Just bought an XDA in Ireland, tried updating the ROM form the Irish o2 website and it stopped, said to restart and try again. Did this and constantly got a 'can't read ROM download and try again' Did this and repeated the same problem. Left it overnight and now when turned on the screen shows a 'haze' - nothing visable except black & whoe line. Tried updating using the SD boot and XDArit but same problem.
Anyone got any ideas?
Related
Hi, i have an xda, i got from ebay, I've had it a few days and its worked fine, i turned it off, and a few hours later turned it back on, and when it came to the Password screen it froze, i couldn't input anything.
So i tried doing a hard reset, but when i do, it brings up the wallaby boot thing, and then says GSM Error, so i reset the xda, and when it starts I get the O2 screen, then i get a white screen, with the keyboard icon int he bottom right, and it won;t do anything.
I'm wanting to try and re flash it by booting from the SD card, but i need the software and images to flash it.
Also, is it possible whiile rflashing to put pocket pc 2003 on?
Please Help thanks Andy.
Hi, I have this strange thing: with no reason, the startup menu, became a black square which freeze the system, no respond at all. Rebooting is working fine except when pressing the windows symbol for the startup menu. My problem is that if I try to upgrade to 4.02, or even the official rom from xda my orbit gets disconnected with no reason. " disconected ,check the cable and try again" is the message. I have tried on Vista, on XP, I have tried several roms but...the same thing, at the stage when i get the upgrade progress bar on the computer I get disconnected. Any Ideea why?
I am running the version 4.1 with cube, no problems until yesterday.
Thanks alot for your ideeas.
Did you remove your sd card?
IT WORKED!!!!
Thanks a lot, it was as simple as that, I have managed to load the O2 original Rom, from now it's all simple.Thank you for the idea!
hi all,
my jasjar had an error while upgrading to ranju 7.7,
i tried to reset, didn't came back,
hard reset neither,
i went to bootloader mode, i could,
i connected it again to the pc, it showed usb,
i tried to flash to Rom that was working previously it arrives to 7% than stops,
what should i do ...
i tried to flash with official rom, it says that the rom wasn't designed for this model, it has worked before...
please help...
Hi,
if you search in the ranju's thread there's the solution.
You could have the doc corrupted. Simply read the wiki,
you must use mtty to format your device and then reflash the rom you want (with radio rom also).
Had similar problem
upgrading Imate JasJar to Ranju 7.7, only at first it showed as success, then it started behaving funny during customization, then failed to customize, then got stuck on Windows 6.1 green flash screen and eventually refused to budge beyond blue Imate screen with versions info. I tried everything, a few dozens of hard resets returned me to the same problem, removing the battery didn't do much and mtty didn't show USB as available option, so couldn't even use that. I was pretty much stuck solidly and for a while. At my wits end I read that problems like mine are associated with DOC corruption and my JasJar is as good as dead, quite a few people suggested to those who are in the same position to throw their bricked babies away, as there is no economic solution apart from sending it for service where the corrupted chip may be replaced. What do you know, I followed wiki recommendation and entered a boot screen by pressing light power reset, then just flashed back to Ranju 7.6 and my JasJar was brought back to life!!! The update went without a glitch and everything is working fine. I guess I will keep the 7.7 on my O2 and 7.6 on my Imate for now, won't be risking an update anymore on the JasJar, don't think I have much hair left after all the pulling I did trying to bring it back to life. Hope this helps someone in the same predicament
jokove said:
hi all,
my jasjar had an error while upgrading to ranju 7.7,
i tried to reset, didn't came back,
hard reset neither,
i went to bootloader mode, i could,
i connected it again to the pc, it showed usb,
i tried to flash to Rom that was working previously it arrives to 7% than stops,
what should i do ...
i tried to flash with official rom, it says that the rom wasn't designed for this model, it has worked before...
please help...
Click to expand...
Click to collapse
does it turn on at all?
Does the device turn on at all after a hard reset?
Dude, I had a same problem it rectified though, check following of my blog...
http://jay-joshi.spaces.live.com/blog/cns!851D717EDFF14CEC!3258.entry
or
http://buzzdev.net/read.php?40,13307,page=1
Rarest_Kind said:
Dude, I had a same problem it rectified though, check following of my blog...
http://jay-joshi.spaces.live.com/blog/cns!851D717EDFF14CEC!3258.entry
or
http://buzzdev.net/read.php?40,13307,page=1
Click to expand...
Click to collapse
Problem resolved?
I was running igo8, switched off htc sense...then I received a 'cannot find manile file' error message. After that, any time I would try and run igo8, nothing happens and the memory card is no longer recognized by the phone. Then all of a sudden, the phone shutbitself off and would not go past the HTC loho at statup. Anf when it would go past the logo, it would get stuck at the orange widows moble screen. I hard resetted hingking it would solve the issue...but no.
telegraph0000 said:
I was running igo8, switched off htc sense...then I received a 'cannot find manile file' error message. After that, any time I would try and run igo8, nothing happens and the memory card is no longer recognized by the phone. Then all of a sudden, the phone shutbitself off and would not go past the HTC loho at statup. Anf when it would go past the logo, it would get stuck at the orange widows moble screen. I hard resetted hingking it would solve the issue...but no.
Click to expand...
Click to collapse
there´s already a thread discussing this topic.
Take a look here:
http://forum.xda-developers.com/showthread.php?t=506560
Hi there, I've been reading the forum for about a week trying to find a fix for my deceased orbit xda.
Problem started when the phone started crashing, the screen was going white and needed re-starting. Eventually it failed to load and froze at the blue screen with the red writing!
so I started reading and tried soft and hard re-booting to no avail.
I have managed to get the phone into bootloader and connected a USB
it recognises the usb and installs as a mobile device on my laptop but here's where it gets tricky. I dunno alot about phone's and am struggling to understand some of the processes. I have tried booting off the SD card but it said invalid certificate (i used the artiemg.nhb file from rapidshare)
I have all the original paperwork and cd's for the phone but dont know what or how to flash a ROM.
what do I need and more important how do I do it without all the tech talk.
Its a WM5 phone - thanks
EDIT - Just to clarify, have just tried the romupdateutility on raving_nanza's sig but recieve an error - am running vista on my laptop
Update, I managed yesterday to get the phone to boot from the SD card and indeed it flashed it and WM5 is back up and running, the new problem is its network locked (to O2 i presume). I was using this phone on orange previously without an issue????
any Idea's other than paying imei check?
...
danv6saxo said:
just tried the romupdateutility on raving_nanza's sig but recieve an error - am running vista on my laptop
Click to expand...
Click to collapse
what link was it?
what error did you have?