Hi, my Oneplus 6T's volume up and down button was broken. Only power button works. Now my phone get bootloop and I can't access recovery / fastboot mode.
In this case, how to entering recovery mode or fastboot without power + volume combination key?
Thank you
adb reboot recovery or adb reboot fastboot but if button was broken , they must not press , bootloop is may be the consequence of buttons that remain pressed
Thank you. Finally, I repaired the volume button
Related
I flashed TWRP 2.8.7.7 Material Play with fastboot:
Code:
fastboot flash recovery recovery.img
I cannot boot to recovery by pressing the Power + Volume Up button. Any help?
I can only boot to TWRP with the advanced reboot function in CM12.1 (Power Menu>Reboot>Recovery) or using:
Code:
adb reboot recovery
Or
Code:
fastboot boot recovery.img
Another question: is the Lenovo A6000 (kraft) already has an unlocked bootloader out of the box? Thank you so much.
https://userscloud.com/a25aszfwkn2z
That's the recovery image I used, the one included in the CM12.1 thread.
Press power up then vol up and then vol down quickly one by one not at same time but quickly
Sourav_8434 said:
Press power up then vol up and then vol down quickly one by one not at same time but quickly
Click to expand...
Click to collapse
Power, volume up & volume down press and hold at the same works for me always.
press volume up n down button together then press power button till screen turn on holding all three buttons ,then release power button
I cannot access the recovery mode
I tried:
- Power off your Nexus 10, and reboot it into fastboot mode by holding the volume up button, volume down button and power button.
No success, the tablet vibrates but stop in the black screen.
And by adb no sucess too.
- adb reboot bootloader
The Nexus 10 off, but does not start the recovery mode, stop in the black screen.
Official 5.1.1
Someone has an idea to fix it?
I get some requests from some users from XDA that they don't know how to enter to recovery,download mode or bootloader so Here's small guide
Hope That will Help
How to Boot to TWRP Recovery same for Stock Recovery
1.Turn Off your Device
2.Press and hold Volume UP ( VOL + ) key + Power Button
3.Wait to See Alcatel logo and Release Power Button
4.Continue holding Volume UP ( VOL + ) until you see the TWRP logo then release the Volume Button
How to Enter to Download Mode
1.Turn off the phone
2.Press Power Button+Volume up+Volume down key,all together)
3.Plug your Phone to PC with USB Cable..It will enter in download mode (You will get red screen with warning)
4.Long press Volume up till the screen goes black.
How to Boot to Bootloader
For Stock Recovery:
-Enter to the Stock Recovery
-Just Select Reboot to Bootloader (You can select with Vol+ or Vol-) and press Power Button to confirm
For Twrp:
-Enter to Twrp recovery
-Go to Reboot Tab
-Press Bootloader​
Hello, i'm trying from a few days to install TWRP and Custom Rom on my LeTV Le1 Pro, but unfortunately i still cant get in bootloader mode. When using the command from the ADB "adb reboot bootloader" or just the simple combination of the keys - Volume down+power button, i've got the Linux Penguin for around 5 seconds and after that the phone vibrates and start as normal he should do when pressing only the power button.
Facing the same problem here
Some one plz help, I'm facing the same problem here
After you press the vol - and off the ? shos, then hold vol + and off and you will enter recovery mode (if twrp is installed).
I succesfully can flash TWRP to recovery_ramdisk via fastboot. PHONE and FRP are unlocked. My phone is bricked and when i boot to OS i get "ERROR MODE Attention! ..." And i cant go to twrp by holding volume up + power key. But i can go to some kind of recovery mode by pressing all buttons (volume up, volume down and power key). Can somebody help me?
Thanks.
My phone is HUAWEI WAS-LX1C482
I just deleted System particion with fastboot. but i dont know how to install android now...