Questions - Samsung Galaxy J5 Questions & Answers

How to root J510H?
How to install roms?
How to install android pie roms on J510H?
#Note:if you have any question about J5 2016 put it in this post so if anyone knows the answer he can reply to the question.

Zaid Koudmani said:
How to root J510H?
How to install roms?
How to install android pie roms on J510H?
#Note:if you have any question about J5 2016 put it in this post so if anyone knows the answer he can reply to the question.
Click to expand...
Click to collapse
How to install custom recovery and root
1. Go to settings on your phone and go to 'about phone' and find where it says build number and click on it 7 times and you unlock developer options.
2. Go into developer options and enable USB debugging and OEM unlock.
3. Download Odin on your PC and install https://samsungodin.com
4. Download twrp .tar file to your PC
J500f is here https://twrp.me/samsung
5. Download USB drivers for your model(your PC should automatically do it when you connect your device)
6. Connect youe device to PC and turn your device off
Next you want to put it into download mode. To do this gold the power button, vol down button and home button simultaneously
7. Disable auto reboot in Odin on PC. Then click the AP tab and locate the twrp file.
Flash the file onto your phone and disconnect from the PC once finished.
Next part is really important.
8. DO NOT REBOOT YOUR DEVICE YET. if you reboot you will lose your custom recovery.
While the phone is still in download mode after you disconnect from PC just remove the battery do not turn it off or reboot it.
9. Put the battery back in and then hold power button, home button and vol up button (same as putting into download only volume up instead of volume down)
10. This should reboot you into your brand new twrp recovery.
11. Just reboot device from twrp settings for now.
12. Download magisk zip to your device. You will find latest stable on first post here https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
13. Turn your device off again. Reboot to recovery same as before (home button, power button and volume up button)
14. Click on install in twrp and locate the magisk.zip file and click on it and flash the file.
15. Reboot once done and go to magisk manager in your app drawer which the magisk.zip will install and thats it
---------- Post added at 11:48 AM ---------- Previous post was at 11:40 AM ----------
How to install a rom
You must have custom recovery installed see the above comment to install.
1. Download the rom you wish to install and put it on your external SD card
2. Reboot your device to recovery.
3. Go to wipe >> advanced wipe and wipe system, data, internal, dalvik and cache.
4. Go to install and search for your rom.zip on external SD card.
5. Flash it and thats it.
6. If you want Google apps (gapps) you will have to download a suitable gapps package for your device and new rom. If your new rom is android 9 pie then download arm gapps, android version 9 and I would recommend the lighter gapps package like nano or pico.
7. Flash gapps right after flashing your rom.
8. Optional wipe dalvik and cache just in case and thats it

garylawwd said:
How to install custom recovery and root
1. Go to settings on your phone and go to 'about phone' and find where it says build number and click on it 7 times and you unlock developer options.
2. Go into developer options and enable USB debugging and OEM unlock.
3. Download Odin on your PC and install https://samsungodin.com
4. Download twrp .tar file to your PC
J500f is here https://twrp.me/samsung
5. Download USB drivers for your model(your PC should automatically do it when you connect your device)
6. Connect youe device to PC and turn your device off
Next you want to put it into download mode. To do this gold the power button, vol down button and home button simultaneously
7. Disable auto reboot in Odin on PC. Then click the AP tab and locate the twrp file.
Flash the file onto your phone and disconnect from the PC once finished.
Next part is really important.
8. DO NOT REBOOT YOUR DEVICE YET. if you reboot you will lose your custom recovery.
While the phone is still in download mode after you disconnect from PC just remove the battery do not turn it off or reboot it.
9. Put the battery back in and then hold power button, home button and vol up button (same as putting into download only volume up instead of volume down)
10. This should reboot you into your brand new twrp recovery.
11. Just reboot device from twrp settings for now.
12. Download magisk zip to your device. You will find latest stable on first post here https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
13. Turn your device off again. Reboot to recovery same as before (home button, power button and volume up button)
14. Click on install in twrp and locate the magisk.zip file and click on it and flash the file.
15. Reboot once done and go to magisk manager in your app drawer which the magisk.zip will install and thats it
---------- Post added at 11:48 AM ---------- Previous post was at 11:40 AM ----------
How to install a rom
You must have custom recovery installed see the above comment to install.
1. Download the rom you wish to install and put it on your external SD card
2. Reboot your device to recovery.
3. Go to wipe >> advanced wipe and wipe system, data, internal, dalvik and cache.
4. Go to install and search for your rom.zip on external SD card.
5. Flash it and thats it.
6. If you want Google apps (gapps) you will have to download a suitable gapps package for your device and new rom. If your new rom is android 9 pie then download arm gapps, android version 9 and I would recommend the lighter gapps package like nano or pico.
7. Flash gapps right after flashing your rom.
8. Optional wipe dalvik and cache just in case and thats it
Click to expand...
Click to collapse
thank you so much you are the best ??

Related

[HOWTO] All-in-One Guide to Flashing your first ROM

This is an effort to write a comprehensive all-in-one guide (for newbies too) to flash ROMS on Huawei S7 Slim 201.
First and foremost you have to root your device (so that you can use certain applications e.g. ROM Manager, Titanium Backup). Do the following:
1. Download SuperOneClick (google it) and extract the files
2. Install Huawei Ideos S7 Slim drivers to your computer (if you have not done it already).
3. Connect your device to your computer via USB. Make sure you have activated USB Debugging on your device. Go to settings > applications > development > tick on USB Debugging.
4. Run SuperOneClick.exe. Disable your Antivirus program before running SuperOneClick (optional but helpful). If the drivers for your device are not installed, SuperOneClick will prompt you to let it find the drivers itself. Press yes and let it continue.
5. Click the root tab. (For my device I had to click root several times because the process got stuck, but eventually it succeeded)
6. After the rooting process ends, reboot your device.
Important notice: Although SuperOneClick confirmed twice that the device was rooted, Titanium Backup could not confirm root. If anyone knows of another way please advise.
Now, in order to flash ROMs do the following:
First of all, you have to install ClockworkMod Recovery on your device. (This will help you to perform many other tasks)
There are two versions of ClockWork Recovery (that I know of).
First one is v2.1.5.8
1. Download the recovery zip (201u.7z) from the attachments .
2. Extract the file.
3. Make sure you have activated USB Debugging on your device. Go to settings > applications > development > tick on USB Debugging
4. Turn off your device and connect it to your computer via USB.
5. Press the volume up key and the power key at the same time until the device enters fastboot mode.
6. Run install.bat (from the unzipped files)
7. When the process ends, reboot your device.
8. With the USB cable connected run reboot into recovery.cmd (from the unzipped files). In the window that will open on the PC, type “adb reboot recovery” without the quotation marks and your device (after a few seconds) will enter recovery mode. (This is something you will have to do every time you enter recovery mode, unfortunately, unless you upgraded to CM9 or CM10 where you can boot to recovery by long pressing the power button anchoosing Reboot> Recovery)
9. When you see the ClockworkMod recovery menu, use the volume up and down keys so many times until the message “back menu button enabled” appears at the end of the screen. Now you can use the power button as ENTER. (This is something you will have to do every time you enter recovery mode, unfortunately too)
Second one is CWM-based Recovery v6.0.1.2. (credit to WRCODE over at the androidtablets.net that mentioned it)
1. Download the recovery rar (install.rar) from the attachments.
2. Extract the file. (you will find no reboot into recovery.cmd in those files so, either use the one mentioned above, or use ROM Manager or GooManager (from Play Store) to reboot into recovery. Note: Those managers require rooting your device)
3. Make sure you have activated USB Debugging on your device. Go to settings > applications > development > tick on USB Debugging
4. Turn off your device and connect it to your computer via USB.
5. Press the volume up key and the power key at the same time until the device enters fastboot mode.
6. Run install.bat (from the unzipped files)
7. When the process ends, reboot your device.
8a.With the USB cable connected run reboot into recovery.cmd . In the window that will open on the PC, type “adb reboot recovery” without the quotation marks and your device (after a few seconds) will enter recovery mode. (This is something you will have to do every time you enter recovery mode, unfortunately, unless you upgraded to CM9 or CM10 where you can boot to recovery by long pressing the power button and choosing Reboot> Recovery).
8b. Use ROM Manager or GooManager and select reboot recovery.
(this recovery version does not require anything in order for the power button to act as ENTER)
Having successfully flashed ClockworkMod Recovery, you are now ready to flash your custom rom.
1. Find the ROM that best suits you, download it and place the .zip file at the root of your internal SD Card.
2. Enter recovery mode (as explained above) and select wipe data/ factory reset. Once this is done, select wipe cache partition. Once this is done select advanced and then select wipe Dalvik cache. (very important to do all of these steps)
3. Go back at the original menu and select install zip from sdcard. Select choose .zip from sdcard. Select the .zip file that you placed at the internal SD card (make sure that it is the correct one) and press the power button for ENTER.
4. Once the ROM has been successfully flashed select reboot system now and press the power button.
If everything went ok, after a few minutes you will have your first glimpse of your new custom ROM.
Enjoy it and remember “Use the above instructions at your own risk.”
Moving to General.
usb driver for win7
hello. i've been using this tab for a while and would like to root it. sadly when i connected the usb cable to the tab the driver is not installed automatically. so i think maybe i have to install it on my own. but i can't find the driver anywhere, even the official website of huawei. (the page is available but when trying to download, it show "Service Temporarily Unavailable - The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.")
therefore i would like to request if anyone would be kind enough to upload the driver for me to proceed rooting this device.
thanks in advance.
shawn1968 said:
This is an effort to write a comprehensive all-in-one guide (for newbies too) to flash ROMS on Huawei S7 Slim 201.
First and foremost you have to root your device (so that you can use certain applications e.g. ROM Manager, Titanium Backup). Do the following:
1. Download SuperOneClick (google it) and extract the files
2. Install Huawei Ideos S7 Slim drivers to your computer (if you have not done it already).
3. Connect your device to your computer via USB. Make sure you have activated USB Debugging on your device. Go to settings > applications > development > tick on USB Debugging.
4. Run SuperOneClick.exe. Disable your Antivirus program before running SuperOneClick (optional but helpful). If the drivers for your device are not installed, SuperOneClick will prompt you to let it find the drivers itself. Press yes and let it continue.
5. Click the root tab. (For my device I had to click root several times because the process got stuck, but eventually it succeeded)
6. After the rooting process ends, reboot your device.
Important notice: Although SuperOneClick confirmed twice that the device was rooted, Titanium Backup could not confirm root. If anyone knows of another way please advise.
Now, in order to flash ROMs do the following:
First of all, you have to install ClockworkMod Recovery on your device. (This will help you to perform many other tasks)
There are two versions of ClockWork Recovery (that I know of).
First one is v2.1.5.8
1. Download the recovery zip (201u.7z) from the attachments .
2. Extract the file.
3. Make sure you have activated USB Debugging on your device. Go to settings > applications > development > tick on USB Debugging
4. Turn off your device and connect it to your computer via USB.
5. Press the volume up key and the power key at the same time until the device enters fastboot mode.
6. Run install.bat (from the unzipped files)
7. When the process ends, reboot your device.
8. With the USB cable connected run reboot into recovery.cmd (from the unzipped files). In the window that will open on the PC, type “adb reboot recovery” without the quotation marks and your device (after a few seconds) will enter recovery mode. (This is something you will have to do every time you enter recovery mode, unfortunately, unless you upgraded to CM9 or CM10 where you can boot to recovery by long pressing the power button anchoosing Reboot> Recovery)
9. When you see the ClockworkMod recovery menu, use the volume up and down keys so many times until the message “back menu button enabled” appears at the end of the screen. Now you can use the power button as ENTER. (This is something you will have to do every time you enter recovery mode, unfortunately too)
Second one is CWM-based Recovery v6.0.1.2. (credit to WRCODE over at the androidtablets.net that mentioned it)
1. Download the recovery rar (install.rar) from the attachments.
2. Extract the file. (you will find no reboot into recovery.cmd in those files so, either use the one mentioned above, or use ROM Manager or GooManager (from Play Store) to reboot into recovery. Note: Those managers require rooting your device)
3. Make sure you have activated USB Debugging on your device. Go to settings > applications > development > tick on USB Debugging
4. Turn off your device and connect it to your computer via USB.
5. Press the volume up key and the power key at the same time until the device enters fastboot mode.
6. Run install.bat (from the unzipped files)
7. When the process ends, reboot your device.
8a.With the USB cable connected run reboot into recovery.cmd . In the window that will open on the PC, type “adb reboot recovery” without the quotation marks and your device (after a few seconds) will enter recovery mode. (This is something you will have to do every time you enter recovery mode, unfortunately, unless you upgraded to CM9 or CM10 where you can boot to recovery by long pressing the power button and choosing Reboot> Recovery).
8b. Use ROM Manager or GooManager and select reboot recovery.
(this recovery version does not require anything in order for the power button to act as ENTER)
Having successfully flashed ClockworkMod Recovery, you are now ready to flash your custom rom.
1. Find the ROM that best suits you, download it and place the .zip file at the root of your internal SD Card.
2. Enter recovery mode (as explained above) and select wipe data/ factory reset. Once this is done, select wipe cache partition. Once this is done select advanced and then select wipe Dalvik cache. (very important to do all of these steps)
3. Go back at the original menu and select install zip from sdcard. Select choose .zip from sdcard. Select the .zip file that you placed at the internal SD card (make sure that it is the correct one) and press the power button for ENTER.
4. Once the ROM has been successfully flashed select reboot system now and press the power button.
If everything went ok, after a few minutes you will have your first glimpse of your new custom ROM.
Enjoy it and remember “Use the above instructions at your own risk.”
Click to expand...
Click to collapse
it can work with Ideos S7-201U ???
im newbie here
thx u
hey can you please make a video on this i got stcuk on the part where you run reboot into recovery.cmd
EDIT: nevermind i figured it out now but a video might be nice for some people
Need driver for win7 x64,worked on vista without any drivers being installed for it :/
Huawei Ideos s7 slim
ok,i manage to do only first part(instal bat) and after its stuck
on my screen says when i start cmd recovery "adb server out of date killing....
daemon stars sucssesfuly
and thats about it,no going to recovery no nothing ..... so any help will be nice..
with regards Nenad
MY HUAWEI IDEOS 201uV100R001C239B010 IS NOT OPENING GOOGLE PLAY STORE ,GAMES AND INSTALLING APPLICATIONS BUT IS PERFORMING GOOGLE AND DOWNLOADING VIDEOS AND GAMES
Device isn't being recognized on fastboot. The drivers I use has worked for all of my devices, except for this one...
:/

g950f firmware rom where can i get it which can easily be rooted?

i need to reinstall the original firmware for g950f but i cant find it anywhere
i want to root my device ... the file i did find doesnt seemt to load up custom roms
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
Guides:
Notice: It may wipe all your data including those in internal storage.
Part 1 - HOW-TO FLASH TWRP:
1. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options and enable OEM Unlock option.
3. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
4. Download and extract Odin (Samsung's Flash Tool) to your computer.
5. Download a .tar image of TWRP.
6. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [BIXBY] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
7. Open Odin and place that TWRP tar file in the [AP] slot.
8. Connect your phone.
9. Hold [VOLUME UP] + [BIXBY] + [POWER] on your phone and then press start on Odin.
10. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [BIXBY] + [POWER] or you may not reboot into TWRP.
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/".
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs via TWRP.
Part 3 - HOW-TO ROOT:
1. Download the flashable zip.
- Option 1: Magisk
- Option 2: SuperSU (untested)
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Part 3a - HOW-TO FLASH CUSTOM ROMS:
1. Download the flashable zip.
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Simple.
where can i find firmware original
Sammobile
wakkaday said:
where can i find firmware original
Click to expand...
Click to collapse
Samfirm tool or updato.com. No download speed limits
wakkaday said:
where can i find firmware original
Click to expand...
Click to collapse
http://updato.com/firmware-archive-select-model?exact=1&q=SM-G950F
click on your Country and load the firmware.
free and high speed (maybe use download manager)

TWRP does not ask for pin

TWRP does not ask for pin, and therefore does not decrypt my storage.
How can I fix this?
Twrp has no security, it can't read anything encrypted, if you just installed it you have to wipe storage and start fresh, its in the twrp thread.
Looks like the Galaxy S8 TWRP is not fully functional yet. It asked me too for a PIN on my previous phone (Xiaomi MI5) and I could work with my encrypted /data partition in TWRP.
twrp is fully functioning you need to flash the dm-verity and force encryption disabler zip after instaling twrp and wiping data . follow the instructions found in the twrp thread
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
1. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
2. Download and extract Odin (Samsung's Flash Tool) to your computer.
3. Download a .tar image of TWRP.
4. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [BIXBY] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
5. Open Odin and place that TWRP tar file in the [AP] slot.
6. Connect your phone.
7. Hold [VOLUME UP] + [BIXBY] + [POWER] on your phone and then press start on Odin.
8. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [BIXBY] + [POWER] or you may not reboot into TWRP.
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
AT THIS STEP YOU CAN DIRECTLY GO TO PART 3 OF THIS GUIDE IF YOU WANT TO ROOT.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/".
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs, Kernels via TWRP
Just rooted my Note 8 and Twrp says my Storage is 0MB
Unable to flash anything using TWRP and Magisk root is unstable too, did you manage to fix this, mine is 0MB with a swipe lockscreen and a pin too.

[TWRP][HUAWEI Y7-Y7 PRIME] recovery and root

[TWRP][HUAWEI Y7-Y7 PRIME] recovery and root​
Follow at your own risk, i don’t take any responsibility if anything goes wrong
Files are developed by chinese developers, so there’s limited support for this device so far.
Your warranty will be void after root
Supported Devices:
tested devices: TRT-AL00, TRT-AL00A, TRT-TL10, TRT-TL10A, TRT-L21A, TRT-LX1, TRT-LX3
no tested devices: TRT-LX2, TRT-L03, TRT-L53
Note: on some devices touch screen does not work in TWRP mode, you are advised to use mouse with OTG connector to work in TWRP
Tutorial:
RECOVERY
1. Backup all important data
2. Unlock bootloader of your phone
3. Download FILES
4. Extract downloaded file on your computer
5. Power off phone, Hold volume down and insert cable. phone should enter fastboot mode.
6. Open MAF32 and type ” fastboot flash recovery TRT-TWRP-3.1.1-0818.img ” and press enter
7. Once installation completed. Disconnect from pc. and hold volume up and power, keep holding until you see TWRP screen.
8. Recovery will be in chinese, Tap on right side button, and choose 2nd option, recovery will be changed to English.
ROOT
9. Now swipe to allow modifications. (Advised to make backup in TWRP for safe side)
10. Then tap on advanced. and tap root button.
11. Swipe to install root.
12. Reboot phone to normal mode.
13. After several boots , your phone should be up and running.
14. Now go in settings > Application manager > super su > permissions and allow all permissions.
15. Done, now install any root checker to verify root access.
thanks so much bro it works
add trt-l53 ... + i bricked my trt-l53 does anybody have a backup on mega or gdrive i need the firmware please
astusal said:
[TWRP][HUAWEI Y7-Y7 PRIME] recovery and root​
Follow at your own risk, i don’t take any responsibility if anything goes wrong
Files are developed by chinese developers, so there’s limited support for this device so far.
Your warranty will be void after root
Supported Devices:
tested devices: TRT-AL00, TRT-AL00A, TRT-TL10, TRT-TL10A, TRT-L21A
no tested devices: TRT-LX1, TRT-LX2 TRT-LX3, TRT-L03
Note: on some devices touch screen does not work in TWRP mode, you are advised to use mouse with OTG connector to work in TWRP
Tutorial:
RECOVERY
1. Backup all important data
2. Unlock bootloader of your phone
3. Download FILES
4. Extract downloaded file on your computer
5. Power off phone, Hold volume down and insert cable. phone should enter fastboot mode.
6. Open MAF32 and type ” fastboot flash recovery TRT-TWRP-3.1.1-0818.img ” and press enter
7. Once installation completed. Disconnect from pc. and hold volume up and power, keep holding until you see TWRP screen.
8. Recovery will be in chinese, Tap on right side button, and choose 2nd option, recovery will be changed to English.
ROOT
9. Now swipe to allow modifications. (Advised to make backup in TWRP for safe side)
10. Then tap on advanced. and tap root button.
11. Swipe to install root.
12. Reboot phone to normal mode.
13. After several boots , your phone should be up and running.
14. Now go in settings > Application manager > super su > permissions and allow all permissions.
15. Done, now install any root checker to verify root access.
Click to expand...
Click to collapse
Hi Guys!!! I just root my device but it´s a little diferent the method, once you enter on advance, you have to tap install SU, it's take 3 tries to sucessfully instal Super SU, once Super SU installed the phone automatically reboot.
It's reboot a couple of time, and to check I install root checker and IT'S WORK!!!!!!!!
Thanks a lot for the help!!!!!TRT-LX3 check!!!!!! :laugh::laugh::laugh::laugh::laugh::laugh::laugh:
ADB-1 said:
add trt-l53 ... + i bricked my trt-l53 does anybody have a backup on mega or gdrive i need the firmware please
Click to expand...
Click to collapse
How to bricked your device?
Andrea_santiba said:
Hi Guys!!! I just root my device but it´s a little diferent the method, once you enter on advance, you have to tap install SU, it's take 3 tries to sucessfully instal Super SU, once Super SU installed the phone automatically reboot.
It's reboot a couple of time, and to check I install root checker and IT'S WORK!!!!!!!!
Thanks a lot for the help!!!!!TRT-LX3 check!!!!!! :laugh::laugh::laugh::laugh::laugh::laugh::laugh:
Click to expand...
Click to collapse
It's Great! ?
cryotick said:
thanks so much bro it works
Click to expand...
Click to collapse
What is your device?
ADB-1 said:
add trt-l53 ... + i bricked my trt-l53 does anybody have a backup on mega or gdrive i need the firmware please
Click to expand...
Click to collapse
+1 I also bricked mine (TRT-LX2) I need a backup or the hicloud download to stock rom
@astusal
Can you provide us the source of all of this ?
Is there a seperate SuperSU zip available ?
Thnx !
raystef66 said:
@astusal
Can you provide us the source of all of this ?
Is there a seperate SuperSU zip available ?
Thnx !
Click to expand...
Click to collapse
Check your inbox
ashd999 said:
+1 I also bricked mine (TRT-LX2) I need a backup or the hicloud download to stock rom
Click to expand...
Click to collapse
not have any backup but i searching for...
Look here for TWRP on TRT-LX3 with Magisk 15.3
https://www.youtube.com/watch?v=bnEA__fbZ6U
So basicly they use the twrp out of OP
So flash recovery in fastboot
Reboot into recovery (vol++power)
Backup !
Format data
Flash magisk
reboot
Run Magisk Manager
done !
METHOD FOR TRT-LX1
Thnx for the above files !
I just did following steps : (almost like OP but slightly different)
0. follow here
1. Download above package from OP, be sure to be bl unlocked and frp unlocked
1a. Put latest Magisk 15.3 and manager on your extSD or flash supersu from within twrp package. It will be your choice how to root (btw, supersu in this package has chinese characters above)
1b. enable usb debugging, connect phone...
2. Run adb (devices)...you know by now, right
3. run following commands :
a. adb reboot bootloader
b. fastboot flash recovery TRT-TWRP-3.1.1-0818.img
4. when flashed, disconnect phone, and hold vol+ + power to boot into twrp recovery, select english
5. back up all !
6. format data
7. install Magisk or SuperSU at choice from your extSD. NOTE : when flashed and you want to reboot, select : not install supersu
8. reboot. It will take some reboots but all ok :good:
Can anyone in this thread post their build number? I'm trying to use firmware finder to get the stock rom
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
Thanks.
astusal said:
What is your device?
Click to expand...
Click to collapse
I have a huawei y7 prime
Xposed Framework?
astusal said:
[TWRP][HUAWEI Y7-Y7 PRIME] recovery and root​
Follow at your own risk, i don’t take any responsibility if anything goes wrong
Files are developed by chinese developers, so there’s limited support for this device so far.
Your warranty will be void after root
Supported Devices:
tested devices: TRT-AL00, TRT-AL00A, TRT-TL10, TRT-TL10A, TRT-L21A, TRT-LX1, TRT-LX3
no tested devices: TRT-LX2, TRT-L03, TRT-L53
Note: on some devices touch screen does not work in TWRP mode, you are advised to use mouse with OTG connector to work in TWRP
Tutorial:
RECOVERY
1. Backup all important data
2. Unlock bootloader of your phone
3. Download FILES
4. Extract downloaded file on your computer
5. Power off phone, Hold volume down and insert cable. phone should enter fastboot mode.
6. Open MAF32 and type ” fastboot flash recovery TRT-TWRP-3.1.1-0818.img ” and press enter
7. Once installation completed. Disconnect from pc. and hold volume up and power, keep holding until you see TWRP screen.
8. Recovery will be in chinese, Tap on right side button, and choose 2nd option, recovery will be changed to English.
ROOT
9. Now swipe to allow modifications. (Advised to make backup in TWRP for safe side)
10. Then tap on advanced. and tap root button.
11. Swipe to install root.
12. Reboot phone to normal mode.
13. After several boots , your phone should be up and running.
14. Now go in settings > Application manager > super su > permissions and allow all permissions.
15. Done, now install any root checker to verify root access.
Click to expand...
Click to collapse
Have you been able to install xposed framework? Or still can not flash zips in these recoverys?
KevinFer said:
Have you been able to install xposed framework? Or still can not flash zips in these recoverys?
Click to expand...
Click to collapse
I installed xposed without problems. Running f.e. gravitybox without problem.
So flashing with this twrp is no problem.
Perhaps follow my post here.
Btw, for this device flash xposed sdk24
raystef66 said:
I installed xposed without problems. Running f.e. gravitybox without problem.
So flashing with this twrp is no problem.
Perhaps follow my post here.
Btw, for this device flash xposed sdk24
Click to expand...
Click to collapse
could you pass me the files that I have to flash to install the xposed in the huawei y7 trt-lx3 pleasee!
KevinFer said:
could you pass me the files that I have to flash to install the xposed in the huawei y7 trt-lx3 pleasee!
Click to expand...
Click to collapse
See here : https://forum.xda-developers.com/showthread.php?t=3034811
So flash : http://dl-xda.xposed.info/framework/sdk24/arm/ take the v89 http://dl-xda.xposed.info/framework/sdk24/arm/xposed-v89-sdk24-arm.zip
And flash the installer from the thread.
That's all !
I see strange folders when looking for zip files
https://ibb.co/gVOOUG
---------- Post added at 03:39 PM ---------- Previous post was at 03:31 PM ----------
can I put the files in the root and flash from there?
https://ibb.co/jjvTUG

Samsung gt-p7320 upgrade or jailbreak

hi,everyone.
I have a very old samsung tablet which is gt-p7320, the operation system is 4.0.2? As the OS is too old,I can’t download any apps from Google Play Store. I wanna upgrade it to the latest OS or jailbreak. Do you have any sources for me? Thank you very much
Use at your own risk. It could brick your tablet.
1. Download and install kingroot
https://kingroot.en.uptodown.com/android/download
2. Install this app (rashr) too
https://m.apkpure.com/root-rashr-flash-tool/de.mkrtchyan.recoverytools
3. Go into kingroot, setup the app, and press the menu(three short lines icon), then press on 'try root'
4. Wait until it is rooted
5. Open rashr, it will ask for root access, allow it
6. Extract this zip on computer
https://forum.xda-developers.com/attachments/twrp3020-20160927-p5-zip.5150177/
And find the recovery.img file in that zip. Then move it to the tablet using USB cable.
7. Back to your tablet, choose 'recovery from internal storage' navigate to the recovery.img, and press flash
8. Select reboot to recovery
9. Wait until it booted into recovery
10. Wipe and factory reset
11, press back and back
12. Download the aosp-7.1-p5 zip, and P7500-open-gapps.zip at here on pc
1.04 GB folder on MEGA
11 files
mega.nz
13. Move the aosp 7.1 zip to the tablet
14. Flash, and select the TWRP zip
15. After complete, press back and back, and select back and move the P7500-open-gapps to the tablet
16.flash and select p7500 opengapps zip
17 reboot system

Categories

Resources