[ROM][v7.1.1] UOS for OnePlus 3 - OnePlus 3 ROMs, Kernels, Recoveries, & Other Devel

"Smarti-fy" your Android by giving it the access to UOS!
OnePlus warranty covers software modifications!
Smooth Rom
Better Camera
Better Experience
Battery Friendly
Initial Build!
​
Download ROM
Android 7.1.1
UOS Build´s for the OnePlus 3 (N)
Download GApps ARM64 7.1.1!
http://opengapps.org/
Installation instructions:
1. You must unlock your bootloader via fastboot.
2. You must have a custom recovery installed
3. Fully wipe your device from Recovery if you are not coming from LineageOS 14.1 [CM14.1] already.
4. Flash the downloaded ROM
5. Locate 7.1.1 Gapps from OpenGapps (Make sure it‘s arm64)
6. Reboot into recovery and install the ROM.
7. Thank me!
XDA:DevDB Information
UOS, ROM for the OnePlus 3
Contributors
cyberboy_sj
Source Code: https://github.com/UOS-By-Uteam
ROM OS Version: 7.x Nougat
Based On: LineageOS
Version Information
Status: Testing
Created 2017-01-01
Last Updated 2017-01-01

reserved

Screenshots!

I haven't checked whether first build boots or not
I'll Flash it and update once it boots!
Edit: It booted like a charm and i loved it's UI at first sight! What about you Guys?

cyberboy_sj said:
i havent checked whether fist build boots or not ! TRY AT YOUR OWN RISK
I am Flashing it and i will update once it boots!
Click to expand...
Click to collapse
I'm downloading and will give this a shot also

"Better camera" compared to stock ?

Test now Thx!!

Security settngs crash?

cyberboy_sj said:
I haven't checked whether first build boots or not
I'll Flash it and update once it boots!
Edit: It booted like a charm and i loved it's UI at first sight! What about you Guys?
Click to expand...
Click to collapse
Same here. Phone stays cool while downloading all my apps. Very smooth. However the uMind doesn't work for me. Nice job with this ROM.

cyberboy_sj said:
I haven't checked whether first build boots or not
I'll Flash it and update once it boots!
Edit: It booted like a charm and i loved it's UI at first sight! What about you Guys?
Click to expand...
Click to collapse
Does this have OMS support or even CMTE support? Also does it support f2fs? And lastly is forced encryption enabled on boot?

Downloading now . Thanks

Launcher is lacking a few options we come to expect such as grid size alterations and folderisation.
I love the system animations. Something different from the norm. Look really nice set to 1.5x too.
Security settings crash on clicking. Thankfully unknown sources is defaulted to yes, otherwise I wouldn't be restoring any apps from TB!
Sent from my unknown using XDA-Developers mobile app

For me, front camera isn't working

I'm going to give it a try.

I just flash it i love the launcher but i have found some bug i'il list them here
1. front camera and switching camera mod dosent work
2.alert slider dosent work
3.U mind seems to do nothing appart from disabeling power button
4.Compass dosent work
5.idk if its a bug or not but we cant connect to the filter shop
6.when going in the security tab it crash
7. the worst one the phone reboot if there is a headset plugged in and wont boot if we dont remove.
and its all that i have found for now sorry for potatoes english
i hope this can help you

kscjx said:
Does this have OMS support or even CMTE support? Also does it support f2fs? And lastly is forced encryption enabled on boot?
Click to expand...
Click to collapse
Lolteee said:
I just flash it i love the launcher but i have found some bug i'il list them here
1. front camera and switching camera mod dosent work
2.alert slider dosent work
3.U mind seems to do nothing appart from disabeling power button
4.Compass dosent work
5.idk if its a bug or not but we cant connect to the filter shop
6.when going in the security tab it crash
7. the worst one the phone reboot if there is a headset plugged in and wont boot if we dont remove.
and its all that i have found for now sorry for potatoes english
i hope this can help you
Click to expand...
Click to collapse
shaanu said:
For me, front camera isn't working
Click to expand...
Click to collapse
It was an initial build as i mentioned so Few bugs were expected :silly:
Sources are updated now...New features and a stable build will roll out soon Cheers!

and OnePlus 3T?

This isn't dead in the water is it? Because I really like the testing builds so far can't wait for stable

Please keep this ROM alive I love it

I'll like to get a flashable zip of your launcher please I think it's awesome

Related

[ROM][OP3][UNOFFICIAL] CyanogenMod 13 - odexed

Just another CyanogenMod rom – but odexed
This build of CM 13 for the OnePlus 3 is made with the sources of CyanogenMod
Special Features are:
Odexed
Navigation Bar always enabled like on Nexus devices
Home button enabled as well
Faster GPS fix
Changelog
Check on https://www.cmxlog.com/13/oneplus3/ for the latest changes
Installation instructions:
Download the latest build
https://www.androidfilehost.com/?w=files&flid=86101
Download Gapps
Take a nandroid backup
Recommended - Full wipe and factory reset
Flash ROM using latest Recovery
Flash Gapps
Reboot.
Enjoy!
* Note:
Don’t reboot in between flashing rom and Gapps
SuperSu is supported as well but is not needed
All credits belong to
CyanogenMod team
@Grarak, @dianlujitao ​
XDAevDB Information
CyanogenMod OnePlus 3, ROM for the OnePlus 3, Odexed
Sources
https://github.com/CyanogenMod
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: Unlocked bootloader, custom recovery
Version Information
Status: Nightly
Created 2016-07-28
Last Updated 2016-07-28
First of all, I’m not a developer and cannot really fix things. My work depends on the real CyanogenMod developers. I run builds on my build host because I like to have Android being Odexed like all stock roms are.
If we’re talking about the odex files, here are its advantages when compared to the deodex files.
• In case of odex files, apps start a lot faster since the preloading information is separately available to load directly to the Dalvik virtual machine. Where as in deodexed files, the boot times are significantly longer as the DVM has to decompile APKs at boot time to get the necessary information.
• The odexed APKs occupy less space when compared to the deodexed APKs, so they occupy less room in the system folder.
These builds will not be on a daily schedule but a few times a week. If you like my work please press thanks on the button beneath.
Latest build of today
cm-13.0-20160730-UNOFFICIAL-oneplus3.zip
From now on the files can be downloaded on Androidfilehost
https://www.androidfilehost.com/?w=files&flid=86101
Have fun
is it still possible to disable navbar? thanks
nadejo said:
is it still possible to disable navbar? thanks
Click to expand...
Click to collapse
That is possible, but you have to do that in the build.prop and the synaptics.kl files if necessary.
Thanks @Planet X good work!
Todays nightly is up on Androidfilehost.
https://www.androidfilehost.com/?fid=24591000424950852
There has been a lot of changes like DASH charging has been added and also the camera should work better now. You will find all the changes here https://www.cmxlog.com/13/oneplus3/
Let's find it out?
Thats what I have found so far:
DASH working !
DASH is working perfectly except for those of us who would like that "DASH charging" text and blue notification light.
- Gallery crash couple seconds after viewing recently taken image. Crashes hard triggering automatic reboot of the device.
- Cannot transfer files from/to PC through USB
Fix is:
Edit build.prop and remove ro.sdcardfs.enabled=true
Everything will work as usual.
New Build is up!
cm-13.0-20160730-UNOFFICIAL-oneplus3.zip
https://www.androidfilehost.com/?fid=24659325368664127
This includes the fix for File transfer to PC and tweaks for the camera.
Have fun
Which camera tweaks?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Steve has unmerged changes on Gerrit. I have merged that.
New Build is up!
cm-13.0-20160730-UNOFFICIAL-oneplus3.zip
https://www.androidfilehost.com/?fid=24659351692116054
It has the same date. I have deleted the earlier build.
There has been a lot of changes to the camera in the meanwhile today. My first experience is that even Snap is a good camera now. The flash works finally as it should and also noise seems to be reduced. After all, I 'm finally convinced that cm13 is capable of taking pictures in house and can be used for daily shots on my upcoming vacation too.
Enjoy the new build. Have fun
New Build is up!
cm-13.0-20160731-UNOFFICIAL-oneplus3.zip
https://www.androidfilehost.com/?fid=24659325368664296
Again with changes to the camera. Enjoy the new build
P.S: I was to early to submit. The upload took longer than expected.
Planet X said:
New Build is up!
cm-13.0-20160731-UNOFFICIAL-oneplus3.zip
Again with changes to the camera. Enjoy the new build
Click to expand...
Click to collapse
Hi Mister, link is missing for the other people
New Build is up!
cm-13.0-20160801-UNOFFICIAL-oneplus3.zip
https://www.androidfilehost.com/?fid=24659325368664383
Again camera fixes and outdoor overlay fixes.
Have fun
New Build is up!
cm-13.0-20160802-UNOFFICIAL-oneplus3.zip
https://www.androidfilehost.com/?fid=24659325368664512
With all the changes up to 18:00 CEST.
Have fun
I'm a bit concerned about the added feature blur on the lockscreen. Personally I like it more the way we had it before. What do you think about it? Should I remove it in my builds?
Planet X said:
I'm a bit concerned about the added feature blur on the lockscreen. Personally I like it more the way we had it before. What do you think about it? Should I remove it in my builds?
Click to expand...
Click to collapse
Personally, I like that feature
Sent from my ONEPLUS A3000 using Tapatalk
g_Four said:
Personally, I like that feature
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
Than I leave it as it is for now.
New build is up again.
cm-13.0-20160803-UNOFFICIAL-oneplus3.zip
https://www.androidfilehost.com/?fid=24665539028713513
This time with a lot of fixes and changes. Mainly the Them engine has been updated and we are updated to Android 6.0.1 Release 61 (MOB30Z).
It's a clean build again.
Have fun
Planet X said:
Than I leave it as it is for now.
New build is up again.
cm-13.0-20160803-UNOFFICIAL-oneplus3.zip
https://www.androidfilehost.com/?fid=24665539028713513
This time with a lot of fixes and changes. Mainly the Them engine has been updated and we are updated to Android 6.0.1 Release 61 (MOB30Z).
It's a clean build again.
Have fun
Click to expand...
Click to collapse
Thanks for update..
How about bug in gallery?
Sent from my ONEPLUS A3000 using Tapatalk
g_Four said:
Thanks for update..
How about bug in gallery?
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
As I use from time to time MTP for filetransfer between PC and Phone I have decided to disable sdcardfs in the sources until everything is fixed.
So we don't have that bug. You could still enable it in build.prop file if you like that.

[ROM] [Xs] [shumxin] FlyME 6 For OnePlus X

Flyme 6 Official beta builds are out.
Oficial beta Build (Xs)
ROM link: http://www.flyme.cn/firmwarelist-76.html
Direct Link : http://openrom-dl.flyme.cn/111732199/20180103/1514970843470/flyme_ONE-E1001_xs_6.7.12.29R-beta.zip
ROM features:
NewUI (obviously iOS clone)
Battery Optimization (Not bad)
Off screen gestures (except V for flash)
Bloated with chinese Apps (it's not a feature)
Hide App thumbnail in recent windows (not Hiding just Blurring)
Bugs:
No Developer Option (Its true, the dev just missed it LoL)
shumxin build:
Original Thread : http://www.oneplusbbs.com/forum.php...extra=page=1&filter=typeid&typeid=98&mobile=2
Link: https://pan.baidu.com/s/1hszeqws
Pswd: u2jv
My Opinion : Xs > shumxin
And I'm using it as daily drive.
Thanks to This post : https://forum.xda-developers.com/oneplus-x/general/flyme-official-beta-6-0-released-t3630820
AWESOME!!!!!!
Was waiting for it.
Please could somebody's test and report if it can be used as daily rom or to much things are buggy
Lol why do not you test yourself?
Only chinese download link?
Dizzyrul3z said:
Lol why do not you test yourself?
Click to expand...
Click to collapse
Chinese language otherwise no troubles to test myself
Thanks for share.
But no thank you.
828Mo the ROM is big... how top explain such... Even xiaomi ROM are lighter...
Please is Google play included should we add gapps?
No way to download this flyme rom
Mchasard said:
No way to download this flyme rom
Click to expand...
Click to collapse
Click the given link, use the password, and on the next screen don't click the blue button under the zip icon, click the white button on the top right, with the download icon (an arrow pointing down to a line) and the size of the rom next to it.
I've just flashed this rom. The UI is great, rom is smooth. But there are some problems of course. Gallery app is not working, I can take photo but can't open it in gallery. And the sd card does not seems to show up. But good thing is since it based on H2OS, I can flash Arsenic kernel and it's working fine. Do not disturb mode is always enabled, I can't turn it off, but phone still rang.
Edit: sd card does not show up in default explorer, but it shows and working in Solid Explorer. Both flashing open gapps and magisk are working fine.
namquang93 said:
I've just flashed this rom. The UI is great, rom is smooth. But there are some problems of course. Gallery app is not working, I can take photo but can't open it in gallery. And the sd card does not seems to show up. But good thing is since it based on H2OS, I can flash Arsenic kernel and it's working fine. Do not disturb mode is always enabled, I can't turn it off, but phone still rang.
Edit: sd card does not show up in default explorer, but it shows and working in Solid Explorer. Both flashing open gapps and magisk are working fine.
Click to expand...
Click to collapse
Nice! Did you check if data, gps, bluetooth are working fine?
jackshot said:
Nice! Did you check if data, gps, bluetooth are working fine?
Click to expand...
Click to collapse
data and gps are working fine. I don't use bluetooth so I'm not sure.
Please could someone make a mirror cause I'm not able to get the ROM file zip with the link in the thread...
Thanks in advance
Screenshots plz
drsudarshanbk said:
Screenshots plz
Click to expand...
Click to collapse
"Screenshots are in the Chinese forum"... It is is written right in the first post!
Click the link
Just flashed.. Great animations, graphics, sounds and a unique feeling in general.
BUT! This rom asks for every single app for internet and location permissions! from calendar to gallery and notes, in music app and so on.. And if you don't to give permissions there is only an "exit" option and you can't use the app! Maybe it's safe but it seems to me a little shady.
There are many chinese apps preinstalled which explains the size of the rom.
Furthermore some notifications are in chinese and you don't get what they say.
I flashed opengapps after flashing the rom with no success, so I used a google installer from their store and it worked just fine..
Photos from the camera are stretched and Gallery doesn't show anything as mentioned..
wifi/bluetooth/data works fine.
Just updated the post.
details on the ROM: UI experience is unique compared to the other custom ROMs available, but very similar to H2OS. The only difference is that Flyme's launcher has tons of themes online (I hated all of them tho). ROM is really good as a daily, it contains both camera apps, OnePlus' one and Meizu's one. And after enabling Google services via the Google Installer apk, there are no issues either. And any kernel for OOS 3 will work on this ROM; I'm using Arsenic kernel. I've also flashed Magisk v13.1 and it is working without any problems with Greenify and Naptime running
meraj99 said:
details on the ROM: UI experience is unique compared to the other custom ROMs available, but very similar to H2OS. The only difference is that Flyme's launcher has tons of themes online (I hated all of them tho). ROM is really good as a daily, it contains both camera apps, OnePlus' one and Meizu's one. And after enabling Google services via the Google Installer apk, there are no issues either. And any kernel for OOS 3 will work on this ROM; I'm using Arsenic kernel. I've also flashed Magisk v13.1 and it is working without any problems with Greenify and Naptime running
Click to expand...
Click to collapse
Can you please share link for google installer!!

A Failure Rom for s6/s6edge(G92xF/I)

A-FAILURE'S-ROM For G92xF/I​Disclaimer
This rom is "Not" designed by me. Its from my friend Dheeraj Reddy. I'm just sharing it in xda. Hope u guys like it. And as usual we are not responsible for your bricked devices or thermonuclear war or blah blah blah....lol
DHEERAJ REDDY : Hello everyone
This is my first ever rom but stable no bugs with the latest kernal
(so called kernal)from So Called Engineer.
Based on latest stock s6 edge firmware (june 2018 patch)
Romfeatures:
Rom is fully odexed
Heavily debloated
Contains all the edge screen features
contains galaxy apps so you can download edge panels and camera filters
Better battery(added some battery tweaks)
Better smoothness
zipaligned
internal Busybox script
added s9 launcher
added night theme by default
Added plus messenger by default
added pie calculator
added screen resolution in settings
removed all bloatware and useless apps
Added a lots of csctweaks likes
1.data usage view on quick panel
2.internet speed indicator
3.recent app protection
4.few messaging tweaks
5.and a lot more....
Added lot of build.prop tweaks for better battery
Improved camera qualityand a lot.
So called kernal is added in rom for balanced battery and better ram mangment
(from @So Called Engineer released 11-11-18).
Installation procedure
1.make a clean wipe
2.flash rom
3.If you are flat user then you need to flash your flat kernel
4.flash magisk or super su (**this is must)
reboot enjoy
First boot will take 6-8 mins
i recommend u to use brevent app from playstore for more battery
and universal gms doze if you like.
Credits:
my special thanks to my bro,friend and teacher @So Called Engineer for teaching me and helping and answering every silly questions that i asked and udit karode for helping me.
And to all the other developers whose mods that I've included in this Rom...
DownloadLink:-
A Failure rom
Mirror
Mirror 1
Press Thanks button:good: if u like it
Telegram link
Come join our good community for more latest updates about our good old s6
Universal s6 Rom and Kernel Development
XDA:DevDB Information
A Failure Rom for s6/s6 edge, ROM for the Samsung Galaxy S6
Contributors
So Called Engineer
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Current Stable Version: v 1.0
Stable Release Date: 2018-11-12
Created 2018-11-12
Last Updated 2018-11-12
First of all THNX for the rom.
Had some installation problems:
First time installing rom it was stuck at 95%
Second time installing rom it was stuck at "next"
Third time installing rom it keeps on booting up everytime (could not go past Samsung Galaxy S6 Edge logo)
fourth time installing rom everything went normal, after 5min on Samsung logo device booted and could go on with the settings.
Will test how the rom performs but everything seems smooth for now, soo thnx again!
edit: and yes I flashed magisk!
Aelliaria said:
First of all THNX for the rom.
Had some installation problems:
First time installing rom it was stuck at 95%
Second time installing rom it was stuck at "next"
Third time installing rom it keeps on booting up everytime (could not go past Samsung Galaxy S6 Edge logo)
fourth time installing rom everything went normal, after 5min on Samsung logo device booted and could go on with the settings.
Will test how the rom performs but everything seems smooth for now, soo thnx again!
edit: and yes I flashed magisk!
Click to expand...
Click to collapse
It's aroma issue.ill inform him
So Called Engineer said:
Disclaimer
This rom is "Not" designed by me. Its from my friend Dheeraj Reddy. I'm just sharing it in xda.
Click to expand...
Click to collapse
The Development section is for developers to post their own work. ROM shares go in the General section.
THREAD MOVED
the Doctor said:
The Development section is for developers to post their own work. ROM shares go in the General section.
THREAD MOVED
Click to expand...
Click to collapse
Sorry...I don't know that.It won't happen again.
So Called Engineer said:
It's aroma issue.ill inform him
Click to expand...
Click to collapse
3 things I found so far that are not working or working correctly
1. Wifi network is not saved, so everytime I disable wifi, shut down the phone, or connect to another wifi and want to go back I have to login again. No big problem only irritating.
2. Samsung App store not working (but this is no problem for me just letting you know).
3. Samsung theme is not working, probably because of the night theme? (but also no problem for me, I like the night theme again only letting you know).
Have one question "flashing Magisk or superSU is a must", but after that can I unroot? or will that end in a bootloop? because I can't use snapchat now, I think I need to install snapchat and login before I install Magisk to get it work.
Again thnx for sharing the rom, and thank your friend for me!
Aelliaria said:
3 things I found so far that are not working or working correctly
1. Wifi network is not saved, so everytime I disable wifi, shut down the phone, or connect to another wifi and want to go back I have to login again. No big problem only irritating.
2. Samsung App store not working (but this is no problem for me just letting you know).
3. Samsung theme is not working, probably because of the night theme? (but also no problem for me, I like the night theme again only letting you know).
Have one question "flashing Magisk or superSU is a must", but after that can I unroot? or will that end in a bootloop? because I can't use snapchat now, I think I need to install snapchat and login before I install Magisk to get it work.
Again thnx for sharing the rom, and thank your friend for me!
Click to expand...
Click to collapse
1.Flash so called kernel.the one I'm sharing now is latest one.and the one that is used in the Rom is old one...
Link: https://forum.xda-developers.com/ga...led-kernel-t3865682/post78125243#post78125243
Note:- you can use other kernel too instead of mine...
2.yes galaxy app is crashing...you can delete it in system/app or privapp..forgot it's location.? But u can delete it there.
3.It's Weird issue. Other users didn't faced it but I'll let him know.
4.to use snap chat while on root is pretty simple.
Goto magisk manager tap on top left corner(side bar)
Go to magisk hide and search for Snapchat and tick it..now you can use Snapchat without issue
Note:- Before doing this you should install Snapchat freshly and do not open it..After installing it from play store directly go to magisk manager and do the steps as I told...now u .can open Snapchat and use it.
Hope it helps....?
So Called Engineer said:
4.to use snap chat while on root is pretty simple.
Goto magisk manager tap on top left corner(side bar)
Go to magisk hide and search for Snapchat and tick it..now you can use Snapchat without issue
Note:- Before doing this you should install Snapchat freshly and do not open it..After installing it from play store directly go to magisk manager and do the steps as I told...now u .can open Snapchat and use it.
Hope it helps....
Click to expand...
Click to collapse
Already tried that, but is not working. Just tried to uninstall magisk but could not boot up(as expected but had to try ) So no snapchat for me i'm guessing
edit: after uninstlling magisk manager I could login to snapchat. and then installing magisk manager again and both work fine!
And flashing your kernel from the link fixed wifi problem
Thnx for your help!
So Called Engineer said:
It's aroma issue.ill inform him
Click to expand...
Click to collapse
I want to install this rom on my s6 edge.. any update on above issue that it is solved or not?
Aashirg said:
I want to install this rom on my s6 edge.. any update on above issue that it is solved or not?
Click to expand...
Click to collapse
You can try it...only a few times this problem is occurring.
So Called Engineer said:
You can try it...only a few times this problem is occurring.
Click to expand...
Click to collapse
I have installed it on my phone and it installed fine. But after first restart, in initial setup it keeps showing the screen " checking for updates" and never goes on next screen. I have checked reinstalling the rom 2, 3 times and changing the kernel but same problem is happening.
Aashirg said:
I have installed it on my phone and it installed fine. But after first restart, in initial setup it keeps showing the screen " checking for updates" and never goes on next screen. I have checked reinstalling the rom 2, 3 times and changing the kernel but same problem is happening.
Click to expand...
Click to collapse
Ok first of all do not connect to internet or wifi during initial setupwizard(first boot) and check it...
So Called Engineer said:
Ok first of all do not connect to internet or wifi during initial setupwizard(first boot) and check it...
Click to expand...
Click to collapse
I checked it without internet but it is asking for internet connection to continue setup....
can you add bitrate mod to camera app?
Win98and95 said:
can you add bitrate mod to camera app?
Click to expand...
Click to collapse
Presently this Rom is not in development...
uhm I have a problem. when setting up the phone... everything is mirrored and my hardware buttons don't work.
Did I do something wrong?
OniFG16 said:
uhm I have a problem. when setting up the phone... everything is mirrored and my hardware buttons don't work.
Did I do something wrong?
Click to expand...
Click to collapse
U flashed wrong kernel..flash the kernel that supports ur device and go to dialer and type *#2663# and u will see a window and on that there will be a button called touchfwupdate...tap on it...everything will work fine
@So Called Engineer good evening and good evening everyone,
the ROM looks interesting. I read that battery consumption is optimized, excellent. Have any problems been found on the 920f?

[How-To] Flash Havoc and Evolution GSI with bluetooth audio fix

There is no official custom ROM zip for our realme x2 pro devices at the moment. But I found that evolution GSI is the most stable, beautiful, and feature-rich of all those treble GSI. So I'm writing this guide to share u how to flash Evolution and Havoc latest GSI build. I hope u guys enjoy it and all credit goes to @natedogg20050 for making this possible. As always, do it at your own risk. This is my first guide so if I did something wrong please feel free to point me out.
Evolution GSI - Gapps included and pixel-like ROM
Havoc GSI - No Gapps and more AOSP like
Both have a lot of customization
What is not working - Bluetooth in-call audio, Double-tap to wake, 90hz display, fingerprint reader, auto-brightness, low maximum brightness but still very usable.
What is working - I found it pretty stable and everything is working for my daily use, and battery life is amazing. AOD and Bluetooth media work with some fix.
So let's get started.
1.U need to unlock the bootloader first. if u haven't yet, please follow this amazing guide. Also, install TWRP too.
[url]https://forum.xda-developers.com/realme-x2-pro/how-to/guide-unlocking-bootloader-to-getting-t4010189[/URL]
2.Once your bootloader is unlocked u can follow this guide up to step 3 which pushes fstab.qcom.
[url]https://forum.xda-developers.com/realme-x2-pro/how-to/how-to-flash-aosp-android-10-gsi-realme-t4036825[/URL]
3. And For Bluetooth media fix u have to remove /vendor/overlay/BluetoothResCommon.apk in TWRP before flashing GSI. Mount vendor and delete it from TWRP file manager. and edit /vendor/build.prop after boot up as the following guide. U can skip step 2. ( u have to delete it before flashing GSI or your Bluetooth will be broken, make sure to backup build.prop and bluetoothRes files in case something goes wrong).
[url]https://forum.xda-developers.com/project-treble/trebleenabled-device-discussion/guide-fix-bluetooth-audio-a2dp-aptx-gsi-t3950938[/URL]
4. Before Flashing Havoc or Evolution GSIs, u have to flash Zygote fix and permissiver_v5 file which I'll attach below.
5. Then Flash Evolution GSI and Magisk zip. Format and reboot to system. For Havoc GSI u may need BitGapp if u want google services, make sure u boot up the system first and flash BitGapp later. (use Phh's magisk, i'll attach it below)
6. For always on display u can follow this guide. Make sure u use the file from comment if u want AOD it said only android 8.1 but it work for me in Evolution GSI, nigh-light also works.
[url]https://forum.xda-developers.com/project-treble/trebleenabled-device-development/overlay-enable-night-light-adaptive-t3741965[/URL]
Please read each guide carefully and follow my step, so that u won't brick your device. I'm very happy with this ROM considering it is not an official ROM for our device. For 90 Hz display, I found some clue but we need a dev for it.
Evolution GSI - https://sourceforge.net/projects/ex...RM64AB-10.0-20200112-2300-GSI.img.xz/download
Havoc GSI - https://sourceforge.net/projects/ex...-OS-v3.1-20200121-ARM64AB-GSI.img.xz/download
(Our device use AB GSIs)
Can you take screenshots?
guskakashi said:
Can you take screenshots?
Click to expand...
Click to collapse
https://drive.google.com/folderview?id=1226dCdS9SC5bq_U_l5d2GiTW3X_7tDur
Screenshots for evolution ?
ospeto said:
6. For always on display u can follow this guide. Make sure u use the file from comment if u want AOD it said only android 8.1 but it work for me in Evolution GSI, nigh-light also works.
[url]https://forum.xda-developers.com/project-treble/trebleenabled-device-development/overlay-enable-night-light-adaptive-t3741965[/URL]
Click to expand...
Click to collapse
Thanks for the guide!
I looked for AOD for a while. It is working fine on my phone. However, I noticed the AOD position is pretty much static. Does it move on your screen? Worried about the burn-in if AOD always stays at one position.
I simply removed
Code:
/vendor/overlay/BluetoothResCommon.apk
in TWRP AFTER flashing PE GSI 10, it's been working like a charm! thanks for your post!
coo1one said:
Thanks for the guide!
I looked for AOD for a while. It is working fine on my phone. However, I noticed the AOD position is pretty much static. Does it move on your screen? Worried about the burn-in if AOD always stays at one position.
Click to expand...
Click to collapse
U can change different clock in widget - clock. Changing twice a week should be a solution for burn in. U can also change clock and date font in evolution setting.
coo1one said:
I simply removed in TWRP AFTER flashing PE GSI 10, it's been working like a charm! thanks for your post!
Click to expand...
Click to collapse
It is ok if u delete before booting up. ?
I don't mind using 60hz, what about fast charging ? Trusted faces?
Can we really use it as a daily driver?
And when a developer is going to work on this lovely hardware, ****ty software device?
I came from pocophone, i can't stand color os for a whole minute.
mostafa asal said:
I don't mind using 60hz, what about fast charging ? Trusted faces?
Can we really use it as a daily driver?
And when a developer is going to work on this lovely hardware, ****ty software device?
I came from pocophone, i can't stand color os for a whole minute.
Click to expand...
Click to collapse
Fast charging working. There is no trusted face in android 10 anymore because of security reason. If u flash android 9 gsi u may get it. I am using it as daily driver.
Is fingerprint working on both GSIs?
Apoorv AR said:
Is fingerprint working on both GSIs?
Click to expand...
Click to collapse
Nope
I can't edit build.prop because vendor is only read and can't be changed to write(evolutionx gsi)
talalahmed said:
I can't edit build.prop because vendor is only read and can't be changed to write(evolutionx gsi)
Click to expand...
Click to collapse
Copy build.prop and edit it in another file. Mount vendor in twrp. Then use twrp file manager to replace it. It should work.
But i think u can also skip that step too. Just delete that app before booting up with clean-flash installed rom.
ospeto said:
Copy build.prop and edit it in another file. Mount vendor in twrp. Then use twrp file manager to replace it. It should work.
But i think u can also skip that step too. Just delete that app before booting up with clean-flash installed rom.
Click to expand...
Click to collapse
Yeah I did that but when I reboot the Bluetooth is still not working so I'll just flash a new pixel experience gsi that might have fingerprint sensor working and will do that also before booting up
U dont need to do it again when u flash new rom cuz vendor partition will still the same even if u flash new rom on system.
ospeto said:
U dont need to do it again when u flash new rom cuz vendor partition will still the same even if u flash new rom on system.
Click to expand...
Click to collapse
Thanks,did you try this new pixel experience gsi with fingerprint?
talalahmed said:
Thanks,did you try this new pixel experience gsi with fingerprint?
Click to expand...
Click to collapse
Not yet and i honestly dont think fp will work. It is an overlay issue related with fp drivers as far as i know. It wont magically fixed with just an update from gsi.
ospeto said:
Not yet and i honestly dont think fp will work. It is an overlay issue related with fp drivers as far as i know. It wont magically fixed with just an update from gsi.
Click to expand...
Click to collapse
I thought that too,but will try it anyway and keep you updated
Edit: nevermind, haven't seen it was stated in op
Hello friends, is there a way to solve the A2DP Bluetooth problem? I can connect to my car radio, but no music is played and I cannot make calls. The cell phone is recognized by the radio and vice versa. I have a ZUK Edge and I am currently using EvoX 10. Everything works great, except for Bluetooth. It doesn't matter which GSI I use, EvoX, Havoc, Bootlegers, Aosp, ExtendetUI, etc., it works with RR 6.1, but from Android 9 onwards it doesn't matter what I flash. Please excuse my poor English, but I wrote with a translator. If someone has a solution, please let me know. Thank you in advance.

Mi Note 10 Lite - ArrowOS - Vanilla - GApps - Android 13 - Unofficial - Custom Rom

Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
Clean installation:
Flash android 13 compatible recovery
Make sure you have MIUI 13.0.4.0 Global on your device.
Flash rom
Format data
Reboot
Sources:
ROM: https://github.com/ArrowOS/android_manifest
Kernel: https://github.com/vantoman/kernel_xiaomi_sm6150/tree/13Our Dev Group
Download:
Recovery (Download from here)
Vanilla https://drive.google.com/file/d/1IVIfCiFzi3i9nPT1p_pRiu9X45QFL1Kc/view?usp=share_link
GApps: https://drive.google.com/file/d/1EaZ7Bhft_6HNYb4vGuLeh0lwMT4YZy7l/view?usp=sharing
Our Dev Group
Known Issues:
Camera 0.6x mode
R/W access?
camera crash's on 0.6X
leodexe said:
R/W access?
Click to expand...
Click to collapse
wdym
love arrow and Elixir. cant wait to try this one
Vanilla have Google service ?
0951615114 said:
Vanilla have Google service ?
Click to expand...
Click to collapse
No. Not even setup
utkurei19 said:
No. Not even setup
Click to expand...
Click to collapse
Install gapp is possible.
0951615114 said:
Install gapp is possible.
Click to expand...
Click to collapse
Because of erofs ( read only file system ) it is not possible unless you use magisk
Right now I am on MIUI 13.0.6 should I go back to MIUI 13.0.4 to try this rom? Is there any difference?
simoxx1997 said:
Right now I am on MIUI 13.0.6 should I go back to MIUI 13.0.4 to try this rom? Is there any difference?
Click to expand...
Click to collapse
You can install it right now but this rom got some camera bugs be aware of that
utkurei19 said:
You can install it right now but this rom got some camera bugs be aware of that
Click to expand...
Click to collapse
i have the same bug that i got with all the others roms that i have found on this forum, when I use the fingerprint sensor it max out the brightness of my device. I really want to use custom roms but it's the same every time
simoxx1997 said:
i have the same bug that i got with all the others roms that i have found on this forum, when I use the fingerprint sensor it max out the brightness of my device. I really want to use custom roms but it's the same every time
Click to expand...
Click to collapse
Did you use proper firmware?
Plus you can erase vendor, system, system_ext, product, boot and install 13.0.4.0 again
I've already tried to flash 13.0.4 but no luck... I don't know why, MIUI works fine without any bug but every cutom ROM I've tried have the same bug on my device.
simoxx1997 said:
I've already tried to flash 13.0.4 but no luck... I don't know why, MIUI works fine without any bug but every cutom ROM I've tried have the same bug on my device.
Click to expand...
Click to collapse
Its not only on your device, this bug is on every custom ROM, FOD not working properly (brightness max, when use), its not so big problem, but its not nice and i can't ignore it, so, original ROM is better in this case. Arrow is perfect, nice, clean and very good working ROM, better than MIUI, but FOD problem is very uncomfortable.
Review after 1 month, this ArrowOS ROM work almost perfectly, it's extremly fast and light, I've rooted it with Magisk and didn't got any issue EXEPT that the camera crash everytime I take a photo (the photo is still taken tho) or record a video. It's only with the Android camera.
If someone now how to fix it I will be glad to know. Exept that the best ROM i've tested for my device

Categories

Resources