM card from switching it back/forth.
If the current RS is working for you, then don't upgrade it. Unless you know the new RS will give you the functionality that you will need. If you decided to upgrade, make sure you save a copy of the previous RS version in case you need to go back. Use the RS upgrade procedure as a guide.
Good Luck.
Click to expand...
Click to collapse

quick side question: where can I find the T-mobie final beta of WM2003? Did a search of the forum and can't find any info.
Also, if I use the Siemens WM2003 upgrade, then is there info I have to enter in by hand to get the phone to continue to connect to the T-mobile network? Would it just be the same values that were programmed in my phone prior to upgrading? Thx.

Re: try this upgrade procedure
tperri said:
XDAUser, when I cold booted, my ROM version said 30.05 - is that ok?
How do I look at my radio stack version? Can I only see that when I cold boot?
Thanks for all your help!
Therese
Click to expand...
Click to collapse
If you downloaded and install the upgrade from Siemens, then you should get the ROM A.30.09 ENG image. I downloaded the english version here:
http://www.my-siemens.com/MySiemens...D%2FHD%2FSX56POCKETPCPHONE%2Fdanda%2F,00.html
To check your current ROM/RS version:
Start>Settings, select System tab, click Device Information.

Re: try this upgrade procedure
Ok here is what I have in my system settings:
ROM version A.30.05 ENG
ROM date 11/17/03
Radio version 6.12
Protocol Version 324e4
I didn't get version 30.09 when I installed from this link below, I got the 30.05.
What is the radio stack you are on that allows you to use Cingular? Do you know how I can upgrade to that radio stack?
XDAUSER said:
tperri said:
XDAUser, when I cold booted, my ROM version said 30.05 - is that ok?
How do I look at my radio stack version? Can I only see that when I cold boot?
Thanks for all your help!
Therese
Click to expand...
Click to collapse
If you downloaded and install the upgrade from Siemens, then you should get the ROM A.30.09 ENG image. I downloaded the english version here:
http://www.my-siemens.com/MySiemens...D%2FHD%2FSX56POCKETPCPHONE%2Fdanda%2F,00.html
To check your current ROM/RS version:
Start>Settings, select System tab, click Device Information.
Click to expand...
Click to collapse

Re: try this upgrade procedure
I don't understand why your current ROM is not at A.30.09. Did you try to run any others ROM upgrade beside the one from Siemens? My thinking is that if you run another ROM upgrade, the file NK.NBF may got replaced. Did you try manual upgrade procedure immediately after running the Siemens' upgrade?
I knew the RS version A.20.10 will work with Cingular in roaming mode. I tried this RS version while I'm in Houston Texas, and also in Indianapolis Indiana. But when I arrived at my office in a small town 60 miles from Indianapolis, which is the Cingular local service where I got my cell phone, my XDA stopped working. I then upgrade RS to A.33.02 and still no luck.
I will be back to Houston in Feb 19, then will test the XDA with RS A.33.02.
To get the the RS A.20.10, go to www.yorch.net, click Upgrades, then select A.20.10 to download.
Regards
tperri said:
Ok here is what I have in my system settings:
ROM version A.30.05 ENG
ROM date 11/17/03
Radio version 6.12
Protocol Version 324e4
I didn't get version 30.09 when I installed from this link below, I got the 30.05.
What is the radio stack you are on that allows you to use Cingular? Do you know how I can upgrade to that radio stack?
Click to expand...
Click to collapse

Re: try this upgrade procedure
What I did was download from Siemens and it wouldn't let me install because I was using the XDA Special Edition ROM, so I installed that OSIMage tool and let that upgrade my XDA. That is all I did. Was I supposed to run another ROM upgrade besides that?
I'll wait on getting that new radio stack until I hear back from you about the other part
Thanks so much!!! You are great.
XDAUSER said:
I don't understand why your current ROM is not at A.30.09. Did you try to run any others ROM upgrade beside the one from Siemens? My thinking is that if you run another ROM upgrade, the file NK.NBF may got replaced. Did you try manual upgrade procedure immediately after running the Siemens' upgrade?
I knew the RS version A.20.10 will work with Cingular in roaming mode. I tried this RS version while I'm in Houston Texas, and also in Indianapolis Indiana. But when I arrived at my office in a small town 60 miles from Indianapolis, which is the Cingular local service where I got my cell phone, my XDA stopped working. I then upgrade RS to A.33.02 and still no luck.
I will be back to Houston in Feb 19, then will test the XDA with RS A.33.02.
To get the the RS A.20.10, go to www.yorch.net, click Upgrades, then select A.20.10 to download.
Regards
tperri said:
Ok here is what I have in my system settings:
ROM version A.30.05 ENG
ROM date 11/17/03
Radio version 6.12
Protocol Version 324e4
I didn't get version 30.09 when I installed from this link below, I got the 30.05.
What is the radio stack you are on that allows you to use Cingular? Do you know how I can upgrade to that radio stack?
Click to expand...
Click to collapse
Click to expand...
Click to collapse

Help please using XDAtools as I am a dummy!!!

Sorry folks but I have already posted this and don't know how to delete the previous post. after I reviewed the previous post I don't think I made myself clear enough. Please accept my apologies. But would appreciate help on this.
I have read the majority of the info on XDAtools on the forum and installed I believe correctly. I currently run on Win98SE. I have installed Jeff summers version of XDA tools. And though I think I understand what I am doing I am not totally convinced. Before I embark on cooking roms and upgrading etc I would like to be able to do the following:
1: Dump my current rom from my device to my PC I can do this using
XDAtools OSImage. But have noticed that I can only appear to dump
this as NB1(windows CE(*.nb1) type files if I try to call this NBF I get
the following errors:
”error opening C:\program files\xdatools\bootloader_v5_15.nb0ea for
reading. the system cannot find the file specified”
”error opening source bootloader from C:\program
files\xdatools\bootloader_v5_15.nb0ea. error opening target device”
Is it possible to dump my ROM to a file called ‘xxxx.NBF’? or must I stick with *.NB1? this is not a problem as long as the NB1 file can be reloaded.
2: When I try to upgrade my ROM by using OSImage tool and selecting
source as:
‘C:\PROGRAM FILES\XDATOOLS\BINARIES\ATT160204.NB1’
Select destination as ‘device memory (via Programme A) ‘
When attempting to load an ‘NB1’ ROM from my PC to my device memory
(via Programme A) I always get the following message:
”Programme A not found - run with --register error opening target device”
I originally ran the ProgrammeA with ‘--register’ when first installed and tried numerous times since. Can someone please help as I am sure it is something simple I am missing. I only want to be able to use XDAtools to dump and restore ROMs.
I have tried searching for a solution but to no avail. Any help appreciated.
Thanks in advance John.

May you tell your current ROM version and device type?
Some ROMs do not accept the EXE or the XDAtools with NBF files upgrading methods. You may have to use the SD card flashing in this case.

Thanks Bis
Thank you Biso007 I am currently running A.30.09.ENG and my device type is an XDA1. But I believe the problem is associated with XDAtools ProgrammeA as it cannot find the specified files. Though I have followed all instructions for definition. There is probably something simple I am missing. You see I only want to be able to use XDAtools to dump and restore Roms without the need for SD/MMC cards.
Thanks John

Try downloading the XDATools from Jeff Summers site, it has all the missing bits, including the required batch file :
http://cuba.calyx.nl/~jsummers/XDA/XDAtools-Jeff.exe
That's from the sticky XDATools thread, probably read through there and you will find most questions answered if you continue to have problems.
Remember though that the SD card method is the preferred option, and if you burn any T-Mobile ROM's the SD card is *required* to reverse that.

Re: Thanks Bis
jdoherty76 said:
Thank you Biso007 I am currently running A.30.09.ENG and my device type is an XDA1. But I believe the problem is associated with XDAtools ProgrammeA as it cannot find the specified files.
Click to expand...
Click to collapse
XDAtools cannot work with WM 2003.
and you no need to backup A.30.09.ENG (ATT USA version WM2003), you can get it from online!

cgigate said:
XDAtools cannot work with WM 2003.
Click to expand...
Click to collapse
is that confirmed ??

Biso007 said:
cgigate said:
XDAtools cannot work with WM 2003.
Click to expand...
Click to collapse
is that confirmed ??
Click to expand...
Click to collapse
Yes, it for sure!
XDAtools only works with Pocket PC 2002 or some test version WM2003.(<4.0.11)
It cannot work with WM2003 official release (AT&T A.30 or T-mobile).

Thats weird, I am positive I used xdatools to program my sd card through reader writer after downloading the official WM2003 upgrade, in fact I must have used that method because I had to seperate out the radio stack and program just the ce rom, I have no other tools to do this.

XDAtools only works with Pocket PC 2002 or some test version WM2003.(<4.0.11)
Click to expand...
Click to collapse
I think you'll find that it only does *not* work with T-Mobile WM2003 ROMs. That's only because they lock up their OS to try and prevent us from changing ROMs. I don't think that's the case with any other manufacturer. I also think it doesn't make any difference whether it's WM2003 or WM2002, it solely depends on whether the manufacturer locks the OS.

Thank you cgigate & ebswift re XDAtools/WM2003
Thank you Cgigate and ebswift maybe this is why I am encountering problems with my download and restore of my ROM. I inadvertently choose a WM2003 AT&T rom to practice with. Maybe I should have chosen a PPC 2002 ROM to test??
I thought I had a problem with XDAtools and that I did not have all the correct links/files in place. Maybe I should dump my ROM and try restoring a PPC2002 and then re try my test. Thanks again guys.

i used xda tools with the AT&T WM2003 rom on my uk o2 xda with no problem. I wanted to keep my old radio stack as it was working fine and just used the os upgrade file, via SD card.
I would recommend updating activesync to 3.7 if you are doing it via the XDA cradle.
maltloaf

Did you use XDAtools to copy direct to device
Thank you Maltloaf, when you upgraded your rom did you use XDAtools directly from PC to device or copy the file onto your SD/MMC card and use the bootloader program to load ?? If so maybe you can answer the problem I am encountering. Thanks john

i have flashed twice (had to go back to 2002 for a short while)
both times using the SD card/bootloader method and I transferred the file onto the card using xdatools in the xda/cradle

Thank you Maltloaf
Thank you Maltloaf this seems to be clearer now, but in the context of upgrading etc XDAtools is only being used to copy the file from source to SD/MMC card. I was under the impression that XDAtools did not require the use of SD/MMC card. But maybe it's a matter of finding out what works for you. John

well xdatools should be able to flash directly to the xda as far as i know but it's always the safest way to do it sdcard style

Thanks to all
My thanks to all you helped with my recent questions. Thanks John

Burning ROM - phone not working

Hi, I'm hoping to get some help with cooking and burning ROMs to my o2 XDA.
My original product specs are:
ROM Version: 3.20.06 ENG
Radio version: 4.21.01
I cooked and then downloaded 4.01.00 ENG from Lumpi Stefan's site, then ran the rom.exe file that it produced for me. Everything worked fine, and then I rebooted my XDA. Upon first boot the phone appeared to work, but after performing a soft-reset because the XDA froze, all of the phone functionality appears to be not working.
When I do a hard-reset I get: Wallaby Bootloader v6.22 - GSM OK which I think looks good as far as the phone functionality is concerned. Looks like it's the OS that's on the XDA which is causing the phone difficulties.
I read somewhere that if you burn any T-Mobile ROMs an SD card is *required* to reverse it and put a different ROM on the XDA. Well, the cooked ROM I downloaded is from T-Mobile - I didn't know this before I started!
I don't have an SD card, and am in dire straits about getting my phone to work. Is it possible at all to get this to work, or perhaps to go back to my original ROM (I backed it up to orig.nb1) using XDAtools. Anytime I try to burn the .nb1 file back to my XDA it fails. Or is the ONLY way to get an SD card and use the Bootloader technique? I even tried downloading the 3.17.03 ROM upgrade directly from the o2 sitebut it fails.
Any help will be GREATLY appreciated.
Thank you.

[qoute]I read somewhere that if you burn any T-Mobile ROMs an SD card is *required* to reverse it and put a different ROM on the XDA. Well, the cooked ROM I downloaded is from T-Mobile - I didn't know this before I started![/qoute]
this is true with 4.00.10 and 4.00.16 but not anymore with 4.01.00.
if your xda still can be connected to activesync, try to reflash the ROM.
Otherwise, you have to use the SD flashing method.

[qoute]I read somewhere that if you burn any T-Mobile ROMs an SD card is *required* to reverse it and put a different ROM on the XDA. Well, the cooked ROM I downloaded is from T-Mobile - I didn't know this before I started![\qoute]
this is true with 4.00.10 and 4.00.16 but not anymore with 4.01.00.
if your xda still can be connected to activesync, try to reflash the ROM.
Otherwise, you have to use the SD flashing method.

Thanks, I will try. ActiveSync still works...
I notice you are running the same ROM version as me - sis your radio still work?

Can you verify that I am trying to Flash the ROM correctly?
1. Confirm that I have orig.nb1 - yes, it's there - backup of original ROM before I started this whole dilemma.
2. Ensure that XDA is Activesync'd - yes, as "Pocket_PC" - all working okay.
3. Right click on orig.nb1 and select "burn"
4. OSImageTool.exe then pops up and copies orig.nb1 to Programme A.
5. A DOS box then appears saying "ERROR: GetConnectionType - A
ote host. error getting connectiontype".
6. Programme A then runs and after pressing "next" a couple of times, I get an error - "Error 011: Cannot execute the remote communication program. Pleace make sure that the USB cable is properly connected."
And that's basically it.
I have tried different variances of this, but all without success.
Help!
BTW, I'm logged in to MSN Messenger now, could you let me know when you're online - or anyone else, for that matter. My address is [email protected]

This message means that the current ROM in your XDA can't be flashed through Program A ... not a big issue, for unknown reason it happened with me few times ... but now you have to use SD card to flash your ROM.

Here is an update...
I have played around some more with the XDA with no success. I have now bought a 64MB SD card and am unsure as to how the ROM image on my PC gets onto the SD card. This is how I have been doing it:
1) Insert SD card into XDA
2) Place XDA into cradle
3) XDA then ActiveSync’s to the PC
4) Run OSImageTool.exe and select the following –
a. Source: “C:\Documents and Settings\Paul\Desktop\orig.nb1”
b. Destination: “XDA SD card slot – unknown size”
5) Then I press “copy” and I see the progress bar go across to 100%. After this appears to finish, the program just sits there not telling me it’s finished. I assume that it’s all okay and I then close the program
6) Take XDA off cradle and hold power button down whilst doing a warm-reset
7) The following appears: “Wallaby Bootloader v6.22 – GSM OK” – nothing else happens, and from what I have read it is supposed to ask if I want to perform a ROM upgrade. However, I can get into the diagnostic and flash tools by pressing the action button etc, but nothing is in there to upgrade the ROM.
Does the fact the OSImageTool destination says “XDA SD card slot – unknown size” matter? I’m assuming not because when I have transferred the ROM using the above steps, the XDA asks if I want to format the card; meaning that the transfer worked okay. Do I have to have an SD card reader/writer on my PC to get the ROM onto the SD card?
I have read a little about a Bootloader patch – do I need to run this, and how do I get it onto the XDA – using the same method?
I would be very appreciative of any help that can fix this, as all I want to do is get my three-day old XDA working again!
Any other comments and help in relation to solving this hair-challenging issue would be great!
Thanks,
Paul…

Ok ... from what you wrote it seems your doing it correctly. However, I have doubts on the file orig.nb1 you are using ... maybe it wasn't copied properly.
Try to cook any ROM (TMO 4.01.00 is good) at Stefan kitchen and you can cook it as .nbf or EXE then extract the .nbf file using winzip or winrar.
Follow the same steps and let me know.
Good luck ...

Is bootloader v6.222 okay - will it allow me to overwrite my current ROM with this new ROM that you are suggesting? I have read that I may have to downgrade my bootloader to do the SD ROM writing thing.

I can't confirm that my self ... I used SD with 5.17 and 6.22 without problems but maybe it's my luck
Cook the 4.01.00 as EXE and try it as is or extract the .nbf file and use the SD method.

Okay I'll give that a go now... Will let you know how I go...

Nope - didn't work. I'm not getting a screen in the bootloader to update the ROM via SD - if I press the action button I get into dignostics...
Is this a bootloader issue, and if so, how do I downgrade?

Also just tried the following:
C:\Program Files\XDAtools\binaries>pnewbootloader bootloader_v5_15.nb0
And got the following error message:
Unable to find flash info offset, cannot disable bootloader writeprotect
Any ideas?

I don't get it ... you cooked and downloaded and tried a new nbf file for TMO 4.01.00 in less than 15 minutes ??!!!!
what is the nbf file size ??

Yes, I used Winzip to extract NK.nbf. It is 31,745kb.
I am now cooking on Lumpi's site a zipped NK.nbf file and will try that too...

Unlock SIM (Pocket PC Phone Edition)

Hey Guys,
My friend gave me a pocket pc with phone edition. When I tried to insert my sim card it asked me to the unlock code. My friend used this mobile for T-Mobile sim card in US.
Here is the ROM Versino: 4.01.16 ENG
ROM Date: 02/04/04
Radio Version: 6.25.02
Protocol Version: 324e4
After typing my PIN code it asks me to unlok the sim.
What can I do to resolve this problem
Thanks,
bm_t

Try the XDA unlock tool. You can find it on the website.
I have unlocked tmobile using that tool. However if it gives you problems unlocking.... I would suggest installing the xda rom and then try.
I am going to unlock a new Tmobile on tuesday. If this does not work you can get in touch with me on any chat and I will walk you through the process.
lemme know if you need anymore help.
Cheers!
Diki :lol:

Thanks Diki for your reply.
I have tried XDA Unlock and XDA2Unlock but failed.
When I tried XDA2Unlock it reports some error like COM2 0X..... (Hex #)
You have seen my ROM version and Radio version. How do i install new xda rom .
I only have the USB cable. Do I need a serial cable?
thanks

As much as i know, it will not work for you to unlock your device.
xda2unlock is only for the second Version of XDA (MDA II, MDA II,...), so you have to use the xdaunlock tool.
there are several postingsa, that unlocking will fail with your radioversion.
Maybe they have changed the code in this version.
There is a guy (cgigate) that promise he is able to repair and unlock all devices, but personal i don't believe this.
i believe changing ROM will not change anything. But you can try it. Look for the XDA deelopsers special ROM 1.2 or use the 3.17.03 ROM and the unlock tool.
But flashing a device could be dangerous.
Changing the radioversion is also possible, but the risc to end ata paperweight is very high...
Stefan

Hello LumpiStefan,
Where do I found 3.17.03 ROM. I have tried in your site(Romkitchen) but I couldn't able to download.
http://lumpistefan.dynsdns.org
After selecting the ROM and some additional softwares, I clicked the 'Build Rom Now' Button but nothing comes.
Can you help me with this?
thanks
bm_t

bm_t said:
Where do I found 3.17.03 ROM. I have tried in your site(Romkitchen) but I couldn't able to download.
http://lumpistefan.dynsdns.org
After selecting the ROM and some additional softwares, I clicked the 'Build Rom Now' Button but nothing comes.
Click to expand...
Click to collapse
Cooking process works well for me.
Maybe you have to wait a few minutes more.
Cooking process can be up until 5 minutes.....
Otherwise try again the Build Rom now button....
HTH
Stefan

Hello LumpiStefan,
I have tried serveral times but I couldn't able to download the ROM.
Do I have to register or download some other application to download your ROM.
Here is what I did to download the ROM
After Entering ur site LumpiStefan, http://lumpistefan.dynsdns.org
I clicked PPC 2002 and select 3.17.03 with XDA developers (Default ).
and clicked 'Build Rom Now' button.
When I clicked 'Build Rom Now' button, the only thing that changes is the graphs (right hand side of the page). I have tried many times but only the graphs changes.
Did I miss something (some procedures or .....)
thank you for ur time

After clicking cook rom you should have the option to specify where to download it.

Hello,
I have 128 kbps line but couldn't able to download the rom for the site.
http://lumpistefan.dyndns.org/
It doesn't respond the site except changing the cpu ... graphs
Is there any other site to download 3.17.03 Rom for XDA-I.
thanks

bm_t said:
I have 128 kbps line but couldn't able to download the rom for the site.
http://lumpistefan.dyndns.org/
It doesn't respond the site except changing the cpu ... graphs
Is there any other site to download 3.17.03 Rom for XDA-I.
Click to expand...
Click to collapse
You can try http://xda.weblink.net or use http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe to download the xda developers ROM based on 3.17.03 including the unlock tool....
I think you're the first guy that has problem to download a rom from the kitchen.
What for browser are you using? Have you ever tried another ROM?
HTH
Stefan

Hi LumpiStefan,
Thanks for ur reply.
I have checked both sites (i.e http://lumpistefan.dyndns.org/ and http://xda.weblink.net)
I have tried also another rom but the same problme. I have tried to download the rom from Linux and win XP pc.
I have aslo downloaded http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
but when I executed this file from my win XP machine ( I have connected my XDA through USB cable and installed ActiveSync 3.7.1) it reports error (something like Unable to find the XDA Please connect Serial/USB cable)
I'm really really stuck with this phone
thanks

it seems that you don't followed the correct procedure.
This link it's a wizard and could help you: http://wiki.xda-developers.com/wiki/UnlockWiz

Hello Folks,
I have seen a post in form.xda-develpers.com that this file http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
will not work because my phone (i.e PC2003) (the adaptROM is not compatible with PC2003)
He said the only option to Unlock the SIM is only using this xdarit.exe application. Since my SD is 8 MB, I can't load the ROM with this space.
As far as I have seen the situation, my only option is getting the serial cable.
Do you have any suggestions?
Thanks

bm_t said:
As far as I have seen the situation, my only option is getting the serial cable.Thanks
Click to expand...
Click to collapse
Get the serial cable.

SIM Lock
Hi,
Every time I run "XDA-developers-SER-v12.exe" I get a message, error getting data, and then the program close.
plz advise. thanks

'error getting data'
I had the same error. I read somewhere on one of these posts that
there was some capatibility between Programme A.exe and Activesync 3.7.1.
Apparently you could downgrade your activesync version or use XDATools to push the nk.nbf file down to an SD card and flash from there. Use winzip or something else to extract all the files in the SER installation exec. In the English folder you'll find the NBF file to use.
In XDATools put this as the Source, target is the SD card in the device. Go to bootloader utilities (power+soft reset and maybe press contacts) and depending on your bootloader version it may detect you have a flash image on your SD card. Follow the instructions on the pda to flash the rom.

Hi rhodwyn,
Thank you for your support, but still I cannot downgrade my "BootLoader" to "5.15" with every boot I'm geeting "5.22" even after loading the spocial edition ROM.
Also, I cannot find (XDArit & Wallaby bootloader version 5.15 files) in the neet.
Please advice.
Thanks.

Hi ALL,
I did unlock (SIM LOCK) my phon.
Thanks you all for help & support.