Hi everybody, i would like to remove the devices encription under Security-Encryption
Under Encrypt device i've got Encrypted.
I've tried to restore to factory default, from recovery, from fastboot using format userdata, but, no way.
How i can remove the encryption?
My device is ZE552KL
Thanks
swet90 said:
Hi everybody, i would like to remove the devices encription under Security-Encryption
Under Encrypt device i've got Encrypted.
I've tried to restore to factory default, from recovery, from fastboot using format userdata, but, no way.
How i can remove the encryption?
My device is ZE552KL
Thanks
Click to expand...
Click to collapse
I had a same issue with this device, but I had some experiment.
If your device is unlocked, you can flash TWRP, boot to recovery, wipe, format data.
Backup your data first! It will erase all of your data (Very noob answer)
Totally careful, don't do this if you didn't want a unexpected things. Or something...
The ASUS Zenfone 3 comes shipped encrypted by default. This is required by Google's Play Services agreement for phone OEMs. You cannot remove decryption on the Zenfone 3 without using a custom ROM.
sensi277 said:
The ASUS Zenfone 3 comes shipped encrypted by default. This is required by Google's Play Services agreement for phone OEMs. You cannot remove decryption on the Zenfone 3 without using a custom ROM.
Click to expand...
Click to collapse
Thanks!
TWRP isn't allowing me to Mount my Storage because it's asking for a password I don't know.
ZeldaLinkAaron said:
TWRP isn't allowing me to Mount my Storage because it's asking for a password I don't know.
Click to expand...
Click to collapse
I'm having the same issue. I just got my daughter this phone (the 552KL?), downloaded the official Asus bootloader unlocker APK and ran it, then rebooted to the bootloader to flash TWRP.
TWRP installed, but wants a password to unlock it. Before the bootloader unlock, I did put her Google account on the phone, but the tool said it would completely wipe the phone. Either way, I tried her google account password, but it just says wrong password. Same thing when I tried to boot to system.
Any tips?
@Flapjack
Format through twrp
wang1chung said:
@Flapjack
Format through twrp
Click to expand...
Click to collapse
That's what I ended up doing. I got some help on another thread. The problem I'm having now is that I can't format /cache. It's really weird. If I do a full wipe on the phone, it says it can't format it. I even tried formatting it through fastboot ("fastboot erase cache" then "fastboot format cache"), which says "OKAY finished", but doesn't fix the issue when trying to wipe cache inside of TWRP.
This phone is flat out weird compared to other phones. I don't get the bootloader unlock screen. It doesn't seem to want to boot system... it just keeps going to TWRP. On the few times I have gotten to boot into system (after flashing Carbon 6.1 unofficial), it ends up hanging on a blank screen. Windows makes a sound that a new device is connected, so I'm guessing it's connecting in EDL mode or something (no devices show with a "fastboot devices" or a "adb devices").
I really don't know where to go from here. I'm used to working with Axons, Motorolas, and OnePlus phones. They just work.
@Flapjack
The cache issue is a glitch with the build of twrp, it's not a big deal. There's a workaround posted somewhere, can't remember. Just use the file browser and delete the files on it. I think there's only one file that isn't 0 bytes.
Have you flashed magisk?
Sometimes a full wipe (system/data) and then flashing the raw firmware helps. Try magisk first.
wang1chung said:
@Flapjack
The cache issue is a glitch with the build of twrp, it's not a big deal. There's a workaround posted somewhere, can't remember. Just use the file browser and delete the files on it. I think there's only one file that isn't 0 bytes.
Click to expand...
Click to collapse
So you're saying it doesn't need to be actually wiped, I just need to go into cache and delete all the files in there? How about getting it to boot to system? It just keeps booting to recovery. Not sure when it started that, as after the first time I flashed the ROM, I was able to get it to boot to system by pressing the power button when the "bootloader unlocked" screen came up. That isn't working now.
Have you flashed magisk?
Sometimes a full wipe (system/data) and then flashing the raw firmware helps. Try magisk first.
Click to expand...
Click to collapse
For my first non-stock ROM flash, I flashed the Oreo modem, Carbon 6.1 unofficial ROM, ARM64 Gapps nano, and Magisk 16.0... all at once. I tried booting and it looked like it was setting up... but as I mentioned, it just went to a blank screen. After trying a full wipe and seeing the "couldn't wipe cache" message, I figured that was why.
How will flashing Magisk help me with wiping the cache partition or getting the thing to boot right? Sorry for my ignorance.
Flapjack said:
So you're saying it doesn't need to be actually wiped, I just need to go into cache and delete all the files in there?
Click to expand...
Click to collapse
wiping/formatting cache is the same as deleting all the files. Wiping is easier but as I said, doesn't work at the moment.
Flapjack said:
How will flashing Magisk help me with wiping the cache partition or getting the thing to boot right? Sorry for my ignorance.
Click to expand...
Click to collapse
magisk won't help with cache, but it will remove the verity flag that is tripped from having twrp. From my experience, if I don't flash magisk, it'll bootloop.
Yeah.... absolutely nothing I do will get it to boot to system now. I've flashed the ROM and Magisk, but no matter what, it keeps booting to recovery.
There were two folders under /cache... "Lost&Found" and "recovery". I deleted both, but that didn't help.
---------- Post added 5th July 2018 at 12:40 AM ---------- Previous post was 4th July 2018 at 11:44 PM ----------
wang1chung said:
wiping/formatting cache is the same as deleting all the files. Wiping is easier but as I said, doesn't work at the moment.
Click to expand...
Click to collapse
So I take it I did it right? I would say it's "pretty much" the same. Formatting a partition is different than deleting files/folders in an existing partition. Still, if deleting the files/folders is good enough, then that rules out why the system wouldn't boot after the first ROM install attempt. It would also explain why "fastboot erase cache" seems to work, but TWRP still throws an error. Fastboot erase is probably working just fine.
magisk won't help with cache, but it will remove the verity flag that is tripped from having twrp. From my experience, if I don't flash magisk, it'll bootloop.
Click to expand...
Click to collapse
Is there a custom version of Magisk for this phone? I'm just installing the usual magisk 16.0 zip file you can get on their site, but it doesn't seem to be helping with the phone continuously booting into recovery. Is there a way to remove that verity flag via adb?
@Flapjack
Magisk modifies one of the partitions to get around the flag (I believe), not doable through adb.
Standard magisk off their site is fine
Try this:
Format system/data
Flash custom Rom
Flash magisk
"Wipe" cache and davlik
Reboot
OR
Flash the raw firmware
Flash twrp
Flash whichever custom Rom & gapps where needed
Flash magisk
Factory reset and "Wipe" cache and dalvik
Reboot
wang1chung said:
@Flapjack
Magisk modifies one of the partitions to get around the flag (I believe), not doable through adb.
Standard magisk off their site is fine
Try this:
Format system/data
Flash custom Rom
Flash magisk
"Wipe" cache and davlik
Reboot
Click to expand...
Click to collapse
No go. Still just boots into recovery. Here's what the boot screen looks like (then the Asus logo pops up, then recovery loads)
Code:
< More information :
Dm-Verity in EIO mode
Your device software can't be
checked for corruption. Please
lock the bootloader.
Visit this link on another device:
g.co/ABHg.co/placeholder
Your device will shutdown in 10 seconds
I can press the power button to boot immediately, or wait the 10 seconds... which just boots anyway (doesn't shut down). If I press the volume buttons, I get the following options menu:
Power off
Restart
Recovery
Fastboot
Back to previous page
Flash the raw firmware
Flash twrp
Flash whichever custom Rom & gapps where needed
Flash magisk
Factory reset and "Wipe" cache and dalvik
Reboot
Click to expand...
Click to collapse
I haven't tried this yet. Would this be the best guide to follow?
HOW-TO: Go back to Stock Rom on ZE552KL/ZE520KL
https://forum.xda-developers.com/zenfone-3/how-to/how-to-to-stock-rom-recovery-zenfone-3-t3666223
@Flapjack
That is the correct screen for an unlocked bootloader.
Try this guide for the raw firmware instead, and verify it boots to the OS. Then flash twrp and the rom again.
wang1chung said:
@Flapjack
That is the correct screen for an unlocked bootloader.
Try this guide for the raw firmware instead, and verify it boots to the OS. Then flash twrp and the rom again.
Click to expand...
Click to collapse
Grrr... no matter what I do, it won't flash. The guide says to put it in fastboot mode, but the flash tool won't detect it (even though "fastboot devices" shows it just fine). If I boot it to recovery, it'll show up in the tool, but never actually flashes (see screenshot).
Flapjack said:
Grrr... no matter what I do, it won't flash. The guide says to put it in fastboot mode, but the flash tool won't detect it (even though "fastboot devices" shows it just fine). If I boot it to recovery, it'll show up in the tool, but never actually flashes (see screenshot).
Click to expand...
Click to collapse
This is why I stopped using Windows. Maybe try disabling "driver signature verification"? Swap USB ports? My computer has some high power and low power USB ports, certain devices won't work properly in the low power ones. A couple of guides mentioned unplugging and re-plugging the USB.
wang1chung said:
This is why I stopped using Windows. Maybe try disabling "driver signature verification"? Swap USB ports? My computer has some high power and low power USB ports, certain devices won't work properly in the low power ones. A couple of guides mentioned unplugging and re-plugging the USB.
Click to expand...
Click to collapse
That's a good idea. I'm going through a powered hub right now, but who knows...
I'll try that as soon as I get home.
Ok, different computer. This is my laptop I normally use to flash.
This time, I can get it it to start to flash, but with a second or two, it throws an error (see attached).
Flapjack said:
Ok, different computer. This is my laptop I normally use to flash.
This time, I can get it it to start to flash, but with a second or two, it throws an error (see attached).
Click to expand...
Click to collapse
are you running ASUS flash tool with admin privileges?
Related
Hi everyone,
tonight I was trying to install the Stagefright OTA using this guide: http://forum.xda-developers.com/moto-x/general/xt1053-222-27-5-stagefright-ota-update-t3210786
The only thing I got was an android with a red triangle on it. So I went back, did a total phone reset, reinstalled the TWRP (fastboot flash twrp.img) and restored my backup. Sadly, the phone keeps rebooting to the TWRP as if there's nothing on it except the TWRP.
I've got the eu model and I can't find any factory image (or image in general) to flash on the device.
EDIT:
I manage to get something to work by simply boot via the "BT Tools" fastboot menu voice.
I don't exactly know why, but this way I manage to boot on a clean Android install and then restore my TWRP backup.
There's just a little problem: if I boot normally the system goes straight to the TWRP and won't boot.
I always need to go in the fastboot menu and select "BT Tools".
i was going through a similar reboot process last night. I realized that my issue was that I had xposed installed and had to uninstall it. however, I realized that after I wiped internal storage.
thus, my solution was to wipe everything (cache, dalvik, data, & internal storage), then mfastboot the stock ROM, then flash TWRP, then restore nandroid.
however, make sure to copy your nandroid to your computer first - you can transfer it back to the phone after flashing TWRP. you may have to perform a small nandroid via TWRP just to setup the right folder names, but you can still transfer the nandroid folder to your phone while the phone is in recovery.
hope this helps.
jco23 said:
i was going through a similar reboot process last night. I realized that my issue was that I had xposed installed and had to uninstall it. however, I realized that after I wiped internal storage.
thus, my solution was to wipe everything (cache, dalvik, data, & internal storage), then mfastboot the stock ROM, then flash TWRP, then restore nandroid.
however, make sure to copy your nandroid to your computer first - you can transfer it back to the phone after flashing TWRP. you may have to perform a small nandroid via TWRP just to setup the right folder names, but you can still transfer the nandroid folder to your phone while the phone is in recovery.
hope this helps.
Click to expand...
Click to collapse
First of all, thanks for your reply.
I manage to get something to work by simply boot via the "BT Tools" fastboot menu voice.
I don't exactly know why, but this way I manage to boot on a clean Android install and then restore my TWRP backup.
There's just a little problem: if I boot normally the system goes straight to the TWRP and won't boot.
I always need to go in the fastboot menu and select "BT Tools".
Any hint on why this is happening?
edmael said:
First of all, thanks for your reply.
I manage to get something to work by simply boot via the "BT Tools" fastboot menu voice.
I don't exactly know why, but this way I manage to boot on a clean Android install and then restore my TWRP backup.
There's just a little problem: if I boot normally the system goes straight to the TWRP and won't boot.
I always need to go in the fastboot menu and select "BT Tools".
Any hint on why this is happening?
Click to expand...
Click to collapse
you could be missing this line: mfastboot getvar max-download-size
I used the guide here: http://forum.xda-developers.com/moto-x/general/xt1060-lollipop-5-1-ota-fxz-thread-t3139519
granted, you appear to have a different model than mine, but the process should be the same.
jco23 said:
you could be missing this line: mfastboot getvar max-download-size
I used the guide here: http://forum.xda-developers.com/moto-x/general/xt1060-lollipop-5-1-ota-fxz-thread-t3139519
granted, you appear to have a different model than mine, but the process should be the same.
Click to expand...
Click to collapse
Yes, I skipped that line and removed it from the .xml of the images I flashed because I found some guides that suggested it.
Now I'm really tempted to re-flash everything using that command first.
edmael said:
Yes, I skipped that line and removed it from the .xml of the images I flashed because I found some guides that suggested it.
Now I'm really tempted to re-flash everything using that command first.
Click to expand...
Click to collapse
All removing that line does is prevent the system partition from error-ing out during the flashing process, which is why it's suggested to remove the line if you are using RSD-Lite to flash an image
mastarifla said:
All removing that line does is prevent the system partition from error-ing out during the flashing process, which is why it's suggested to remove the line if you are using RSD-Lite to flash an image
Click to expand...
Click to collapse
I flashed it using the -P option so I guess it's just the same as using that line, right?
Also: the removal of that line was not only in your guide so I immediatly deleted it
edmael said:
I flashed it using the -P option so I guess it's just the same as using that line, right?
Also: the removal of that line was not only in your guide so I immediatly deleted it
Click to expand...
Click to collapse
Flashing with mfastboot with the -P option is the same, you can verify the option exists by just typing in mfastboot in the command line, it will show you all the commands and what they do
I didn't want to have people dependent on using RSD-Lite (or any particular program) to flash the System Image, as it then makes a Windows machine the only thing possible to flash this image plus it uses Internal Moto Only software (legal issues), so I tried to find a better way to make mfastboot work properly for all types of computers
another thing I have noticed is that my phone kept getting stuck on the boot image screen (failed to proceed to the boot animation screen). to resolve this, I made sure to flash SU via TWRP after flashing my ROM via TWRP (or restoring a nandroid).
mastarifla said:
Flashing with mfastboot with the -P option is the same, you can verify the option exists by just typing in mfastboot in the command line, it will show you all the commands and what they do
I didn't want to have people dependent on using RSD-Lite (or any particular program) to flash the System Image, as it then makes a Windows machine the only thing possible to flash this image plus it uses Internal Moto Only software (legal issues), so I tried to find a better way to make mfastboot work properly for all types of computers
Click to expand...
Click to collapse
I really appreciated that (proud Linux User here), I tried mfastboot on Linux and even RSD-Lite on my Windows machine, but both of them failed to get my phone working with the files you provided in the other thread.
Now I'm stuck with this problem: every boot I need to select BT Tools and wait some minutes for my phone to boot.
I still don't get why it only boot in TWRP and I still don't get how to fix this
edmael said:
I really appreciated that (proud Linux User here), I tried mfastboot on Linux and even RSD-Lite on my Windows machine, but both of them failed to get my phone working with the files you provided in the other thread.
Now I'm stuck with this problem: every boot I need to select BT Tools and wait some minutes for my phone to boot.
I still don't get why it only boot in TWRP and I still don't get how to fix this
Click to expand...
Click to collapse
you may need to wipe internal storage and mfastboot everything from scratch...
jco23 said:
you may need to wipe internal storage and mfastboot everything from scratch...
Click to expand...
Click to collapse
Already did that (the first time I didn't even tried booting with BT Tools, but the effects were the same), but nothing new happened.
edmael said:
I really appreciated that (proud Linux User here), I tried mfastboot on Linux and even RSD-Lite on my Windows machine, but both of them failed to get my phone working with the files you provided in the other thread.
Now I'm stuck with this problem: every boot I need to select BT Tools and wait some minutes for my phone to boot.
I still don't get why it only boot in TWRP and I still don't get how to fix this
Click to expand...
Click to collapse
Have you tried flashing the TWRP System Backup that I provided? It may fix the issue that you are seeing currently
mastarifla said:
Have you tried flashing the TWRP System Backup that I provided? It may fix the issue that you are seeing currently
Click to expand...
Click to collapse
Yes, tried, but nothing happens (except that it boots when I go into BT Tools).
I think there's something wrong with my partition scheme because it always go straight to TWRP.
If I were on a GNU/Linux distro I'd check the grub config because it seems it boot from the wrong partition, but on Android I don't know if/how that's possible.
does it boot up when you flash the stock recovery? perhaps you may need to let it boot up first before installing TWRP?
did you happend to type "mfastboot flash boot twrp.img"? that could be the issue, as the command should be "mfastboot flash recovery twrp.img, right?
sorry I can't be more helpful, as I'm sure this is frustrating for you. just trying to grasp at straws here....
jco23 said:
does it boot up when you flash the stock recovery? perhaps you may need to let it boot up first before installing TWRP?
sorry I can't be more helpful, as I'm sure this is frustrating for you. just trying to grasp at straws here....
Click to expand...
Click to collapse
Don't be sorry, you're helping me!
Also: I'm not much frustrated since I have a working phone right now, I just need do avoid rebooting it
I tried to flash the stock recovery (found here: http://forum.xda-developers.com/moto-x/general/official-collection-firmwares-fxz-sbf-t3146628, used this: XT1052_GHOST_RETEU_5.1_LPA23.12-15_cid7_CFC.xml.zip) but if I'm not wrong (did that yesterday in the late night) it just booted to the Android with the red triangle on it (so, no booting for me).
EDIT:
No, I don't think I did that. But let's suppose I did, how can I revert it?
Also: is there a way to see my partition scheme so I'm sure everything's fine?
edmael said:
Don't be sorry, you're helping me!
EDIT:
No, I don't think I did that. But let's suppose I did, how can I revert it?
Also: is there a way to see my partition scheme so I'm sure everything's fine?
Click to expand...
Click to collapse
You can revert it by taking the boot.img from the 5.1 zip and flashing that using the command...
mfastboot flash boot boot.img
The partitioning you are mentioning is probably the gpt.bin, but that is typically done near the very beginning of the flashing process
here's what I would do:
boot into recovery
connect phone to PC, copy your nandroid and any other files from the SDcard to your PC
within recovery, wipe cache/dalvik/data/internal storage
reboot to bootloader
run the mfastboot commands as shown (but use the getvar-download....) in place of editing the xml zip file
after running the mfastboot commands, let the phone boot up to stock and establish itself
reboot to bootloader and flash TWRP
again, just a suggestion on what I would do - seems like @mastarifla is a great resource and is more knowledgeable than me, so maybe you'll get some confirmation.
good luck!
Ok, I still haven't solved this issue.
I tried with re-flashing everything, but I still get the problem.
I think it's a problem with the partition scheme because even by flashing just partition gpt.bin and motoboot.img when I launch reboot-bootloader it reboot the phone into TWRP.
I think the TWRP is in the wrong partition and/or I've got a wrong partition scheme, but I don't know how to check it or how to fix it.
edmael said:
Ok, I still haven't solved this issue.
I tried with re-flashing everything, but I still get the problem.
I think it's a problem with the partition scheme because even by flashing just partition gpt.bin and motoboot.img when I launch reboot-bootloader it reboot the phone into TWRP.
I think the TWRP is in the wrong partition and/or I've got a wrong partition scheme, but I don't know how to check it or how to fix it.
Click to expand...
Click to collapse
So your phone thinks that the bootloader is your recovery?
That is actually pretty strange, you could take a look at the Linux kernel on Motorola's GitHub and see if it has any info on the partitioning structure or what happens when a reboot-bootloader command is sent to the phone
It sounds as if the recovery and the bootloader swapped places, as the fastboot menu is considered a part of the bootloader, and if you are not seeing that on the hardware key bootup, then there is something definitely wrong, if you do reboot-recovery does it take you to the bootloader/fastboot menu?
After installing twrp using the one click root method, it restarted my V20 and I ended up in recovery mode (TWRP) and unable to boot into the OS. It seems I only have access to fastboot, download mode, and TWRP at this moment. I tried flashing the partitions with twrp, but twrp isn't realing my SD card for some odd reason, and I don't believe theres another way to move the file directly to the phone. I've been trying to work with "LG FlashTool" for hours, and keep getting the same error. Is there a reliable way to flash the OS through download mode? Thanks!
There is currently no way to flash those .tot images. What happens when you try to boot, where does it get stuck?
In TWRP you can connect to a PC and access the storage. Did you try moving the files that way?
slayerh4x said:
There is currently no way to flash those .tot images. What happens when you try to boot, where does it get stuck?
In TWRP you can connect to a PC and access the storage. Did you try moving the files that way?
Click to expand...
Click to collapse
I apologize for not checking my XDA notifications frequently enough.
I was able to copy over the .img system, boot, and recovery files to my internal storage when I was booted into TWRP then flashed them in TWRP.
Thanks for the help!
KingofPineCones said:
I apologize for not checking my XDA notifications frequently enough.
I was able to copy over the .img system, boot, and recovery files to my internal storage when I was booted into TWRP then flashed them in TWRP.
Thanks for the help!
Click to expand...
Click to collapse
I tried doing this and my system rebooted back into TWRP. Where did you get the files? Also did you ever get the encryption unsuccessful error? Whenever I install a system image or nandroid backup my phone reboots into TWRP.
crazyc78 said:
I tried doing this and my system rebooted back into TWRP. Where did you get the files? Also did you ever get the encryption unsuccessful error? Whenever I install a system image or nandroid backup my phone reboots into TWRP.
Click to expand...
Click to collapse
The encryption unsuccessful error was mentioned in the original TWRP form, you're just supposed to tap cancel and ignore it. It seems to happen every time you boot into TWRP. As for the .IMG files, I forgot where I got these but as soon as I find the post I'll be sure to give the creator credit. These worked perfectly for my H918.
Link to .zip file with the .img file-
https://drive.google.com/file/d/0B53iMlcsyyiKenAtT2k5STl0Umc/view?usp=drivesdk
(On mobile app or else I would've embedded it)
Boot into TWRP and push them through ADB into your device, then flash with TWRP. Make sure to flash system and recovery together, THEN REBOOT. If you flash system or recovery apart then reboot it might not work. I pushed them to /data/ and it worked for me. system.img is about 4GB if I remember correctly, so that one took a long time to push through ADB, about an hour and a half, just be prepared to wait a bit. Good luck!
KingofPineCones said:
The encryption unsuccessful error was mentioned in the original TWRP form, you're just supposed to tap cancel and ignore it. It seems to happen every time you boot into TWRP. As for the .IMG files, I forgot where I got these but as soon as I find the post I'll be sure to give the creator credit. These worked perfectly for my H918.
Link to .zip file with the .img file-
https://drive.google.com/file/d/0B53iMlcsyyiKenAtT2k5STl0Umc/view?usp=drivesdk
(On mobile app or else I would've embedded it)
Boot into TWRP and push them through ADB into your device, then flash with TWRP. Make sure to flash system and recovery together, THEN REBOOT. If you flash system or recovery apart then reboot it might not work. I pushed them to /data/ and it worked for me. system.img is about 4GB if I remember correctly, so that one took a long time to push through ADB, about an hour and a half, just be prepared to wait a bit. Good luck!
Click to expand...
Click to collapse
Thanks I appreciate the response, I was able to get my phone up and running by flashing a deodexed rom.
What are the commands to flash the stock system, boot image and recovery through fastboot? Is that what you used?
KingofPineCones said:
The encryption unsuccessful error was mentioned in the original TWRP form, you're just supposed to tap cancel and ignore it. It seems to happen every time you boot into TWRP. As for the .IMG files, I forgot where I got these but as soon as I find the post I'll be sure to give the creator credit. These worked perfectly for my H918.
Link to .zip file with the .img file-
https://drive.google.com/file/d/0B53iMlcsyyiKenAtT2k5STl0Umc/view?usp=drivesdk
(On mobile app or else I would've embedded it)
Boot into TWRP and push them through ADB into your device, then flash with TWRP. Make sure to flash system and recovery together, THEN REBOOT. If you flash system or recovery apart then reboot it might not work. I pushed them to /data/ and it worked for me. system.img is about 4GB if I remember correctly, so that one took a long time to push through ADB, about an hour and a half, just be prepared to wait a bit. Good luck!
Click to expand...
Click to collapse
So I downloaded this file you have in the reply... How can I flash the files in the zip through Fastboot? This currently is the only thing I can boot into to modify the system. The phone boots fine, but I cannot use ADB because it won't authorize the device. I have repeatedly tried killing the ADB server and restarting it, changed the USB ports to no avail... At this point, I cannot boot into TWRP even though it should be operational still.
andrewjt19 said:
So I downloaded this file you have in the reply... How can I flash the files in the zip through Fastboot? This currently is the only thing I can boot into to modify the system. The phone boots fine, but I cannot use ADB because it won't authorize the device. I have repeatedly tried killing the ADB server and restarting it, changed the USB ports to no avail... At this point, I cannot boot into TWRP even though it should be operational still.
Click to expand...
Click to collapse
Which TWRP version do you have? Is it RC8 or above? If its not then you are stuck until the TOT files can be used in LG UP or if we get a KDZ (Havent checked recently if a KDZ is available).
If you do there is a fail safe in TWRP (RC8 and above) that you boot to the LG factory reset and go through with it, TWRP does not execute the command and just boots to TWRP.
DarkestSpawn said:
Which TWRP version do you have? Is it RC8 or above? If its not then you are stuck until the TOT files can be used in LG UP or if we get a KDZ (Havent checked recently if a KDZ is available).
If you do there is a fail safe in TWRP (RC8 and above) that you boot to the LG factory reset and go through with it, TWRP does not execute the command and just boots to TWRP.
Click to expand...
Click to collapse
I'm running the latest version of TWRP not the RC8.
andrewjt19 said:
I'm running the latest version of TWRP not the RC8.
Click to expand...
Click to collapse
ONLY USE THIS METHOD IF YOU HAVE TWRP RC8 OR ABOVE INSTALLED!!!!! OTHERWISE YOU WILL ACTUALLY FACTORY RESET YOUR DEVICE!!!!!
While the device is powered off, press and hold Vol - and Power button. When you see the LG logo quickly release only the power button and re-press and hold the power button (Never let go of the Vol - button) This will boot you into the LG Factory reset screen. ONLY USE THIS METHOD IF YOU HAVE TWRP RC8 OR ABOVE INSTALLED!!!!! OTHERWISE YOU WILL ACTUALLY FACTORY RESET YOUR DEVICE!!!!! Choose yes to both options and you will be rebooted into TWRP. TWRP intercepts this command and ignores the factory reset part.
Will definitely give a shot. Thanks. I'll report back when I get to do it...
what are commands to flash the sys files
While I was on vacation my N6P (Android 6.01 MTC20L) decided it was time to give me the bootloop of death - talk about timing!
I have a recent backup I made via Flashfire saved on my PC but I need to get my phone booted - at least temporarily.
As I said my phone is on 6.01, but the fix offered by @XCnathan32 (https://forum.xda-developers.com/nexus-6p/general/guide-fix-nexus-6p-bootloop-death-blod-t3640279) is for Nougat and above. So what are my options?
- Should I use fastboot to upgrade to Nougat or Oreo then apply the fix?
- How do I dirty flash N or O without losing my data?
- Any ideas on the heating notion? Some people have had their phones working using a blow/hair dryer..is it dangerous to heat the phone? Will any parts get damaged?
Any response would be useful to me, thanks!
boeder9 said:
While I was on vacation my N6P (Android 6.01 MTC20L) decided it was time to give me the bootloop of death - talk about timing!
I have a recent backup I made via Flashfire saved on my PC but I need to get my phone booted - at least temporarily.
As I said my phone is on 6.01, but the fix offered by @XCnathan32 (https://forum.xda-developers.com/nexus-6p/general/guide-fix-nexus-6p-bootloop-death-blod-t3640279) is for Nougat and above. So what are my options?
- Should I use fastboot to upgrade to Nougat or Oreo then apply the fix?
- How do I dirty flash N or O without losing my data?
- Any ideas on the heating notion? Some people have had their phones working using a blow/hair dryer..is it dangerous to heat the phone? Will any parts get damaged? Any response would be useful to me, thanks!
Click to expand...
Click to collapse
More information would be useful to determine whether you really have BLOD or just bootlooping. What were you doing when it bootlooped? Was it just spontaneous? Are you able to access stock recovery or TWRP? Do you have a stable fastboot mode? If so, two options to try would be to use ADB to update using a newer version full OTA (eg. 7.0.0 (NRD90T)) or flash a full image (not OTA) with flash-all.bat, removing the -w (wipe) switch. Both of these methods will leave your data intact. If you don't have access to recovery mode (bootloops on selecting) or an unstable fastboot mode, then you are pretty much left with the hairdryer.
v12xke said:
More information would be useful to determine whether you really have BLOD or just bootlooping. What were you doing when it bootlooped? Was it just spontaneous? Are you able to access stock recovery or TWRP? Do you have a stable fastboot mode? If so, two options to try would be to use ADB to update using a newer version full OTA (eg. 7.0.0 (NRD90T)) or flash a full image (not OTA) with flash-all.bat, removing the -w (wipe) switch. Both of these methods will leave your data intact. If you don't have access to recovery mode (bootloops on selecting) or an unstable fastboot mode, then you are pretty much left with the hairdryer.
Click to expand...
Click to collapse
Thanks for the response.
- Phone was idle for a few moments thats when the bootlooping started.
- I was rooted (bootloader unlocked) with TWRP, I am unable to access it, takes me to the bootloop again
- What do you mean by stable fastboot. I can get to the fastboot mode by power button, volume down, remains there (if that's what you mean?)
boeder9 said:
Thanks for the response.
- Phone was idle for a few moments thats when the bootlooping started.
- I was rooted (bootloader unlocked) with TWRP, I am unable to access it, takes me to the bootloop again
- What do you mean by stable fastboot. I can get to the fastboot mode by power button, volume down, remains there (if that's what you mean?)
Click to expand...
Click to collapse
No access to Recovery mode is one hallmark of the BLOD. Without Recovery you have no ADB, even if it was enabled previously. Stable fastboot mode means you can actually flash something successfully and it completes before bootlooping again. Many people who are unlocked can start flashing, but it won't finish -or- flashing completes successfully, but the phone never boots up. Try the following: fastboot format your system, userdata, and cache and observe for errors. Do these 3 complete successfully? Next, fastboot FLASH the latest TWRP to your recovery partition.... errors? Try fastboot BOOT the same in an effort to get a working Recovery where you have some additional tools. If these fail, you are looking at either RMA if eligible or replacing the phone.
fastboot format system
fastboot format userdata
fastboot format cache
v12xke said:
No access to Recovery mode is one hallmark of the BLOD. Without Recovery you have no ADB, even if it was enabled previously. Stable fastboot mode means you can actually flash something successfully and it completes before bootlooping again. Many people who are unlocked can start flashing, but it won't finish -or- flashing completes successfully, but the phone never boots up. Try the following: fastboot format your system, userdata, and cache and observe for errors. Do these 3 complete successfully? Next, fastboot FLASH the latest TWRP to your recovery partition.... errors? Try fastboot BOOT the same in an effort to get a working Recovery where you have some additional tools. If these fail, you are looking at either RMA if eligible or replacing the phone.
fastboot format system
fastboot format userdata
fastboot format cache
Click to expand...
Click to collapse
Do these commands (espec system and userdata) erase my data and app data/personal files?
Ill try these and get back
boeder9 said:
Do these commands (espec system and userdata) erase my data and app data/personal files? Ill try these and get back
Click to expand...
Click to collapse
Formatting userdata will, but you won't be saving anything if you can't access recovery. If you like, try formatting system and cache first. Look for errors. Then try fastboot flashing or fastboot booting TWRP. The action of formatting each partition will tell you if there is a problem with the internal memory, and correct it (if possible).
v12xke said:
Formatting userdata will, but you won't be saving anything if you can't access recovery. If you like, try formatting system and cache first. Look for errors. Then try fastboot flashing or fastboot booting TWRP. The action of formatting each partition will tell you if there is a problem with the internal memory, and correct it (if possible).
Click to expand...
Click to collapse
OK so I did fastboot format cache, finished fine (see attached)
Haven't done format system, is it safe? what will the system formatting erase?
As for TWRP do you mean fastboot flash recovery twrp.img?
EDIT: after the cache format I'm getting 1-2 red LED flashes before each bootloop, is this the battery being down? If I turn off the device, hook up the charger it shows a full battery with electricity charge sign and phone boots again to bootloop.
boeder9 said:
OK so I did fastboot format cache, finished fine (see attached)
Haven't done format system, is it safe? what will the system formatting erase?
As for TWRP do you mean fastboot flash recovery twrp.img?
EDIT: after the cache format I'm getting 1-2 red LED flashes before each bootloop, is this the battery being down? If I turn off the device, hook up the charger it shows a full battery with electricity charge sign and phone boots again to bootloop.
Click to expand...
Click to collapse
System is a read only partition. Formatting it will not cause any data loss of yours, but will temporarily render the phone not bootable... BUT It can easily be restored via fastboot from any factory image. You just extract and flash the system image back to the system partition. Userdata is your personal data. When you format that partition your personal data will be gone. You did mention you had a FF backup so I'm guessing that was on the backup.
Yes on flashing TWRP. If after FLASHING twrp you cannot access Recovery, then try BOOTING recovery- fastboot boot recovery twrp.img
If you get to a point where nothing is working and you decide to format system and userdata and they complete successfully, you can flash a full Google image using flash-all.bat
Not sure about the LED's but just make sure your battery is close to fully charged. You didn't ever mention an battery issue, so there shouldn't be one. If in doubt hook the charger up and let it sit before proceeding.
@v12xke
Thank you for all your help. I left the phone on charge and let it bootloop for a good period of time and went out, came back and it was booted. I disabled the big clusters as suggested by @nicotinic in ElementalX and the device appears to be working fine aside from a little lag. I can live with that
Currently doing a little ADB pull, then will clear some space for a full nandroid backup!
Thanks a bunch to you both.
Hello ALL!
I normally don't message much because usually I can find most of my problems can be fixed by searching threads online. However, this particular case for me has been exhausting because through trial and error I have been unsuccessful in getting my 6T to boot into any rom normally.
I went from a stock T-Mobile to International version to LOS. The reason I did what I did was because I could get a IMEI or SIM to register on LOS. That worked fine on OOS 9.0.11. but as soon a I flash the latest LOS, no sim, bootloader, or IMEI detection.
I was rooted and unlocked. Now I am neither.
While on LOS, someone on another forum suggested to erase the persist partition and reflash to get the sim imei back so the phone would get service, when the phone rebooted it still didn't work and then the second time it rebooted it always gets stuck on the boot screen and never boots into the OS.
I tried to repair and reflash but was unsuccessful.
Since doing all of that, Ive reflashed using msm tool and although that was successful for OOS 9.0.11 and T-Mobile stock rom. It gets stuck on the boot screens for both.
I flashed LOS on A & B so I don't have a stock recovery.
I can't ADB anymore. I can only seem to connect via FASTBOOT but cannot seem to flash anything because the BOOTLOADER is now LOCKED.
How can I get this phone back to its original state? What ever the persist partition is. Removing it had made the phone non-bootable.
What can I do to fix? I greatly appreciate any help to get the phone operational again.
Thank you all!
https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
- Go to the thread linked above and download the latest OOS (.13) stable.
- Download latest Magisk.
- Have the latest TWRP .img downloaded and on-hand, you will use a few times as well as the installer .zip.
- Be sure to have adb/fastboot installed.
***BACK UP DATA, YOUR PHONE WILL BE WIPED. INTERNAL SD AS WELL***
***BACK UP DATA, YOUR PHONE WILL BE WIPED. INTERNAL SD AS WELL***
***BACK UP DATA, YOUR PHONE WILL BE WIPED. INTERNAL SD AS WELL***
- Put your phone into fastboot mode (reboot to bootloader).
- Go to the folder you downloaded in the first step and run the "flash all.bat".
- Ignore errors. If it's get stuck for more than 45 seconds, just hit enter to keep it going.
- OOS will boot. Go to settings, enable developer setting, enable advanced reboot and reboot bootloader again.
- Use "fastboot boot 'twrp-file-name'.img" to boot into TWRP.
- In TWRP, go to Reboot and changed the boot partition to the one NOT CURRENTLY enabled. In other words, switch boot partitions.
- Reboot bootloader.
- Go to the folder you downloaded in the first step and run the "flash all.bat" again.
- OOS will boot. Go to settings, enable developer setting, enable advanced reboot and reboot bootloader again.
- Use "fastboot boot 'twrp-file-name'.img" to boot into TWRP again.
- Move Magisk installer and TWRP installer from steps two and three onto the internal memory of your device.
- Flash TWRP, reboot recovery to make sure it sticks.
- Flash Magisk for root.
- Wipe dalvik and reboot system.
You will have the latest stable OOS on both partitions at this point! I literally just did this yesterday. Good luck!
..Cory.. said:
https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
- Go to the thread linked above and download the latest OOS (.13) stable.
- Download latest Magisk.
- Have the latest TWRP .img downloaded and on-hand, you will use a few times as well as the installer .zip.
- Be sure to have adb/fastboot installed.
***BACK UP DATA, YOUR PHONE WILL BE WIPED. INTERNAL SD AS WELL***
***BACK UP DATA, YOUR PHONE WILL BE WIPED. INTERNAL SD AS WELL***
***BACK UP DATA, YOUR PHONE WILL BE WIPED. INTERNAL SD AS WELL***
- Put your phone into fastboot mode (reboot to bootloader).
- Go to the folder you downloaded in the first step and run the "flash all.bat".
- Ignore errors. If it's get stuck for more than 45 seconds, just hit enter to keep it going.
- OOS will boot. Go to settings, enable developer setting, enable advanced reboot and reboot bootloader again.
- Use "fastboot boot 'twrp-file-name'.img" to boot into TWRP.
- In TWRP, go to Reboot and changed the boot partition to the one NOT CURRENTLY enabled. In other words, switch boot partitions.
- Reboot bootloader.
- Go to the folder you downloaded in the first step and run the "flash all.bat" again.
- OOS will boot. Go to settings, enable developer setting, enable advanced reboot and reboot bootloader again.
- Use "fastboot boot 'twrp-file-name'.img" to boot into TWRP again.
- Move Magisk installer and TWRP installer from steps two and three onto the internal memory of your device.
- Flash TWRP, reboot recovery to make sure it sticks.
- Flash Magisk for root.
- Wipe dalvik and reboot system.
You will have the latest stable OOS on both partitions at this point! I literally just did this yesterday. Good luck!
Click to expand...
Click to collapse
Thank you but how can I flash if my bootloader is locked? Everything I try fails.
I guess the real question is: How can I get the phone to turn on OEM UNLOCK so I can fastboot unlock the Bootloader if it wont boot up the OS?
Is there a way to fix it via the msmdownload tool? Custom file maybe? I've tried the files 9.0.11 & 12 OOS files and all I get is the boot screen white ball logo circling the red ball - stuck in loop and same with stock t-mobile rom.
My friend, sounds like you need to restore your EFS partitions
... I'm trying to figure out how the hell you successfully flashed MSM tool in EDL mode and not have ALL your partitions restored. That tool is supposed to literally write the phone as it came out of the box. Also I think there are different MSM tools for each device respectively, you did use the T-Mobile one right?
Causical said:
My friend, sounds like you need to restore your EFS partitions
... I'm trying to figure out how the hell you successfully flashed MSM tool in EDL mode and not have ALL your partitions restored. That tool is supposed to literally write the phone as it came out of the box. Also I think there are different MSM tools for each device respectively, you did use the T-Mobile one right?
Click to expand...
Click to collapse
My thoughts exactly. So, when it was on LOS I erased the persist partition and that really messed things up. So yes, how can I restore the partition back with a locked bootloader? Every time I've used MSM tool it fixes everything. This time no such luck. I flashed 9.0.11 & 12 and then I did the T-Mobile version. All only boot to the boot screen and hang. In doing so, I wasn't thinking if that failed and it locks the bootloader, then what? I saw an old video somewhere on a oneplus 2 or 3 where the person used the msm tool 3.0 and fixed a bricked locked bootloader phone. Similar to the fastboot method of reformatting. In the msm tool folder he had all the image files for all the partitions not sure if that the same thing as msm tool 4.0 with just one ops image file?
Anyway, is there a way to unlock the bootloader without booting into the OS? Or a way to restore the partitions via msm tool?
defcondoc said:
My thoughts exactly. So, when it was on LOS I erased the persist partition and that really messed things up. So yes, how can I restore the partition back with a locked bootloader? Every time I've used MSM tool it fixes everything. This time no such luck. I flashed 9.0.11 & 12 and then I did the T-Mobile version. All only boot to the boot screen and hang. In doing so, I wasn't thinking if that failed and it locks the bootloader, then what? I saw an old video somewhere on a oneplus 2 or 3 where the person used the msm tool 3.0 and fixed a bricked locked bootloader phone. Similar to the fastboot method of reformatting. In the msm tool folder he had all the image files for all the partitions not sure if that the same thing as msm tool 4.0 with just one ops image file?
Anyway, is there a way to unlock the bootloader without booting into the OS? Or a way to restore the partitions via msm tool?
Click to expand...
Click to collapse
Try this and tell me if it works.
Have you tried this dudes stuff? https://forum.xda-developers.com/oneplus-6t/how-to/op6t-collection-unbrick-tools-t3914746
... Not even sure what it is really, just says collection of unbrick tools.
_Masked_ said:
Try this and tell me if it works.
Click to expand...
Click to collapse
Yes, I did try that. That is what I just flashed with the msm tool. Gets stuck on the OOS boot animation.
Causical said:
Have you tried this dudes stuff? https://forum.xda-developers.com/oneplus-6t/how-to/op6t-collection-unbrick-tools-t3914746
... Not even sure what it is really, just says collection of unbrick tools.
Click to expand...
Click to collapse
Looks like the MSM tool. I'm going to give 9.0.13 a try but I'm thinking I may have the same problem.
Causical said:
Have you tried this dudes stuff? https://forum.xda-developers.com/oneplus-6t/how-to/op6t-collection-unbrick-tools-t3914746
... Not even sure what it is really, just says collection of unbrick tools.
Click to expand...
Click to collapse
Tried 9.0.13. Still gets stuck on OOS boot animation screen. There's got to be something to flash to fix this.
So you're booting EDL mode then flashing the MSM tool that exactly matches the way your phone came stock? At this point I would discontinue trying to convert it to international or upgrade the OS to a more recent version or any of that. I would focus on strictly flashing it to exactly the way you bought it.
Causical said:
So you're booting EDL mode then flashing the MSM tool that exactly matches the way your phone came stock? At this point I would discontinue trying to convert it to international or upgrade the OS to a more recent version or any of that. I would focus on strictly flashing it to exactly the way you bought it.
Click to expand...
Click to collapse
Yes. I did flash the stock T-Mobile ROM via the MSM tool. Freezes at the pink T-Mobile boot screen. Pretty sure the partitions need to be fixed but I thought the MSM tool would do that? I guess not. Is there a more advanced MSM tool where I can see what's being partitioned or is the MSM tool not doing any partitioning and that's why the phone is having the boot problem?
defcondoc said:
Yes. I did flash the stock T-Mobile ROM via the MSM tool. Freezes at the pink T-Mobile boot screen. Pretty sure the partitions need to be fixed but I thought the MSM tool would do that? I guess not. Is there a more advanced MSM tool where I can see what's being partitioned or is the MSM tool not doing any partitioning and that's why the phone is having the boot problem?
Click to expand...
Click to collapse
I know this is a stupid question but have you tried a factory reset in recovery mode? I know its a stupid question but I did not see it asked or noted.
Scott said:
I know this is a stupid question but have you tried a factory reset in recovery mode? I know its a stupid question but I did not see it asked or noted.
Click to expand...
Click to collapse
No stupid questions and I don't mind repeating answers to questions. I have tried that, but it does nothing. I get wipe cache or reboot to fastboot or reboot to recovery. When I choose system wipe, it takes 1 second to finish. It reboots and it gets stuck on the boot screen. Ever since persist partition was deleted it just freezes on startup and now that the bootloader is locked I cant seem to get anything to work. MSM tool I thought was supposed to fix this sort of thing but it has failed. Someone must know a way to get back into the OS so I can turn on OEM Unlock.
How do you know your bootloader is locked?
Causical said:
How do you know your bootloader is locked?
Click to expand...
Click to collapse
Fastboot says bootloader is locked. Shows it on the fastboot screen. Wont let me transfer any files from pc to phone. I can start the transfer process but it fails.
defcondoc said:
Fastboot says bootloader is locked. Shows it on the fastboot screen. Wont let me transfer any files from pc to phone. I can start the transfer process but it fails.
Click to expand...
Click to collapse
So you're able to enter EDL mode with a locked bootloader? How do you know your computer is seeing your device in EDL mode?
I'm going to place this here for myself for now. I'm just trying to understand your situation a little better, but this is just for later.... maybe, depending on your answer. https://forum.xda-developers.com/an...how-to-reboot-to-edl-fastboot-t3394292/page12
ALSO; If you don't mind can you link the thread that contains the original discussion where your problem began?
Causical said:
So you're able to enter EDL mode with a locked bootloader? How do you know your computer is seeing your device in EDL mode?
I'm going to place this here for myself for now. I'm just trying to understand your situation a little better, but this is just for later.... maybe, depending on your answer. https://forum.xda-developers.com/an...how-to-reboot-to-edl-fastboot-t3394292/page12
ALSO; If you don't mind can you link the thread that contains the original discussion where your problem began?
Click to expand...
Click to collapse
The point of EDL is to get around any restrictions or issues with the device, so yes, you can boot to EDL while locked. Your link will not help much because he can already get to EDL. Not to mention he will have no ADB access. Whatever he does, he has to fix it in EDL.
OP: Are you up and running yet? I am willing to try copying out my partition and sending to you.
Let me know...
---------- Post added at 08:12 PM ---------- Previous post was at 08:08 PM ----------
Wait, I just realized that my persist.img would not work because he has no way to flash it.
Nevermind.
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, fires, rigged elections, ligma,
* thermonuclear war, or your mom getting upset with you for being on the computer all day
Please
* Ensure you have an advanced understanding of this device before flashing it! YOU are choosing to make these modifications or your own free will.
*/
THIS GUIDE APPLIES TO JETER AND ALJETER DEVICES
FOR ALJETER DEVICE OWNERS ONLY.
there are ALOT of different variants of the aljeter so please before beginning this root method go to settings, system, about phone. look for either sw version or software channel verison and either remember what it says or write it down. me or anyone else will need this to help troubleshoot which aljeter variant you have. this will also be important to know incase you mess up and need to reflash stock firmware which those instructions are at the bottom of this guide.
The following devices have been confirmed to work on devices with Android 8 (Oreo)
XT1922-4 Model
XT1922-5 Brazilian Model
XT1922-7 Boost Mobile/ Virgin Mobile
XT1922-9 Motorola Retail
The following devices have been confirmed to work with Android 9 (pie)
XT1922-7 (Jeter) boost Mobile/ Virgin Mobile.
XT1922-3 (Aljeter)
XT1922-5 (Aljeter retbr)
Please make backups using TWRP IN CASE OF FAILURE.
Original stock firmware FOR JETER can be found here. https://mirrors.lolinet.com/firmware/moto/jeter/official/ and here FOR ALJETER https://mirrors.lolinet.com/firmware/moto/aljeter/official/
The steps listed in this process WILL wipe your userdata. If you have anything you need to save back it up first.
Prerequisite:
Unlocked bootloader.
FOR LINUX USERS. If you're using a linux distro then congrats this is all you should have to run. open command prompt and run this. "sudo apt-get install adb" without quotation marks. then follow Motorolas bootloader guide in provided link. continue to step 1 after.
FOR WINDOWS USERS.
ADB/Fastboot installed on your machine ( https://developer.android.com/studio...platform-tools ) If you have issues with commands make sure you have a current build of ADB and fastboot.
Minimal adb/fastboot v1.4.3 installer can be found here. https://androidfilehost.com/?fid=746010030569952951
Motorola bootloader unlock request here https://motorola-global-portal.custh...-your-device-a
DECRYPTION AND BACKUP.
NOTICE
IF YOU YOU ARE USING THE 32GB MODEL OR THE 16GB MODEL AND ARE ON ANDROID 9 (PIE) PLEASE USE THE ANDROID 9 (PIE) MODEL TWRP. USERS WITH THE 16GB MODEL AND THE 32GB MODEL ON ANDROID 8 (OREO) WILL STILL NEED TO USE SEPERATE TWRPS
MAKE SURE TO SWIPE RIGHT IN TWRP TO ALLOW SYSTEM MODIFICATIONS.
Step 1.) Download and extract twrp image to the ADB/Fastboot folder on your computer.
FOR ANDROID 8 (OREO)
16gb model twrp: https://www.androidfilehost.com/?fid=6006931924117921836
32gb model twrp: https://www.androidfilehost.com/?fid=6006931924117927211
FOR ANDROID 9 (PIE)
https://www.androidfilehost.com/?fid=6006931924117921849
Step 2.) Reboot to your bootloader. You can do this by turning on your device and holding the power button and volume down button at the same time.
Step 3.) Once the device reboots to the bootloader type the following from your computer with your phone connected via USB.
Code:
fastboot boot twrp.img
Step 4.) Once TWRP boots from your computer type (it may take a bit to boot because it is trying to decrypt your userdata, but it will fail and prompt for a password. Just click cancel)
Step 5.) time to backup your stock recovery and stock boot. use these commands one at a time.
Code:
adb pull /dev/block/platform/soc/7824900.sdhci/by-name/boot stockboot.img
adb pull /dev/block/platform/soc/7824900.sdhci/by-name/recovery stockrecovery.img
This will backup your stock boot and recovery images if you need to revert to stock later.
Step 6.) time to decrypt which will also format your data so make sure to make a backup. while still booted in twrp touch the "wipe" button then touch "format data", type yes and after its all done reboot to bootloader use this command.
Code:
adb reboot bootloader
CONGRATS! if you read this correctly and or didnt skim then you have successfully decrypted your device and backed up your stock recovery and stock boot.img. proceed below for root process.
ROOT PROCESS.
Step 1.) Run the following command from your computer to install the TWRP image to your device.
Code:
fastboot flash recovery twrp.img
Step 2.) Use the volume keys on the device to select boot to recovery and TWRP will boot up again. swipe right to allow modifications. IT SHOULD NOT ASK YOU FOR A PASSWORD THIS TIME IF IT DOES YOU MESSED UP DURING THE DECRYPT PROCESS
Step 3.) Follow this link to the creators site to download the disabler zip. https://zackptg5.com/android.php#disverfe download it to your ADB/Fastboot folder.
Step 4.) Download the Magisk Beta v20.0 and or the latest zip file from https://github.com/topjohnwu/Magisk/releases to your ADB/Fastboot folder. (I personally use beta so I use beta in this guide but you don't have to)
Step 5.) Run the following command to push the dm_verity force encrypt disabler and magisk zip to your device
Code:
adb push Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip /tmp
adb push Magisk-v20.0.zip /tmp
This will push the Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip and Magisk-v20.0.zip to your /tmp folder
Step 6.) Flash Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip from TWRP using the install option and navigate to the /tmp folder to select it and install it.
Step 7.) Flash Magisk-v20.0.zip from TWRP using the install option and navigate to the /tmp folder to select it and install it.
Step 8.) Reboot your device
Step 9.) Just wait for the device to boot up. might take a bit and it might seem its in a bootloop but if you followed this guide exactly as is just wait it out it took about 5-10 minutes before i got to the "lets get started" screen after updating to pie (android 9)
Step 10.) Verify Magisk Manager is installed and the root functionality works. sometimes the manager apk wont be installed so download the magisk manager apk from the provide links. click advanced to see if the boxes are unchecked. (2022 edit) If you see magisk app and magisk needs updated you can do it but I can't confirm if it's safe and what works and doesnt after
CONGRATS! IF YOU DIDNT SKIM MY GUIDE YOU SHOULD HAVE A SUCCESSFULLY ROOTED AND ENCRYPTION DISABLED DEVICE, HAVE FUN.
IF YOU MESSED UP, DIDNT PUT A COMMAND IN CORRECTLY, SKIMMED, OR ARE INA GENUINE BOOTLOOP/BRICK THIS SECTION IS FOR YOU
Step 1.) DOWNLOAD STOCK FIRMWARE HERE FOR JETER AND CERTAIN ALJETER DEVICES (from what i can tell usa variant aljeter devices are consided jeter) https://mirrors.lolinet.com/firmware/moto/jeter/official/ IF YOU REMEMBER OR WROTE DOWN YOUR SW CHANNEL VERSION THEN DOWNLOAD STOCK FIRMWARE FOR BASICALLY EVERY OTHER ALJETER DEVICE HERE. https://mirrors.lolinet.com/firmware/moto/aljeter/official/ UNZIP STOCK FIRMWARE TO YOUR ADB/FASTBOOT FOLDER TO FLASH IT. TO REVERT BACK TO STOCK YOU HAVE TO REFLASH STOCK FIRMWARE FROM THE BOOTLOADER if your device is bootlooped or bricked or not working right you have to reflash the stock firmware your device came with. PLEASE INPUT THESE COMMANDS ONE AT A TIME DO NOT DO THEM ALL AT ONCE. I KNOW ITS A HASSLE BUT IT GUARANTEES A SUCCESSFUL REFLASH. I CANNOT EMPHASIZE THIS ENOUGH
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastbot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash oem oem.img
fastboot flash vendor vendor.img
fastboot erase userdata
fastboot erase DDR
fastboot erase modemst1
fastboot erase modemst2
fastboot flash logo logo.bin
fastboot oem fb_mode_clear
fastboot reboot
Credits: @kwiksi1ver for making the original guide. @topjohnwu for magisk. @shimp208 for minimal adb/fastboot. @Spaceminer for providing the new twrps for 16gb and 32 gb devices, and @Zackptg5 for making the Universal DM-Verity, ForceEncrypt, Disk Quota Disablers.
QUICK NOTE/EDIT: SINCE I DO NOT OWN THIS DEVICE ANYMORE I CANNOT CONFIRM IT BUT YOU SHOULD BE ABLE TO UPDATE TO THE LATEST MAGISK 24.3 FROM THE MAGISK APP AFTER YOU INSTALL V20, AGAIN I AM NOT ABLE CONFIRM IF IT WORKS, CAUSES BOOTLOOPS, OR ANYTHING SO KEEP THAT IN MIND, but hopefully it does work for yall I've also updated the ADB commands for the disabler to reflect its latest version and I've updated the magisk link to topjohnwus GitHub as that's where all updates happen/ go first
RESERVED
In order to update the confirmed working models for this guide, if anyone that has this device with a unlocked bootloader and does root and decrypt successfully using my guide and it's not on the confirmed device list. PLEASE JUST PM ME and let me know. Please include device model number, name, and if on aljeter your software channel version.( For example. Xt1922-5 aljeter, sw channel: retbr)
following the instructions exactly gets me into a really weird bootloop where my phone boots twrp, shows some log and then reboots and does the same thing over and over
blowingoff said:
following the instructions exactly gets me into a really weird bootloop where my phone boots twrp, shows some log and then reboots and does the same thing over and over
Click to expand...
Click to collapse
I have the same issue. I used the recovery steps to go back to stock but every time i re-attempt to root/install twrp the bootloop comes back:
Also, it's failing to mount /data after Resurrection Remix wouldn't boot and it keeps giving me the unable to mount /data (invalid argument) problem. I need help badly. Can you help? Is it the TWRP's fault?
Kuntitled said:
I have the same issue. I used the recovery steps to go back to stock but every time i re-attempt to root/install twrp the bootloop comes back:
Also, it's failing to mount /data after Resurrection Remix wouldn't boot and it keeps giving me the unable to mount /data (invalid argument) problem. I need help badly. Can you help? Is it the TWRP's fault?
Click to expand...
Click to collapse
Are you encrypted? Because twrp will do that if you are. You have to use the wipe > format > type "yes" to continue method to remove encryption. Then reboot from twrp, directly back into twrp. Then it can mount /data properly, at which point you need to flash the encryption disabler. If you don't disable encryption you'll keep running into the same problem. You only have to do that once. After that you can use the regular wipe option. If you ever flash the stock vendor.img you'll need to do it again.
Also, please make sure twrp has been flashed to recovery. I don't think it'll work if you just boot through fastboot. If you followed all these instructions and magisk still refuses to install, or gives you a bootloop, then it's a ROM problem and not TWRP. Should that happen, let me know and I'll flash Resurrection remix and see if I can figure out what's going on. I've had ROMs refuse to be rooted before. Descendant ROM had this problem on some older builds.
Spaceminer said:
Are you encrypted? Because twrp will do that if you are. You have to use the wipe > format > type "yes" to continue method to remove encryption. Then reboot from twrp, directly back into twrp. Then it can mount /data properly, at which point you need to flash the encryption disabler. If you don't disable encryption you'll keep running into the same problem. You only have to do that once. After that you can use the regular wipe option. If you ever flash the stock vendor.img you'll need to do it again.
Also, please make sure twrp has been flashed to recovery. I don't think it'll work if you just boot through fastboot. If you followed all these instructions and magisk still refuses to install, or gives you a bootloop, then it's a ROM problem and not TWRP. Should that happen, let me know and I'll flash Resurrection remix and see if I can figure out what's going on. I've had ROMs refuse to be rooted before. Descendant ROM had this problem on some older builds.
Click to expand...
Click to collapse
as for me: I followed the instructions which tell us to only boot twrp during the data format and only then actually flash twrp.
but my problem is no magisk, as I always root my phone whenever i revert back to stock. it's just that decryption is not working on my xt1922-5
blowingoff said:
as for me: I followed the instructions which tell us to only boot twrp during the data format and only then actually flash twrp.
but my problem is no magisk, as I always root my phone whenever i revert back to stock. it's just that decryption is not working on my xt1922-5
Click to expand...
Click to collapse
Do it like this.
1. fastboot flash recovery twrp.img
2. Use the volume keys while still in fastboot to select "recovery" then hit the power button.
3. Hit cancel at the decryption screen when twrp boots up.
4. In TWRP select wipe > format > type "yes" to continue. Do not reboot the phone yet.
5. In twrp select reboot > recovery.
6. Once twrp boots up again, select mount and check the boxes for /data, /system, /vendor, /cache.
7. Now flash the universal encryption disabler.
8. Let it boot once, then go back into recovery and flash Magisk.
This should solve your problem.
Spaceminer said:
Do it like this.
1. fastboot flash recovery twrp.img
2. Use the volume keys while still in fastboot to select "recovery" then hit the power button.
3. Hit cancel at the decryption screen when twrp boots up.
4. In TWRP select wipe > format > type "yes"no to continue. Do not reboot the phone yet.
5. In twrp select reboot > recovery.
6. Once twrp boots up again, select mount and check the boxes for /data, /system, /vendor, /cache.
7. Now flash the universal encryption disabler.
8. Let it boot once, then go back into recovery and flash Magisk.
This should solve your problem.
Click to expand...
Click to collapse
My issue is as follows:
I had rooted my g6play months ago, back when pie came out on Ota for it. The guide I followed didn't have me disable encryption, which at the time wasn't a real big deal, with my only loss being the inability to do nandroid backups. But fast forward to now, when Resurrection Remix GSI came out, I was immediately interested as I think that rom could be a great experience.
So I decided to come here in this guide because I might as well disable encryption, right? So I flashed the new twrp and did get it to wipe and disable the encryption (in the option that has you type in yes) and proceeded to flash RR, it booted to the boot anima9and there it stayed for a good 30 minutes before I decided to try the older GSI image, maybe that one would work.
But nope, I immediately got the unable to mount /data bootloop and successfully flashed my stock rom and tried again, this time flashing the new twrp right off the bat. No avail. Now everytime i go into a freshly flashed twrp, i get no password prompt, and when i try to access the internal storage, it comes up as 0mb. Even my Linux complains that it couldn't mount my Internal storage as only the SD card shows up (weirdly enough I was able to successfully push dm verity and magisk to /temp no problem but they fail upon flashing)
Edit: gotta mention that after the first time I did the pull adb command to get the backups, the command refuses to work anymore. And also that I still have an old twrp backup stored (did that today before trying this)
Kuntitled said:
My issue is as follows:
I had rooted my g6play months ago, back when pie came out on Ota for it. The guide I followed didn't have me disable encryption, which at the time wasn't a real big deal, with my only loss being the inability to do nandroid backups. But fast forward to now, when Resurrection Remix GSI came out, I was immediately interested as I think that rom could be a great experience.
So I decided to come here in this guide because I might as well disable encryption, right? So I flashed the new twrp and did get it to wipe and disable the encryption (in the option that has you type in yes) and proceeded to flash RR, it booted to the boot anima9and there it stayed for a good 30 minutes before I decided to try the older GSI image, maybe that one would work.
But nope, I immediately got the unable to mount /data bootloop and successfully flashed my stock rom and tried again, this time flashing the new twrp right off the bat. No avail. Now everytime i go into a freshly flashed twrp, i get no password prompt, and when i try to access the internal storage, it comes up as 0mb. Even my Linux complains that it couldn't mount my Internal storage as only the SD card shows up (weirdly enough I was able to successfully push dm verity and magisk to /temp no problem but they fail upon flashing)
Edit: gotta mention that after the first time I did the pull adb command to get the backups, the command refuses to work anymore. And also that I still have an old twrp backup stored (did that today before trying this)
Click to expand...
Click to collapse
well i also couldnt make the backups, fastboot just tells me the file doesnt exist. and for the internal storage: while you are encrypted, that is how it works.
---------- Post added at 11:58 AM ---------- Previous post was at 11:42 AM ----------
blowingoff said:
well i also couldnt make the backups, fastboot just tells me the file doesnt exist. and for the internal storage: while you are encrypted, that is how it works.
Click to expand...
Click to collapse
Edit: i can not mount data, twrp says argument invalid. followed your instructions anyway and my phone still gets me to a bootloop to a "running OpenRecoveryScript" again.
blowingoff said:
well i also couldnt make the backups, fastboot just tells me the file doesnt exist. and for the internal storage: while you are encrypted, that is how it works.
---------- Post added at 11:58 AM ---------- Previous post was at 11:42 AM ----------
Edit: i can not mount data, twrp says argument invalid. followed your instructions anyway and my phone still gets me to a bootloop to a "running OpenRecoveryScript" again.
Click to expand...
Click to collapse
Go into the wipe menu, advanced wipe, check data and hit change file system. change data back to f2fs. When you guys format and don't immediately reboot straight to recovery, data sets to Auto and freaks out
Starkiller2 said:
Go into the wipe menu, advanced wipe, check data and hit change file system. change data back to f2fs. When you guys format and don't immediately reboot straight to recovery, data sets to Auto and freaks out
Click to expand...
Click to collapse
the multiple times i checked, the file system was always f2fs, but sometimes ext4
and also: Do you mean we should do that after we try to format with the format data (typing yes) option? If so, it doesn't work as the internal storage won't mount. Won't even show up on my computer
Kuntitled said:
the multiple times i checked, the file system was always f2fs, but sometimes ext4
and also: Do you mean we should do that after we try to format with the format data (typing yes) option? If so, it doesn't work as the internal storage won't mount. Won't even show up on my computer
Click to expand...
Click to collapse
If you change the file system, it'll format, even if it says it won't mount. Changing the file system will force it to format. Even if it says f2fs, hit change and select f2fs anyway.
If it doesn't, format from fastboot, boot system once then go to recovery
Starkiller2 said:
If you change the file system, it'll format, even if it says it won't mount. Changing the file system will force it to format. Even if it says f2fs, hit change and select f2fs anyway.
If it doesn't, format from fastboot, boot system once then go to recovery
Click to expand...
Click to collapse
Alright, let me work through this.
I'm currently on a stock firmware and it's working fine.
Right now i have to:
1. boot into recovery twrp
2. change the filesystem of data
3. flash recovery and boot into it
4. format data(yes option)
5.check and change the file system again
6.reboot straight back into twrp recovery from recovery
7.flash dm verity zip
8.flash magisk
9.boot
Is this correct? and as for attempting to install a GSI image again, should i attempt to flash it before the verity zip and magisk? (i'll also be flashing micro gapps) or do i let it boot into system once and then i do it? (by wiping data/dalvik/cache/system)
Kuntitled said:
Alright, let me work through this.
I'm currently on a stock firmware and it's working fine.
Right now i have to:
1. boot into recovery twrp
2. change the filesystem of data
3. flash recovery and boot into it
4. format data(yes option)
5.check and change the file system again
6.reboot straight back into twrp recovery from recovery
7.flash dm verity zip
8.flash magisk
9.boot
Is this correct? and as for attempting to install a GSI image again, should i attempt to flash it before the verity zip and magisk? (i'll also be flashing micro gapps) or do i let it boot into system once and then i do it? (by wiping data/dalvik/cache/system)
Click to expand...
Click to collapse
Let's simplify. If everything is working,
go to fastboot
Flash recovery (boot doesn't seem to be working here)
Fastboot flash recovery twrp image
Select recovery, when the decrypt menu comes up, hit cancel
Wipe menu,
Swipe to factory reset
Go back to wipe
format data, yes,
Reboot recovery
Flash disabler
Flash magisk
And yes. Boot system then GSI flash, then factory reset before magisk
---------- Post added at 01:44 PM ---------- Previous post was at 01:36 PM ----------
We'll get it figured out
Starkiller2 said:
Let's simplify. If everything is working,
go to fastboot
Flash recovery (boot doesn't seem to be working here)
Fastboot flash recovery twrp image
Select recovery, when the decrypt menu comes up, hit cancel
Wipe menu,
Swipe to factory reset
Go back to wipe
format data, yes,
Reboot recovery
Flash disabler
Flash magisk
And yes. Boot system then GSI flash, then factory reset before magisk
---------- Post added at 01:44 PM ---------- Previous post was at 01:36 PM ----------
We'll get it figured out
Click to expand...
Click to collapse
Do i check the file system for data at any point?
Kuntitled said:
Do i check the file system for data at any point?
Click to expand...
Click to collapse
Only if it won't mount
Starkiller2 said:
Only if it won't mount
Click to expand...
Click to collapse
does it matter where i flash disabler, magisk and GSI from? I've been doing it from my SD card
Kuntitled said:
does it matter where i flash disabler, magisk and GSI from? I've been doing it from my SD card
Click to expand...
Click to collapse
No that's fine
Starkiller2 said:
If you change the file system, it'll format, even if it says it won't mount. Changing the file system will force it to format. Even if it says f2fs, hit change and select f2fs anyway.
If it doesn't, format from fastboot, boot system once then go to recovery
Click to expand...
Click to collapse
Data is set to emmc file system, won't mount and filesystem won't change at all and won't format
Edit: only happens when i try to change it to f2fs, changed it to ext4 with no issues and it mounts sucessfully with ext4 but won't let me format data
I get the mkfs.f2fs -t 0 /dev/block/mmcblk0p56 error 1, unable to mount data whenever i try to change to f2fs. Has my previous failed attempt at installing GSI **** with my filesys?
Kuntitled said:
Data is set to emmc file system, won't mount and filesystem won't change at all and won't format
Edit: only happens when i try to change it to f2fs, changed it to ext4 with no issues
Click to expand...
Click to collapse
But data won't work as ext4, hence the boot loop
Try going to fastboot and typing
Fastboot -w
Then boot to recovery
---------- Post added at 02:10 PM ---------- Previous post was at 02:07 PM ----------
Kuntitled said:
Data is set to emmc file system, won't mount and filesystem won't change at all and won't format
Edit: only happens when i try to change it to f2fs, changed it to ext4 with no issues and it mounts sucessfully with ext4 but won't let me format data
I get the mkfs.f2fs -t 0 /dev/block/mmcblk0p56 error 1, unable to mount data whenever i try to change to f2fs. Has my previous failed attempt at installing GSI **** with my filesys?
Click to expand...
Click to collapse
I honestly don't see how, especially if stock is working