I have had an SPV M2000 for a week and Iam very impressed.
However I cannott seem to get active sync (USB) to my PC and active sync to my companies outlook server via Orange GPRS to coexist (I am not using pop protocol but over the internet to a HTTP address).
When I do a manual sync via GPRS (I have to go into server in the activesync app and tick inbox) Iam informed that my outlook inbox will need to be refreshed (not quite these words), which is what happens.
When Iam back by my PC I have to switch of server sync to get the USB sync to work again and so on.
Both methods work well independantly and I cant see a way of setting up different accounts.
I have spoken to orange and they said only pop syncing was supported.
I am sure that Iam missing something here ?
thanks
Ges
I have had an SPV M2000 for a week and Iam very impressed.
However I cannott seem to get active sync (USB) to my PC and active sync to my companies outlook server via Orange GPRS to coexist (I am not using pop protocol but over the internet to a HTTP address).
When I do a manual sync via GPRS (I have to go into server in the activesync app and tick inbox) Iam informed that my outlook inbox will need to be refreshed (not quite these words), which is what happens.
When Iam back by my PC I have to switch of server sync to get the USB sync to work again and so on.
Both methods work well independantly and I cant see a way of setting up different accounts.
I have spoken to orange and they said only pop syncing was supported.
I am sure that Iam missing something here ?
thanks
Ges
Somebody has trouble with WM 2005, ActiveSync 4.0 (in PC) is working not stable or hanging all the time and me too- Magneto with WinXP SP2, office 2003 SP1.
In my experience some solution can be improved as following:
1. ActiveSync via IR - very sample but too slow
2. ActiveSync via Bluetooth - sample and fast
3. ActiveSync via USB, we need to do some steps
+ Turn off firewall of OS windows
+ Open network cards on your Himalaya:: Settings/ Connections/ Network cards
+ Click "Remote NDIS host" and you can see: Marked " Use specific IP addres"
+ Click " Use server-assigned IP address"
+ Click OK
+ Connect your device to PC, ActiveSync must be working at least in my case
,,,,
i tried these but it didn'nt work plz try to help its now 20 days of serching for a solution for active sync 4 proplem with usb
,,,,
i tried these but it didn'nt work plz try to help its now 20 days of serching for a solution for active sync 4 proplem with usb
??
@ xpirate
You can try remove activesync 4.0 and reinstall again, reset PC, turn off firewall and reconnect.
the problem i have is with outlook and activesync. whenever i try and use activesync, it pops up with some dialog about outlook not being configured correctly. which is true, seeing as I DONT USE OUTLOOK FOR ANYTHING! so why is this happening? it's not even set to sync email as i dont use outlook!
deadparrot said:
the problem i have is with outlook and activesync. whenever i try and use activesync, it pops up with some dialog about outlook not being configured correctly. which is true, seeing as I DONT USE OUTLOOK FOR ANYTHING! so why is this happening? it's not even set to sync email as i dont use outlook!
Click to expand...
Click to collapse
I noticed the same problem with AS 4 - it would only synchronise Favourites and Files.
Read the error messages carefully and you will find one telling you to use the 'Detect & repair' option on Outlook. I did so and it synced properly.
It was when I went back to Outlook Express that I realised that my OE wasnt the default email client anymore - Outlook had taken over that function. I made OE the default client again and AS stopped synchronising - went back to the same old error.
From the above I can only conclude that AS4 will only synchronise with Outlook and not any other PIM programmes. It also requires Outlook to be your default email client if you want to sync - slimy lil microsoft trick.
If you have a firewall, you will also notice that ActiveSync tries to send out email messages - this is both annoying and scary. Who are these messages intended for - Microsoft? I have blocked AS4 from sending emails on my firewall, but I still have to do a 'detect and repair' which sets Outlook as the default email client everytime I want to sync...
Problemas with the activesync
I don´t know what happen with the activesync and w2005. I cannot synconize because a hardware happen in the device manager.
The error is in the device manager-network adapters- windows mobile-base.
thanks for the help.
Txemuki
Re: Problemas with the activesync
belaten said:
I don´t know what happen with the activesync and w2005. I cannot synconize because a hardware happen in the device manager.
The error is in the device manager-network adapters- windows mobile-base.
Click to expand...
Click to collapse
I got the same problem with my Win2003Server box.
If you are running XP then you need to apply Service Pack 2
If you are running 2003 then you need to apply Service Pack 1
Seems that these packs have files "netrndis.inf" and "Usb_Rndis.ndi" that fix our problem
If you will find these files could you pls send them here? I dont' have SP1 installed and cant find these anywhere ((
I can confirm this.
On my office notebook I don't have SP2 on XP and Activesync does not work via USB (Bluetooth works).
On my home PC I have SP2 on XP and Activesync works via USB.
I guess I have to try to get these files somehow.
Patric
Update: OK, I got netrndis, but I don't have usb_rndis...
Hi Patric,
Thanx for the file!!!
Can you also post: rndismpx.sys AND usb8023x.sys ?
So, hope we will find a solution for non-SPed WinXPs and maybe for non-SPed Win2003
Thx!
OK, the files are attached. Does this help? I'm still missing the USB_rndis.ndi file.
Cheers Patric
Hi Patric,
pschoch said:
OK, the files are attached. Does this help? I'm still missing the USB_rndis.ndi file.
Click to expand...
Click to collapse
Thank you very much for the files! No need for the "usb_rndis.ndi"
It seems to be working on XP but not on my w2k3 box :-(((
Here what to do with files on XP:
1) Open "Drivers" subfolder in your ActiveSync folder (i.e., c:\program files\microsoft activesync\drivers)
2) Copy all three files there: netrndis.inf, rndismpx.sys & usb8023x.sys
3) Put your I-Mate to the cradle
4) When device installation wizard will ask you to proceed with Automatic or Manual installation you need to Choose "Manual". Then open your activesync's Drivers folder. Choose "Windows Mobile-based device" and wait until installation is finishes...
Good Luck!
hi there..
i have installed longhorn winhec build 5048 (the newest), office xp, activesync 4 and connected my mda2 (with wm2k5) to pc
i can see it in network controlers and activesync connects to mda2
but when i sync, i get an error message
i don't connect to exchange server, i just want to synchronize mda2 with outlook
the error is on the screenshot
thanks for help
johnz said:
i have installed longhorn winhec build 5048 (the newest), office xp, activesync 4 and connected my mda2 (with wm2k5) to pc
i can see it in network controlers and activesync connects to mda2
but when i sync, i get an error message
i don't connect to exchange server, i just want to synchronize mda2 with outlook
the error is on the screenshot
Click to expand...
Click to collapse
Have no exact idea cause didn't have such, but try to:
1) Disable ALL possible firewalls
2) Make sure your current ActiveSync Partnership is not "Microsoft Exchange" and if it is, just delete current partnership and create a new one
3) Remove "Email" from your sync list?!
4) Remove "Favorites" from your sync list?!
thx..
but..I have no firewall turned on (i had only microsoft firewall, it's off)
I have never connected to an exchange server, my partnership in activesync is only with my pc.
I have reinstalled activesync, not useful
removing items could help.. i'll give it a try
i'm going to sleep for now, thanks..
I *think* longhorn is very nice, but i'll stay with xp
I copied everything and did the procedure... now I get the error message 'Device can not start (10)'...
Not successful yet...
Patric
can instal 2005 on my xda2
hey i downloaded the win2005 and active sync 4 but when iam flashing ma rom and instaling the file an error says that cannot connect or smthn or an error in connection why is that ?
any progress
Same error Pschosch
No Progress what so ever!!
ActiveSycn 4.0 Works after all!!!
I fixed my ActiveSync USB problem...
I downloaded ActiveSync 4.0 from Microsoft's web site and instlaled over current AS4.0.
When I placed my MDA2 on the cradle, the same problem persisted, so with the PDA still in the cradle I unplugged the USB connector and then connected it again but to another port. Now the system detected a "new" device and installed properly this time so now it works 100%.
I hope this procedure helps you too!
By the way, I'm on Win XP (no SP2) and USB 1.1
Best regards,
Rayan
Does the activesync 4 can sync WM2003SE? cuz i got problem saying that version incompatible..
Hi,
After much trawling through several threads here I got kde and synce wired up with opensync for my HTC TyTN II.
I can do pls which works correctly.
I can run msynctool (or kitchensync) to sync and I can copy tasks and contacts.
However it bombs out on the calendar with the following error on ActiveSync:
<Error Partner="{E5A62E72-FFF6-2305-F097-6891765B94FB}" Code="80072f78" Title="View status" Body="ActiveSync cannot reach the server. Check that the server address and proxy server settings are correct."/>
I tried turning off advanced networking features, but when I do this I lose the partnership and cannot create a new one.
http://ubuntuforums.org/showthread.p...ighlight=synce says that synce and usb don't work, but I can't find any posts as to why.
Any help would be really appreciated.
Thanks
It appears that new issue with Hotmail over EAS (Activesync or Active Sync) has arisen in the last few months during Microsoft's updating of the Hotmail servers. This is an issue that is already being discussed in certain Android-specific forums here in XDA (and here), but I thought it would be a good idea to get a Windows Mobile 6.5 discussion going.
And here is a link to a BIG discussion on Answers.Microsoft.
The problem began a few days ago with my HTC Whitestone (Verizon Imagio). I'm running WinMo 6.5 with an NRG ROM. My PC is Windows 7. I sync my Hotmail email, contacts, and calendar over the air via EAS and notes, Onenote, and tasks via USB with my PC, so, I have two Activesync relationships in my phone. Whenever I try to sync to my PC via USB, I get the following message:
"There has been a change made on your server that requires you to re-synchronize all items on your device. All changes made since your last successful sync will be lost. Do you wish to continue?"
And the following support code: 0x80883001
This error message and support code are in reference to the Exchange account (over the air for Hotmail), not the PC account via USB. I have tried the following fixes, all to no avail:
Selected "Yes" after receiving the error message.
Deleted and recreated both accounts.
Created the Exchange account with a different server as suggested in one of the XDA threads above (in my case it was blu-m.hotmail.com)
Unticked "Enable faster data synchronization" in Start -> Settings -> Connections -> USB to PC.
Any suggestions?