EUI Version: 5.9.026S
Status: stable version
Size: 1.73GB
Release Date: 2017-05-27
Languages Supported: English + German
Download: Click here
EUI Version: 5.9.023S
Status: stable version
Size: 1.71GB
Release Date: 2017-04-12
Languages Supported: English + German
Download: Click here
EUI Version: 5.9.021S
Status: stable version
Size: 1.89GB
Release Date: 25-02-2017
Languages Supported: English + German
Download: Click here
EUI Version: 5.9.20S
Status: stable version
Size: 1.85GB
Release Date: -
Languages Supported: English + German
Download: Click here
OLDER VERSION
EUI Version: 5.8.018S
Status: stable version
Size: 1.73GB
Release Date: 2016-10-11
Languages Supported: English + German
Download: Click here
OLDER VERSION
EUI Version: 5.8.017S
Status: stable version
Size: 1.69GB
Release Date: 2016-08-11
Languages Supported: English + German
Download: Click here
Support frensh language ?
Sent from my Le X522 using XDA-Developers Legacy app
I can install this rom with TWRP?
This China Firmware
Sent from my X527 using XDA Labs
fmehdi said:
Support frensh language ?
Sent from my Le X522 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Clean flash + Chines TWRP
How to install?
Please explain how ro install these ROMS.
Can they only be installed with the stock Recovery via upate.zip (rename to update.zip and install via stock file manager)?
Can they be installed with TWRP?
puetzfu said:
Please explain how ro install these ROMS.
Can they only be installed with the stock Recovery via upate.zip (rename to update.zip and install via stock file manager)?
Can they be installed with TWRP?
Click to expand...
Click to collapse
If you are on 19/23S than use STOCK UPDATER APP
if on custom recovery than use TWRP
Thank you for this. I have been searching for stock firmware of 26s version for long time
del
hellomachineworld said:
Will my bootloader lock again and my twrp be gone after flashing the stock rom? Thx.
Click to expand...
Click to collapse
- No for CUSTOM RECOVERY
TO LOCK
Make sure you have drivers for your phone and adb and fastboot installed.
Open command prompt in windows and run the following command to reboot into bootloader:
adb reboot bootloader
Now once phone is in bootloader (fastboot) screen run the command in command prompt:
fastboot oem lock
On your phone press the +Volume key
Click to expand...
Click to collapse
nuraH6 said:
Thank you for this. I have been searching for stock firmware of 26s version for long time
Click to expand...
Click to collapse
Regards
Only 1 issue you will face will be the CHINES APP, just ROOT>>Uninstall The Apps>>UNROOT
Or for GOOGLE STORE..... DOWNLOAD it from the STOCK CHINEES STORE APP.... Install than REMOVE the Chines Store.
Can i install 5.9.026S on LE S3 X522 ? its currently at 5.8.020S
How do i get google play?
Is the battery good on this version? any bugs known?
Thanks!
EDIT : i have tried to download the file but its downloading at 30 kb/s
Is there another server to download from?
Leeco Le x522 said:
Regards
Only 1 issue you will face will be the CHINES APP, just ROOT>>Uninstall The Apps>>UNROOT
Or for GOOGLE STORE..... DOWNLOAD it from the STOCK CHINEES STORE APP.... Install than REMOVE the Chines Store.
Click to expand...
Click to collapse
is there a way to root without need to flash TWRP?
Will this rom be installed by twrp
Can this be installed for le x526 using updater app and is this rom stable
PandaXD said:
Can i install 5.9.026S on LE S3 X522 ? its currently at 5.8.020S
How do i get google play?
Is the battery good on this version? any bugs known?
Thanks!
EDIT : i have tried to download the file but its downloading at 30 kb/s
Is there another server to download from?
Click to expand...
Click to collapse
Sorry for now, i dont have mirrors.
nuraH6 said:
is there a way to root without need to flash TWRP?
Click to expand...
Click to collapse
Try KINGOROOT from playstore
Jay7383 said:
Will this rom be installed by twrp
Click to expand...
Click to collapse
Yes i personally installed it using TWRP it was working fine.
ashishdhiman said:
Can this be installed for le x526 using updater app and is this rom stable
Click to expand...
Click to collapse
As its official not custom
Change the downloaded file name to update. Zip than use upader app.
My phone don't have updater app. i've try factory reset still don't have the updater app.
Kindly inform me to find the updater app.
Related
~FIRMWARE COLLECTION~
Hi guys! I am proud to present you this collection of official flashable firmware (Using TWRP or whatever) made by me
Warning : This comports risks. XDA or myself can not be held responsible for any problems encountered.
Thank you to read the thread in its entirety before start !!
Changelog
18/03/16 Thread Opening
Click to expand...
Click to collapse
19/03/16 First zip added ! E6833 fw.163
Click to expand...
Click to collapse
20/03/16 Marshmallow for E6853 Available !
Click to expand...
Click to collapse
Installation instructions :
- Root access | Guide here
- Get a recovery (use the guide above)
- Make sure you have a backup
- Download the desired fw.zip (make sure you choose E6853 if you have E6853, but E6833 - E6883 are the same)
- Copy it to your SDCard
- Reboot your phone into recovery
- Install > select your fw.zip then flash it !
- Optionnal, wipe cache / dalvik cache
- Reboot
- Enjoy !
E6853
> Lollipop
Soon uploaded
> Marshmallow
32.1.A.1.163
E6883
> Lollipop
Soon uploaded
> Marshmallow
Soon uploaded
E6833
> Lollipop
Soon uploaded
> Marshmallow
32.1.A.1.163
All the .zip are made with love from .ftf downloaded with XperiFirm
Wink to UserX10 for is smart tuto here and Fragmentation for his guide
XDA:DevDB Information
Bundle of official firmwares for Z5 Premium, ROM for the Sony Xperia Z5 Premium
Contributors
Neil_Armstrong_, UserX10, Fragmentation
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Root | Recovey
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-03-18
Created 2016-03-18
Last Updated 2016-03-20
Reserved
reserved {we never know ehe}
Will definitely save me some time, thank you!
Patiently waiting on the uploads
Also, is there any difference between flashing your zip compared to updating through flashtool?
That's why I'm doin' it, time saver !
Hmpf, 7 hours to upload a zip, and I uploaded first an E6833, I should start with xx53, nevermind.
The first zip's I'll upload will only be composed to system.sin file, compared to Flashtool who flash a whole firmware (fota-kernel, userdata, OEM etc. Ok you can choose to exclude some files xD)
Until userdata is not included it means you do not have to wipe anything before flashing, well I guess
My futur challenge is to propose a pre-rooted firmware (automaticly flash SuperSu ^^)
Neil_Armstrong_ said:
My futur challenge is to propose a pre-rooted firmware (automaticly flash SuperSu ^^)
Click to expand...
Click to collapse
That's nice
what is the difference with Xperia Z5 Premium_E6853_32.1.A.1.163_Italy_Generic?
Infraaa said:
what is the difference with Xperia Z5 Premium_E6853_32.1.A.1.163_Italy_Generic?
Click to expand...
Click to collapse
Différence with what ?
Xperia Z5 Premium_E6853_32.1.A.1.163_*CountryX*_Generic ?
The location of the release, maybe some apps, I dunno :3
Neil_Armstrong_ said:
Différence with what ?
Xperia Z5 Premium_E6853_32.1.A.1.163_*CountryX*_Generic ?
The location of the release, maybe some apps, I dunno :3
Click to expand...
Click to collapse
oh i mean, for install this firmware i need root access but in another guides i dont need it, why??
Infraaa said:
oh i mean, for install this firmware i need root access but in another guides i dont need it, why??
Click to expand...
Click to collapse
It's a faster way to run the desired firmware, you flash it through a recovery (who says recovery says root access)
Hello, on my E6883 when I try to flash the 6833 fw.zip, it says "E:Could not find 'META-INF/com/google/android/update-binary' in the zip file." Thus bringing and error to flashing the zip. What could be the problem? I redownloaded it to see if maybe the zip was corrupt but when flashing it again it brought up the same problem. Thanks for the help in advance!
Abc
Sent from my E6853 using XDA-Developers mobile app
houboy said:
Hello, on my E6883 when I try to flash the 6833 fw.zip, it says "E:Could not find 'META-INF/com/google/android/update-binary' in the zip file." Thus bringing and error to flashing the zip. What could be the problem? I redownloaded it to see if maybe the zip was corrupt but when flashing it again it brought up the same problem. Thanks for the help in advance!
Click to expand...
Click to collapse
Sorry ! I failed like a c*nt those zips are not good
Meizu pro 5 stock
Changelog:
+ Base meizu rom
+ original
+ No lost bootloader
+ support update no wipe data
+ support kernel with synapse tks to dev Russia
How to install
Step1: boot TWRP
Step2: 4wipe if you downgrade rom fw
Step3: install rom
Step4: reboot
Step5: If want root pls flash super SU and kernel mod
Note: IF use kernel pls, click setting/power management settings / power mode
Battery will very good
Link download all (TWRP,super su, rom,kernel)
Google driver
XDA:DevDB Information
Meizu pro 5 Stock original, ROM for the Meizu MX
Contributors
29y6145
ROM OS Version: Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 5.1.1
Version Information
Status: Beta
Stable Release Date: 2016-04-01
Beta Release Date: 2016-04-01
Created 2016-03-31
Last Updated 2016-03-31
Hello dear!
Please show respect to another people efforts and specify the authors of TWRP port for PRO5 and Ultimate Kernel for PRO5 you have used here.
PS: I'm the author of TWRP port. It's almost working except some issues with decon framebuffer weirdness (you will notice some screen ui blinking and lags).
Original link to look for further updates: http://xep.8800.org/pro5/
PPS: Be aware of LOCKED BOOTLOADER if you flashing stock rom with this recovery! Replace original bootloader file first with unlocked one inside update.zip or remove bootloader flashing line from updater-script! If something goes wrong in this case there is a chance to get locked bl and non-functional recovery!
faust93 said:
Hello dear!
Please show respect to another people efforts and specify the authors of TWRP port for PRO5 and Ultimate Kernel for PRO5 you have used here.
PS: I'm the author of TWRP port. It's almost working except some issues with decon framebuffer weirdness (you will notice some screen ui blinking and lags).
Original link to look for further updates: http://xep.8800.org/pro5/
PPS: Be aware of LOCKED BOOTLOADER if you flashing stock rom with this recovery! Replace original bootloader file first with unlocked one inside update.zip or remove bootloader flashing line from updater-script! If something goes wrong in this case there is a chance to get locked bl and non-functional recovery!
Click to expand...
Click to collapse
can you see #1 I write:+ support kernel with synapse tks to dev Russia
I did not create thread instruction recovery twrp , my topic only support rom
tks
First of all, thank you for your great work on the modification of this phone.
But I have a few questions about this rom:
1. Does it support fingerprint technology?
2. Is there any serious bug or loophole in this stock rom?
aegoyu said:
First of all, thank you for your great work on the modification of this phone.
But I have a few questions about this rom:
1. Does it support fingerprint technology?
2. Is there any serious bug or loophole in this stock rom?
Click to expand...
Click to collapse
fingerprint working fine
no bug , rom stable
29y6145 said:
Meizu pro 5 stock
Changelog:
+ Base meizu rom
+ original
+ No lost bootloader
+ support update no wipe data
+ support kernel with synapse tks to dev Russia
How to install
Step1: boot TWRP
Step2: 4wipe if you downgrade rom fw
Step3: install rom
Step4: reboot
Step5: If want root pls flash super SU and kernel mod
Note: IF use kernel pls, click setting/power management settings / power mode
Battery will very good
Link download all (TWRP,super su, rom,kernel)
Google driver
XDA:DevDB Information
Meizu pro 5 Stock original, ROM for the Meizu MX
Contributors
29y6145
ROM OS Version: Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 5.1.1
Version Information
Status: Beta
Stable Release Date: 2016-04-01
Beta Release Date: 2016-04-01
Created 2016-03-31
Last Updated 2016-03-31
Click to expand...
Click to collapse
I flash 5.6.4.5G.zip which you provide,and install your kernel,but serial number show me is ' unknown'
It happend to my own kernel build too,I don't know what's wrong.
Thanks~
zhouruixi said:
I flash 5.6.4.5G.zip which you provide,and install your kernel,but serial number show me is ' unknown'
It happend to my own kernel build too,I don't know what's wrong.
Thanks~
Click to expand...
Click to collapse
you flash rom 5.6.4.5G fix SN unknown
29y6145 said:
you flash rom 5.6.4.5G fix SN unknown
Click to expand...
Click to collapse
You mean I should flash 5.6.4.5G without your kernel?
Yes,I flash the kernel back and the SN is OK
I just want to know why how this problem occured
zhouruixi said:
You mean I should flash 5.6.4.5G without your kernel?
Yes,I flash the kernel back and the SN is OK
I just want to know why how this problem occured
Click to expand...
Click to collapse
because delete imei.dat
Gửi từ PRO 5 của tôi bằng cách sử dụng Tapatalk
Hello everybody !
I just have bought Meizu PRO 5 and I would like to know :
How to unlock bootloader ? (I would like to install CM12.1)
And how to go back at stock ROM ?
What is the difference between your 5.6.4.5G.zip and the original STOCK update ?
Thank you in advance
This ROM is based on Nightly version AICP but its Stable for daily use.
FEATURES:
All AICP features
Lollipop features (customized by AICP)
BUGS:
Unresized BootAnimation [on the center] (I did this on purpose, if you want you can change.)
Sees there is a sim card in tablet but there isn't. [Says "NO SERVICE"] (You can disable with " Permanent GSM solution down below)
Little bugs [does not affects daily use]
Can't install GAAPS because system partition is small (FIXED IN VERSION 2 ! - FIXED IN V2 !)
_-----------------------------------------------_
Permanent GSM solution:
1) not avaliable instructions
2) when way to disable cellular its entered ti here
INSTALLATION:
1. Install TWRP Recovery [if you haven't]
2. Boot into recovery mode
3. Wipe "System,Data,Cache,Dalvik Cache"
4. Flash ROM file from install zip section
Note: If you will flash GAAPS don't reboot after flashing system, flash GAAPS before rebooting.
Note2: Download v2 if you need flashing GAAPS.
XDA:DevDB Information
AICP SM-T800, ROM for the Samsung Galaxy Tab S
Contributors
romngenie
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: TWRP
Based On: AICP
Version Information
Status: Stable
Created 2016-06-25
Last Updated 2016-06-25
hello, after searching I've found out that AICP stand for Android Ice Cold Project. May I ask if it look like Cyanogenmod or the AOSP ? first time I hear about it...
and just to know, why isn't it on the list of : http://dwnld.aicp-rom.com/?device=all&type=all ? for the chagallwifi T-800 ?
zigonneux said:
hello, after searching I've found out that AICP stand for Android Ice Cold Project. May I ask if it look like Cyanogenmod or the AOSP ? first time I hear about it...
and just to know, why isn't it on the list of : http://dwnld.aicp-rom.com/?device=all&type=all ? for the chagallwifi T-800 ?
Click to expand...
Click to collapse
Because i just created a XDA project. I cant contacted to AICP
Sent from my Asus ZenFone 2 Laser (ZE550KL) using XDA Labs
nice rom but some errors: can't check for update. Can't install any gapps because lack of space in the system file. Very fast rom , but can't test anything else.
zigonneux said:
nice rom but some errors: can't check for update. Can't install any gapps because lack of space in the system file. Very fast rom , but can't test anything else.
Click to expand...
Click to collapse
System partition is 300-450 MB i dont know why you can't install GAAPS (Fixed in V2 of ROM)
Can't check for update because its unofficial and no more updated . (except bug fixes)
Thanks for installing.
zigonneux said:
nice rom but some errors: can't check for update. Can't install any gapps because lack of space in the system file. Very fast rom , but can't test anything else.
Click to expand...
Click to collapse
YOU CAN INSTALL GAAPS LIKE THIS: (GAAPS FIXED IN V2 - TRY V2 WITHOUT ANY "occupation")
1. Download and install V2 of the ROM.
2. Install Gaaps.zip (install pico)
download says: Uploaded: 2016-Jul-19 , so I guess that the Fixed file is not there yet. I'll wait for the Fix and test for the fun of it... post the link when the fixed file is ready. I'm too lazy to deal with the Solution : decompress and recompress etc.
zigonneux said:
download says: Uploaded: 2016-Jul-19 , so I guess that the Fixed file is not there yet. I'll wait for the Fix and test for the fun of it... post the link when the fixed file is ready. I'm too lazy to deal with the Solution : decompress and recompress etc.
Click to expand...
Click to collapse
GAAPS is fixed in V2 version.
http://forum.xda-developers.com/devdb/project/dl/?id=19411
there is V2 Link.
You dont need uncompress and other techniques for this. Just download V2 and your GAAPS will fixed.
And i know i dont update this ROM except bug fixes.
SM-T800 cihazımdan Tapatalk kullanılarak gönderildi
Hi people,
if some one looking for links to download incremental updates from PC
incremental updates - Smaller file size ~<500MB
recovery flashable or Fastboot flashable - Huge size >1GB
Update 11.APR.2018
UPDATE version : V9.5.4.0
BASE version : V9.2.1.0
LINK : Download (~630MB)
OLD
Update 02.FEB.2018
UPDATE version : V9.2.1.0
BASE version : V9.0.3.0
LINK : Download (~254MB)
UPDATE version : V9.0.3.0
BASE version : V9.0.1.0
LINK : Download (~301MB)
Updated with links for miui 9.2.1.0 OTA
Came via OTA yesterday. New organizer - last screen on left, very useful.
Someone please tell me how to update via ota using TWRP or how to reinstall stock miui recovery to update OTA ?
I tried to update this file via twrp but I can't
Sent from my MI MAX 2 using Tapatalk
LP.DUKU said:
Someone please tell me how to update via ota using TWRP or how to reinstall stock miui recovery to update OTA ?
I tried to update this file via twrp but I can't
Click to expand...
Click to collapse
If u have not modified ur system partition then just flash stock boot.img (rooting modifies boot.img) comment out the updater-script as shown in attachment. (Quite complicated )
My Method
Easy method
Flash a recovery flashable base rom (I've miui 9.0.1.0) in TWRP. this does not require updater-script edit
Then flash OTA updates with modified updater script
Refer attachment for the lines to be commented
bigota.d.miui.com/V9.2.2.0.NDDCNEK/miui_MIMAX2_V9.2.2.0.NDDCNEK_0b90cf6084_7.1.zip
China Stable Rom is latest MIUI 9 rom V9.2.2.0.NDDCNEK.
I found it in MIUI server.
My phone isn't installed with it yet. Still waiting V9.2.2.0.NDDMIEK.
Change log Follow this link...
imgur.com/a/dRwpN
I have problems with Google play store, always saye has stop, and some apps too, what should I do?
Try to update manually to last version.
https://www.apkmirror.com/apk/googl...9-23-all-0-pr-184601330-android-apk-download/
Updated with links for miui 9.5.4.0 OTA
reversegear said:
Updated with links for miui 9.5.4.0 OTA
Click to expand...
Click to collapse
official update?
I cant find this in the Official download page
emcuevas said:
official update?
I cant find this in the Official download page
Click to expand...
Click to collapse
Yeah.
Official download page is awaiting updation.
It's possible to go back from 9.5.4.0 to the older version from Feb?
d30DK said:
It's possible to go back from 9.5.4.0 to the older version from Feb?
Click to expand...
Click to collapse
possible if you are having TWRP recovery.
Edit: still possible with stock recovery using fastboot rom. but you will loose all your data
reversegear - Ok, thanks! Good to know that.
Some information you should know..
This is a full Stock ROM with android version 8.0
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
You are not allowed to use this base, if you want to make rom, "DIY"
Any sort of File Kanging will be reported without hesitation, we know our codes.
If you like this rom and appreciate my efforts, Hit the Thanks button, and consider a donation
This is the first Oreo Custom ROM for this device.
RULES OF POSTING : READ everything before commenting, And especially the install steps, the rom has been tested throughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
Android 8.0
Deodexed
Heavily debloated
Zipaligned
Very Optimised
Battery and performance better than stock
Full Samsung experience 9.0 without missing vital apps
And many more
Extra Features :-
All the original features are present (Wifi,Bluetooth etc)
Many prop and feature tweaks
DE-Knoxed and disabled Additoinal samsung root preventions and secuirty spams
Official status in settings
Many prop tweaks
Many feature tweaks
Check the changelogs for the FULL feature set
Kernel :-
OxygenKernel V1
- Basic Kernel to Boot Oreo on exy7570
- Support for deodexed Oreo systems
- Samsung Security Disabled
- Disabled more knox and logging
- Knox 0X0
- Bootstate Green for safteynet
- Patched some props for safteynet
- Init.D Support
- Other minor improvments
and many more goodies
ensure you have LATEST TWRP
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash the recovery.img from downloads section
Reboot to recovery
Flash the ROM.ZIP
Flash Magisk
Reboot system
@asysh
@BlackMesa123 for RMM switch
@samsung
@topjohnwu for for magisk
Testers :
ME
Downloads. Changelogs , F.A.Qs below
XDAevDB Information
Extreme, ROM for the Samsung Galaxy J3
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Latest bootloader and modem
Based On: TouchWiz
Version Information
Status: Testing
Current Stable Version: V1
Stable Release Date: 05.06.2019
Created 05.06.2019
Last Updated 05.06.2019
DOWNLOADS
DOWNLOADS:
Extreme ROM V1 Based on Stock ROM [LATEST]
J330F:https://mega.nz/#!jHhViSjA!pR3IQrguIVwA9JBb3UiXEsR1brfpAORmU26Ue272KUo
J330FN:https://mega.nz/#!LLIX2SSK!8iXjkjJiqahydPO40kLAugdPJpX_pdiDmoFp1nsLpM8
recovery.img:https://mega.nz/#!neRhVS4B!UH_4VeBm_OMyjPTKRQKvRtwODiz7n8MTBXprQrXpni8
reserved2
reserved2
reserved3
reserved3
I will try it when I get home
I do not understand. Yesterday I downloaded V2 version. Today, there are no versions of V2. What's the last one?
regards,
zlihtar
zlihtar2 said:
I do not understand. Yesterday I downloaded V2 version. Today, there are no versions of V2. What's the last one?
regards,
zlihtar
Click to expand...
Click to collapse
Did you get it to boot?
Because I can't
zlihtar2 said:
I do not understand. Yesterday I downloaded V2 version. Today, there are no versions of V2. What's the last one?
regards,
zlihtar
Click to expand...
Click to collapse
This would be the V3 but I remade it from scratch and I put V1.This is the latest one.
Benfatica said:
Did you get it to boot?
Because I can't
Click to expand...
Click to collapse
Did yo u install the modded recovery? And why arent u responding on Tele?
victorAndrie said:
Did yo u install the modded recovery? And why arent u responding on Tele?
Click to expand...
Click to collapse
I had to reset my phone and I forgot to install Tele
Benfatica said:
I had to reset my phone and I forgot to install Tele
Click to expand...
Click to collapse
Ok
victorAndrie said:
Ok
Click to expand...
Click to collapse
I will install it when I get home
---------- Post added at 08:39 AM ---------- Previous post was at 08:08 AM ----------
victorAndrie said:
Ok
Click to expand...
Click to collapse
I just tried it but got a black screen again
Has anyone tried yet? Benfatica, what is your version J330F or J330FN?
Thanks,
regards
zlihtar2 said:
Has anyone tried yet? Benfatica, what is your version J330F or J330FN?
Thanks,
regards
Click to expand...
Click to collapse
it's the FN version
hello , after instalation my phone don't boot
Edit : the bootlogo don't boot
ExtremeGrief said:
Did yo u install the modded recovery? And why arent u responding on Tele?
Click to expand...
Click to collapse
same cant boot just black screen
how to instal moded twrp ? I used normal twrp
I tried install moded recovery with adb but phone wont boot up into recovery mode
All the links are dead
Hello developer! Please help fix link download rom.
nil2009 said:
Hello developer! Please help fix link download rom.
Click to expand...
Click to collapse
This rom has been abandoned. The chances of the download link being fixed are very low.
Will there be a version for j327p???