hello everyone, i'm searching for a custom rom for my lovely SM-J320M, stable roms without bugs with connectivity or no bugs if possible, and i'm making this with my main device, if this smartphone broke i won't have another smartphone too early
4NIZIO said:
hello everyone, i'm searching for a custom rom for my lovely SM-J320M, stable roms without bugs with connectivity or no bugs if possible, and i'm making this with my main device, if this smartphone broke i won't have another smartphone too early
Click to expand...
Click to collapse
From what I can find, the difference from your J320M vs the J320FN is negligible...
Differences:
SM-J320FN
NFC Enabled
Bluetooth 4.0
SM-J320M
No NFC (battery swap can change this)
Bluetooth 4.1
Give this rom a try... I'm pretty sure people with the M variant have flashed FN/F ROMs successfully.
OctOS by PixelBoot (Originally by [email protected])
Disclaimer: Do this at your own risk, I'm not responsible for any damage you may cause to your device. I'm not trying to scare you, just covering my back)
I recommend OctOS as I have found it to be very stable and so have others. It has even been mentionned in the OP in regards to how rock solid it is.
CoreyOS said:
From what I can find, the difference from your J320M vs the J320FN is negligible...
Differences:
SM-J320FN
NFC Enabled
Bluetooth 4.0
SM-J320M
No NFC (battery swap can change this)
Bluetooth 4.1
Give this rom a try... I'm pretty sure people with the M variant have flashed FN/F ROMs successfully.
OctOS by PixelBoot (Originally by [email protected])
Disclaimer: Do this at your own risk, I'm not responsible for any damage you may cause to your device. I'm not trying to scare you, just covering my back)
I recommend OctOS as I have found it to be very stable and so have others. It has even been mentionned in the OP in regards to how rock solid it is.
Click to expand...
Click to collapse
existe mais alterações, como um chip nele que tem os números diferente, só pesquisar.
Link
CoreyOS said:
From what I can find, the difference from your J320M vs the J320FN is negligible...
Differences:
SM-J320FN
NFC Enabled
Bluetooth 4.0
SM-J320M
No NFC (battery swap can change this)
Bluetooth 4.1
Give this rom a try... I'm pretty sure people with the M variant have flashed FN/F ROMs successfully.
OctOS by PixelBoot (Originally by [email protected])
Disclaimer: Do this at your own risk, I'm not responsible for any damage you may cause to your device. I'm not trying to scare you, just covering my back)
I recommend OctOS as I have found it to be very stable and so have others. It has even been mentionned in the OP in regards to how rock solid it is.
Click to expand...
Click to collapse
so, where i found the link for download this rom for my device
4NIZIO said:
so, where i found the link for download this rom for my device
Click to expand...
Click to collapse
You've just quoted the link to the forum... But here ya go: https://drive.google.com/file/d/1mPuZwYEjaCA2Sz2hldKZdH70rkuyJAHx/view
---------- Post added at 08:47 AM ---------- Previous post was at 08:45 AM ----------
G0K4LT3 said:
existe mais alterações, como um chip nele que tem os números diferente, só pesquisar.
Click to expand...
Click to collapse
English only, please read XDA rules
j320m question
the j320m needs a kernel to be able to run roms of other variants --- "j3xlte is the only one and the others ----" j3xnlte is different. but I do not see anyone's interest here on the part of xda in supporting j3xlte, it is equal to j320f the difference between is the dual-sim question
---------- Post added at 09:46 PM ---------- Previous post was at 09:41 PM ----------
j320m needs to have a kernel adapted to it to be able to run F roms not those of the FN. there is also the variant G which is dual sim. I tested roms of fn and f in M, but I was stuck to the bootanimation of the roms that I installed
---------- Post added at 09:49 PM ---------- Previous post was at 09:46 PM ----------
I tried to port the stock kernel from F to M, but I did not need to know what files make the initiation of the roms. j320m only has lineage with own kernel and not for samsung stock
Maybe you can try the los14.1.
With this recovery => https://drive.google.com/open?id=1oR0TVX5038JWdCVA3AlU5DdLanYt7DeS
And the j3xlte version available here => https://forum.xda-developers.com/showpost.php?p=77584170&postcount=1574
@CyrcleOneX You do not have the kernel source code on the samsung open source site ?
Yep one version for ll, you can compare the configuration with a version ll for the sm-j320f.
finally a rom pro j3xlte, although I think it is not very difficult to make roms pro j3xlte; remains to expect the same thing to happen but with a samsung stock. Congratulations to the developers xda
Nope it's easy, I just removed the nfc and I changed the most important option this => https://github.com/djeman/android_k...m-14.1/arch/arm/configs/j3xlte_defconfig#L362
When you check dts files => https://github.com/djeman/android_kernel_samsung_sharkls/tree/cm-14.1/arch/arm/boot/dts
You can see that it's a kernel for the scx35l board codename sharkls for some samsung devices (gtexslte, j1acevelte, j1minilte, j3xlte and j3xnlte).
then it is impossible to use the roms made for j3xnlte in j3xlte. my expectations were those of being able to use roms from j3xnlte in j3xlte - but it seems that it is not possible, there is a version of samsung stock 6.0 ported to j3xnlte but it has not pro j3xlte. congratulations.. thank you
---------- Post added at 12:52 AM ---------- Previous post was at 12:45 AM ----------
Wow, that's not easy at all. j3xlte is too complicated, but now we have the LOS14.1 made for it, I hope in brevity j3xlte will be awarded with new custom roms.. Thanks you
Maybe it's only a problem with dts/dtb files ... I don't know I have a fn.
But bad dts/dtb files can make a bootloop.
I got a bootloop when I developed the rom with a memory overflow caused by the ril that got a bad configuration in the dts file.
the j3xlte LOS 14.1 version has relevant bugs or bugs?
---------- Post added at 01:06 AM ---------- Previous post was at 01:05 AM ----------
Congratulations on your work, happy with that and happy for that information.
it would be possible to use RE Dream UX V3 on the j320m pq and a port of the samsung 6.0 stock for j3xnlte, but it has no pro j3xlte a kernel would solve this because the boot.img of the LOS 13 does not run
LOS 14.1 in J320M?
djeman said:
Maybe you can try the los14.1.
With this recovery => https://drive.google.com/open?id=1oR0TVX5038JWdCVA3AlU5DdLanYt7DeS
And the j3xlte version available here => https://forum.xda-developers.com/showpost.php?p=77584170&postcount=1574
@CyrcleOneX You do not have the kernel source code on the samsung open source site ?
Yep one version for ll, you can compare the configuration with a version ll for the sm-j320f.
Click to expand...
Click to collapse
if i can understand u had ported LOS 14.1 for the J320M by swaping the kernel and removing nfc function right?
I explained here => https://forum.xda-developers.com/showpost.php?p=77586742&postcount=9
So yep a kernel with one option changed (the platform selected ^^) that include some little changes in the kernel code but especially that includes differents dts files.
I think the nfc is not important to get a boot.
I not modified the ramdisk, the nfc is launched by an apk.
You can check the source code => https://github.com/djeman
the j320m is doing well at customs, but it needs a f or fn-based kernel, it already has the RE DREAM UX but it is not j3xlte, and the boot13img of LOS13 only takes the bootanimation is no more than the name "samsung" the boot.img of LOS 14.1 is not good for this rom to start
the good of the variant M which is about it is the same as other j3xlte (for example: j320f and j320g which are respectively j3xltejt and j3xltedx, but not to the fn that besides being different, its basis is j3xnlte that although it is not difficult to compile roms its the closest version that is the j320f, but by chance it does not work on the j320m if ported from fn pro f, what happens.
@djeman If you have any interest in helping us , https://t.me/joinchat/JbS-r1EavaoM5oB0zGk6Pg
Bluetooth does not work properly. CONNECT DISCONNECT HELP!!!
SM-J320M
Related
CM 14 is here
(Try at ur own risk)
Version of Android - 7.0
Kernel Version - 10/03/54
The real Android N for our device.
This test assembly! Laid out for reference only!
It takes time to appear less stable assembly.
Bug
the major:
Camera (recover in the next build.)
Wi-Fi access (get better in the next build.)
Secondary:
It does not work dialer (when trying to call USSD command or number - reboot) (recover in the next build.)
Not working Bluetooth (all time failure, cyclical)
No flashlight (due to camera)
No radio (to recover the trail. assemblies)
Mostly nedoperevod (recover in the trail. assemblies)
How to
Installation is carried out through TWRP 3.0+ or through PhilZ Touch Recovery, over 5 BETA (for the first installation, not necessarily to follow)
1) Download the firmware, put it in the root directory of the cd-cards.
2) Turn your smartphone into recovery mode and do the wipes are: Dalvik / ART Cache, System, Cache, Data.
3) Go to "Setting" and select the firmware start the installation.
4) After successful installation, go back to "Setting" and set Gapps. It is necessary to work and play market services google
Links
https://yadi.sk/d/LN_X2qoEvFTCp
https://yadi.sk/d/jQUYqJKfvDYov (flash immediately after installation)
For gapps use arm 7 pico(not necessary anyway alpha build)
http://4pda.ru/forum/index.php?showtopic=599456&view=findpost&p=53194469
Credits
Qwanor - assembly firmware, kernel build (another device)
max127328
Chaiko Dima
ariafan - kernel sources
Zormax - for the project CM12.1 / 13 mt6582
@skydroid - Top team
Reserved
Reserved 2
So glad to see nougat turning up. Thank you.
Can you explain what's 5 BETA in the instructions?
GreyRainbow said:
So glad to see nougat turning up. Thank you.
Can you explain what's 5 BETA in the instructions?
Click to expand...
Click to collapse
Ariafan explay fresh base beta 5
https://www.androidfilehost.com/?fid=24052804347830265
awesome ! i had never think we would have nougat on my old rainbow !
i can't wait to see a more stable version !
btw thanks for the link for beta 5 i couldn't find it elsewhere
New build - https://yadi.sk/d/sYCO8YiYvU7vx
Working:
Wi-fi, bluetooth, dialer, radio
Not working:
Camera, no root, video Decoding, no IMEI
Wow very excited to see a stable nougat for my rainbow. Thanks for the share.
hvrj said:
New build - https://yadi.sk/d/sYCO8YiYvU7vx
Working:
Wi-fi, bluetooth, dialer, radio
Not working:
Camera, no root, video Decoding, no IMEI
Click to expand...
Click to collapse
Well I flashed it IMEI is working but data not.
Plz notify us if there is a new build so I test it.
please make a version that uses the sp tool thanks =)
Any news bout this rom.
ilmentor said:
Any news bout this rom.
Click to expand...
Click to collapse
You can check Explay Fresh on 4pda.ru . Latest updates for Explay Fresh reach there first.
http://4pda.ru/forum/index.php?showtopic=599456&st=16100
You can use Google Translate to translate the whole website.
port
can i port it to another mt6582 ?
saroj-lava said:
can i port it to another mt6582 ?
Click to expand...
Click to collapse
Yes, you probably can.
If you're interested in porting different roms then I suggest mtkroms.com
saroj-lava said:
can i port it to another mt6582 ?
Click to expand...
Click to collapse
No you can not.
Here a special kernel, which is not enough at whom there
i have try to fix some bugs, but no luck yet, the only thing i fix was the messaging apk replacing for Google messaging apk.
I also try to port the rom to wiko base, but also no luck, and i have try to root but every time i root the device reboots and stay at boot loop.
Someone can help, the things i have try to fix was 3G, GPS and root access.
Plz sir help me my phone is upgrade nought plz help
---------- Post added at 09:35 AM ---------- Previous post was at 09:34 AM ----------
Kcala can you help me plz add this whatts apps number 03446940167
waseemmajeed said:
Plz sir help me my phone is upgrade nought plz help
---------- Post added at 09:35 AM ---------- Previous post was at 09:34 AM ----------
Kcala can you help me plz add this whatts apps number 03446940167
Click to expand...
Click to collapse
Dude if you are speaking bout this ROM .It's not stable don't use it .
Don't flash Gapps error 70 ayta ha plz help me sir
News
any news?
BY WAISER
Kind time of the day dear friends, I bring to your attention the port of the firmware, for those wishing to feel what is android 8.
But this article is not only for this, but for that, to find like-minded people and jointly finish the remaining problems.
The author of the firmware for Redmi 3s [ TeamMex ], for which thanks to him!
The author of the custom core for Redmi 4x [ IsaacChen ], for which he too thanks!
By me [ WAISER ] - only was ported with Redmi 3s.
And so, what is the essence of this post, yes it can be read, then you will see a link to the working archive.
I conducted experiments:
1) I tried to start on the stock core - unsuccessfully.
2) I tried to start on the core of IsaacChen - successfully.
3) Throwed aside, to raise the mobile network, sound, flashlight on Oreo - unsuccessfully
4) Rules builld.prop, that would raise the mobile network on Oreo - unsuccessfully
5) Throwing vendors, bin, xbin all that is connected rIL (mobile network) to Oreo - unsuccessfully.
etc.
A regularity is noted:
When using the kernel from IsaacChen , on the android 7.1.1 Nugat.
On the stock firmware and not only , falls WIFI, flashlight, sound, but the mobile network on [7.1.1 Nugat] - works
On the 8th android (OREO), the sound does not work, the mobile network, the flashlight, the rest - it works.
And so, I understand that the reason in the core, the sound exactly, that it does not work on that one, or on this firmware,
but I do not rule out the possibility that it's possible in libraries or on a ram disk ..
There was a question, how to start all the same mobile network, flashlight and imprint on Oreo for Redmi 4x, I think these problems are fixable, because it works on the nougat.
Well, now, for what we are gathered:
Known bugs:
- Sound
- Sepolicy permissive
- Camera
- Imprint
What works now:
- Sound from the player in headphones (but not on the speaker)
- WIFI
- Communication
- Bluetooth
- And so on.
DOWNLOAD
gapps 8.0
REVIeW on YouTube
Hope kernel source released soon!
1st !!
Great work guys...
Android 8.0 ... Am excited !!!!!
Hope xiaomi release kernel sources so we could develop nethunter kernel.
Great Work guys ... 1st android 8.0 rom ... Hope Xiaomi release kernel sources so we could get beta and stable builds .
Awesome guys keep up the great work Cheers!!
Screenshot please ...
Sent from my Redmi 4X using Tapatalk
fooiskandar said:
Screenshot please ...
Sent from my Redmi 4X using Tapatalk
Click to expand...
Click to collapse
review link added:good:
psdashing said:
review link added:good:
Click to expand...
Click to collapse
Yup thanks ... But i wanna to know more about worked and no worked in this rom ... Couse the content is not completed ...
Sent from my Redmi 4X using Tapatalk
rkdok23 said:
Great Work guys ... 1st android 8.0 rom ... Hope Xiaomi release kernel sources so we could get beta and stable builds .
Click to expand...
Click to collapse
Even am waiting for kernel sources Want nethunter supported kernel...
---------- Post added at 05:37 PM ---------- Previous post was at 05:35 PM ----------
psdashing said:
review link added:good:
Click to expand...
Click to collapse
Dude it says Download limit reached... Please upland on Android file host please.
Also please develop Nethunter kernel as sources get released....
tubeflashy said:
Even am waiting for kernel sources Want nethunter supported kernel...
---------- Post added at 05:37 PM ---------- Previous post was at 05:35 PM ----------
Dude it says Download limit reached... Please upland on Android file host please.
Also please develop Nethunter kernel as sources get released....
Click to expand...
Click to collapse
- create account at Yandex and download it
fooiskandar said:
Yup thanks ... But i wanna to know more about worked and no worked in this rom ... Couse the content is not completed ...
Sent from my Redmi 4X using Tapatalk
Click to expand...
Click to collapse
- any type of camera is not working
-file manager having problems in accessing files
-fingerprint highly unstable
-speakers are not working but headset works
WoW. Amazing
new fix Sound on the speaker , LTE works and Fix buttons and Fix system sounds
hi guys
new fix for this rom
In the new fixes, it was possible to raise the network, LTE works . Sound on the speaker yet.
Fix buttons and Fix system sounds (Works in headphones) Thanks Poxer1933
psdashing said:
BY WAISER
Kind time of the day dear friends, I bring to your attention the port of the firmware, for those wishing to feel what is android 8.
But this article is not only for this, but for that, to find like-minded people and jointly finish the remaining problems.
The author of the firmware for Redmi 3s [ TeamMex ], for which thanks to him!
The author of the custom core for Redmi 4x [ IsaacChen ], for which he too thanks!
By me [ WAISER ] - only was ported with Redmi 3s.
And so, what is the essence of this post, yes it can be read, then you will see a link to the working archive.
I conducted experiments:
1) I tried to start on the stock core - unsuccessfully.
2) I tried to start on the core of IsaacChen - successfully.
3) Throwed aside, to raise the mobile network, sound, flashlight on Oreo - unsuccessfully
4) Rules builld.prop, that would raise the mobile network on Oreo - unsuccessfully
5) Throwing vendors, bin, xbin all that is connected rIL (mobile network) to Oreo - unsuccessfully.
etc.
A regularity is noted:
When using the kernel from IsaacChen , on the android 7.1.1 Nugat.
On the stock firmware and not only , falls WIFI, flashlight, sound, but the mobile network on [7.1.1 Nugat] - works
On the 8th android (OREO), the sound does not work, the mobile network, the flashlight, the rest - it works.
And so, I understand that the reason in the core, the sound exactly, that it does not work on that one, or on this firmware,
but I do not rule out the possibility that it's possible in libraries or on a ram disk ..
There was a question, how to start all the same mobile network, flashlight and imprint on Oreo for Redmi 4x, I think these problems are fixable, because it works on the nougat.
Well, now, for what we are gathered:
Known bugs:
- Sound
- Sepolicy permissive
- Camera
- Imprint
What works now:
- Sound from the player in headphones (but not on the speaker)
- WIFI
- Communication
- Bluetooth
- And so on.
DOWNLOAD
gapps 8.0
REVIeW on YouTube
Click to expand...
Click to collapse
Источник на русском, было бы не плохо
d.alimoff86 said:
Источник на русском, было бы не плохо
Click to expand...
Click to collapse
yeah, russian team
psdashing said:
yeah, russian team
Click to expand...
Click to collapse
From xr4x.ru
nice one, hope this gonna be stable and can be used for daily
psdashing said:
yeah, russian team
Click to expand...
Click to collapse
Do you use 7.1 kernel to port this rom ??
Can not save, upload, download picture
unknown said:
Do you use 7.1 kernel to port this rom ??
Click to expand...
Click to collapse
Not
Fixing Storage!
mojikey said:
hi guys
new fix for this rom
In the new fixes, it was possible to raise the network, LTE works . Sound on the speaker yet.
Fix buttons and Fix system sounds (Works in headphones) Thanks Poxer1933
Click to expand...
Click to collapse
Thanks buddy , Hope Storage fix also come soon....
---------- Post added at 06:21 PM ---------- Previous post was at 06:20 PM ----------
I tested the ROM :-
https://youtu.be/tWh8IwUCVPA
Here is the review of all bugs..
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code review
Treble spported TWRP by ATGdroid
Download>https://androidfilehost.com/?fid=5862345805528059847
LineageOS v15.1 Unofficial TREBLE ENABLED Rom by @thestrechh
Build Date-: 28/07/2018
Changelog:
* LineageOS source update
* Fix audio in calls, BT, jack (no tested) in GSI ROMS.
Download:
https://drive.google.com/file/d/1o2OJ2d5Niu4rlQv1yVrWmhCyZkr3A4_M/view
Carlos' today treble build Vendor + Kernel only Based on LOS
Download Link-:
https://drive.google.com/file/d/17loTYfZmcPjYy9Lh9kB-CfEv5-1ogTLa/view
Note-:
=>"Vendor + kernel only" no system
Subscribe @kenzoromnews for more
How to flash. First flash trouble supported TWRP.
Flash treble supported ROM=GApps. Flash reboot enjoy.
Note: this is not my work I am just sharing this build to all credit the. @strechh Dav well done
Will try this
LineageOS v15.1 Unofficial TREBLE ENABLED Rom by @thestrechh
Build Date-: 28/07/2018
Changelog:
* LineageOS source update
* Fix audio in calls, BT, jack (no tested) in GSI ROMS.
Download:
lineage-15.1-20180728-UNOFFICIAL-kenzo.zip
Subscribe @kenzoromnews for more
arnabbandopadhyay said:
Will try this[/Q
UOTE
Ok
Click to expand...
Click to collapse
What do you mean today's treble build vendor is it new vendor build or same as alex9 build
Wait downloading links
sharan565 said:
What do you mean today's treble build vendor is it new vendor build or same as alex9 build
Click to expand...
Click to collapse
Yes
Azizbagwan said:
Yes
Click to expand...
Click to collapse
New vendors? So what are the changes?
I'm already on alex9 vendors with dot os GSI system can I flash your vendor only or do I need to flash your los rom
anybody tried resurrection remix or havoc gsi with this vendor?
is volte working?
is headphone bug solved?
share your experiences?
Will the treble builds have Mobile Network Standby battery drain issue?
First people were crying 'treble for kenzo' now there is some beta rom, they are not ready to try it out asking for bugs, if none will try, how will we know bugs ? Can't expect bugless & stable treble rom i you are not ready to test it
vatsal_chandan said:
First people were crying 'treble for kenzo' now there is some beta rom, they are not ready to try it out asking for bugs, if none will try, how will we know bugs ? Can't expect bugless & stable treble rom i you are not ready to test it
Click to expand...
Click to collapse
Wait... Downloading...
---------- Post added at 12:18 PM ---------- Previous post was at 12:17 PM ----------
Thank you for the awesome rom... Will report after testing
unable to install... error 7 every time
Azizbagwan said:
Note: this is not my work I am just sharing this build to all
Click to expand...
Click to collapse
Thread moved as sharing is not development
@Azizbagwan thanks for sharing! But could you tell us where you got that rom and vendor+boot zip. Did you extract vendor yourself? If yes, from where?
---------- Post added at 08:08 PM ---------- Previous post was at 08:06 PM ----------
harshalsingh1990 said:
unable to install... error 7 every time
Click to expand...
Click to collapse
Are you using the twrp linked here?
jame02 said:
@Azizbagwan thanks for sharing! But could you tell us where you got that rom and vendor+boot zip. Did you extract vendor yourself? If yes, from where?
---------- Post added at 08:08 PM ---------- Previous post was at 08:06 PM ----------
Are you using the twrp linked here?
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=5862345805528059847 yes this twrp I am using perfect treble twrp
jame02 said:
@Azizbagwan thanks for sharing! But could you tell us where you got that rom and vendor+boot zip. Did you extract vendor yourself? If yes, from where?
---------- Post added at 08:08 PM ---------- Previous post was at 08:06 PM ----------
Are you using the twrp linked here?
Click to expand...
Click to collapse
i did... maybe the file i downloaded got corrupted... i installed arrow gsi... when i installed vendor+kernel before gsi... on booting the device was encrypted... couldn't get to main screen... again, did all wipes, installed gsi and this time kernel+vendor after... the rom booted... said there was an error in vendor... after that the rom worked absolutely fine... only bt calls and volte not working... rest all, almost perfect
It shows me "A vendor image mismatch has been de
tected. Typically this means your vendor
image is out of date. Please ensure your
vendor image matches OPM2.171026." when I reboot my phone
Deng Baohua said:
It shows me "A vendor image mismatch has been de
tected. Typically this means your vendor
image is out of date. Please ensure your
vendor image matches OPM2.171026." when I reboot my phone
Click to expand...
Click to collapse
it will... for a while now... till all the bugs are fixed... but, rest works alright?
harshalsingh1990 said:
it will... for a while now... till all the bugs are fixed... but, rest works alright?
Click to expand...
Click to collapse
I want to flash a new gsi and then reply to you.
Valence Rom
Features
Highly Debloated(4gb free after installing the rom)
Deknoxed
Odexed
Busybox Added
Init.d Support Added
Init.d mods added
ADB mount Support Added
CSC modded
OneUi themed
S8 launcher
Camera Mods Added
Based on Samsung Official on5 marshmallow firmware
Kernel permissive
S10 ringtones
VoLTE
WiFi Calling also added
BUGS
Alarm doesn't work on the stock clock app
OneUI theme is a bit buggy (They can switch to stock by changing the theme in settings)
Downloads
Google Drive - https://drive.google.com/open?id=1wavqY_7Gha3dMa6_OdYKf2jEslEqRyWy
Special Thanks To :-
Inkiluz for creating the ROM
Albe96 and Comrade79 for the guidance of fixing the ROM
Mir Yakub Ali for testing out the ROM
XDA:DevDB Information
Valence ROM, ROM for the Samsung Galaxy J2
Contributors
jbsjoshua007, Inkiluz, Albe96, Comrade79
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Alpha
Current Stable Version: V1
Stable Release Date: 2019-05-20
Created 2019-05-20
Last Updated 2019-05-21
downloading... will try it soon...
Woah man! Kudos!! This is like a dream rom come true.. But Is safetynet fixed or not?
Tried it very lite ?
Missing so many features that are not even heavy for the phone
overall this rom is a smooth rom, larger empty space compared to other roms.
The only issue i've met is the strength of GPS Signal, my GPS blue dot was jumped around my real location frequently, even i connected to strong wifi connection.
But overall.... it's smooth dude, thanks for your good job :good:
Fabulous rom bro loved it
there is for J200G support?
have multiwindow ?
Does it work on J2 Prime SM-G532MT ? this rom looks awesome, and it would be cool to have a rom like this on this device.
im gonna try it on my j200f phone right now
Hey dude i found a Bug.. Everytime i open app permissions it always say "package installer has stopped" even if i "forced stop" the package installer its still not working but overall this rom is so smooth.. Hope this could be fixed right away..
i flashed to my phone this rom its nicely stable rom but some features doesnt work like theme store and ultra power saving mode
Thank bro. testing.....:good:
But still banking apps work just install magisk and apply magisk hide
---------- Post added at 10:43 AM ---------- Previous post was at 10:27 AM ----------
Omegamoney said:
Does it work on J2 Prime SM-G532MT ? this rom looks awesome, and it would be cool to have a rom like this on this device.
Click to expand...
Click to collapse
No it is for j200g only
---------- Post added at 10:50 AM ---------- Previous post was at 10:43 AM ----------
Ŕu§hi said:
Woah man! Kudos!! This is like a dream rom come true.. But Is safetynet fixed or not?
Click to expand...
Click to collapse
No saftey net is not fixed but
Banking apps work install magisk and apply magisk hide
Work on j200H
does anyone have the galaxy j2's telegram group link?
Reserved
Hello, can anyone suggest me for STABLE CUSTOMROM for Samsung J2 Prime SM-G532G ..
I am a new Samsung user before using KENZO (Redmi note3) ... Thanks if help me
jbsjoshua007 said:
Valence Rom
Features
Highly Debloated(4gb free after installing the rom)
Deknoxed
Odexed
Busybox Added
Init.d Support Added
Init.d mods added
ADB mount Support Added
CSC modded
OneUi themed
S8 launcher
Camera Mods Added
Based on Samsung Official on5 marshmallow firmware
Kernel permissive
S10 ringtones
VoLTE
WiFi Calling also added
BUGS
Alarm doesn't work on the stock clock app
OneUI theme is a bit buggy (They can switch to stock by changing the theme in settings)
Downloads
Google Drive - https://drive.google.com/open?id=1wavqY_7Gha3dMa6_OdYKf2jEslEqRyWy
Special Thanks To :-
Inkiluz for creating the ROM
Albe96 and Comrade79 for the guidance of fixing the ROM
Mir Yakub Ali for testing out the ROM
XDA:DevDB Information
Valence ROM, ROM for the Samsung Galaxy J2
Contributors
jbsjoshua007, Inkiluz, Albe96, Comrade79
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Alpha
Current Stable Version: V1
Stable Release Date: 2019-05-20
Created 2019-05-20
Last Updated 2019-05-21
Click to expand...
Click to collapse
Well, i did full wipe along with internal storage but I am not getting 4gb space free, only about 3gb.
Frustrating! Tho it is the fastest rom for j200g in MM version and everything else is cooler, smoother and faster?
hai friends
i compile android kernel for enable monitor mode myself and successfuly flash in redmi note 4 (mido) SD
it's working fine i tested my self
working on both kali nethunter and andrax
see screenshot here - https://drive.google.com/open?id=1ft0CVOIBHAF42Q9npoAgegjJ9nAy4Dnv
i worked hard to make this kernel support me
if you like my work donate me - https://paypal.me/kesava416 :angel:
requriments:
1.unlock bootloader - https://youtu.be/4EZEC67pOGk
2.custom rom oero (AospExtended) - https://downloads.aospextended.com/mido/ download oero rom
3.recovery (orange fox recovery) - https://youtu.be/EAkVl-gpNGU or https://youtu.be/WFU-44qRXes
4.install magsik manager - https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
5.any external wifi adapter with support monitor mode (alfa,panda) i am using panda (PAU06)
features:
support external wifi card support
supported chipset - atheros and ralink
installation:
before doing this process must take backup if anything worng means
to avoid bootloop
1.copy kernel into internal storage
2.then flash kernel by orange recovery
3.wipe && cache
4.reboot
5.now open magsik manager apk -
6.go to downloads find wireless Firmware for nethunter
7.install zip file and reboot
8.now connect wifi adapter to your phone (panda wireless PAU06) working for me
9.now give command airmon-ng on andrax or kali nethunter
you got wlan1
see screenshot here - https://drive.google.com/open?id=1CHlZ5Pay5XwvM2a6wqg6PaVrvoleNM3m
dragonfist kernel for oreo only - https://drive.google.com/open?id=18GzflxQhVNtxcgkloAY36sialJjH1pIt
if you like my work donate me - https://paypal.me/kesava416 :angel:
support me i make kernel for pie rom also thanks for watch this post
support my channel i will make video how to compile android kernel
Not working
This is not working in my redmi note 4..
azazarfin03 said:
This is not working in my redmi note 4..
Click to expand...
Click to collapse
Which rom are you using bro.....? your drivers not dectected or you got boot loop tell me i need to fix pblms reply me bro
Please help me, this kernel not work on my phone, specification my phone
Xiaomi redmi note 4 (mido)
LineageOS 15.1
Kernel linux 3.18.71
Please help me master:crying:
mr.mats said:
Please help me, this kernel not work on my phone, specification my phone
Xiaomi redmi note 4 (mido)
LineageOS 15.1
Kernel linux 3.18.71
Please help me master:crying:
Click to expand...
Click to collapse
Bro i told you use AOSP extented Oreo Rom bro
dragonfist69 said:
Bro i told you use AOSP extented Oreo Rom bro
Click to expand...
Click to collapse
Okay bro i can try this
Thanks for you help
---------- Post added at 03:05 PM ---------- Previous post was at 02:57 PM ----------
I can download rom aosp extended oreo or pie?
dragonfist69 said:
Bro i told you use AOSP extented Oreo Rom bro
Click to expand...
Click to collapse
I was use aosp extended still not work
i use tplink tl wn722n
mr.mats said:
I was use aosp extended still not work
i use tplink tl wn722n
Click to expand...
Click to collapse
tplink v2 cannot support bro.....
mr.mats said:
I was use aosp extended still not work
i use tplink tl wn722n
Click to expand...
Click to collapse
Try another wiifi adapter with monitor mode support
dragonfist69 said:
Try another wiifi adapter with monitor mode support
Click to expand...
Click to collapse
Ohh no i was buy tplink tl wn722n v2 ):
---------- Post added at 08:42 PM ---------- Previous post was at 08:41 PM ----------
Whats you wifi adapter?
mr.mats said:
Ohh no i was buy tplink tl wn722n v2 ):
---------- Post added at 08:42 PM ---------- Previous post was at 08:41 PM ----------
Whats you wifi adapter?
Click to expand...
Click to collapse
Panda wifi adapter but not working properly u buy some alfha wifi adapter
Can you please specify which chipsets of wifi adapters are supported by the kernel so that we can shortlist the best adapters among them. like rt5372 from ralink is supported. any onther chipset?
Amazing~
I saw your video on youtube and you did a great job
I was trying to build myself, especially for PIE,
But I never succeed.
Now I will watch your video and I will trying to compile for PIE
And sir, please make a tutorial
Thanks
v1da said:
Amazing~
I saw your video on youtube and you did a great job
I was trying to build myself, especially for PIE,
But I never succeed.
Now I will watch your video and I will trying to compile for PIE
And sir, please make a tutorial
Thanks
Click to expand...
Click to collapse
Wait for it i will make it bro
thank you
Hi I tried this kernel in miui caustom rom global and successfully unlocked monitormode
call me
[email protected]
---------- Post added at 11:40 AM ---------- Previous post was at 11:37 AM ----------
dragonfist69 said:
Panda wifi adapter but not working properly u buy some alfha wifi adapter
Click to expand...
Click to collapse
Hi I tried this kernel in custom miui rom android pie and successfully unlocked monitormode
but only alfa adaptor . i tried tplink 722 not workink
video
v1da said:
Amazing~
I saw your video on youtube and you did a great job
I was trying to build myself, especially for PIE,
But I never succeed.
Now I will watch your video and I will trying to compile for PIE
And sir, please make a tutorial
Thanks
Click to expand...
Click to collapse
where is video bro?
thanks
thank you brother . orginal post . please realse supprt tplink wifi card . :good::fingers-crossed:
anyone hava andrax apk + corp ? can u put a link to it ? plz
mhd 12 said:
anyone hava andrax apk + corp ? can u put a link to it ? plz
Click to expand...
Click to collapse
Andrax was closed right now andrax restart agian in may 2021
Hey, great work - will this also work on Redmi Note 8 also?