*************
post removed due some r
personal reason
******
*******
*********
********
**********
Related
When I try to sync my 8525, with any type of Outlook portion (contacts, calendar, notes), I get the following errors in my Application event log:
Event Type: Warning
Event Source: MsiInstaller
Event Category: None
Event ID: 1004
Date: 6/24/2007
Time: 6:26:16 PM
User: NT AUTHORITY\NETWORK SERVICE
Computer: KEITH
Description:
Detection of product '{90110409-6000-11D3-8CFE-0150048383C9}', feature 'OUTLOOKFiles', component '{AAB1AFA6-C533-11D3-8F30-00C04F5EFF06}' failed. The resource 'HKEY_CLASSES_ROOT\.pst\' does not exist.
---------------------------------------------------
Event Type: Warning
Event Source: MsiInstaller
Event Category: None
Event ID: 1001
Date: 6/24/2007
Time: 6:26:16 PM
User: NT AUTHORITY\NETWORK SERVICE
Computer: KEITH
Description:
Detection of product '{90110409-6000-11D3-8CFE-0150048383C9}', feature 'OUTLOOKFiles' failed during request for component '{3CE26368-6322-4ABF-B11B-458F5C450D0F}'
The device will sync fine, do I need to worry about these errors? I just get them every time I sync.
I tried to update to the latest bin rom with the acer tool, and this is what appened:
//=======================================================//
//================== Debug Log Start!! ==================//
//=======================================================//
[Info] : Program version is : ACER Download Tool [Intra][Single] v3.100 (2009.10.27)
[Info] : Merged file is : C:\Users\Dark Schneider\Downloads\4.008.08.EMEA.VFIT_bin\4.008.08.EMEA.VFIT.bin
[Info] : Port for Backup is : COM11
-----------------------------------------------------------
---------------- [Info] : Backup Start !! -----------------
-----------------------------------------------------------
[Backup] : Pass IsPhoneConnected()
[Backup] : Pass UnLockSpc()
[Backup] : Pass EnterIntoOfflineDigital()
[Backup] : In BackupNvItemProcess()
[Backup] : Create C:\A1_QCN Directory
[Backup] : Create directory : C:\Program Files\QCNFILES
[Backup] : .csv file in : C:\Users\Dark Schneider\Downloads\A1_DL_Tool__Intra__Single__v3.100_20091027\A1_DL_Tool_[Intra][Single]_v3.100_20091027\OursNvTable_ReadyToUse.csv
[Backup] : Backup ForLoop is finished!
[Backup] : IMEI Number is : XXXXXXXXXX asd
[Backup] : xml file was written!!, Filename is : asdasdasdasd_0.xml
[Backup] : xml file was copied into A1_QCN directory !!
[Backup] : Path and filename is : C:\A1_QCN\asdadasd_0_0526_1919_15.xml
[Backup] : xml file was also copied into : C:\Program Files\QCNFILES
[Backup] : Path and filename is : C:\Program Files\QCNFILES\ghghghghg_2011_0526_1919_15.xml
[Backup] : Backup Success !!
-----------------------------------------------------------
--------------- [Info] : Backup Finished!! ----------------
-----------------------------------------------------------
[Info] : Change mode Start! (OS to AMSS Download mode)
[Info] : Port is Open
[Info] : Port is Disposed
[Info] : Get AMSS Download Port Start!
[AMSS Port] : WaitTime is : 15
[AMSS Port] : Old vid and pid was NOT Found...
[AMSS Port] : acer vid and pid was Found
[AMSS Port] : AMSS Port is : COM13
[Info] : Port for AMSS Download is : COM13
[Info] : Beginning to Open AMSS COM Port : UsbConnect()
-----------------------------------------------------------
--------------- [Info] : Hex file Start !! ----------------
-----------------------------------------------------------
[Hex] : Receiver thread is ready !
[Hex] : Transfer thread is ready !
[AMSS Port] : WaitTime is : 15
[AMSS Port] : Old vid and pid was NOT Found...
[AMSS Port] : acer vid and pid was Found
[AMSS Port] : AMSS Port is : COM13
-----------------------------------------------------------
------------- [Info] : Hex file Finished !! ---------------
-----------------------------------------------------------
-----------------------------------------------------------
---------------- [Info] : AMSS Start !! ------------------
-----------------------------------------------------------
[AMSS] : AMSS Receiver Ready !
[AMSS] : No matter the partition table is the same or diff, Restoration is always needed !
[AMSS] : AMSS Start !
-----------------------------------------------------------
--------------- [Info] : AMSS Finished !! -----------------
-----------------------------------------------------------
[Info] : Change mode Start! (AMSS Download to Fastboot mode)
[Info] : Command is ready. (AMSS Download to Fastboot mode)
[Info] : Close AMSS com port
-----------------------------------------------------------
------------- [Info] : Updating OS Start !! ---------------
-----------------------------------------------------------
[Fastboot] : In Fastboot_State.Fb_DetectAndWait
[Fastboot] : Find Fastboot mode!!
[Fastboot] : In Fastboot_State.Fb_SettingVar
[Fastboot] : In Fastboot_State.Fb_Erase_SetupData
[Fastboot] : [Erase] : [setupdata]
[Fastboot] : [Erase] : in FastbootDLImage_Initial()
[Fastboot] : [Erase] : ExitCode is : 0
[Fastboot] : [Erase] : result is : erasing 'setupdata'... OKAY
[Fastboot] : [Erase] : [setupdata] : Okay
[Fastboot] : In Fastboot_State.Fb_Boot
[Fastboot] : [boot.img] : Beginning
[Fastboot] : [Erase] : [boot]
[Fastboot] : [Erase] : in FastbootDLImage_Initial()
[Fastboot] : [Erase] : ExitCode is : 0
[Fastboot] : [Erase] : result is : erasing 'boot'... OKAY
[Fastboot] : [Erase] : [boot] : Okay
[Fastboot] : [boot.img] : arg is : flash boot "C:\Users\Dark Schneider\Downloads\4.008.08.EMEA.VFIT_bin\SDCAAPZ\boot.img"
[Fastboot] : [In FastbootDLImage_NewArch03()] : ExitCode is : 0
[Fastboot] : [In FastbootDLImage_NewArch03()] : result[outer] is : sending 'boot' (2477 KB)... OKAY
[Fastboot] : [In FastbootDLImage_NewArch03()] : result[inner] is : writing 'boot'... OKAY
[Fastboot] : Fastboot operation Success!!
[Fastboot] : [boot.img] : Okay
[Fastboot] : In Fastboot_State.Fb_System
[Fastboot] : [system.img] : Beginning
[Fastboot] : [Erase] : [system]
[Fastboot] : [Erase] : in FastbootDLImage_Initial()
[Fastboot] : [Erase] : ExitCode is : 0
[Fastboot] : [Erase] : result is : erasing 'system'... OKAY
[Fastboot] : [Erase] : [system] : Okay
[Fastboot] : [system.img] : arg is : flash system "C:\Users\Dark Schneider\Downloads\4.008.08.EMEA.VFIT_bin\SDCAAPZ\system.img"
[Fastboot] : [In FastbootDLImage_NewArch03()] : ExitCode is : 0
[Fastboot] : [In FastbootDLImage_NewArch03()] : result[outer] is : sending 'system' (153631 KB)... OKAY
[Fastboot] : [In FastbootDLImage_NewArch03()] : result[inner] is : writing 'system'... OKAY
[Fastboot] : Fastboot operation Success!!
[Fastboot] : [system.img] : Okay
[Fastboot] : In Fastboot_State.Fb_UserData
[Fastboot] : [userdata.img] : Beginning
[Fastboot] : [Erase] : [userdata]
[Fastboot] : [Erase] : in FastbootDLImage_Initial()
[Fastboot] : [Erase] : ExitCode is : 0
[Fastboot] : [Erase] : result is : erasing 'userdata'... OKAY
[Fastboot] : [Erase] : [userdata] : Okay
[Fastboot] : [userdata.img] : arg is : flash userdata "C:\Users\Dark Schneider\Downloads\4.008.08.EMEA.VFIT_bin\SDCAAPZ\userdata.img"
[Fastboot] : [In FastbootDLImage_NewArch03()] : ExitCode is : 0
[Fastboot] : [In FastbootDLImage_NewArch03()] : result[outer] is : sending 'userdata' (2 KB)... OKAY
[Fastboot] : [In FastbootDLImage_NewArch03()] : result[inner] is : writing 'userdata'... OKAY
[Fastboot] : Fastboot operation Success!!
[Fastboot] : [userdata.img] : Okay
[Fastboot] : In Fastboot_State.Fb_Recovery
[Fastboot] : [recovery.img] : Beginning
[Fastboot] : [Erase] : [recovery]
[Fastboot] : [Erase] : in FastbootDLImage_Initial()
[Fastboot] : [Erase] : ExitCode is : 0
[Fastboot] : [Erase] : result is : erasing 'recovery'... OKAY
[Fastboot] : [Erase] : [recovery] : Okay
[Fastboot] : [recovery.img] : arg is : flash recovery "C:\Users\Dark Schneider\Downloads\4.008.08.EMEA.VFIT_bin\SDCAAPZ\recovery.img"
[Fastboot] : [In FastbootDLImage_NewArch03()] : ExitCode is : 0
[Fastboot] : [In FastbootDLImage_NewArch03()] : result[outer] is : sending 'recovery' (2701 KB)... OKAY
[Fastboot] : [In FastbootDLImage_NewArch03()] : result[inner] is : writing 'recovery'... OKAY
[Fastboot] : Fastboot operation Success!!
[Fastboot] : [recovery.img] : Okay
[Fastboot] : In Fastboot_State.Fb_Splash1
[Fastboot] : [splash1.img] : Beginning
[Fastboot] : [Erase] : [splash1]
[Fastboot] : [Erase] : in FastbootDLImage_Initial()
[Fastboot] : [Erase] : ExitCode is : 0
[Fastboot] : [Erase] : result is : erasing 'splash1'... OKAY
[Fastboot] : [Erase] : [splash1] : Okay
[Fastboot] : [splash1.img] : arg is : flash splash1 "C:\Users\Dark Schneider\Downloads\4.008.08.EMEA.VFIT_bin\SDCAAPZ\initlogo.rle"
[Fastboot] : [In FastbootDLImage_NewArch03()] : ExitCode is : 0
[Fastboot] : [In FastbootDLImage_NewArch03()] : result[outer] is : sending 'splash1' (8 KB)... OKAY
[Fastboot] : [In FastbootDLImage_NewArch03()] : result[inner] is : writing 'splash1'... OKAY
[Fastboot] : Fastboot operation Success!!
[Fastboot] : [initlogo.rle] : Okay
[Fastboot] : In Fastboot_State.Fb_DevInfo
[Fastboot] : In Fastboot_State.Fb_Touch
[Fastboot] : [touch.bin] : Beginning
[Fastboot] : [touch.bin] : arg is : flash touch "C:\Users\Dark Schneider\Downloads\4.008.08.EMEA.VFIT_bin\SDCAAPZ\touch.bin"
[Fastboot] : [In FastbootDLImage_NewArch03()] : ExitCode is : 0
[Fastboot] : [In FastbootDLImage_NewArch03()] : result[outer] is : sending 'touch' (4 KB)... OKAY
[Fastboot] : [In FastbootDLImage_NewArch03()] : result[inner] is : writing 'touch'... FAILED (status read failed (Too many links))
[Fastboot] : Fail... result[inner] does not contain OKAY.
[Fastboot] : [touch.bin] : Fail...
[Fastboot] : In Fastboot_State.Fb_Error_ReDo
[Warning] : Fastboot Re-do now... TotalErrorTimes is : 1
[Fastboot] : In Fastboot_State.Fb_DetectAndWait
[Error] : Wait too long, Now, Quit Process... process failed...
[Fastboot] : Fail...
[Final] : [In Flg==false] : Debug Log End : Restore Needed.
[Second Check] : [In Flg==false] : This Phone NEED Restoration !!!
Now if i try to power on the phone it vibrate one time but nothing else.
If i try to power on the phone with power+volume down+camera it vibrate 3 times and nothing else, what i can do?
Is it showing connected when you run Acer tool
Sent from my Liquid using XDA Premium App
When i typed "task 29" i got error message below
Format BINFS start
Fill RSVD information for block 497 to 530
CE start start block=530, total block=3566
erase_page - error bad status: 0xB791D500
ERASE block 1971 FAIL !!!
TAG NOT FOUND !!! NOT CLEAR STORAGE !!!
Format BINFS end
can everyone give me a suggestion?
cheasamnang said:
can everyone give me a suggestion?
Click to expand...
Click to collapse
Yea, go read post 1 of the mtty thread.
Thanks you
I have an Hd2 that was running Android JB. It froze one day and would not come back on. Since then I have been trying all methods to flash the Stock ROm and other android roms but kept getting the 1Efatal hit error. I ran Mtty and this is what I got:
Cmd>set 14 0
Cmd>set 14 0
crc=0xD2C8DA7F.
HTCST ÚÈÒHTCE
Cmd>task 29
Format BINFS start
Fill RSVD information for block 497 to 530
CE start start block=530, total block=7662
erase_page - error bad status: 0xB791E960
ERASE block 2284 FAIL !!!
erase_page - error bad status: 0xB791E960
ERASE block 2395 FAIL !!!
erase_page - error bad status: 0xB791E960
ERASE block 2933 FAIL !!!
erase_page - error bad status: 0xB791E960
ERASE block 4078 FAIL !!!
erase_page - error bad status: 0xB791E960
ERASE block 7186 FAIL !!!
TAG NOT FOUND !!! NOT CLEAR STORAGE !!!
Format BINFS end
Cmd>
Is there a way to correct these bad blocks or is the phone completely dead?
josephh71 said:
I have an Hd2 that was running Android JB. It froze one day and would not come back on. Since then I have been trying all methods to flash the Stock ROm and other android roms but kept getting the 1Efatal hit error. I ran Mtty and this is what I got:
Cmd>set 14 0
Cmd>set 14 0
crc=0xD2C8DA7F.
HTCST ÚÈÒHTCE
Cmd>task 29
Format BINFS start
Fill RSVD information for block 497 to 530
CE start start block=530, total block=7662
erase_page - error bad status: 0xB791E960
ERASE block 2284 FAIL !!!
erase_page - error bad status: 0xB791E960
ERASE block 2395 FAIL !!!
erase_page - error bad status: 0xB791E960
ERASE block 2933 FAIL !!!
erase_page - error bad status: 0xB791E960
ERASE block 4078 FAIL !!!
erase_page - error bad status: 0xB791E960
ERASE block 7186 FAIL !!!
TAG NOT FOUND !!! NOT CLEAR STORAGE !!!
Format BINFS end
Cmd>
Is there a way to correct these bad blocks or is the phone completely dead?
Click to expand...
Click to collapse
Also anyone thinking of asking either of the following questions:
1: "After task 29, I get this output in MTTY: Total Bad Block in CE: x"
2: "After task 29, I get this output in MTTY:
ERASE block xxx FAIL !!!
ERASE block xxx FAIL !!!"
(where x is a random number)
This has been asked 100+ times in this thread so this is the final time I will answer:
IT MEANS NOTHING..NADA..ZIP! I have not experienced ANY problem with this output...Please stop asking!
The above is taken from "The Definitive mtty thread".
the command for checking for bad blocks is..Cmd>info 8
**********
********
******