hi ,
can some one recommend the must have accessories for the note 10 plus 5g.
which you must have if you are getting the phone.
many thanks
ps I have ordered the genuine led flip case for the phone
I got a wireless fast charger, bt earbuds, c to 3.5 mm original samsung dongle, a 6 ft pd certified cable, light cases, sturdy cases, tempered glass screen protector, plastic back protector, aluminum camera protective ring, 6000 mAh battery case, to mention just the most significatives, I dont know, get what makes you feel fine!
Thanks
Got the USB cable,wireless charger .
Was going for the official samsung l
Thanks
Got the USB cable,wireless charger .
Was going for the official samsung led flip case .would you recommend any other case which also wakes and puts the phone to sleep when you open and close the case
Related
I upgraded to an N1.
I have a used, rooted G1 for sale
It's black but with the silver battery cover of the white model making it look sleek and contemporary
Its condition is about a 8/10. small dings on the corners, one small scratch on the screen. None of the blemishes affect any functionality of the phone. The scratch cannot be seen when the screen is on
The phone is running pays ROM
I am including all my accessories that I have with this phone:
original black battery cover
OEM silver battery cover
extended black battery cover
extended silver battery cover
Andida extended life battery
2300 mah extended battery
original battery
retractable car charger
home charger
micro usb - earphone adapter (can be used to connect phone to car stereo and to charge)
Home dock with charger
black protective case
microsd card
I'm asking $150
I'll post pics later as i'm at work right now.
PM me if you're interested.
pics
Some pics for those that requested...
http://picasaweb.google.com/riokalaw/G1ForSale?feat=directlink
thanks for looking
1) Is it unlocked?
2) Do you ship internationally? and cost?
3) Do you accept PayPal?
Thanks!
Check your inbox
You've got mail
PK
dupiclate dupiclate
Does one of these exist? I have a cheap TPU S-line case from ebay that I bought when the phone was first released. It works with the QI charger but it does not keep the dust out of the ports.
I bought two cheapies off ebay to test if something a little thicker would work with the QI charger and so far nothing does. Seems that any case that covers ports are thick and may not work with the QI charger.
BTW its the Energizer charger, not the official Google one.
Have you considered just getting a microusb port cover? http://www.moddiy.com/products/modDIY-Micro%2dUSB-Protective-Jack-Cover.html for example
ziddey said:
Have you considered just getting a microusb port cover? http://www.moddiy.com/products/modDIY-Micro%2dUSB-Protective-Jack-Cover.html for example
Click to expand...
Click to collapse
I have but if a case exists that will work then I would like to give that a shot first. I notice the covers for the cases are snug fit so it wont allow dust in at all when a plug may leave room between it and the case. I work in a very dirty environment and would like to keep the phone itself as clean as possible.
A bit of a random one that falls under the "I crap you not" category, but it seems the combination of slippery glass back + a wireless charger (non-Samsung brand) that has a high pitch whine seems to be just enough to cause the phone to slowly rotate until it completely falls off the charger after about 5 minutes.
Just throwing it out there in case I'm not the only one. I'm going to be putting a Ringke slim case on it in a couple days like I did with the S3, S4, and S5 which will solve the problem.
dr/owned said:
A bit of a random one that falls under the "I crap you not" category, but it seems the combination of slippery glass back + a wireless charger (non-Samsung brand) that has a high pitch whine seems to be just enough to cause the phone to slowly rotate until it completely falls off the charger after about 5 minutes.
Just throwing it out there in case I'm not the only one. I'm going to be putting a Ringke slim case on it in a couple days like I did with the S3, S4, and S5 which will solve the problem.
Click to expand...
Click to collapse
Why not use IF to make a rule: If it's charging, turn vibrate off?
https://play.google.com/store/apps/details?id=com.ifttt.ifttt&hl=en
entropism said:
Why not use IF to make a rule: If it's charging, turn vibrate off?
Click to expand...
Click to collapse
The phone's vibrator isn't what's vibrating. My guess is it's inductor coil whine that's causing just enough vibration to rotate the phone off the pad (wiki has a page called Coil noise)
Oh wow, that's... kind of awesome, in the worst way possible. I'll say this: I have no issues whatsoever with my Nokia Qi chargers, the D900s I believe? The plates that AT&T sold for the Lumia 920, and they blew out for $5 each a while back. Awesome, awesome chargers.
buy some thin rubber film that has an adhesive on one side and put it on the pad.
*snarky comment removed sry*
tft said:
buy some thin rubber film that has an adhesive on one side and put it on the pad.
Click to expand...
Click to collapse
This. Just a thin rubber film should suffice.
By the way, have anybody tried to use wireless charging with the S6 wrapped in a protective case? I read about materials and wireless charging and I read even 1 cm of plastic barrier should not be a problem, but just wanted to make sure if somebody has tried it already.
D15 said:
This. Just a thin rubber film should suffice.
By the way, have anybody tried to use wireless charging with the S6 wrapped in a protective case? I read about materials and wireless charging and I read even 1 cm of plastic barrier should not be a problem, but just wanted to make sure if somebody has tried it already.
Click to expand...
Click to collapse
Plastic / rubber should be transparent to wireless charging, and my S6 connects to the pad with even a 1/4" air gap.
Get one of these things
http://www.ebay.ca/itm/2-X-Gel-Anti...t=LH_DefaultDomain_0&var=&hash=item3ce9f56ac8
I wouldn't ever use it in a car, but for your purposes it'll do well.
...I use them underneath my cutting boards haha.
It seams that it really happens, very weird though.
Look at the review below, at 16:05 while is wireless charging.
Speed_Br said:
It seams that it really happens, very weird though.
Look at the review below, at 16:05 while is wireless charging.
Click to expand...
Click to collapse
Wow you have a good eye, but yeah at 16:10 you can see the USB port on the phone starts rotating away from the USB cord.
At the cost of a scratch to the bottom left of my S6 I can confirm that it will vibrate off of the charger even if it is placed in the centre of it. Its disappointing that Samsung hasn't tested the phone's wireless charging and picked up on this. I've contacted Samsung to see if anything can be done about it and I'll let you know if/when I get a reply.
AlexanderMorris said:
At the cost of a scratch to the bottom left of my S6 I can confirm that it will vibrate off of the charger even if it is placed in the centre of it. Its disappointing that Samsung hasn't tested the phone's wireless charging and picked up on this. I've contacted Samsung to see if anything can be done about it and I'll let you know if/when I get a reply.
Click to expand...
Click to collapse
It doesn't vibrate off the PMA charger I am using
Is it an LG by any change? Have the same issue with mine, you can watch it rotate in real time. Kinda cool, sort of. lol
D15 said:
This. Just a thin rubber film should suffice.
By the way, have anybody tried to use wireless charging with the S6 wrapped in a protective case? I read about materials and wireless charging and I read even 1 cm of plastic barrier should not be a problem, but just wanted to make sure if somebody has tried it already.
Click to expand...
Click to collapse
my slim armor with plastic+TPU charges with the pad perfectly fine
Never got into wireless charging on my S7. Always had a magnetic mount on the vent with a metal plate between the phone and the case. Now that I'm hooked on wireless charging, I'm on a similar setup but with a wide ring magnet between phone and case so it doesn't interfere with wireless charging. My one issue is that when the phone is flat on a desk, it rocks just a little (and I like a thin case). So what I'm looking for is a thin case, with an embedded magnet (so it's a flat bottom surface) and where the magnet is in a configuration where it doesn't interfere with wireless charging (whether it's a wide ring, or a few magnet points spaced out, etc.) I've thought about digging into my case as a DIY but not there yet Pitaka MagCase looks like it would so the trick but it hasn't been released yet. Any out there that I'm just not finding?
Thanks!
And, this is on an S9 plus.
Can you post pics of your setup? I'm looking for a magnetic wireless car charger that holds up via the vent.
Sent from my SM-G965U using Tapatalk
thx for the tip.... now i want one too
https://www.ipitaka.com/collections/magcase-for-samsung-galaxy-s9
Search on Amazon for "Magnetic Wireless Car Charger, ELEGIANT Fast Wireless Charging Car Mount Phone Holder". Looks like it's now out of stock but there's dozens just like them. I went with something inexpensive to make sure it worked. And it did- fast charged on the mount as well as the Samsung official desktop wireless charger. Although the swivel ball joint on the vent mount was a little flimsy. I placed the magnetic ring such that the top of it was about 1/4" below the bottom of the fingerprint sensor (I spent a lot of time trying to figure out exactly where the coils in the phone were; you can take a good guess by knowing that the desktop Sammy wireless charger woks with both the phone standing upright as well as on it's side and that it's got two coils).
Even though the ring is very thin, it still adds a slight bulge in the middle and makes it "wobble" a bit. I don't have the right shop equipment to shave a circular channel on the inside of the case to place the magnetic ring
Found one made by Nillkin. Have to use their own charging mount (which makes perfect sense as it uses four small magnets at four corners of the mount). Reviews aren't great, it's standard (not fast) charging, and the I like my side buttons uncovered.
Xvida makes one as well (a little bulkier than the Pitaka) but S8 is the most recent they support as of now.
hey guys,
you might wanna hold off getting the pitaka magmount, I received info from pitaka that the s9+ position of the wireless charging coil of S9 therefore the position of the built-in metal plate is different from other cases, they are still testing there new wireless charging mount, it will come out later.
I will be getting a review unit of the case later and I will let you know how I feel about the case. cheers guys.
xzr3b0rnzx said:
hey guys,
you might wanna hold off getting the pitaka magmount, I received info from pitaka that the s9+ position of the wireless charging coil of S9 therefore the position of the built-in metal plate is different from other cases, they are still testing there new wireless charging mount, it will come out later.
I will be getting a review unit of the case later and I will let you know how I feel about the case. cheers guys.
Click to expand...
Click to collapse
I have the iOttie magnetic mount/quick charger in my car.
It worked really well with my S8 and note 8.
I put the small metal ring inside the case on my S9+ and it was very finicky.
Sometimes it would only charge (not fast charge) and other times it wouldn't charge at all.
I found that by placing the ring up higher near the camera, it maintained position to quick charge the phone and hold it securely.
The qi coil in the S9+ seems to be a bit closer to the camera than the other devices I've used.
I hope this helps.
Sent from my SM-G965U using Tapatalk
Great- thanks- similar to my current setup- I'm just looking for a case where the ring is actually embedded in the case, so the back of the case is perfectly flat.
Looks like from another thread the S9+ MagCase has launched- not on Amazon yet but on the Pitaka site- would love to see a review to make sure it quick charges wirelessly (as opposed to not quick). Sounds like they had issues with magnet placement originally and that might affect it.
Nillkin makes one. It's on Amazon as well.
y2k1ltd said:
Nillkin makes one. It's on Amazon as well.
Click to expand...
Click to collapse
Yes- thank you- the Nillkin looks great- and a lot less expensive than the Pitaka- but the case has full edges that cover the buttons which I'm not a fan of.
texasmax said:
Yes- thank you- the Nillkin looks great- and a lot less expensive than the Pitaka- but the case has full edges that cover the buttons which I'm not a fan of.
Click to expand...
Click to collapse
Gotcha, it's not bad.
got my op8pro and the tempered glass is on its way. im looking at wireless chargers for my house and car now. is there anything else i should look at? besides a better case than the clear softcase from oneplus
In my experience, Pitaka has a best case and car wireless charger. They also make home wireless charger but Oneplus has a quicker one, not a big price difference. Actually, I am using silicone case which comes with the phone over Pitaka case and its is perfect, like double layered case. Even wireless charger in car works.
Just check out the Case Mega thread in Accessories...
I've got the Mofi (it's like cloth on the back, really nice)
And the ringke camo ( can see the back of the phone colour through it)
Ringke has better protection, both cover the camera, Mofi just about.
A usb-c to hdmi or display port cable for low latency, gaming is superb on the pro, Dreamcast games run perfectly, solid 60fps Dead or alive 2 with two Xbox pads on your TV via your phone is just superb. Also the phone barely gets warm.