Dear Seniors.
I am facing great hardship because my phone is stuck at boot logo.
No booting in recovery mode to flash another rom.
I did unlock bootloader of it by using tuliptool with success. After that i flashed custom rom in it. after reboot it is happening that.
Please suggest to recover it.
Did you flash twrp after unlocking? Did you make backup of stock ROM? Perhaps find a version of the factory firmware and flash that.
Dear I have no backup and i flashed TWRP recovery.......
It is to aware you that i did relock bootloader now my phone is working properly. but i am unable to enter recovery mode. !!!
Now my phone is running android 6.0.1 B02
But i am failed to root this rom uptill now due above mentioned problem.
modorate said:
Dear I have no backup and i flashed TWRP recovery.......
It is to aware you that i did relock bootloader now my phone is working properly. but i am unable to enter recovery mode. !!!
Now my phone is running android 6.0.1 B02
But i am failed to root this rom uptill now due above mentioned problem.
Click to expand...
Click to collapse
I found software update notification but when i update an error accruing while update. (This update not compatible with this device"
In easy words......... my recovery.img has been corrupted. I have no idea to get rid of this situation.
I planned to unlock my Mini's bootloader this weekend. After reading this post, I decided to act later until the root cause has been figured out.
bao_gg said:
I planned to unlock my Mini's bootloader this weekend. After reading this post, I decided to act later until the root cause has been figured out.
Click to expand...
Click to collapse
Several people myself included have been able to use tuliptool to successfully unlock and root the device.
mine is hard bricked too. but I think it is worse than the case listed on the op.
if you want to hard bricked these are the steps:
follow the procedure to install the Spanish ROM 6.1, than another android m b12, than finally the android seven......use tulip tool and install twpr fine, root ect. amazing ROM.......buuuuut......I lost my IMEI somewhere in this process, and the original FTM which had a small menu changes to another static one, without the menu.
I needed this menu to open the com port to fix the IMEI. than I had the brilliant idea to re-flash android M via twrp (without modifying the zip file to remove the recovery, something I knew so well from the older axon mini).
results:
-lost twpr because the stock ROM wrote over it,
-cannot boot the OS because I flashed android m but the phone had the aboot 7.
-i now have a brick
I need a genious to sujest something to bring it back to life........sh....t...sh...t.....sh...t
any chances I could inject aboot7 via ADB through my dead recovery which somehow the phone recognises? ADB shell still seems to be working
thanks
Related
Please forgive my stupidity - I'm a longtime Samsung Android user and this Fastboot/adb process is all new to me. Last time I used that was with Original TMOBILE Mototola G1!!
So, this is what I have: I had my device ( ZE551KL ) on LP, Bootloader unlocked with TWRP and rooted. 'Cause I first unlocked the Bootloader with the official ASUS app.
Then I installed the OTA ASUS MM version, but according to everyone, once one install the OTA upgrade, it relocks the Bootloader, correct? How can I test this??
This afternoon I put device in Fastboot mode and did a "fastboot boot twrp-3.0.4.img" and it worked!!!
It boot into TWRP and am busy making a backup now.
My Question: if my bootloader is still locked, how could I boot TWRP?
Can I try and 'Fastboot flash recovery twrp....' and will this work or am I going to brick the device?
Ideas? ( well, rather experienced advice, please)- as I would hate to brick my device.
The TWRP backup I am currently making - is that any good/helpful to anyone that can help us getting this device properly unlocked and rooted?
Thanks
I did try the official ASUS unlock tool on MM....
I forgot to mention that.
I did try the official unlock tool on MM, but the app just failed.
I opened an issue with ASUS regarding this, as their website specify version 1.16 'and later'
Does this mean I am good to flash TWRP??
Am I good to flash TWRP if I get this message??
You are good. I had unlocked the bootloader long time ago, and I have installed MM, they don't relock it back. It would be strange to do that, since once unlocked you lost the warranty... it would be like they will gave you back the warranty!
Dude, your bootloader is unlocked. You're good to go. Fastboot flash that recovery and go to town.
From your description it is clear that you have successfully unlocked your device. Once it is unlocked, you wont be able to lock it back. So there is no way to revert the process and it affects warranty. Now anytime you can flash TWRP with fastboot and install custom ROM. If you want to install Stock rom install stock recovery and use ADB sideload to install Stock ROM. if you have any other doubts visit my youtube channel [TheMobileShots] where i have provided the tutorial to do these things. Have a great day!
Hey people,
I've updated to the unofficial Nougat leak here and ever since I can't get into the recovery. The ROM is OK but no matter what I do I can't get into the recovery. After "adb reboot recovery" I just get stuck in a boot loop and I must get into the upgrade utility and restart phone into the system from there. I've tried to flash few other recovery but nothing works. So far I'm fine with the system and I'd like to also try LineageOS but I have no way to flash the ROM. I have tried "Fastboot flash zip xx.zip" from the bootloader to flash LineageOS but it told me I don't have permissions so it was no good.
So do you folks here have any idea what I did wrong and how to make the recovery work again? I'm kind of learn from the tutorial guy so I'll post the sources I've been using to do the flash.
Unlocking bootloader and flashing new recovery
I've only used the unlock bootloader and flash twrp sections with their provided recovery. I've also tried to flash THIS recovery by Meticulus after the nougat update.
Flashing the ROM + used ROM
Used the old process because upgrade with system utility kept giving me errors.
Model number - VNS-L21
Also if this issue can't be (yet) fixed do you know any way to safely flash ROMs without recovery?
Thanks for any kind of help
You cannot flash any ROM in the nougat recovery, because it does not support /data mounting. Downgrade to MM and install the ROM you want from there.
@SALVO9
Ok, thank you for the reply. I'll probably try to downgrade and flash it afterwards to know which ROM suits me better. All I need to do is find the stock ROM copy it to the phone and restart with all buttons pushed right? Also, do you have any info about when there will be a nougat recovery that can mount /data?
TheAstaros said:
@SALVO9
All I need to do is find the stock ROM copy it to the phone and restart with all buttons pushed right?
Click to expand...
Click to collapse
No.
Flash proper OEMinfo first!
@Schlengge
Thanks for the advice. I did my research because I didn't know a thing about oeminfo and I have hit a wall since my phone is not rooted(Should have mentioned that earlier I know) and I'm supposed to replace custom.bin and then flash the img. So afterwards I searched how to root this nougat ROM and found nothing no app was working and everything I found was just using the phone's recovery which I can't access. Does anything come to mind? I will continue getting through the pages of google but I don't think I'll find anything useful.
EDIT> After some searching I found the official rollback package. I have yet to test it (downloading on slow connection atm) and I hope it will work.
Ok it's finally done and I'm back at old stock ROM(EMUI 4.1.1 VNS-L21C432B160) after hours of searching I gave up on the oeminfo or rooting the phone. I searched for the stock firmware and found some rollback packages on the Huawei site. I will post the links in there you even have instructions packed with the zip.
LINK1
LINK2
Download both start with the smaller one because it's flashing first and follow the instructions in the pdf. Worked for me so hope it also helps you.
Also as I found out just now this rollback also locks back your bootloader so be sure to unlock it back again with the code.
Guys please dont flame me i am having a pannic attack and cant think strait. i rooted and flashed twrp with moto g5 plus tool kit, then later used ex kernel, then got update ota notioce...i knew it wouldnt work but was suprised it downloaded and propt to restart..so i did thinking it would say no you cant.. instead stuck in twrp like there is no os! please help. I dont know how to reflash the stock os, my backup didnt work when i restored it, and besides that after trying to restore i ended up wipin g and formatu=ing data and looso=ing it now anyway. i am shaking help please
I have just tried to flash lineage zip and it said succesful but when rebooting it goes strait back to twrp, have i lost my boot img ? what can i possiblu do, i am concerned if i download the 1.6 gig stock rom file from g5 plus kits "factory rom kit" it wont be the propper rom for my region "australia" or wont even have a modem..what can i do.. god why dont i stillhave any xanax
when trying to flash stock rom with toolkit the log says bootloader slot suffix not found and bad key
So i finally drank enough scotch to calm down, and realized the "errors" were not actually preventing the stock rom from flashing... and i now have not only a working rom but a baseband..so my reccomendation goes out to anyone panicked to just flash the downloaded stock rom found in the links of the moto g5 plus toolkit
Never,take otas with custom recovery , the solution is flash whole rom
djzero86 said:
Never,take otas with custom recovery , the solution is flash whole rom
Click to expand...
Click to collapse
Yes.. I truly thought there would be a "wah wah wah" notice being rooted.. But it went straight in to it. Just didn't know where any stock rocks were and wasn't prepared.. And ended in a hyperventilating mess. At least I now have the files
Every day we learn something new, brick this phone is very difficult, all we need is the correct files and some of magic and come back to life ,?
Cheers..
Excuse my bad english...
djzero86 said:
Every day we learn something new, brick this phone is very difficult, all we need is the correct files and some of magic and come back to life ,?
Cheers..
Excuse my bad english...
Click to expand...
Click to collapse
true! My last phone I felt secure and that it was completely unbrickable all because I had all the necessary rescue files and backups. And I had learned from every previous disaster. Thank you for your kind words friend.
Can't get fastboot to recognize device
So I'm kind of in the same boat as you were. I unlocked the bootlader and rooted the phone before giving it to my wife. During that whole process, fastboot had no problems recognizing the phone (obviously). Then my wife tried to update via the OTA which got her stuck in TWRP. I'd like to reflash the stock ROM, but the problem I have is that TWRP won't just flash the zip file ("invalid zip file format"), and I can't use fastboot to do commands line by line since "fastboot devices" doesn't show my phone anymore. I was able to get her going on a custom ROM for now, but I'd like to put her back on the stock ROM so we won't encounter this problem again. I've reinstalled the Motorola driver several times, but no luck. ADB has no problems recognizing the phone when in TWRP recovery. One thing that happened recently was a big update to Windows 10, but I'm not sure if that is the reason for my fastboot issues.
Any advice would be appreciated.
Just a follow up, I tried uninstalling/reinstalling the Motorola driver and ADB on the original computer, but for some reason it still won't "see" the phone in fastboot. I was able to install ADB/Fastboot and the Motorola driver on a separate computer (also Windows 10) to get fastboot to recognize the phone so I could issue commands to reinstall the stock firmware. I noticed, though, that the following commands FAILED when I entered them:
fastboot erase customize
fastboot erase clogo
I'm not sure what those were for, but the phone seems to be working fine on the stock firmware now.
Hello,
In a late-night act of utter stupidity, when over-tired, I re-flashed the boot recovery with TWRP and bricked my M3. It obviously can't now enter boot recovery.
I've used TWRP and successfully re-flashed custom roms on my original Mate, and changed regions. (Not in any way an expert, I know how to follow instructions.)
I was trying to convert my Chinese (I was living there) ROM to UK. It's tricky nowadays.
This was a stupid error when tired. Any way back?
I read somewhere that people with the right hardware can do it, but finding someone. I'm in Leeds, UK.
The pad does (did) what I need, and I'm not in a position to buy a new one. If it's dead, it's dead; and I can move on.
Cheers in advance for any input.
SOLVED
See my last post on this thread.
After using Multi Tool V8 to enquire into the machine I switched off and rebooted.
It came back with a "Wipe cache" and "Reset to factory settings" Huawei screen, so I did both and - It booted!
It had spectacularly failed to do anything but boot-loop since coming out of a very dead battery yesterday.
1) Boot recovery, OTA recovery, and dload recovery from SD were all unavailable after the original overwriting of the bootloader.
2) After being dead for months, all recovery options booted from power button plus vol- Vol+ and Vol+/- - but still bootlooping.
Then, suddenly it booted into wipe cache/factory reset screen.
Android 7, EMUI 5.1.3
I have no idea why.
Now fully working. (Including restarting)
I fell in a similar situation after having flashed a magisk module .. unfortunately my nandroid backup didn't restore my devices, but I was able to enter in twrp recovery.. so,..
if you can boot in twrp recovery, not all hopes are lost..
first of all, you must download a stock firmware for your device (i suggest to download trough huawei firmware finder: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146/amp/)
You must download a fullota version of stock firmware
then, you can flash this firmware (3 zip files) trough hurupdater via twrp recovery: https://forum.xda-developers.com/ho...lash-official-firmware-recovery-t3769279/amp/
in order to not overwrite twrp recovery, put the twrp.img file in the same folder and rename it to recovery.img
you can find more info in this topic (follow the instructions, in particular those on how to use hurupdater): https://forum.xda-developers.com/me...ting-btv-dl09-to-unapproved-firmware-t3817541
in order to find a firmware suitable to your device, try to find info on it: you have a mediapad m3 European? American? asian? just wifi or also 4G-LTE (whit a sim and phone functions)? lite or normal version? 10 inches or 8.4?
everyone of these devices have different codenames and suitable firmwares
I found exact firmware for my devices with the procedure described here:
https://forum.xda-developers.com/showpost.php?p=77241673&postcount=3
.. but, if you flashed a wrong firmware, i really don't know if it might help you..
anyway, i wish the info above could help you.
qllkevuoi said:
I fell in a similar situation after having flashed a magisk module .. unfortunately my nandroid backup didn't restore my devices, but I was able to enter in twrp recovery.. so,..
if you can boot in twrp recovery, not all hopes are lost..
first of all, you must download a stock firmware for your device (i suggest to download trough huawei firmware finder: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146/amp/)
You must download a fullota version of stock firmware
then, you can flash this firmware (3 zip files) trough hurupdater via twrp recovery: https://forum.xda-developers.com/ho...lash-official-firmware-recovery-t3769279/amp/
in order to not overwrite twrp recovery, put the twrp.img file in the same folder and rename it to recovery.img
you can find more info in this topic (follow the instructions, in particular those on how to use hurupdater): https://forum.xda-developers.com/me...ting-btv-dl09-to-unapproved-firmware-t3817541
in order to find a firmware suitable to your device, try to find info on it: you have a mediapad m3 European? American? asian? just wifi or also 4G-LTE (whit a sim and phone functions)? lite or normal version? 10 inches or 8.4?
everyone of these devices have different codenames and suitable firmwares
I found exact firmware for my devices with the procedure described here:
https://forum.xda-developers.com/showpost.php?p=77241673&postcount=3
.. but, if you flashed a wrong firmware, i really don't know if it might help you..
anyway, i wish the info above could help you.
Click to expand...
Click to collapse
Thanks for the reply, and sorry for the delay. New child has somewhat taken over our lives!
I'll take a look at the tablet again when I have time, probably next month.
Update - Bootloader working after battery drain: Now what?
[Edit] Post redundant as it started working - see OP.
NwotNot said:
Thanks for the reply, and sorry for the delay. New child has somewhat taken over our lives!
I'll take a look at the tablet again when I have time, probably next month.
Click to expand...
Click to collapse
Well...
After being without power for so long I turned the tablet on and it booted!
However, it then went into OTA and updated - rebooted - and locked the damned bootloader.
1) It's showing as rooted.
2) Boot loader is locked.
3) Fastboot & rescue mode comes up.
4) Recovery (OTA) still comes up but "Fails" this time.
I don't recall how I unlocked it last time. I don't ever rememebr an unlock code.
Status:
Fastboot reports it exists.
ADB reports "Null" not found. (ADB drivers installed).
Firmware version: CPN-AL00C233B078
Device name: CPN-AL00
Serial Number: Showing
IMEI: Showing
Bootloader state: LOCK
I have an old TWRP backup - don't know how to use it.
Solutions?
a) Any kind devs prepared to work with me and find the boot unlocker code for this 5-year old tablet?
b) Any other solutions now we know what's what?
I'm self employed without income in this pandemic and can't really afford to buy a new tablet. If I have to, it won't be Huawei.
(There's a T3 10.6" at £89, but I'm not biting - I need to sort out a budget tablet with at least the oomph of the M3.)
Any help much appreciated. :good:
David.
short story i installed a custom rom. Everything was fine but i was forced to go to stock due to a problem. It looks like i flashed the wrong files i flashed system.img,ramdisk,ramdiskrecovery and kernel.img. I extracted these files from a update that had the same model of my phone but for some reason now my phone is bricked. i was flashing stock firmware but now there's no os installed nothing at all, im a total noob with flashing on huawei phones. I thought this was going to work but no.
My bootloader its unlocked. erecovery doesnt work. i can only access the bootloader mode but my device is not detected while using adb commands. stock recovery works but i only have the following options:''download latest version and recovery'', ''reboot'' and ''shutdown''. is there a solution for this?
Editk guys my problem was fixed.
Same problem
Hello. I have the same problem. How did you fix this.