Database Users

MDA II Cingular GPRS settings

I just bought a (German ver.) MDA II. I have followed every tutorial I came across to set my phone for Cingular GPRS. I've signed up for the internet service through Cingular so this thing should work.
When I try to connect to the GPRS it says:
Cannot Connect
-------------------------------
Cannot connect for unknown reasons....
What can I possibly be doing wrong? Trust me, I have tried every different setting I ran across i.e. WAP, Data, Dialing Rules.
I know nothing (yet) about flashing or editing a ROM but intend on learning later. Is it possible that someone out there has a pre-configed ROM that I could flash this thing to solve _all_ of my problems?
Although this phone is from Germany, I believe the company I bought it through flashed the ROM for me to the English version??
ROM Version: 1.60.00WWE
ROM Date:12/03/03
Radio Version: 1.06.01
Protocol Version: 1337.16
ExtROM Version: 1.60.06
Is it my settings? Is it my ROM version? Am I holding my tongue right?
I beg and plead for your help.
Thanks!

Be glad to help. here are the settings I have discovered after much searching:
PROCEDURES FOR USING IMATE ON CINGULAR NETWORK
Goto Start->Settings->Connections
Click CSD Line Type:
Date rate: 9600 .v32
Connection element: Non-Transparent
Click OK
Click GPRS Setting
Make sure PAP Authentication is selected
Click GPRS-Setting
Make sure Class 8 (4R1T) is selected
Click OK
Now we're ready for the settings
Click Connections
Under My ISP Select Add a new Modem Connection
---NOTE--- I've been unable to get this working since adding the Media works package------
Name: Cingular GPRS (Or whatever you want)
Select a Modem: Cellular Line (GPRS)
Click Next
Access Point Name: isp.cingular
User Name: [email protected] (MUST BE UPPERCASE)
Password: ZXY203DC9K0402 or
Username: [email protected]
Password: CINGULAR1
Click Finished
You should now be at "My ISP" and have "Cingular GPRS" or similar listed for the name
Click OK
-------------------------------------------------------------
You should be in the main connections window
Under My Work Network, Click Add a New Modem Connection
Hit New
Name: WAP (Or whatever you want)
Select a Modem: Cellular Line (GPRS)
Click Next
Access point name: wap.cingular
Click Next
User Name: [email protected]
Password: CINGULAR1
Click Next
Click OK
You should be in the main connections window
Click Set Up My Proxy Server
Check both boxes BUT LEAVE the Proxy Server Box empty
Click Advanced
Type 66.209.11.61 in the WAP and Secure WAP Boxes
Click OK
Click OK
Click OK
Now you should be back in the general Communication settings
Start Inbox
Click on Accounts
Select Accounts
Select * SMS
Make sure the number is +13123149810
Click OK
Click OK
On your today screen, hit the "No new MMS Message"
Select Tools
Select Options
Select the Servers Tab
Click the Screen and Select New
Server Name: Cingular MMS
Gateway: 66.209.11.61
Server Address: http://mmsc.cingular.com
Click Ok
Select the Preferences Tab
Under Connect Via, Make sure My Work Network Is Selected
Under Connect to Server, Cingular MMS
Click OK
To use CSD(Circuit Switched Data) on the Imate, here's the procedure:
For WAP over CSD
Start->settings->connections->connections-<add a new modem connection
call it wap-csd (or whatever)
cellular line
next
number is 1-415-244-1012
next
name ->[email protected] (all caps)
password->CINGULAR1 (all caps)
finish
For Data over CSD (on or off net)
Start->settings->connections->connections-<add a new modem connection
call it data-csd (or whatever)
cellular line
next
number is
1-847-254-9270
next
name ->[email protected]
password -> ZXY203DC9K0402
finish
You should now have 4 different connections
Data-gprs
wap-gprs
data-csd
wap-csd
Under "normal " use the WAP setting is used.

cmccarter - Thanks for all of the info. I am much closer than before. I can connect via WAP now and my MMS is now configured correctly. THANKS!! BUT!!! It's still not allowing me to connect via GPRS. It still says that it cannot connect for unknown reasons. What else could I check??
What do you mean you couldn't get it to work after adding the media works package? Which connection stoped working?
Which brings me to another question; why would I use WAP over CSD or Data over CSD?? I don't know the difference. Heck, I don't even know the difference between WAP & GPRS. Can you tell I'm confused?

I used Afrocream's GPRS settings on this thread:
CLICK
They're almost identical, but what the heck. Works for me. Be careful of your entries and the CASE. UPPERCASE must be uppercase.
Also, be aware that (I believe) the SMS dial number *might* be regional. My phone uses a different number.

For more info on the differences between CSD & GPRS go to:
http://www.howardforums.com/
In the Cingular Message area there you will find lots of info.
I was unable to get the connection to isp.cingular to work and after talking to the CSRs at Cingular determined that it was not included in the Media Works package... no great loss as you can apparently tether to wap.cingular just as well. (tether= connect your pc via your phone using a cable, bluetooth or IR)

I might be mistaken but I have the Mediaworks package and, other than WAP sites, I'm connecting to isp.cingular.

re:
i just switched over to cingular and for the life of me cannot connect ot gprs or wap. i followed the direstions to the letter and im stuck please help...

seattleboi -- from what you posted it's very difficult to know what's going on. What happens when you try to connect? Are you sure there's no error in your entries (a slight typo, an unneeded space, etc?)
Are you sure that you have GPRS enabled with Cingular and that there's no problems in your area? Have you slipped the SIM card into another phone to confirm this?
Since these settings seem to be working for most of us (with iMate and other phones) there's no easy way to figure out why it's not working for you.

i did, it works now, but for some reason like every 4 hours it will not connect even rebooting several times, i end up deleting the connection settings and end up redoing them and rebooting a couple times to get it to work, my suspsicions are starting to fall on the rom image that im using, maybe skewring them up, the Rom i am using is the latest ATT rom WM 2003 that i made in the kitchen, so later on today i guess i will have to try the t-mo rom and see is that is giving me problems, (Evidently the night i did try to connect the GPRS network was down) and yes i did try with another phone i have a 3650 at my fingertips from Cingular to try. 8)

T-Mobile USA, iMate Jam and GPRS. HELP!!!!

Hey there,.....ultimate noob posting here but here goes.
I have an unlocked iMate Jam on the T-Mobile USA network. I have upgraded my plan to include the internet on this phone. These are my phone settings/information:
ROM Version: 1.11.00 WWE
Radio Version: 1.11.00
Protocol Version: 1337.42
ExtROM Version: 1.11.210 WWE
Model #: PM10C
The problem is that I cannot connect to GPRS to get or get MMS. I have gone through the connection settings with t-mobile reps about 20 times and I'm SURE they are correct.
Does anyone know what's going on here? Is it my ROM version. One t-mob rep seemed to think that my ROM version was unsupported. Has anyone else had this problem. Can anyone shed any light? Thanks.

By George, I think I've got it...
Hey, I think that one of the other guys on the forum, figured it out. Check out this post. It is working great for me. I love this forum!!!!!!!!!
http://forum.xda-developers.com/viewtopic.php?t=25662&highlight=tmobile+usa+gprs

I also have an Imate-Jam and I'd like some help from you guys sothat I can read and write chinese for text messaging... I know that there are softwares like monster chinese or CE-star about US $40, is there any alternate way instead of buying the software? since I'm not a bigpocket kinda person please help... thank you

GRRRR
Since the post from Elite has NOTHING to do with the subject of this forum, we are going to ignore it and continue to talk about this issue at hand.
FYI- After my last post, my GPRS internet seems to be working fine. I have to soft reset every once in a while but considering the level of functionality that I have had up till now, I'll take whatever I can get.
The only obstacle left for me is MMS. The iMate notifies me that an MMS message is available for download but when I click on download, it attempts to open my WAP connection (T-mobile rep said that MMS always uses a WAP connection) the connection says that it connects (after looooonnnnggg time) and then says 'receiving' but it NEVER downloads the rest of the MMS message.
All I want to know is if any other T-mobile USA customers have had similar problems. If so, is there any info you can provide me that would help me fix this for all of us.

Ok well here is the 411 on gprs and mms on T-mobile I have run and used both since the xda II was out. I now have a xda IIi and confirm everything works fine. You need to make sure you have the right internet or data service enabled before try! They have two data services. One is just wap which does not give you full access to the internet as in open ports on there network. The other is unlimited internet which is like 19.99. That gives you full access. Configure your device as the following and you will be fine for mms. Also you need your apn correct. Usually on tmobile its internet2.voicestream.com or internet3.voicestream.com. You can call in and ask.
MMS Setting are as follows on any pocket pc phone.
1 Under My Work Network, select “Add a new modem connection”
2 Enter a name for your connection; I used “MMS”
3 From the Select a modem drop down choose Cellular Line (GPRS)
4 Tap Next
5 In the text box labeled (Access point name) type in wap.voicestream.com
6 Tap Next
7 Leave the User name, Password, and Domain fields blank
8 Tap Finish
9 Tap the Proxy Settings tab
10 Place a check in both boxes
11 Leave “Proxy server” blank
12 Tap Advanced
13 Leave HTTP and Socks Server fields blank.
14 Enter 216.155.165.50 for your WAP server. Port # is 9201
15 Enter 216.155.165.50 for your Secure WAP server. Port # is 9201
16 Tap OK twice
Now go to your MMS program and set it up, create a new server and I called mine T-Zones. Here are those settings.
Server Name: T-Zones
Gateway: 216.155.165.50
Port: 9201
Server Address: http://216.155.174.84/servlets/mms
Tap ok
Now go to preferences and enter these settings,
Connect Via: My Work Network
Connect to Server: T-Zones
(check the box to retrieve messages immediately)
And it should work.
Enjoy!

Cingular 8125 on AT&T

Can someone point me in the right direction I've doen numerous searchs and talked to tech support (useless) . I have a 8125 that I picked up, although I am a AT&T sim card user (our company hasn't upgraded yet) so I unlocked the phone and it works great. although I can not access mmode or anything email or Internet related unless using wifi.
Can someone point me in the right direction for some instructions on how to get this thing set up to work with the legacy AT&T wireless system?

You need to manually enter the AT&T GPRS and MMS settings.
Call up AT&T and ask for the necessary information. They'll give it to you.

PM me you're email address I have the cab file that I can send to you.

gamescan said:
You need to manually enter the AT&T GPRS and MMS settings.
Call up AT&T and ask for the necessary information. They'll give it to you.
Click to expand...
Click to collapse
Well they don't exist anymore and the guys at Cingular could only get me so far. that's why I'm looking around for it.
Mark, you have a PM, thanks in advance

Cab file didnt work Mark. Only change it made was resetting my today backround to the default. all the settings are still the same.
is there a list of settings or a walk through for setting it up manually somewhere?

It should have worked.
Here is what I have:
MMS Configuration
Retrieve Messages Immediately
Save Sent Messages
Servers
AT-T MMSC
10.250.250.100
9201
http://mymsc.mymmode.com
My Work Network
100k
Wap 1.2
My ISP
AT-T Internet
Cellular Line (GPRS)
Proxy - Proxy Name
Work Network
AT-T WAP
Proxy - Proxy Name
Proxy
This network connects to the internet
This network uses a proxy server
WAP 10.250.250.250 9201
Secure WAP 10.250.250.250 9203
Hope this makes sense.

Another option is to go to the Cingular web page and choose Support, Phone/Device Support.
Select the following:
Network: former AT&T Wireless"
Manufacturer: Siemens
Model: SX66
Use the information in Device Setup to configure the browser/internet and MMS settings. It won't match exactly because the SX66 is a 2003 device, but you should be able to figure it out.

Think I just found a form that can help: tmo MMS not working on 8125

Hello Everyone/Rambo6 ... I'm a newbie to this forum. Please help before me I give up on my 8125 ...
I have an unlocked cingular 8125 using tmobile service. I have not been able to get MMS to work yet (I'm pretty sure my settings are correct). I've been spending 3 days now on 4 different forums, but I still can't get an answer. I was really happy to see that Rambo6 (in one of the threads) got his to work, so I'm sure I've found the right place to get help.
I guess the questions are:
1) What am I doing wrong?
2) Do I need to flash with a TMO ROM? I tried to update the ROM from tmo website but I got an error, I think it was something like "invalid vendor" ... or something like that. I'm currently using the Cingular ROM. Phone & SDS works.
3) Does anyone have a step by step process on this? With pics would be awsome.
4) Is my phone not fully unlocked eventhough I can use the tmobile SIM for phone/SMS?
Here my ppc info:
ROM version: 2.25.11.1 WWE
ROM date: 5/11/06
Radio version: 4.1.13.12
Protocol version 4.1.13.12
ExtROM version: 2.25.102
my settings was based on (from tmo website):
wap.voicestream.com
216.155.165.050 in the Gateway field
8080 in the Port number field
http://216.155.174.84/servlets/mms in the Server address field
WAP 2.0
I did spent time reading through this forum (and a lot on other forums). I apologize if this has already been answered. I did honestly tried to search 1st.

bump !
i myself have been searching aswell looks like its a common issue with the cingular 8125 .

um.. did you edit the media net connection to point to tmo? im not clear on the tmo settings, but i know on cingular, the mms settings uses the media net connection, if i have my edge on MY Isp it fails (im assuming it needs that proxy from MEdia net) so basically you will need the internet settings as well...

I used the following settings from the tmobile website. I have a feeling I need to use the tmobile ROM. I'm a little worried because I have not found on this forum how to verify if my device is actually cid unlock. From what I can tell I have a G3 (IPL/SPL 2.25) chip so there is an unlock tool for that. I just need a way to verify that cid unlock actually worked.
Anyway, I took a risk and tried to flash with the tmobile ROM and got "Invalid vendor ID". I've been brousing this forum for this, but haven't found an answer yet. I guess if some one know please tell me now ... I've been spending 3 days now (actually 4 now) reading & reading & reading. Would be nice to get an answer now. What's wrong? Do I need a tmobile ROM? Thanks!!!
1. Tap Start.
2. Tap Settings.
3. Tap on the Connections tab.
4. Tap the Connections icon.
5. Tap Add a new modem connection under T-Mobile GPRS.
6. Enter PictureMessaging in the Enter a name for the connection field.
7. Tap to select Cellular Line (GPRS) from the Select a modem drop down list.
8. Tap Next.
9. Enter wap.voicestream.com in the Access point name field.
10. Tap Next.
11. Tap Finish.
Setting up the MMS profile
1. Tap Start again.
2. Tap Messaging.
3. Tap Menu.
4. Tap MMS Configuration.
5. Tap the Servers tab.
6. Tap New.
7. Enter PictureMessaging in the Server Name field.
8. Enter 216.155.165.050 in the Gateway field.
9. Enter 8080 in the Port number field.
10. Enter http://216.155.174.84/servlets/mms in the Server address field.
11. Tap to select T-Mobile GPRS from the Connect via drop down list.
12. Tap to select WAP 2.0 from the WAP Version dropdown.
13. Tap OK.
14. Scroll to PictureMessaging and tap Set As Default.
15. Tap OK.
The new MMS profile is now configured and ready for use.

Shoganmark,
I read your reply but I didn't absorve (spelling?) it very well. I'm a little tired ... have not had much sleep. After reading your reply again, I think (maybe) I know where your getting at. I'll think about it a little more to make sure I really do understand what you're saying before I ask anymore dumb questions. Thank for your reply.

goXDA said:
Shoganmark,
I read your reply but I didn't absorve (spelling?) it very well. I'm a little tired ... have not had much sleep. After reading your reply again, I think (maybe) I know where your getting at. I'll think about it a little more to make sure I really do understand what you're saying before I ask anymore dumb questions. Thank for your reply.
Click to expand...
Click to collapse
wasnt really a dumb question... just had to get it figured out.. i am cingular and not sure what the tmo connections look like, but i assumed they worked in the same manner as cingular, i didnt know if there were 2 different edge settings on tmo like cingular.. and i may not have explained it the best, but i was trying to explain how cingulars connection worked so that maybe in understanding that it would help your mms problem...
Have you gotten it to work yet?

let me try to break down how cingular's works and make it a little more understandable, hopefully this will help you figure your tmo problem out..
On the connections tab cingular has 2 gprs settings
MEdia Net (uses a proxy server)
MY Isp (does not use a proxy)
Now by default cingular is set to MY Isp (due to wifi, wifi will not work if set to MEdia net due to the proxy server)
Then of course in the MMS folder settings is the MMS connection settings...
Now if the phone is set to my isp it will not send an mms message (im guessing due to the proxy server.. sounds like a pain in the a$$ yet?)
in order for me to send an mms i have to set the phone to MEdia net (im guessing again due to proxy)....

Hello ShogunMark,
Unfortunately I was NOT able to get MMS to work. I tried soft reset & power
down also. Anyway here's what I've done so far:
1) For Connections I use MEdia Net (setting up for internet)
based from: http://tmobileus.wdsglobal.com/wap?...mobileNumber=&captchaEnabled=true&service=wap
Name for Connection: PictureMessaging
Select a modem: Cellular Line (GPRS)
Access point: wap.voicestream.com
PROXY:
Proxy Server: 216.155.165.050
Port: 8080
This nework connect to the internet: checked
This network uses a proxy ....: checked
# I see the following but didn't change it ... not sure what to
# set it to (and tmo instruction didn't say anyting about this)
Socks: localHost: 1080
2) For MMS profile:
based from:
http://tmobileus.wdsglobal.com/mms?...mobileNumber=&captchaEnabled=true&service=mms
Server name: PictureMessaging
Gateway: 216.155.165.050
Port Number: 8080
Server Address: http://216.155.174.84/servlets/mms
Connect via: MEdia Net
Sending size limitation: 300k
Wap Version: 2.0
There's gotta be a stupid little thing I'm overlooking ... I'm just out of ideas now. This does not have anything to do with which ROM (Cingular vs TMO) correct? I don't think so, but then again there may be something hidden in the ROM.

goXDA said:
Hello ShogunMark,
Unfortunately I was NOT able to get MMS to work. I tried soft reset & power
down also. Anyway here's what I've done so far:
1) For Connections I use MEdia Net (setting up for internet)
based from: http://tmobileus.wdsglobal.com/wap?...mobileNumber=&captchaEnabled=true&service=wap
Name for Connection: PictureMessaging
Select a modem: Cellular Line (GPRS)
Access point: wap.voicestream.com
PROXY:
Proxy Server: 216.155.165.050
Port: 8080
This nework connect to the internet: checked
This network uses a proxy ....: checked
# I see the following but didn't change it ... not sure what to
# set it to (and tmo instruction didn't say anyting about this)
Socks: localHost: 1080
2) For MMS profile:
based from:
http://tmobileus.wdsglobal.com/mms?...mobileNumber=&captchaEnabled=true&service=mms
Server name: PictureMessaging
Gateway: 216.155.165.050
Port Number: 8080
Server Address: http://216.155.174.84/servlets/mms
Connect via: MEdia Net
Sending size limitation: 300k
Wap Version: 2.0
There's gotta be a stupid little thing I'm overlooking ... I'm just out of ideas now. This does not have anything to do with which ROM (Cingular vs TMO) correct? I don't think so, but then again there may be something hidden in the ROM.
Click to expand...
Click to collapse
that looks right... tonight when i get home if i am not to tired i will download a tmo rom and check out the ext rom to see what files it uses to install the settings...

Hello ShogunMark,
Unfortunately I was NOT able to get MMS to work. I tried soft reset & power
down also. Anyway here's what I've done so far:
1) For Connections I use MEdia Net (setting up for internet)
based from: http://tmobileus.wdsglobal.com/wap?...mobileNumber=&captchaEnabled=true&service=wap
Name for Connection: PictureMessaging
Select a modem: Cellular Line (GPRS)
Access point: wap.voicestream.com
PROXY:
Proxy Server: 216.155.165.050
Port: 8080
This nework connect to the internet: checked
This network uses a proxy ....: checked
# I see the following but didn't change it ... not sure what to
# set it to
Socks: localHOst: 1080
2) For MMS profile:
based from:
http://tmobileus.wdsglobal.com/mms?...mobileNumber=&captchaEnabled=true&service=mms
Server name: PictureMessaging
Gateway: 216.155.165.050
Port Number: 8080
Server Address: http://216.155.174.84/servlets/mms
Connect via: MEdia Net
Sending size limitation: 300k
Wap Version: 2.0
There's gotta be a stupid little thing I'm overlooking ... I'm just out of ideas now. This does not have anything to do with which ROM (Cingular vs TMO) correct? I don't think so, but then again there may be something hidden in the ROM.

Shogunmark,
Thanks 4 your help. Do get some rest 1st. I really appreciate your help.

goXDA said:
Shogunmark,
Thanks 4 your help. Do get some rest 1st. I really appreciate your help.
Click to expand...
Click to collapse
help is what this community is for... no need to thank me

I'm not a WM5 and HTC Wizard expert yet (had the device less than a month and its my first WM device) so if i don't help i'm sorry, but i'll try anyways.
From what i know WM dosen't include MMS capabilities built in so my Wizard, T-Mobile MDA (US), uses something from ArcSoft to do that, i'm sure yours does too as HTC probably chose that. Have you looked into the settings for MMS Composer (the stuff by ArcSoft)?
The easiest way to do that i found was simply open up Pocket Outlook like you do to send an MMS -> Hit Menu -> Tools -> Options -> Tap "MMS" (may be named something else i can't say for Cingular's ROM) -> Hit "Servers" tab -> Ensure that new connection you set for MMS as T-Mobile told you via their site is the one MMS composer is set to use.
I can't imagine why it wouldn't work if that's set right... But post if that helps at all or not
Don't get rid of the 8125 though we'll all crack at it till it works

Hello Frazell,
You are correct about Arcsoft ... I did noticed that MMS uses Arcsoft (I saw that in the "About"). I went through the setup as stated at tmobile website already ... so I'm surprise too why it didn't work. Maybe this will give my helpers some more hints ... when I hit send:
1) The 1st pop-up widow is: "Connecting to PictureMessaging, Connecting to
GPRS" I didn't see any error here so I assume it's ok.
2) On top of the today screen, I see a yellow envelope with a gree arrow.
I assume that means it's trying to send.
3) After a little while, I see "unable to send message" pop-up.
4) Now, if I got to the comn manager, I see the "Data Connection" is active.
I think it turns on when I send a MMS. If this is true, then this connection
being on means I can get a connection via GPRS?
5) Another note that I don't think I've mentioned. I am using the prepaid
t-mobile plan. MMS is suppose to be provided with the prepaid plan
(25cents per pic), so I'm not sure if this is a problem. I've already
checked with t-mobile that SMS & MMS are activated on my account.
ps. I've been searching on differnet forums (howardforum, pocketpcaddict ....), and I see some other people have this problem also. Most of the posts I see never had a reply, so I don't know if they solved it or not.
1 more edit to add: Both my wife and I have the same phone with the same problem, so I don't think it's a hardware problem.
(edit: fixed spelling)

with prepaid can u browse the internet....... if not u will not b able to send mms messages

Yes, prepaid can have internet access (it'll be expensive thouth). Here's the service listed by t-mobile
Included services
* Nationwide long distance (including calls to Alaska and Hawaii)
* National roaming on the T-Mobile USA network
* t-zones (free shopping for HiFi Ringers, MegaTones®, wallpapers, and more)
* VoiceMail, caller ID, call waiting, three-way calling*
* Free e-mail address ([email protected])
Other services
* Text messaging ($0.10 to send, $0.05 to receive)
* Picture messaging ($0.25 to send or receive)
* Download ringtones and wallpaper (prices vary)
* Download games and applications (prices vary)
* 411 & More directory assistance ($1.49 per call plus airtime)
* International dialing to over 150 countries (international rates apply)

im downloading a tmo us rom now... gonna pick apart the ext rom and see whats there.. hopefully i can come up with something to help you guys

ok, i found about 5 necessary cabs in the ext rom.. one makes the mms folder and some other reg settings, the rest makes the connections between internet and MMS.. i put a config text inside to show the order to install the cabs.. then reboot.. see if this solves your problem

Shogunmark,
I was not able to install the 3rd cab ("P_Generic_Conn_Settings.CAB") ... Got an "unsuccessful" installation. Should I continue
to install the rest?

my port is 9201 other than that everything else looks the same.

GPRS settings for Suncom

I have a At&T 8525 that I have unlocked to use with Suncom service in USA but I am unable to access the web and I am looking for the correct settings to do this. SUncom will not give the settings to me, also if possible the directions to install if settings are available-thanks

naacdw said:
I have a At&T 8525 that I have unlocked to use with Suncom service in USA but I am unable to access the web and I am looking for the correct settings to do this. SUncom will not give the settings to me, also if possible the directions to install if settings are available-thanks
Click to expand...
Click to collapse
Give this a try. It doesn't have the 8525 listed (of course). But I'm sure you can choose one of the other devices and the info should be somewhat standard.

gprs settings for suncom
I am using an HTC TyTn, it is very similar.
the settings that i haqve gotten to work after much trial and error are as follows.
make a new connection called "internet"
Cellular line GPRS
access point name: mobileinternet
user name, password, and domain are blank
and thats it.
MMS settings are:
create a server i called it suncom mms
gateway: 66.150.33.115
port:9201
server address: http://mms.suncom.net:8088/mms
connect via: i set to my isp (im not sure if this matters but it is working)
wap version: WAP 1.2
The wap version and port number are fixed on my phone. I have found that the port number is more inportant than the wap version.
I hope this helps.

thanks for the settings but I am still unable to send MMS --I set the WAP as the gateway #is that the correct place to enter it

Hi I have a Tytn II with Dutty's WM6.1 Official UC 5.2.19199 RTM
and I want to use these settings for the MMS but I don't know how to create the server.
I've looked through the phone but can't find it.
Can anyone help me out?

1 thing he messed up on..on the connect via dont put " my isp" put the internet