Recently with the delay on 5.0 for the US LTE variant, because of AT&T, I have lost my patience with them. I am looking for a way to rid myself of this BS while maintaining full stock software. I have heard that the variants of the tablet are actually not different, and the firmwares may work on either model. Has anyone tried this? I'm well aware the cell bands supported may change (but my carrier only requires one band, and the WW variant supports one of my carrier's bands). I would love to know if it works, and if I can dirty flash the package to keep my data, since the rom is basically identical.
I flashed OTA posted in general forum for LTE and using it in ATT. Unlocked bootloader, CWM, and root afterwards. I'm not quite sure what you're looking for?
Sent from my SHIELD Tablet using XDA Premium HD app
http://forum.xda-developers.com/showthread.php?t=2945023
shannoncole05 said:
I flashed OTA posted in general forum for LTE and using it in ATT. Unlocked bootloader, CWM, and root afterwards. I'm not quite sure what you're looking for?
Sent from my SHIELD Tablet using XDA Premium HD app
Click to expand...
Click to collapse
Bricks.
No what i'm asking is if i could convert my device to the WW variant with a firmware flash, and thus avoid needing to manually flash OTA files becauze of delays. I know this isn't going to be the last update delayed on the US variant so i'm wondering if i can just switch the installed software from the US LTE version to the WW LTE version, without bricking.
Yeah.. I am thinking the same thing as well.
If it was possible without bricking the device, I would love to flash the "Rest of the World" firmware on the AT&T set too.
xonix240719mu said:
Yeah.. I am thinking the same thing as well.
If it was possible without bricking the device, I would love to flash the "Rest of the World" firmware on the AT&T set too.
Click to expand...
Click to collapse
You're welcome to try it with the factory images. If it does brick, you can always restore through the same process. I plan on attempting it soon, but i am waiting on a microsd card.
Nintonito said:
Recently with the delay on 5.0 for the US LTE variant, because of AT&T, I have lost my patience with them. I am looking for a way to rid myself of this BS while maintaining full stock software. I have heard that the variants of the tablet are actually not different, and the firmwares may work on either model. Has anyone tried this? I'm well aware the cell bands supported may change (but my carrier only requires one band, and the WW variant supports one of my carrier's bands). I would love to know if it works, and if I can dirty flash the package to keep my data, since the rom is basically identical.
Click to expand...
Click to collapse
Theoretically, the only thing that would be changed between builds is the GSM stack. However the OTA between the WW and the US version would not work by default. You'd need to go into the OTA zip and mess around with some of the build.prop info. Which then may cause MD5 mismatches when it is parsed, and would definitely affect subsequent OTA updates because of MD5 mismatches.
If there are Android 5.0 factory images available for the WW ROM you feel would be suitable for your geography, then this would be the safer way to proceed.
I remember when I owned a Samsung Galaxy S2, there was an XDA thread with flashable modems you could push to your device to get better reception in your area. Essentially the differences between the WW and US/CAN versions should only be the GSM stack, and perhaps some carrier-specific bundled app (like the AT&T app for example).
Just a quick update for those who are interested:
Well ... I just did it. Successfully flashed the RoW recovery image on the Shield Tablet LTE set which I purchased from US via Ebay. I'm still in the process of restoring but so far everything seems to be working fine.
Confirmed 2 things during the flashing of recovery image,
Quote:
1) Issues of Cellular/Sim Card on the US LTE set is almost certainly Lollipop firmware related. No problems on FW 4.4.2
2) Problem of Wi-Fi authentication error after sharing files via Super Beam ( Wi-Fi direct ) is also resolved after revert to 4.4.2
I think I will be sticking with 4.4.2 for now with the added bonus of file managers working on Kit Kat.
xonix240719mu said:
Just a quick update for those who are interested:
Well ... I just did it. Successfully flashed the RoW recovery image on the Shield Tablet LTE set which I purchased from US via Ebay. I'm still in the process of restoring but so far everything seems to be working fine.
Confirmed 2 things during the flashing of recovery image,
Quote:
1) Issues of Cellular/Sim Card on the US LTE set is almost certainly Lollipop firmware related. No problems on FW 4.4.2
2) Problem of Wi-Fi authentication error after sharing files via Super Beam ( Wi-Fi direct ) is also resolved after revert to 4.4.2
I think I will be sticking with 4.4.2 for now with the added bonus of file managers working on Kit Kat.
Click to expand...
Click to collapse
Thanks for the update. I am interested in this also.
So i'm assuming from your post you got LTE working? Which country are you in? Where do you get the factory images from?
I live in Australia and have the US LTE version. HSPA+ is good but it would be nice to have LTE working on my network (Telstra).
perky nerky said:
Thanks for the update. I am interested in this also.
So i'm assuming from your post you got LTE working? Which country are you in? Where do you get the factory images from?
I live in Australia and have the US LTE version. HSPA+ is good but it would be nice to have LTE working on my network (Telstra).
Click to expand...
Click to collapse
Actually, I don't have a 4G LTE micro sim card with me so I can't verify that at the moment. I am trying to test it out using my friend's sim card and will report back with the results. In my opinion, it's not a good idea to be trying my nano sim on this.
I'm from Singapore and the network I'm on supports LTE Band 3 & 7 and my AT&T Moto X which supports Band 7 works out of the box.
Got them from Nvidia developers website but you have to register for a free account first.
xonix240719mu said:
Actually, I don't have a 4G LTE micro sim card with me so I can't verify that at the moment. I am trying to test it out using my friend's sim card and will report back with the results. In my opinion, it's not a good idea to be trying my nano sim on this.
I'm from Singapore and the network I'm on supports LTE Band 3 & 7 and my AT&T Moto X which supports Band 7 works out of the box.
Got them from Nvidia developers website but you have to register for a free account first.
Click to expand...
Click to collapse
Yep I need LTE band 3 for my network which is not supported out of the box by my US LTE shield. If your network supports LTE Band 7 then your shield should also be able to access your LTE network as BOTH the US and RoW LTE shields support LTE Band 7.
So I don't think your experiment will help me. Is there any way finding out which LTE Bands your shield supports now that you have flashed the RoW recovery image?
perky nerky said:
Yep I need LTE band 3 for my network which is not supported out of the box by my US LTE shield. If your network supports LTE Band 7 then your shield should also be able to access your LTE network as BOTH the US and RoW LTE shields support LTE Band 7.
So I don't think your experiment will help me. Is there any way finding out which LTE Bands your shield supports now that you have flashed the RoW recovery image?
Click to expand...
Click to collapse
I am not really an expert on such matters but let me try and if it's possible to find out the information you are looking for.
Why not try flashing it and give it a go ? There's the bonus perk of removing the AT&T app from the device.
xonix240719mu said:
I am not really an expert on such matters but let me try and if it's possible to find out the information you are looking for.
Why not try flashing it and give it a go ? There's the bonus perk of removing the AT&T app from the device.
Click to expand...
Click to collapse
Hi, I am currently using US LTE NVIDIA Shield Tablet in Singapore as well. I have successfully flashed the RoW recovery image to my tablet (since I'm downgrading from Lollipop as well, so I thought I might as well try), but I noticed that there is no baseband file in the recovery image package. I proceeded to flash anyway.
One thing I noticed after flashing is that I still am not getting LTE (half of Singapore is band 3, and my home is under its coverage). So, it's pretty safe to say that the baseband is not affected by the factory image.
However, it might also be that the latest recovery image doesn't cover the baseband, and it might be included in the previous updates. So, I'm trying to download the previous recovery images and see whether there are baseband images are there.
EDIT: baseband image is not in there. The baseband version is definitely still for North America (e1729-nala.4.05_0.6.3 @786934, notice the 'na' part?).
inscythe said:
Hi, I am currently using US LTE NVIDIA Shield Tablet in Singapore as well. I have successfully flashed the RoW recovery image to my tablet (since I'm downgrading from Lollipop as well, so I thought I might as well try), but I noticed that there is no baseband file in the recovery image package. I proceeded to flash anyway.
One thing I noticed after flashing is that I still am not getting LTE (half of Singapore is band 3, and my home is under its coverage). So, it's pretty safe to say that the baseband is not affected by the factory image.
However, it might also be that the latest recovery image doesn't cover the baseband, and it might be included in the previous updates. So, I'm trying to download the previous recovery images and see whether there are baseband images are there.
EDIT: baseband image is not in there. The baseband version is definitely still for North America (e1729-nala.4.05_0.6.3 @786934, notice the 'na' part?).
Click to expand...
Click to collapse
Sorry I don't really understand ... the RoW software cover for both Band 3 and 7 since the UK edition supports these LTE bands as specified in Nvidia FAQ.
You should still be able to get Band 7 coverage which the NA edition supports as well, right ?
Am I missing something ?
inscythe said:
Hi, I am currently using US LTE NVIDIA Shield Tablet in Singapore as well. I have successfully flashed the RoW recovery image to my tablet (since I'm downgrading from Lollipop as well, so I thought I might as well try), but I noticed that there is no baseband file in the recovery image package. I proceeded to flash anyway.
One thing I noticed after flashing is that I still am not getting LTE (half of Singapore is band 3, and my home is under its coverage). So, it's pretty safe to say that the baseband is not affected by the factory image.
However, it might also be that the latest recovery image doesn't cover the baseband, and it might be included in the previous updates. So, I'm trying to download the previous recovery images and see whether there are baseband images are there.
EDIT: baseband image is not in there. The baseband version is definitely still for North America (e1729-nala.4.05_0.6.3 @786934, notice the 'na' part?).
Click to expand...
Click to collapse
Thank you. That is exactly the information I was looking for. Unfortunately there is no point flashing the RoW recovery image if you wish to change your baseband (and then use different LTE bands like I want to).
Is there anywhere I can download the RoW baseband images? I remember they were readily available for my nexus 4.
xonix240719mu said:
Sorry I don't really understand ... the RoW software cover for both Band 3 and 7 since the UK edition supports these LTE bands as specified in Nvidia FAQ.
You should still be able to get Band 7 coverage which the NA edition supports as well, right ?
Am I missing something ?
Click to expand...
Click to collapse
As I said, the image doesn't include the baseband image. So, no matter what you flash on the rom side, it won't matter.
Also, about band coverage in Singapore, it's not a full overlap. Some areas are band 3 (south and west), while some band 7 (North and East). I know this from an M1 engineer friend. So, yeah, no LTE band 3 in this factory image here.
But not all hope is lost. If one day Nvidia decides to update baseband, it will then definitely include the baseband in the OTA or factory image. So, possibility of switching is still there.
Was there a baseband update with the latest software update (2.0)?
The factory images for 2.0 have still not been released.
In another strange twist when i turned on my tablet this morning I was surprised to see my US shield had LTE here in Australia. Which means only one thing - Telstra are expanding their LTE spectrum in my area!
perky nerky said:
Was there a baseband update with the latest software update (2.0)?
The factory images for 2.0 have still not been released.
In another strange twist when i turned on my tablet this morning I was surprised to see my US shield had LTE here in Australia. Which means only one thing - Telstra are expanding their LTE spectrum in my area!
Click to expand...
Click to collapse
I downloaded the OTA manually and checked the content. It doesn't have any baseband update. Also, just to confirm again, I actually re-installed Lollipop. The baseband is still unchanged (only the suffix @ part changed, but I think it's just some marker).
I checked wikipedia, and it seems that Telstra has band 3 and 28. There's a good chance that they switched your area's band to 3, or they simply add band 7 (the latter is, of course, ideal).
I read that Nvidia is preparing an update to the existing Lollipop system. Hopefully they will include a baseband update, then we can probably make the jump to the RoW ROM. For now, I'm sticking with the US ROM first.
inscythe said:
As I said, the image doesn't include the baseband image. So, no matter what you flash on the rom side, it won't matter.
Also, about band coverage in Singapore, it's not a full overlap. Some areas are band 3 (south and west), while some band 7 (North and East). I know this from an M1 engineer friend. So, yeah, no LTE band 3 in this factory image here.
But not all hope is lost. If one day Nvidia decides to update baseband, it will then definitely include the baseband in the OTA or factory image. So, possibility of switching is still there.
Click to expand...
Click to collapse
Okay ... I see that you are not able to get Band 3 coverage. But just to confirm, you are still able to get band 7 4G LTE coverage on the ROW Rom right ?
My phone 4G LTE is on Singtel, getting pretty good coverage island wide on Band 7. Unfortunately, it's a nano sim and I'm hesitant to test it on the tablet in case in gets jammed inside the slot.
So long everything works fine, I'm sticking with ROW Rom as it will probably not have none of the nonsense whereby it require AT&T approval before release.
Sorry to trouble you on another matter, I have reported this 2 issues to Nvidia customer support but just want to check if it's just my set or an common problem.
1) Cellular data connectivity will not return after enable aeroplane mode. SIM card is subsequently not detected.
2) After sharing files using Wi-Fi direct ( SuperBeam app ), Wi-Fi connection doesn't auto reconnect due to failed authentication. Require manual intervention.
What I can say is this 2 issues no longer occur once I downgraded the software from Android 5.0 back to Kit Kat 4.4.2
---------- Post added at 01:54 PM ---------- Previous post was at 01:46 PM ----------
perky nerky said:
Was there a baseband update with the latest software update (2.0)?
The factory images for 2.0 have still not been released.
In another strange twist when i turned on my tablet this morning I was surprised to see my US shield had LTE here in Australia. Which means only one thing - Telstra are expanding their LTE spectrum in my area!
Click to expand...
Click to collapse
According to Nvidia faq, the North American version that works on AT&T, T-Mobile and Rogers on LTE bands 2, 4, 5, 7, and 17 and HSPA bands 1, 2, 4, 5.
I see that this article ( http://www.cnet.com/au/news/telstra-expands-its-4g-services-including-the-700mhz-band-trials/ ) states that Telstra is conducting trials for 700mhz (Band 17) in your area. Maybe this is why you have begun receiving 4G LTE reception in your area ?
xonix240719mu said:
According to Nvidia faq, the North American version that works on AT&T, T-Mobile and Rogers on LTE bands 2, 4, 5, 7, and 17 and HSPA bands 1, 2, 4, 5.
I see that this article states that Telstra is conducting trials for 700mhz (Band 17) in your area. This is probably why you have begun receiving 4G LTE reception.
http://www.cnet.com/au/news/telstra-expands-its-4g-services-including-the-700mhz-band-trials/
Click to expand...
Click to collapse
I initially thought it may have been the planned 700mHz expansion by Telstra in my area HOWEVER Telstra's 700mHz expansion is actually Band 28 (not Band 17) and my US shield does not work on Band 28 out of the box. Although LTE Band 17 and 28 both use the 700mHz spectrum they both use different parts of that spectrum so are not compatible.
What I think has happened is there is some LTE Band 7 coverage in the middle of town here which is where I was when I got LTE coverage today. As I understand it Telstra has some limited LTE Band 7 coverage with most of the LTE network being Band 3........ so I'll still have to wait until I can flash a RoW baseband which will hopefully give me Band 3.....
Hey guys -
So like many of you, I reflashed my two Yotas to the latest RU Lollipop and was wondering if there was another radio firmware file that might wake up the AT&T US LTE bands. Any thoughts? Has anyone tried flashing the different radios to see if you can get a 4G LTE signal stateside?
Thanks,
Rootdude
what upload/download speed do you have now?
YotaDevicesRussia said:
what upload/download speed do you have now?
Click to expand...
Click to collapse
I have HSPA+ on AT&T . Can you help us with US modem firmware for LTE?
ivanupolo said:
I have HSPA+ on AT&T . Can you help us with US modem firmware for LTE?
Click to expand...
Click to collapse
HSPA+ can be sometimes very good - 3-15Mb/s - what is your speed at the moment? can you check through speedtest.net ?
At&t firmware
I have around 3.5 mbs to download and 0.6 uploaf. Too small comparing local 4G. So, can you help us?
I do not think you can change that easily, there's a thread talking about changing Radio Bands but the conclusion I got from the reading is that it does not work, at least with current "user" knowledge, YD206 is from China or HongKong, and some of those LTE Bands can work in Europe, not so much on the USA, the bands that USA telephone companies are very different than Europe or Asia, and as such YD206 IS NOT compatible with USA LTE bands. UMTS can have much higher upload speed than the ones you posted, so it might be your network problem, don't know if they are any better in LTE over your region.
Should be possible
Qualcomm 8974 supports all LTE bands. We just need proper modem firmware for US bands. Method in those threads definitely doesn't work since Qualcomm introduced some hidden filters inside firmware
BTW, there is lte_prefferedband file in the modem folder of Yota EFS. Does anyone know how to edit it?
That might be a anti-tampered code against our NV changes
Ok, I found out. For AT&T we need qcn file from Yotaphone 2, model 205. I don't know it such thing exist on the market but this reference says that it might be compatible with At&T.
https://www.frequencycheck.com/models/A1JaO/yota-yotaphone-2-yd205
ivanupolo said:
Ok, I found out. For AT&T we need qcn file from Yotaphone 2, model 205. I don't know it such thing exist on the market but this reference says that it might be compatible with At&T.
https://www.frequencycheck.com/models/A1JaO/yota-yotaphone-2-yd205
Click to expand...
Click to collapse
interesting thing is that YD205 model was never launched, so it doesn't exist at all, unfortunately. The inquiries about future developments of this model were negative...
Here I discovered a new firmware for N5120:
https://samsung-firmware.org/download/GT-N5120/wo45/NEE/N5120XXSDQC1/N5120OXXDNE1/
Phone Samsung GT-N5120
Model GT-N5120
PDA Version N5120XXSDQC1
CSC Version N5120OXXDNE1
PHONE Version N5120XXDNE4
Region NEE
Country Nordic countries
Build Date 30.03.2017
Changelist 1600517
OS KitKat
OS Version 4.4.2
Updated OTA:
new kernel and new security patch:
I am tired of dealing with SGH-I467's (AT&T only) locked bootloader. It makes installing custom ROM impossible. Now I'm thinking of buying and swapping in a mainboard from SGH-I467M (the Canadian version is bootloader UNLOCKED) or GT-N5120 (international version).
1. will this give me an unlocked bootloader without any other hardware change? I know I probably have to swap in a new modem code, but with an unlocked bootloader, any software change is possible
2. will the mainboard from GT-N5120 work in a SGH-I467? I know SGH-I467M's mainboard will for sure work in SGH-I467 because the only difference is the latter has a locked bootloader. Unfortunately, SGH-I467M's mainboard is hard to come by, but GT-N5120's is still available. Although the LTE bands in N5120 are overseas and SGH-I467 has AT&T bands, are they really different hardware, or same hardware with different software?
[Updated Feb 9th, 2018] Now I don't think it is doable at all to download SGH-I467 or SGH-I467M's modem code to a GT-N5120 hardware even if the bootloader is unlocked. I have a Canadian Galaxy S4, SGH-I337M (bootloader unlocked, unlike the AT&T version). Since my carrier is U.S. T-Mobile, I tried to download T-Mobile's modem to my S4 thinking it may give me better data rate. Odin prompted Fail! (Auth) and S4 showed Secure Check Fail! After some googling, I realize regardless of unlocked bootloader, these phones/tablets are engineered to check if authorized modem codes are being flashed. I know for sure my S4's bootloader is unlocked because I have installed TWRP for recovery.
Since GT-N5120 has international frequency bands, turning it into a North American tablet is DOA if another carrier's modem code cannot be installed. If anyone questions why a custom ROM can be flashed to a phone/tablet with unlocked bootloader, it is because a custom ROM seldom comes with the modem code!
luckysoul777 said:
I am tired of dealing with SGH-I467's (AT&T only) locked bootloader. It makes installing custom ROM impossible. Now I'm thinking of buying and swapping in a mainboard from SGH-I467M (the Canadian version is bootloader UNLOCKED) or GT-N5120 (international version).
1. will this give me an unlocked bootloader without any other hardware change? I know I probably have to swap in a new modem code, but with an unlocked bootloader, any software change is possible
2. will the mainboard from GT-N5120 work in a SGH-I467? I know SGH-I467M's mainboard will for sure work in SGH-I467 because the only difference is the latter has a locked bootloader. Unfortunately, SGH-I467M's mainboard is hard to come by, but GT-N5120's is still available. Although the LTE bands in N5120 are overseas and SGH-I467 has AT&T bands, are they really different hardware, or same hardware with different software?
Any comment is highly appreciated. Thanks
Click to expand...
Click to collapse
That firmware is almost year old now..
I have no issues with my at&t i467, it runs and does everything my modded Note 8.0 does. Except a lack of custom recovery, and kernel. All you need is to learn a bit on simple file managment and permissions, while plugging away with dropping in system files and libs. I guess I will be the only one here with a modded out yank i467 that works on EU wifi channels.
I had a few threads on libs and apps, along with settings config files to customise on your own. But everybody acts like it's complex trig. Heck i hardly knew much about android when I bought my tablets, and in a years time peeps think i am a god. WTFF!
gooberdude said:
All you need is to learn a bit on simple file managment and permissions, while plugging away with dropping in system files and libs.
Click to expand...
Click to collapse
Great idea! Thank you. Says who one has to do all mods during the Odin time and get rejected by this locked bootloader? I will definitely look up your threads on how to swap out these files post boot.
gooberdude said:
I had a few threads on libs and apps, along with settings config files to customise on your own.
Click to expand...
Click to collapse
I tried to look up these posts, but you have a lot of them! If you don't mind, can you suggest the key words needed to filter them out? Thank you
So i ordered oneplus 6t off ebay fairly cheap it was us version is it compatible in uk and also will the roms work on the us version as good as the global version
ninjatall12 said:
So i ordered oneplus 6t off ebay fairly cheap it was us version is it compatible in uk and also will the roms work on the us version as good as the global version
Click to expand...
Click to collapse
You should be fine for the most part. The only difference will be the network band support. You can flash the International ROM. As long as it's not a locked T-Mobile variant.
You'll need to check your network bands of your network provider and the compatibility of the model A6010.
Conversion is easy if need be.
Battlehero said:
You should be fine for the most part. The only difference will be the network band support. You can flash the International ROM. As long as it's not a locked T-Mobile variant.
You'll need to check your network bands of your network provider and the compatibility of the model A6010.
Click to expand...
Click to collapse
whats the difference between the roms
Deleted...
Battlehero said:
You should be fine for the most part. The only difference will be the network band support. You can flash the International ROM. As long as it's not a locked T-Mobile variant.
You'll need to check your network bands of your network provider and the compatibility of the model A6010.
Click to expand...
Click to collapse
Link for forum flashing global rom