So after some water damage my loudspeaker can't produce loud sound,it starts to crackle above 75% of volume.
So I want to permanently lower the volume which is usually done by modifying mixer_path.xml values.
But in latest MIUI 8.5.24 I can't find anything like mixer_path in /system/etc
So where can I find it?
if it's not there,is there any way to permanently lower the loudspeaker volume of the device?
The file you want to edit is mixer_paths_tasha.xml ...
This is the file that holds the configurations for volumes...
alexmanu1 said:
The file you want to edit is mixer_paths_tasha.xml ...
This is the file that holds the configurations for volumes...
Click to expand...
Click to collapse
Yes I searched for that too.
But anything starting with "mixer_path" doesn't exist in /system/etc folder in MIUI 8.5.24
Though it was present in AEX.
Jongla said:
Yes I searched for that too.
But anything starting with "mixer_path" doesn't exist in /system/etc folder in MIUI 8.5.24
Though it was present in AEX.
Click to expand...
Click to collapse
You tried in vendor? Might be there...
alexmanu1 said:
You tried in vendor? Might be there...
Click to expand...
Click to collapse
Found it Thanks!
Related
hi :laugh:
yesterday i change a system file in order to increase volume headset.
i would like to back to the default file because when i put the max volume it's not good for the loudspeaker...
Could you give me the default file located in /etc/default_gain.conf. and upload it on the web (dropbox or others)
thank you very much ! :laugh:
sorry you can delete this post because i found the default file in a Cyanogen Rom for N7100.. thank
Are you on LJ3?
MohJee said:
Are you on LJ3?
Click to expand...
Click to collapse
I'm on LJ1 why ?
cuz if you were on LJ3 i would give you my file because I'm on LJ3 as well.
vinc26730 said:
sorry you can delete this post because i found the default file in a Cyanogen Rom for N7100.. thank
Click to expand...
Click to collapse
What location does default_gain.conf have in CM? I can't seem to find it.
TYIA
/CK
I found a post here where you could edit a mixer path file to increase the audio output but the one they had was not the same code or something cause my sound was gone during calls so I could not hear the caller unless I used a headset.
So my question is what values do you edit there to change Headphones & Main speakers?
RaW D Coy said:
I found a post here where you could edit a mixer path file to increase the audio output but the one they had was not the same code or something cause my sound was gone during calls so I could not hear the caller unless I used a headset.
So my question is what values do you edit there to change Headphones & Main speakers?
Click to expand...
Click to collapse
Which version of the N4 do you own? Exynos or Snapdragon? If exynos - you're supposed to edit default_gain.conf file instead of mixer_paths. Here's a post for exynos n4 : http://forum.xda-developers.com/note-4/themes-apps/mod-galaxy-note4-volume-boost-t2930614
quadlt said:
Which version of the N4 do you own? Exynos or Snapdragon? If exynos - you're supposed to edit default_gain.conf file instead of mixer_paths. Here's a post for exynos n4 : http://forum.xda-developers.com/note-4/themes-apps/mod-galaxy-note4-volume-boost-t2930614
Click to expand...
Click to collapse
Snapdragon
RaW D Coy said:
Snapdragon
Click to expand...
Click to collapse
Well then try flashing this if you have a custom recovery : http://forum.xda-developers.com/note-4/themes-apps/sound-boost-mod-t2932022
quadlt said:
Well then try flashing this if you have a custom recovery : http://forum.xda-developers.com/note-4/themes-apps/sound-boost-mod-t2932022
Click to expand...
Click to collapse
I don't have a custom recovery =/ kinda waiting for CWM but they're slow but it looks like it's just a .apk anyways why do u need to flash it?
RaW D Coy said:
I don't have a custom recovery =/ kinda waiting for CWM but they're slow but it looks like it's just a .apk anyways why do u need to flash it?
Click to expand...
Click to collapse
Oh yeah, my bad. just install it
Hi!
Could someone with the A2017U Firmware/Rom go into System -> etc -> mixer_paths.xml -> search for: path name="headphone" -> look below that for a line named: ctl name="HP Out Volume" value="19" -> check what value (19 on my example) you have.
I would appreciate this as I would like to know the value because my device has a value of 19 and the volume is still very low.
20 is the maximum. Use different headphones or do a clean install and re check it. The audio has been increased on A2017G Roms to same as U roms. Its either a problem with your headphones or your software needs a reflash.
Can someone on A2017G Nougat please send me their mixer_paths.xml file uneditted please thank you
rikin93 said:
20 is the maximum. Use different headphones or do a clean install and re check it. The audio has been increased on A2017G Roms to same as U roms. Its either a problem with your headphones or your software needs a reflash.
Can someone on A2017G Nougat please send me their mixer_paths.xml file uneditted please thank you
Click to expand...
Click to collapse
I will send you the file in 3 hours.
Can you explain how I should reflash since my last reflash didn't solve it.
Get the full rom image and install it again it either from recovery or update menu settings. should set the volume to the default ones for Nougat.
rikin93 said:
20 is the maximum. Use different headphones or do a clean install and re check it. The audio has been increased on A2017G Roms to same as U roms. Its either a problem with your headphones or your software needs a reflash.
Can someone on A2017G Nougat please send me their mixer_paths.xml file
Click to expand...
Click to collapse
senny22 said:
rikin93 said:
20 is the maximum. Use different headphones or do a clean install and re check it. The audio has been increased on A2017G Roms to same as U roms. Its either a problem with your headphones or your software needs a reflash.
Can someone on A2017G Nougat please send me their mixer_paths.xml file
Click to expand...
Click to collapse
Thanks and this is unedited yes?
Click to expand...
Click to collapse
rikin93 said:
senny22 said:
Thanks and this is unedited yes?
Click to expand...
Click to collapse
Yup
Click to expand...
Click to collapse
Can we increase the max volume by tweaking the mixer path .XML file ....I did that on Moto e...Just wanted to know if it's the same on g4 plus ...If it is possible can anyone post the steps for that
venkatkrishna_s said:
Can we increase the max volume by tweaking the mixer path .XML file ....I did that on Moto e...Just wanted to know if it's the same on g4 plus ...If it is possible can anyone post the steps for that
Click to expand...
Click to collapse
You can do it like here https://forum.xda-developers.com/g4-play/themes/mod-moto-g4-native-volume-boost-t3566205
strongst said:
You can do it like here https://forum.xda-developers.com/g4-play/themes/mod-moto-g4-native-volume-boost-t3566205
Click to expand...
Click to collapse
Thanks !!!
strongst said:
You can do it like here https://forum.xda-developers.com/g4-play/themes/mod-moto-g4-native-volume-boost-t3566205
Click to expand...
Click to collapse
no sound after doing that and now my phone is not booting up
venkatkrishna_s said:
no sound after doing that and now my phone is not booting up
Click to expand...
Click to collapse
Restore backup and check if you edited the right lines.
venkatkrishna_s said:
no sound after doing that and now my phone is not booting up
Click to expand...
Click to collapse
Did you transfer the Moto G4 Play XML? Don't do that lol.
Just use a root explorer (or adb), and manually edit /etc/mixer_paths.xml. Any values that read "84", change to "92 or 94".
negusp said:
Did you transfer the Moto G4 Play XML? Don't do that lol.
Just use a root explorer (or adb), and manually edit /etc/mixer_paths.xml. Any values that read "84", change to "92 or 94".
Click to expand...
Click to collapse
Thanks it's working now!
Hi all
On most android phones you are able to edit the mixer paths file to make the phone louder but this phone doesnt seem to have that file. Does anyone know how this can be done or where the file is located?
Thanks
Brezzz
I don't know if it helps but have you tried
"mixer_volumes_default.xml" in /etc/audio/hi6402
Or maybe
"maxim_default.xml" in /etc/audio/maxim
?
Or could be in /system/etc... too
Hi
Thats really helpful, thank you. I will have a play around in that folder and see what I can find.
Thanks again
Brezzz
find it?
brezzz said:
Hi
Thats really helpful, thank you. I will have a play around in that folder and see what I can find.
Thanks again
Brezzz
Click to expand...
Click to collapse
so did you find the file to change the audio volume?
I am really interested for this, cause I have really low in call volume, even all is maxed. If someone can find string to modify for a little better in call volume I would be eternaly grateful
This file and mixer_volumes_GRACE_xxxxxxx depending on you variant. If you provide me those files from your device i will try to help you increase the in call volume. I've already bumped up the headphone volume, that's why I'm sure these are the configuration files.
erayrafet said:
This file and mixer_volumes_GRACE_xxxxxxx depending on you variant. If you provide me those files from your device i will try to help you increase the in call volume. I've already bumped up the headphone volume, that's why I'm sure these are the configuration files.
Click to expand...
Click to collapse
Dear erayrafet I really apreciate that offer and you have my thanks. In my folder etc/audio/hi6402 I have many mixer_volume_GRACE, GEMINI... I have L09 variant of P8. Could you specify which file beside mixer_volume _default you need?
Oberon84 said:
Dear erayrafet I really apreciate that offer and you have my thanks. In my folder etc/audio/hi6402 I have many mixer_volume_GRACE, GEMINI... I have L09 variant of P8. Could you specify which file beside mixer_volume _default you need?
Click to expand...
Click to collapse
If your CUST is C432 with build number GRA-L09C432XXX then you need to modify mixer_volumes_GRACE_UL_normal.xml also.
Can anyone could send me zipped folder hi6402 from path in root etc/audio/hi6402. I cant hear alnost nothing when talk to someone over my phone since last update and on tecalote magic arrow v3. I have L09 version of Huawei p8. Please help
Oberon84 said:
Can anyone could send me zipped folder hi6402 from path in root etc/audio/hi6402. I cant hear alnost nothing when talk to someone over my phone since last update and on tecalote magic arrow v3. I have L09 version of Huawei p8. Please help
Click to expand...
Click to collapse
These are modified with earpiece enabled (stereo mode) and with louder headphone volume from GRA-L09C40B402.
erayrafet said:
These are modified with earpiece enabled (stereo mode) and with louder headphone volume from GRA-L09C40B402.
Click to expand...
Click to collapse
I have GRA L09C432 model, don know which lines to modify in mixer_volume_default and in mixer_GRACE_UL... If you could clarify that for me which lines to modify and how much, cause I played with those files and managed tp just screw things up with volume
Oberon84 said:
I have GRA L09C432 model, don know which lines to modify in mixer_volume_default and in mixer_GRACE_UL... If you could clarify that for me which lines to modify and how much, cause I played with those files and managed tp just screw things up with volume
Click to expand...
Click to collapse
I don't know about in call volume. You have to find sections with "call" and increase the values of those strings whose values aren't zero.
erayrafet said:
I don't know about in call volume. You have to find sections with "call" and increase the values of those strings whose values aren't zero.
Click to expand...
Click to collapse
Ok. Thanks a lot for your help. Will try to play a little with those lines. All the best to you erayrafet
Oberon84 said:
Ok. Thanks a lot for your help. Will try to play a little with those lines. All the best to you erayrafet
Click to expand...
Click to collapse
Also the earpiece grill might be dirty, try to do a clean-up.