hi ppl!
i searched the forum as i think that question has already been answered, but couldn't find it.
as i own a mda1 and have a "car kit" for it (from brodit.se) i wanted to know if the serial/power connector of the mda2 is located exactly at the place as with mda1.
in short: can i use the sync cradle of the mda1 with mda2 and vice versa?
is the pin layout the same?
thanks for your answers (or link to a page where this is answered )
regards ize|man
Yup (I think)
I have used a serial cradle for the XDA1 with an XDA2 sucessfully, so you should be OK.
Lee.
Related
Anyone any idea where I can get some info on the Orange SPV1000 ,i.e Rom upgrades etc.
Thanks....B :?:
If you search this forum you will find most things you need to know. If you are looking for ROM upgrades, have you tried the official upgrades from the orange website? If you want any specific information, just ask and you will probably get an answer from somebody!
Charger question
Thanks Findus,,,
Do you happen to know will my XDA1 USB car charger do the M1000 ??
well i use my old xda1 cradle for my xda2 and it both sync and charge so if the car charger use the same connectors then it too should work
Hello, this is my first post, :roll: and as you can see in the topic it's my first himalaya, i have bought a used himalaya (M1000) A.K.A. XdaII with a broken screen , i have bought one Digitizer & LCD screen so i can't wait until it arrives so that i can play with it .
I have found this site when i was looking for a way to open the Pda, so i registered and i have found one huge comunity that i am glad to be apart, hope i can help somebody later when i know a bit more about this awsome machine.
So i would like ask for help to all you guy's and gal's, what should i install when i have repaired the Pda? What O.S. (wm 2k5 or wm 2k3 se), what cool apps and i am thinking of buying an sd card for wireless (to do a bit of war driving, and surf the net at home) so i would also like to know what kind of sd card are compatible with the himalaya, i have read that the scandisk with 256 mg isn't compatible in the 2k3 se but is it compatible in the 2k5 :? ??
Well thank's to all that read this post !
EddiePT
hiho everyone,
im quite in a little trouble with my alpine aka xda2i.
first of all i owned the old Himalaya Device and also the o2 carkit. no problems so far. now i "updated" to the xda2i and now its not possible to use the carkit as it was designed for, handsfree phoning... i hear the ones that calls me but they cannot hear me, i checked the micro but that is still ok. So maybe someone owns or knows where to get the connector pinout from an Alpine. then i can compare it with the Himalaya pinout. maybe they just changed 1 or 2 pins.
Second thing i want to know is if anyone knows how decode the Alpine ROMs cause i always get an password error on ER2003Edit..
hope someone can help me out
Puschel
Hi ppl, have external GPS and travel charger for Wallaby. They cable connects to the port on the bottom of the wallaby, since Im considering the buying of the 2020 maybe someone know is the connector on the bottom compatible so I can use those accessories on 2020 too ?
Tnx !
i could use my cradle from my wallaby with my himalaya without any problems it was a better cradle then the himalaya one anyway
to be sure you can take a look at wiki for pin out for the 2 devices
Thank you Rudegar, Stefan answsered on separate thread that everythings just fine, I can use GPS and charger.
thanks a lot & best regards !
Hello, Mr nooby here.
Looking at the threads for upgrading everyone seems really nice and helpful, my brain is saying to me "you can do that".
But I have a couple of questions before I do, as I haven't found any answers to these.
Phone is o2xda 11 (htc himalaya)
Running it says on the about screen microsoft pocket pc version 4.20.0(build 13252)
proc is intel pxa263
The questions:
Do I need to get it unlocked from o2 before upgrading to wm5/6?
I have the cradle but no power supply to the cradle. Do I need one? (the xda charges from cradle when plugged into the usb)
Thanks in advance for your help.
no you dont need to get it unlocked
but if u want to search for "xdadev_all_unlock-v1.6_138.exe" and run it on the phone.
not sure about the cradle but it should be evident if it wont work
ok thanks, all updated, just need to configure gprs for o2 now as its not working.
pcbreject said:
ok thanks, all updated, just need to configure gprs for o2 now as its not working.
Click to expand...
Click to collapse
just search google
thousands of people have asked the same thing.
when i got my xda II it was already unlocked